diff mbox

[v4] spi: qup: Add DMA capabilities

Message ID 1425463325-25805-1-git-send-email-stanimir.varbanov@linaro.org (mailing list archive)
State Accepted
Commit 612762e82ae6058d69b4ce734598491bf030afe7
Headers show

Commit Message

Stanimir Varbanov March 4, 2015, 10:02 a.m. UTC
From: Andy Gross <agross@codeaurora.org>

This patch adds DMA capabilities to the spi-qup driver.  If DMA channels are
present, the QUP will use DMA instead of block mode for transfers to/from SPI
peripherals for transactions larger than the length of a block.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
---

v3 -> v4
 - correct error path when setting to reset state fails

Third version can be found at https://lkml.org/lkml/2015/2/27/369
v2 -> v3
 - now using one dma done callback on rx channel if bidirectional transfer
   and on tx channel if only transmit transfer
 - rearranged the spi_qup_transfer_one() in order to reuse wait for
   completion and completion init code
 - move dma init function early in .probe to avoid controller reset if
   probe deffer
 - add function to get controller mode
   
Second version can be found at https://lkml.org/lkml/2015/2/24/316

--------------------------------------------------------------------------------
v1 -> v2
This is reworked version with comments addressed
 - use SPI core DMA mapping code
 - implemented .can_dma callback
 - use dmaengine api's to account deferred_probe

First version can be found at https://lkml.org/lkml/2014/6/26/481

regards,
Stan

 .../devicetree/bindings/spi/qcom,spi-qup.txt       |    8 +
 drivers/spi/spi-qup.c                              |  336 ++++++++++++++++++--
 2 files changed, 312 insertions(+), 32 deletions(-)

Comments

Ivan T. Ivanov March 6, 2015, 2:38 p.m. UTC | #1
On Wed, 2015-03-04 at 12:02 +0200, Stanimir Varbanov wrote:
> From: Andy Gross <agross@codeaurora.org>
> 
> This patch adds DMA capabilities to the spi-qup driver.  If DMA channels are
> present, the QUP will use DMA instead of block mode for transfers to/from SPI
> peripherals for transactions larger than the length of a block.
> 
> Signed-off-by: Andy Gross <agross@codeaurora.org>
> Signed-off-by: Stanimir Varbanov varbanov@linaro.org>

Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com>

Tested on top of Archit's DMA patch[1].

Thanks,
Ivan

[1] https://lkml.org/lkml/2015/1/22/52

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Mark Brown March 7, 2015, 11:21 a.m. UTC | #2
On Wed, Mar 04, 2015 at 12:02:05PM +0200, Stanimir Varbanov wrote:
> From: Andy Gross <agross@codeaurora.org>
> 
> This patch adds DMA capabilities to the spi-qup driver.  If DMA channels are
> present, the QUP will use DMA instead of block mode for transfers to/from SPI
> peripherals for transactions larger than the length of a block.

Applied, but why is there no devm_dma_request_slave_channel_reason()?
Andy Shevchenko March 7, 2015, 7:43 p.m. UTC | #3
On Sat, Mar 7, 2015 at 1:21 PM, Mark Brown <broonie@kernel.org> wrote:
> On Wed, Mar 04, 2015 at 12:02:05PM +0200, Stanimir Varbanov wrote:
>> From: Andy Gross <agross@codeaurora.org>
>>
>> This patch adds DMA capabilities to the spi-qup driver.  If DMA channels are
>> present, the QUP will use DMA instead of block mode for transfers to/from SPI
>> peripherals for transactions larger than the length of a block.
>
> Applied, but why is there no devm_dma_request_slave_channel_reason()?

