Message ID | 1425645402-4766-1-git-send-email-chris@chris-wilson.co.uk (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi On Fri, Mar 6, 2015 at 1:36 PM, Chris Wilson <chris@chris-wilson.co.uk> wrote: > Since the beginning, sysfs/connector/status has done a heavyweight > detection of the current connector status. But no user, such as upowerd > or logind, has ever desired to initiate a probe. Move the probing into a > new attribute so that existing readers get the behaviour they desire. > > v2: David Herrmann suggested using "echo detect > /sys/.../status" to > trigger the probing, which is a fine idea. This extends that to also > allow the user to apply the force detection overrides at runtime. > > v3: Now with airlied's email address fixed! Requires sysfs_streq() > > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> > Cc: Daniel Vetter <daniel.vetter@ffwll.ch> > Cc: David Herrmann <dh.herrmann@gmail.com> > Cc: Dave Airlie <airlied@redhat.com> > Cc: Alex Deucher <alexdeucher@gmail.com> > --- > drivers/gpu/drm/drm_sysfs.c | 61 +++++++++++++++++++++++++++++++++++++++------ > 1 file changed, 53 insertions(+), 8 deletions(-) Looks good to me: Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Thanks David > diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c > index 5c99d3773212..ffc305fc2076 100644 > --- a/drivers/gpu/drm/drm_sysfs.c > +++ b/drivers/gpu/drm/drm_sysfs.c > @@ -166,23 +166,68 @@ void drm_sysfs_destroy(void) > /* > * Connector properties > */ > -static ssize_t status_show(struct device *device, > +static ssize_t status_store(struct device *device, > struct device_attribute *attr, > - char *buf) > + const char *buf, size_t count) > { > struct drm_connector *connector = to_drm_connector(device); > - enum drm_connector_status status; > + struct drm_device *dev = connector->dev; > + enum drm_connector_status old_status; > int ret; > > - ret = mutex_lock_interruptible(&connector->dev->mode_config.mutex); > + ret = mutex_lock_interruptible(&dev->mode_config.mutex); > if (ret) > return ret; > > - status = connector->funcs->detect(connector, true); > - mutex_unlock(&connector->dev->mode_config.mutex); > + old_status = connector->status; > + > + if (sysfs_streq(buf, "detect")) { > + connector->force = 0; > + connector->status = connector->funcs->detect(connector, true); > + } else if (sysfs_streq(buf, "on")) { > + connector->force = DRM_FORCE_ON; > + } else if (sysfs_streq(buf, "on-digital")) { > + connector->force = DRM_FORCE_ON_DIGITAL; > + } else if (sysfs_streq(buf, "off")) { > + connector->force = DRM_FORCE_OFF; > + } else > + ret = -EINVAL; > + > + if (ret == 0 && connector->force) { > + if (connector->force == DRM_FORCE_ON || > + connector->force == DRM_FORCE_ON_DIGITAL) > + connector->status = connector_status_connected; > + else > + connector->status = connector_status_disconnected; > + if (connector->funcs->force) > + connector->funcs->force(connector); > + } > + > + if (old_status != connector->status) { > + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", > + connector->base.id, > + connector->name, > + old_status, connector->status); > + > + dev->mode_config.delayed_event = true; > + if (dev->mode_config.poll_enabled) > + schedule_delayed_work(&dev->mode_config.output_poll_work, > + 0); > + } > + > + mutex_unlock(&dev->mode_config.mutex); > + > + return ret; > +} > + > +static ssize_t status_show(struct device *device, > + struct device_attribute *attr, > + char *buf) > +{ > + struct drm_connector *connector = to_drm_connector(device); > > return snprintf(buf, PAGE_SIZE, "%s\n", > - drm_get_connector_status_name(status)); > + drm_get_connector_status_name(connector->status)); > } > > static ssize_t dpms_show(struct device *device, > @@ -339,7 +384,7 @@ static ssize_t select_subconnector_show(struct device *device, > drm_get_dvi_i_select_name((int)subconnector)); > } > > -static DEVICE_ATTR_RO(status); > +static DEVICE_ATTR_RW(status); > static DEVICE_ATTR_RO(enabled); > static DEVICE_ATTR_RO(dpms); > static DEVICE_ATTR_RO(modes); > -- > 2.1.4 >
