| Message ID | 550C47ED.3010301@collabora.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Javier, On Fri, Mar 20, 2015 at 9:46 PM, Javier Martinez Canillas <javier.martinez@collabora.co.uk> wrote: > Hello Abhilash, > > On 03/20/2015 03:23 PM, Abhilash Kesavan wrote: >>> On 03/17/2015 06:35 PM, Kevin Hilman wrote: >>>> >>>> Anyone else having better luck with suspend/resume on peach-pi? >>>> >>> >>> # echo +2 > /sys/class/rtc/rtc0/wakealarm && echo mem > /sys/power/state >>> >>> Suspend and CPUs shutdown seems to succeed according to [0] but the system >>> never wakes up... >>> >>> I also tried to wakeup the system with the keyboard and the trackpad that is >>> a wake up source but it does not work either. >>> >>> I remember that when the 5420 s2r support series were posted, aclk200_disp1 >>> and aclk300_disp1 clocks needed to be marked as CLK_IGNORE_UNUSED but afaiu >>> that was only because display support was not yet merged but it is now. >>> >>> I tried anyways both marking those clocks as CLK_IGNORE_UNUSED and passing >>> the clk_ignore_unused to the kernel command line but did not work either. >>> >>> Abhilash, Vikas, Pankaj, >>> >>> Any ideas of what could be causing this regression? It seems that by the >>> time the Exynos5420 S2R support landed in mainline, it was already not >>> working which makes it hard to bisect what caused the issue. >> >> I remember the Pi power LED changing color from blue on suspend. Does > > Thanks a lot for answering. Who manages that LED? is the kernel or the > firwmare in the EC? I tried suspend to ram using ChromeOS 3.8 kernel and > I see that the blue LED is indeed turned off on suspend but that does not > happen in mainline. I am not too sure. It was just something I remembered from earlier. > >> that happen ? I'll try reproducing the issue and then probably use an >> old working s2r branch in one of my local repos to track this down. >> > > If I checkout mainline with HEAD in your commit adc548d77c22 > ("ARM: EXYNOS: Use MCPM call-backs to support S2R on exynos5420") + the > patch you mentioned back then to keep the aclk200_disp1 and aclk300_disp1 > clocks enabled even when not used [0], I have S2R working. But even with > that commit, I don't see the blue LED to be turn off like is the case in > the ChromeOS 3.8 kernel. > > So I think you can use that as a base. I tried bisecting but it is tricky > due other issues masking the S2R regression. I also tried to compare the > diff between adc548d77c22 and v3.19-rc1 that is the first known bad afaict > but didn't find any relevant either. > > By adding printouts I can tell that all the CPUs enter exynos_power_down() > in arch/arm/mach-exynos/mcpm-exynos.c and also the last man disables the > cluster for both Cortex A-15 and A-7 clusters. > > So it seems that the problem is on the resume path. I have made some progress on this. This is the current state: If I use next-20141114 (which was when the S2R code first appeared in linux-next), then all is good. next-20141117 is fine too but things are broken in next-20141118. I have narrowed it down to the commit: "ae43b32 ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12". The only way I see this impacting s2r is because it disables the dma pclk while suspending or before. Checking further, will update in a bit. Regards, Abhilash > >> Regards, >> Abhilash >>> > > Best regards, > Javier > > [0]: > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > index 848d602efc06..d8b66339d564 100644 > --- a/drivers/clk/samsung/clk-exynos5420.c > +++ b/drivers/clk/samsung/clk-exynos5420.c > @@ -932,14 +932,14 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { > GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl", > GATE_BUS_TOP, 17, 0, 0), > GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1", > - GATE_BUS_TOP, 18, 0, 0), > + GATE_BUS_TOP, 18, CLK_IGNORE_UNUSED, 0), > GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24", > GATE_BUS_TOP, 28, 0, 0), > GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m", > GATE_BUS_TOP, 29, 0, 0), > > GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1", > - SRC_MASK_TOP2, 24, 0, 0), > + SRC_MASK_TOP2, 24, CLK_IGNORE_UNUSED, 0), > > GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk", > SRC_MASK_TOP7, 20, 0, 0), > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Fri, Mar 20, 2015 at 9:59 PM, Abhilash Kesavan <kesavan.abhilash@gmail.com> wrote: > Hi Javier, > > On Fri, Mar 20, 2015 at 9:46 PM, Javier Martinez Canillas > <javier.martinez@collabora.co.uk> wrote: >> Hello Abhilash, >> >> On 03/20/2015 03:23 PM, Abhilash Kesavan wrote: >>>> On 03/17/2015 06:35 PM, Kevin Hilman wrote: >>>>> >>>>> Anyone else having better luck with suspend/resume on peach-pi? >>>>> >>>> >>>> # echo +2 > /sys/class/rtc/rtc0/wakealarm && echo mem > /sys/power/state >>>> >>>> Suspend and CPUs shutdown seems to succeed according to [0] but the system >>>> never wakes up... >>>> >>>> I also tried to wakeup the system