I suppose the answer would be "we have a lot of slightly different
cases and we have to get rid of current mess with legacy API calls".
The most problematic stuff now inside DMA slave subsystem is so called
"filter function". It's a main impediment right now as I understand.
Lars-Peter Clausen March 8, 2015, 11:21 a.m. UTC | #4
On 03/07/2015 08:43 PM, Andy Shevchenko wrote:
> On Sat, Mar 7, 2015 at 1:21 PM, Mark Brown <broonie@kernel.org> wrote:
>> On Wed, Mar 04, 2015 at 12:02:05PM +0200, Stanimir Varbanov wrote:
>>> From: Andy Gross <agross@codeaurora.org>
>>>
>>> This patch adds DMA capabilities to the spi-qup driver.  If DMA channels are
>>> present, the QUP will use DMA instead of block mode for transfers to/from SPI
>>> peripherals for transactions larger than the length of a block.
>>
>> Applied, but why is there no devm_dma_request_slave_channel_reason()?
>
> I suppose the answer would be "we have a lot of slightly different
> cases and we have to get rid of current mess with legacy API calls".
> The most problematic stuff now inside DMA slave subsystem is so called
> "filter function". It's a main impediment right now as I understand.

dma_request_slave_channel_reason() is the sane API though and does not use 
the filter functions. Adding a devm version of it seems reasonable.

- Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andy Shevchenko March 8, 2015, 12:20 p.m. UTC | #5
On Sun, Mar 8, 2015 at 1:21 PM, Lars-Peter Clausen <lars@metafoo.de> wrote:
> On 03/07/2015 08:43 PM, Andy Shevchenko wrote:
>>
>> On Sat, Mar 7, 2015 at 1:21 PM, Mark Brown <broonie@kernel.org> wrote:

>>> Applied, but why is there no devm_dma_request_slave_channel_reason()?
>>
>> I suppose the answer would be "we have a lot of slightly different
>> cases and we have to get rid of current mess with legacy API calls".
>> The most problematic stuff now inside DMA slave subsystem is so called
>> "filter function". It's a main impediment right now as I understand.
>
> dma_request_slave_channel_reason() is the sane API though and does not use
> the filter functions. Adding a devm version of it seems reasonable.

It would be dma_request_slave_channel() in the first place, but legacy
stuff didn't allow to do that, so here we are. I wouldn't like the
idea of creating devm_dma_* before we will have stable function names
without legacy involving.
Lars-Peter Clausen March 9, 2015, 9:12 a.m. UTC | #6
On 03/08/2015 01:20 PM, Andy Shevchenko wrote:
> On Sun, Mar 8, 2015 at 1:21 PM, Lars-Peter Clausen <lars@metafoo.de> wrote:
>> On 03/07/2015 08:43 PM, Andy Shevchenko wrote:
>>>
>>> On Sat, Mar 7, 2015 at 1:21 PM, Mark Brown <broonie@kernel.org> wrote:
>
>>>> Applied, but why is there no devm_dma_request_slave_channel_reason()?
>>>
>>> I suppose the answer would be "we have a lot of slightly different
>>> cases and we have to get rid of current mess with legacy API calls".
>>> The most problematic stuff now inside DMA slave subsystem is so called
>>> "filter function". It's a main impediment right now as I understand.
>>
>> dma_request_slave_channel_reason() is the sane API though and does not use
>> the filter functions. Adding a devm version of it seems reasonable.
>
> It would be dma_request_slave_channel() in the first place, but legacy
> stuff didn't allow to do that, so here we are. I wouldn't like the
> idea of creating devm_dma_* before we will have stable function names
> without legacy involving.
>

At some point when all callers dma_request_slave_channel() have been updated 
to use dma_request_slave_channel_reason(), the later might be renamed to the 
former. I don't see the problem with having to do the same for a 
devm_dma_request_slave_channel_reason().

- Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
index e2c88df..5c09077 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -33,6 +33,11 @@  Optional properties:
 		nodes.  If unspecified, a single SPI device without a chip
 		select can be used.
 
+- dmas:         Two DMA channel specifiers following the convention outlined
+                in bindings/dma/dma.txt
+- dma-names:    Names for the dma channels, if present. There must be at
+                least one channel named "tx" for transmit and named "rx" for
+                receive.
 