On Fri, Mar 6, 2015 at 7:36 AM, Chris Wilson <chris@chris-wilson.co.uk> wrote: > Since the beginning, sysfs/connector/status has done a heavyweight > detection of the current connector status. But no user, such as upowerd > or logind, has ever desired to initiate a probe. Move the probing into a > new attribute so that existing readers get the behaviour they desire. > > v2: David Herrmann suggested using "echo detect > /sys/.../status" to > trigger the probing, which is a fine idea. This extends that to also > allow the user to apply the force detection overrides at runtime. > > v3: Now with airlied's email address fixed! Requires sysfs_streq() > > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> > Cc: Daniel Vetter <daniel.vetter@ffwll.ch> > Cc: David Herrmann <dh.herrmann@gmail.com> > Cc: Dave Airlie <airlied@redhat.com> > Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> > --- > drivers/gpu/drm/drm_sysfs.c | 61 +++++++++++++++++++++++++++++++++++++++------ > 1 file changed, 53 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c > index 5c99d3773212..ffc305fc2076 100644 > --- a/drivers/gpu/drm/drm_sysfs.c > +++ b/drivers/gpu/drm/drm_sysfs.c > @@ -166,23 +166,68 @@ void drm_sysfs_destroy(void) > /* > * Connector properties > */ > -static ssize_t status_show(struct device *device, > +static ssize_t status_store(struct device *device, > struct device_attribute *attr, > - char *buf) > + const char *buf, size_t count) > { > struct drm_connector *connector = to_drm_connector(device); > - enum drm_connector_status status; > + struct drm_device *dev = connector->dev; > + enum drm_connector_status old_status; > int ret; > > - ret = mutex_lock_interruptible(&connector->dev->mode_config.mutex); > + ret = mutex_lock_interruptible(&dev->mode_config.mutex); > if (ret) > return ret; > > - status = connector->funcs->detect(connector, true); > - mutex_unlock(&connector->dev->mode_config.mutex); > + old_status = connector->status; > + > + if (sysfs_streq(buf, "detect")) { > + connector->force = 0; > + connector->status = connector->funcs->detect(connector, true); > + } else if (sysfs_streq(buf, "on")) { > + connector->force = DRM_FORCE_ON; > + } else if (sysfs_streq(buf, "on-digital")) { > + connector->force = DRM_FORCE_ON_DIGITAL; > + } else if (sysfs_streq(buf, "off")) { > + connector->force = DRM_FORCE_OFF; > + } else > + ret = -EINVAL; > + > + if (ret == 0 && connector->force) { > + if (connector->force == DRM_FORCE_ON || > + connector->force == DRM_FORCE_ON_DIGITAL) > + connector->status = connector_status_connected; > + else > + connector->status = connector_status_disconnected; > + if (connector->funcs->force) > + connector->funcs->force(connector); > + } > + > + if (old_status != connector->status) { > + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", > + connector->base.id, > + connector->name, > + old_status, connector->status); > + > + dev->mode_config.delayed_event = true; > + if (dev->mode_config.poll_enabled) > + schedule_delayed_work(&dev->mode_config.output_poll_work, > + 0); > + } > + > + mutex_unlock(&dev->mode_config.mutex); > + > + return ret; > +} > + > +static ssize_t status_show(struct device *device, > + struct device_attribute *attr, > + char *buf) > +{ > + struct drm_connector *connector = to_drm_connector(device); > > return snprintf(buf, PAGE_SIZE, "%s\n", > - drm_get_connector_status_name(status)); > + drm_get_connector_status_name(connector->status)); > } > > static ssize_t dpms_show(struct device *device, > @@ -339,7 +384,7 @@ static ssize_t select_subconnector_show(struct device *device, > drm_get_dvi_i_select_name((int)subconnector)); > } > > -static DEVICE_ATTR_RO(status); > +static DEVICE_ATTR_RW(status); > static DEVICE_ATTR_RO(enabled); > static DEVICE_ATTR_RO(dpms); > static DEVICE_ATTR_RO(modes); > -- > 2.1.4 >