with the keyboard and the trackpad that is >>>> a wake up source but it does not work either. >>>> >>>> I remember that when the 5420 s2r support series were posted, aclk200_disp1 >>>> and aclk300_disp1 clocks needed to be marked as CLK_IGNORE_UNUSED but afaiu >>>> that was only because display support was not yet merged but it is now. >>>> >>>> I tried anyways both marking those clocks as CLK_IGNORE_UNUSED and passing >>>> the clk_ignore_unused to the kernel command line but did not work either. >>>> >>>> Abhilash, Vikas, Pankaj, >>>> >>>> Any ideas of what could be causing this regression? It seems that by the >>>> time the Exynos5420 S2R support landed in mainline, it was already not >>>> working which makes it hard to bisect what caused the issue. >>> >>> I remember the Pi power LED changing color from blue on suspend. Does >> >> Thanks a lot for answering. Who manages that LED? is the kernel or the >> firwmare in the EC? I tried suspend to ram using ChromeOS 3.8 kernel and >> I see that the blue LED is indeed turned off on suspend but that does not >> happen in mainline. > > I am not too sure. It was just something I remembered from earlier. > >> >>> that happen ? I'll try reproducing the issue and then probably use an >>> old working s2r branch in one of my local repos to track this down. >>> >> >> If I checkout mainline with HEAD in your commit adc548d77c22 >> ("ARM: EXYNOS: Use MCPM call-backs to support S2R on exynos5420") + the >> patch you mentioned back then to keep the aclk200_disp1 and aclk300_disp1 >> clocks enabled even when not used [0], I have S2R working. But even with >> that commit, I don't see the blue LED to be turn off like is the case in >> the ChromeOS 3.8 kernel. >> >> So I think you can use that as a base. I tried bisecting but it is tricky >> due other issues masking the S2R regression. I also tried to compare the >> diff between adc548d77c22 and v3.19-rc1 that is the first known bad afaict >> but didn't find any relevant either. >> >> By adding printouts I can tell that all the CPUs enter exynos_power_down() >> in arch/arm/mach-exynos/mcpm-exynos.c and also the last man disables the >> cluster for both Cortex A-15 and A-7 clusters. >> >> So it seems that the problem is on the resume path. > > I have made some progress on this. This is the current state: > > If I use next-20141114 (which was when the S2R code first appeared in > linux-next), then all is good. next-20141117 is fine too but things > are broken in next-20141118. > I have narrowed it down to the commit: "ae43b32 ARM: 8202/1: > dmaengine: pl330: Add runtime Power Management support v12". The only > way I see this impacting s2r is because it disables the dma pclk while > suspending or before. > > Checking further, will update in a bit. OK, so disabling the mdma0 node in "arch/arm/boot/dts/exynos5420.dtsi" gets things working. Like Kevin mentioned in the initial report, I need to disable DRM else there is a crash while suspending. With these two changes, on linus' tree and kgene's for-next s2r works fine. On linux-next, I need to disable CONFIG_MWIFIEX too. Also, I observe cros-ec-spi transfer failures during resume and sometimes it is unable to re-enable the tps fets causing a crash. However, that would be a driver specific issue. Regarding the mdma0 disablement, it looks like for the system to suspend properly the mdma0 pclk needs to stay on. Regards, Abhilash >> >>> Regards, >>> Abhilash >>>> >> >> Best regards, >> Javier >> >> [0]: >> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c >> index 848d602efc06..d8b66339d564 100644 >> --- a/drivers/clk/samsung/clk-exynos5420.c >> +++ b/drivers/clk/samsung/clk-exynos5420.c >> @@ -932,14 +932,14 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { >> GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl", >> GATE_BUS_TOP, 17, 0, 0), >> GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1", >> - GATE_BUS_TOP, 18, 0, 0), >> + GATE_BUS_TOP, 18, CLK_IGNORE_UNUSED, 0), >> GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24", >> GATE_BUS_TOP, 28, 0, 0), >> GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m", >> GATE_BUS_TOP, 29, 0, 0), >> >> GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1", >> - SRC_MASK_TOP2, 24, 0, 0), >> + SRC_MASK_TOP2, 24, CLK_IGNORE_UNUSED, 0), >> >> GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk", >> SRC_MASK_TOP7, 20, 0, 0), >> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Abhilash, On 03/20/2015 06:40 PM, Abhilash Kesavan wrote: >> >> I have made some progress on this. This is the current state: >> >> If I use next-20141114 (which was when the S2R code first appeared in >> linux-next), then all is good. next-20141117 is fine too but things >> are broken in next-20141118. >> I have narrowed it down to the commit: "ae43b32 ARM: 8202/1: >> dmaengine: pl330: Add runtime Power Management support v12". The only >> way I see this impacting s2r is because it disables the dma pclk while >> suspending