 SPI slave nodes must be children of the SPI master node and can contain
 properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -51,6 +56,9 @@  Example:
 		clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 		clock-names = "core", "iface";
 
+		dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
+		dma-names = "rx", "tx";
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi8_default>;
 
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index ff9cdbd..4b5fc4d 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -22,6 +22,8 @@ 
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/spi/spi.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 
 #define QUP_CONFIG			0x0000
 #define QUP_STATE			0x0004
@@ -116,6 +118,8 @@ 
 
 #define SPI_NUM_CHIPSELECTS		4
 
+#define SPI_MAX_DMA_XFER		(SZ_64K - 64)
+
 /* high speed mode is when bus rate is greater then 26MHz */
 #define SPI_HS_MIN_RATE			26000000
 #define SPI_MAX_RATE			50000000
@@ -140,9 +144,14 @@  struct spi_qup {
 	struct completion	done;
 	int			error;
 	int			w_size;	/* bytes per SPI word */
+	int			n_words;
 	int			tx_bytes;
 	int			rx_bytes;
 	int			qup_v1;
+
+	int			use_dma;
+	struct dma_slave_config	rx_conf;
+	struct dma_slave_config	tx_conf;
 };
 
 
@@ -198,7 +207,6 @@  static int spi_qup_set_state(struct spi_qup *controller, u32 state)
 	return 0;
 }
 
-
 static void spi_qup_fifo_read(struct spi_qup *controller,
 			    struct spi_transfer *xfer)
 {
@@ -266,6 +274,107 @@  static void spi_qup_fifo_write(struct spi_qup *controller,
 	}
 }
 
+static void spi_qup_dma_done(void *data)
+{
+	struct spi_qup *qup = data;
+
+	complete(&qup->done);
+}
+
+static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
+			   enum dma_transfer_direction dir,
+			   dma_async_tx_callback callback)
+{
+	struct spi_qup *qup = spi_master_get_devdata(master);
+	unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sgl;
+	struct dma_chan *chan;
+	dma_cookie_t cookie;
+	unsigned int nents;
+
+	if (dir == DMA_MEM_TO_DEV) {
+		chan = master->dma_tx;
+		nents = xfer->tx_sg.nents;
+		sgl = xfer->tx_sg.sgl;
+	} else {
+		chan = master->dma_rx;
+		nents = xfer->rx_sg.nents;
+		sgl = xfer->rx_sg.sgl;
+	}
+
+	desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
+	if (!desc)
+		return -EINVAL;
+
+	desc->callback = callback;
+	desc->callback_param = qup;
+
+	cookie = dmaengine_submit(desc);
+
+	return dma_submit_error(cookie);
+}
+
+static void spi_qup_dma_terminate(struct spi_master *master,
+				  struct spi_transfer *xfer)
+{
+	if (xfer->tx_buf)
+		dmaengine_terminate_all(master->dma_tx);
+	if (xfer->rx_buf)
+		dmaengine_terminate_all(master->dma_rx);
+}
+
+static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer)
+{
+	dma_async_tx_callback rx_done = NULL, tx_done = NULL;
+	int ret;
+
+	if (xfer->rx_buf)
+		rx_done = spi_qup_dma_done;
+	else if (xfer->tx_buf)
+		tx_done = spi_qup_dma_done;
+
+	if (xfer->rx_buf) {
+		ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done);
+		if (ret)
+			return ret;
+
+		dma_async_issue_pending(master->dma_rx);
+	}
+
+	if (xfer->tx_buf) {
+		ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV, tx_done);
+		if (ret)
+			return ret;
+
+		dma_async_issue_pending(master->dma_tx);
+	}
+
+	return 0;
+}
+
+static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer)
+{
+	struct spi_qup *qup = spi_master_get_devdata(master);
+	int ret;
+
+	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+	if (ret) {
+		dev_warn(qup->dev, "cannot set RUN state\n");
+		return ret;
+	}
+
+	ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
+	if (ret) {
+		dev_warn(qup->dev, "cannot set PAUSE state\n");
+		return ret;
+	}
+
+	spi_qup_fifo_write(qup, xfer);
+
+	return 0;
+}
+
 static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 {
 	struct spi_qup *controller = dev_id;
@@ -315,11 +424,13 @@  static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 		error = -EIO;
 	}
 