On Fri, Mar 06, 2015 at 08:58:40AM -0500, Alex Deucher wrote: > On Fri, Mar 6, 2015 at 7:36 AM, Chris Wilson <chris@chris-wilson.co.uk> wrote: > > Since the beginning, sysfs/connector/status has done a heavyweight > > detection of the current connector status. But no user, such as upowerd > > or logind, has ever desired to initiate a probe. Move the probing into a > > new attribute so that existing readers get the behaviour they desire. > > > > v2: David Herrmann suggested using "echo detect > /sys/.../status" to > > trigger the probing, which is a fine idea. This extends that to also > > allow the user to apply the force detection overrides at runtime. > > > > v3: Now with airlied's email address fixed! Requires sysfs_streq() > > > > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> > > Cc: Daniel Vetter <daniel.vetter@ffwll.ch> > > Cc: David Herrmann <dh.herrmann@gmail.com> > > Cc: Dave Airlie <airlied@redhat.com> > > Cc: Alex Deucher <alexdeucher@gmail.com> > > Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Merged to drm-misc, thanks. -Daniel > > > --- > > drivers/gpu/drm/drm_sysfs.c | 61 +++++++++++++++++++++++++++++++++++++++------ > > 1 file changed, 53 insertions(+), 8 deletions(-) > > > > diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c > > index 5c99d3773212..ffc305fc2076 100644 > > --- a/drivers/gpu/drm/drm_sysfs.c > > +++ b/drivers/gpu/drm/drm_sysfs.c > > @@ -166,23 +166,68 @@ void drm_sysfs_destroy(void) > > /* > > * Connector properties > > */ > > -static ssize_t status_show(struct device *device, > > +static ssize_t status_store(struct device *device, > > struct device_attribute *attr, > > - char *buf) > > + const char *buf, size_t count) > > { > > struct drm_connector *connector = to_drm_connector(device); > > - enum drm_connector_status status; > > + struct drm_device *dev = connector->dev; > > + enum drm_connector_status old_status; > > int ret; > > > > - ret = mutex_lock_interruptible(&connector->dev->mode_config.mutex); > > + ret = mutex_lock_interruptible(&dev->mode_config.mutex); > > if (ret) > > return ret; > > > > - status = connector->funcs->detect(connector, true); > > - mutex_unlock(&connector->dev->mode_config.mutex); > > + old_status = connector->status; > > + > > + if (sysfs_streq(buf, "detect")) { > > + connector->force = 0; > > + connector->status = connector->funcs->detect(connector, true); > > + } else if (sysfs_streq(buf, "on")) { > > + connector->force = DRM_FORCE_ON; > > + } else if (sysfs_streq(buf, "on-digital")) { > > + connector->force = DRM_FORCE_ON_DIGITAL; > > + } else if (sysfs_streq(buf, "off")) { > > + connector->force = DRM_FORCE_OFF; > > + } else > > + ret = -EINVAL; > > + > > + if (ret == 0 && connector->force) { > > + if (connector->force == DRM_FORCE_ON || > > + connector->force == DRM_FORCE_ON_DIGITAL) > > + connector->status = connector_status_connected; > > + else > > + connector->status = connector_status_disconnected; > > + if (connector->funcs->force) > > + connector->funcs->force(connector); > > + } > > + > > + if (old_status != connector->status) { > > + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", > > + connector->base.id, > > + connector->name, > > + old_status, connector->status); > > + > > + dev->mode_config.delayed_event = true; > > + if (dev->mode_config.poll_enabled) > > + schedule_delayed_work(&dev->mode_config.output_poll_work, > > + 0); > > + } > > + > > + mutex_unlock(&dev->mode_config.mutex); > > + > > + return ret; > > +} > > + > > +static ssize_t status_show(struct device *device, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct drm_connector *connector = to_drm_connector(device); > > > > return snprintf(buf, PAGE_SIZE, "%s\n", > > - drm_get_connector_status_name(status)); > > + drm_get_connector_status_name(connector->status)); > > } > > > > static ssize_t dpms_show(struct device *device, > > @@ -339,7 +384,7 @@ static ssize_t select_subconnector_show(struct device *device, > > drm_get_dvi_i_select_name((int)subconnector)); > > } > > > > -static DEVICE_ATTR_RO(status); > > +static DEVICE_ATTR_RW(status); > > static DEVICE_ATTR_RO(enabled); > > static DEVICE_ATTR_RO(dpms); > > static DEVICE_ATTR_RO(modes); > > -- > > 2.1.4 > >