-	if (opflags & QUP_OP_IN_SERVICE_FLAG)
-		spi_qup_fifo_read(controller, xfer);
+	if (!controller->use_dma) {
+		if (opflags & QUP_OP_IN_SERVICE_FLAG)
+			spi_qup_fifo_read(controller, xfer);
 
-	if (opflags & QUP_OP_OUT_SERVICE_FLAG)
-		spi_qup_fifo_write(controller, xfer);
+		if (opflags & QUP_OP_OUT_SERVICE_FLAG)
+			spi_qup_fifo_write(controller, xfer);
+	}
 
 	spin_lock_irqsave(&controller->lock, flags);
 	controller->error = error;
@@ -332,13 +443,35 @@  static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static u32
+spi_qup_get_mode(struct spi_master *master, struct spi_transfer *xfer)
+{
+	struct spi_qup *qup = spi_master_get_devdata(master);
+	u32 mode;
+
+	qup->w_size = 4;
+
+	if (xfer->bits_per_word <= 8)
+		qup->w_size = 1;
+	else if (xfer->bits_per_word <= 16)
+		qup->w_size = 2;
+
+	qup->n_words = xfer->len / qup->w_size;
+
+	if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
+		mode = QUP_IO_M_MODE_FIFO;
+	else
+		mode = QUP_IO_M_MODE_BLOCK;
+
+	return mode;
+}
 
 /* set clock freq ... bits per word */
 static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 {
 	struct spi_qup *controller = spi_master_get_devdata(spi->master);
 	u32 config, iomode, mode, control;
-	int ret, n_words, w_size;
+	int ret, n_words;
 
 	if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
 		dev_err(controller->dev, "too big size for loopback %d > %d\n",
@@ -358,35 +491,54 @@  static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 		return -EIO;
 	}
 
-	w_size = 4;
-	if (xfer->bits_per_word <= 8)
-		w_size = 1;
-	else if (xfer->bits_per_word <= 16)
-		w_size = 2;
-
-	n_words = xfer->len / w_size;
-	controller->w_size = w_size;
+	mode = spi_qup_get_mode(spi->master, xfer);
+	n_words = controller->n_words;
 
-	if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
-		mode = QUP_IO_M_MODE_FIFO;
+	if (mode == QUP_IO_M_MODE_FIFO) {
 		writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
 		writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
 		/* must be zero for FIFO */
 		writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
 		writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
-	} else {
-		mode = QUP_IO_M_MODE_BLOCK;
+	} else if (!controller->use_dma) {
 		writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
 		writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
 		/* must be zero for BLOCK and BAM */
 		writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
 		writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
+	} else {
+		mode = QUP_IO_M_MODE_BAM;
+		writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
+		writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
+
+		if (!controller->qup_v1) {
+			void __iomem *input_cnt;
+
+			input_cnt = controller->base + QUP_MX_INPUT_CNT;
+			/*
+			 * for DMA transfers, both QUP_MX_INPUT_CNT and
+			 * QUP_MX_OUTPUT_CNT must be zero to all cases but one.
+			 * That case is a non-balanced transfer when there is
+			 * only a rx_buf.
+			 */
+			if (xfer->tx_buf)
+				writel_relaxed(0, input_cnt);
+			else
+				writel_relaxed(n_words, input_cnt);
+
+			writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
+		}
 	}
 
 	iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
 	/* Set input and output transfer mode */
 	iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
-	iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
+
+	if (!controller->use_dma)
+		iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
+	else
+		iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
+
 	iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
 	iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
 
@@ -428,11 +580,31 @@  static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 	config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
 	config |= xfer->bits_per_word - 1;
 	config |= QUP_CONFIG_SPI_MODE;
+
+	if (controller->use_dma) {
+		if (!xfer->tx_buf)
+			config |= QUP_CONFIG_NO_OUTPUT;
+		if (!xfer->rx_buf)
+			config |= QUP_CONFIG_NO_INPUT;
+	}
+
 	writel_relaxed(config, controller->base + QUP_CONFIG);
 
 	/* only write to OPERATIONAL_MASK when register is present */
-	if (!controller->qup_v1)
-		writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
+	if (!controller->qup_v1) {
+		u32 mask = 0;
+
+		/*
+		 * mask INPUT and OUTPUT service flags to prevent IRQs on FIFO
+		 * status change in BAM mode
+		 */
+
+		if (mode == QUP_IO_M_MODE_BAM)
+			mask = QUP_OP_IN_SERVICE_FLAG | QUP_OP_OUT_SERVICE_FLAG;
+
+		writel_relaxed(mask, controller->base + QUP_OPERATIONAL_MASK);
+	}
+
 	return 0;
 }
 
@@ -461,17 +633,13 @@  static int spi_qup_transfer_one(struct spi_master *master,
 	controller->tx_bytes = 0;
 	spin_unlock_irqrestore(&controller->lock, flags);
 
-	if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
-		dev_warn(controller->dev, "cannot set RUN state\n");
-		goto exit;
-	}
+	if (controller->use_dma)
+		ret = spi_qup_do_dma(master, xfer);
+	else
+		ret = spi_qup_do_pio(master, xfer);
 
-	if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
-		dev_warn(controller->dev, "cannot set PAUSE state\n");
+	if (ret)
 		goto exit;
-	}
-
-	spi_qup_fifo_write(controller, xfer);
 
 	if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
 		dev_warn(controller->dev, "cannot set EXECUTE state\n");
@@ -480,6 +648,7 @@  static int spi_qup_transfer_one(struct spi_master *master,
 
 	if (!wait_for_completion_timeout(&controller->done, timeout))
 		ret = -ETIMEDOUT;
+
 exit:
 	spi_qup_set_state(controller, QUP_STATE_RESET);
 	spin_lock_irqsave(&controller->lock, flags);
@@ -487,6 +656,97 @@  exit:
 	if (!ret)
 		ret = controller->error;
 	spin_unlock_irqrestore(&controller->lock, flags);
+
+	if (ret && controller->use_dma)
+		spi_qup_dma_terminate(master, xfer);
+
+	return ret;
+}
+
+static bool spi_qup_can_dma(struct spi_master *master, struct spi_device *spi,
+			    struct spi_transfer *xfer)
+{
+	struct spi_qup *qup = spi_master_get_devdata(master);
+	size_t dma_align = dma_get_cache_alignment();
+	u32 mode;
+
+	qup->use_dma = 0;
+
+	if (xfer->rx_buf && (xfer->len % qup->in_blk_sz ||
+	    IS_ERR_OR_NULL(master->dma_rx) ||
+	    !IS_ALIGNED((size_t)xfer->rx_buf, dma_align)))
+		return false;
+
+	if (xfer->tx_buf && (xfer->len % qup->out_blk_sz ||
+	    IS_ERR_OR_NULL(master->dma_tx) ||
+	    !IS_ALIGNED((size_t)xfer->tx_buf, dma_align)))
+		return false;
+
+	mode = spi_qup_get_mode(master, xfer);
+	if (mode == QUP_IO_M_MODE_FIFO)
+		return false;
+
+	qup->use_dma = 1;
+
+	return true;
+}
+
+static void spi_qup_release_dma(struct spi_master *master)
+{
+	if (!IS_ERR_OR_NULL(master->dma_rx))
+		dma_release_channel(master->dma_rx);
+	if (!IS_ERR_OR_NULL(master->dma_tx))
+		dma_release_channel(master->dma_tx);
+}
+
+static int spi_qup_init_dma(struct spi_master *master, resource_size_t base)
+{
+	struct spi_qup *spi = spi_master_get_devdata(master);
+	struct dma_slave_config *rx_conf = &spi->rx_conf,
+				*tx_conf = &spi->tx_conf;
+	struct device *dev = spi->dev;
+	int ret;
+
+	/* allocate dma resources, if available */
+	master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+	if (IS_ERR(master->dma_rx))
+		return PTR_ERR(master->dma_rx);
+
+	master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+	if (IS_ERR(master->dma_tx)) {
+		ret = PTR_ERR(master->dma_tx);
+		goto err_tx;
+	}
+
+	/* set DMA parameters */
+	rx_conf->direction = DMA_DEV_TO_MEM;
+	rx_conf->device_fc = 1;
+	rx_conf->src_addr = base + QUP_INPUT_FIFO;
+	rx_conf->src_maxburst = spi->in_blk_sz;
+
+	tx_conf->direction = DMA_MEM_TO_DEV;
+	tx_conf->device_fc = 1;
+	tx_conf->dst_addr = base + QUP_OUTPUT_FIFO;
+	tx_conf->dst_maxburst = spi->out_blk_sz;
+
+	ret = dmaengine_slave_config(master->dma_rx, rx_conf);
+	if (ret) {
+		dev_err(dev, "failed to configure RX channel\n");
+		goto err;
+	}
+
+	ret = dmaengine_slave_config(master->dma_tx, tx_conf);
+	if (ret) {
+		dev_err(dev, "failed to configure TX channel\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	dma_release_channel(master->dma_tx);
+err_tx:
+	dma_release_channel(master->dma_rx);
 	return ret;
 }
 