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 5c99d3773212..ffc305fc2076 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -166,23 +166,68 @@ void drm_sysfs_destroy(void) /* * Connector properties */ -static ssize_t status_show(struct device *device, +static ssize_t status_store(struct device *device, struct device_attribute *attr, - char *buf) + const char *buf, size_t count) { struct drm_connector *connector = to_drm_connector(device); - enum drm_connector_status status; + struct drm_device *dev = connector->dev; + enum drm_connector_status old_status; int ret; - ret = mutex_lock_interruptible(&connector->dev->mode_config.mutex); + ret = mutex_lock_interruptible(&dev->mode_config.mutex); if (ret) return ret; - status = connector->funcs->detect(connector, true); - mutex_unlock(&connector->dev->mode_config.mutex); + old_status = connector->status; + + if (sysfs_streq(buf, "detect")) { + connector->force = 0; + connector->status = connector->funcs->detect(connector, true); + } else if (sysfs_streq(buf, "on")) { + connector->force = DRM_FORCE_ON; + } else if (sysfs_streq(buf, "on-digital")) { + connector->force = DRM_FORCE_ON_DIGITAL; + } else if (sysfs_streq(buf, "off")) { + connector->force = DRM_FORCE_OFF; + } else + ret = -EINVAL; + + if (ret == 0 && connector->force) { + if (connector->force == DRM_FORCE_ON || + connector->force == DRM_FORCE_ON_DIGITAL) + connector->status = connector_status_connected; + else + connector->status = connector_status_disconnected; + if (connector->funcs->force) + connector->funcs->force(connector); + } + + if (old_status != connector->status) { + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", + connector->base.id, + connector->name, + old_status, connector->status); + + dev->mode_config.delayed_event = true; + if (dev->mode_config.poll_enabled) + schedule_delayed_work(&dev->mode_config.output_poll_work, + 0); + } + + mutex_unlock(&dev->mode_config.mutex); + + return ret; +} + +static ssize_t status_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct drm_connector *connector = to_drm_connector(device); return snprintf(buf, PAGE_SIZE, "%s\n", - drm_get_connector_status_name(status)); + drm_get_connector_status_name(connector->status)); } static ssize_t dpms_show(struct device *device, @@ -339,7 +384,7 @@ static ssize_t select_subconnector_show(struct device *device, drm_get_dvi_i_select_name((int)subconnector)); } -static DEVICE_ATTR_RO(status); +static DEVICE_ATTR_RW(status); static DEVICE_ATTR_RO(enabled); static DEVICE_ATTR_RO(dpms); static DEVICE_ATTR_RO(modes);
Since the beginning, sysfs/connector/status has done a heavyweight detection of the current connector status. But no user, such as upowerd or logind, has ever desired to initiate a probe. Move the probing into a new attribute so that existing readers get the behaviour they desire. v2: David Herrmann suggested using "echo detect > /sys/.../status" to trigger the probing, which is a fine idea. This extends that to also allow the user to apply the force detection overrides at runtime. v3: Now with airlied's email address fixed! Requires sysfs_streq() Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexdeucher@gmail.com> --- drivers/gpu/drm/drm_sysfs.c | 61 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 53 insertions(+), 8 deletions(-)