@@ -562,6 +822,8 @@  static int spi_qup_probe(struct platform_device *pdev)
 	master->transfer_one = spi_qup_transfer_one;
 	master->dev.of_node = pdev->dev.of_node;
 	master->auto_runtime_pm = true;
+	master->dma_alignment = dma_get_cache_alignment();
+	master->max_dma_len = SPI_MAX_DMA_XFER;
 
 	platform_set_drvdata(pdev, master);
 
@@ -573,6 +835,12 @@  static int spi_qup_probe(struct platform_device *pdev)
 	controller->cclk = cclk;
 	controller->irq = irq;
 
+	ret = spi_qup_init_dma(master, res->start);
+	if (ret == -EPROBE_DEFER)
+		goto error;
+	else if (!ret)
+		master->can_dma = spi_qup_can_dma;
+
 	/* set v1 flag if device is version 1 */
 	if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
 		controller->qup_v1 = 1;
@@ -609,7 +877,7 @@  static int spi_qup_probe(struct platform_device *pdev)
 	ret = spi_qup_set_state(controller, QUP_STATE_RESET);
 	if (ret) {
 		dev_err(dev, "cannot set RESET state\n");
-		goto error;
+		goto error_dma;
 	}
 
 	writel_relaxed(0, base + QUP_OPERATIONAL);
@@ -633,7 +901,7 @@  static int spi_qup_probe(struct platform_device *pdev)
 	ret = devm_request_irq(dev, irq, spi_qup_qup_irq,
 			       IRQF_TRIGGER_HIGH, pdev->name, controller);
 	if (ret)
-		goto error;
+		goto error_dma;
 
 	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
 	pm_runtime_use_autosuspend(dev);
@@ -648,6 +916,8 @@  static int spi_qup_probe(struct platform_device *pdev)
 
 disable_pm:
 	pm_runtime_disable(&pdev->dev);
+error_dma:
+	spi_qup_release_dma(master);
 error:
 	clk_disable_unprepare(cclk);
 	clk_disable_unprepare(iclk);
@@ -739,6 +1009,8 @@  static int spi_qup_remove(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	spi_qup_release_dma(master);
+
 	clk_disable_unprepare(controller->cclk);
 	clk_disable_unprepare(controller->iclk);