or before. >> >> Checking further, will update in a bit. > > OK, so disabling the mdma0 node in "arch/arm/boot/dts/exynos5420.dtsi" > gets things working. Like Kevin mentioned in the initial report, I > need to disable DRM else there is a crash while suspending. With these > two changes, on linus' tree and kgene's for-next s2r works fine. > Awesome, thanks a lot for digging this out! > On linux-next, I need to disable CONFIG_MWIFIEX too. > Yes, I also saw that issue with mwfiex when suspend-to-idle (which works in -next) due the MMC_PM_KEEP_POWER flag being set in the host pm caps. But I don't see that being set in the host driver. > Also, I observe cros-ec-spi transfer failures during resume and > sometimes it is unable to re-enable the tps fets causing a crash. > However, that would be a driver specific issue. > Indeed, I can take a look to that issue as well. > Regarding the mdma0 disablement, it looks like for the system to > suspend properly the mdma0 pclk needs to stay on. > It seems so, I remember we had other issues with the mentioned commit due clocks being gated. For example the mau_epll clock that was needed to access the audss block registers and caused a boot hang on Exyos5420. That specific issue was fixed by f1e9203e2366 ("clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated") which solves it by enabling the mau_epll on probe. > Regards, > Abhilash >>> Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Abhilash, On 03/20/2015 06:40 PM, Abhilash Kesavan wrote: > > Regarding the mdma0 disablement, it looks like for the system to > suspend properly the mdma0 pclk needs to stay on. > I had time today again to work on this issue and the best place I found to enable and disable the mdma0 clock is in exynos5420_pm_{prepare,resume}. Please let me know if you have a better idea of where the clock should be managed. I'll send a RFC patch-set soon. > Regards, > Abhilash Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Javier, On Fri, Mar 27, 2015 at 6:59 PM, Javier Martinez Canillas <javier.martinez@collabora.co.uk> wrote: > Hello Abhilash, > > On 03/20/2015 06:40 PM, Abhilash Kesavan wrote: >> >> Regarding the mdma0 disablement, it looks like for the system to >> suspend properly the mdma0 pclk needs to stay on. >> > > I had time today again to work on this issue and the best > place I found to enable and disable the mdma0 clock is in > exynos5420_pm_{prepare,resume}. Please let me know if you > have a better idea of where the clock should be managed. > Modifying exynos5420_clk_suspend in drivers/clk/samsung/clk-exynos5420.c would be another way to go, however I have not tested if this actually works. > I'll send a RFC patch-set soon. Thanks for the effort. Regards, Abhilash -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Abhilash, On 03/27/2015 03:06 PM, Abhilash Kesavan wrote: > Hello Javier, > > On Fri, Mar 27, 2015 at 6:59 PM, Javier Martinez Canillas > <javier.martinez@collabora.co.uk> wrote: >> Hello Abhilash, >> >> On 03/20/2015 06:40 PM, Abhilash Kesavan wrote: >>> >>> Regarding the mdma0 disablement, it looks like for the system to >>> suspend properly the mdma0 pclk needs to stay on. >>> >> >> I had time today again to work on this issue and the best >> place I found to enable and disable the mdma0 clock is in >> exynos5420_pm_{prepare,resume}. Please let me know if you >> have a better idea of where the clock should be managed. >> > > Modifying exynos5420_clk_suspend in > drivers/clk/samsung/clk-exynos5420.c would be another way to go, > however I have not tested if this actually works. > Sorry, I just posted the series: "[RFC PATCH 0/2] ARM: EXYNOS: Fix Suspend-to-RAM on Exynos5420" before reading your email... Please let me know if you think that is not the best appraoch and I can come up with another one to modify the clk-exynos5420 suspend and resume callbacks. Another option is to use Lee Jone's clocks "always on" support [0] that has been posted. >> I'll send a RFC patch-set soon. > > Thanks for the effort. > Thanks to you for all the help. > Regards, > Abhilash > Best regards, Javier [0]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/326616.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff between adc548d77c22 and v3.19-rc1 that is the first known bad afaict but didn't find any relevant either. By adding printouts I can tell that all the CPUs enter exynos_power_down() in arch/arm/mach-exynos/mcpm-exynos.c and also the last man disables the cluster for both Cortex A-15 and A-7 clusters. So it seems that the problem is on the resume path. > Regards, > Abhilash >> Best regards, Javier [0]: diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 848d602efc06..d8b66339d564 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -932,14 +932,14 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl", GATE_BUS_TOP, 17, 0, 0), GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1", - GATE_BUS_TOP, 18, 0, 0), + GATE_BUS_TOP, 18, CLK_IGNORE_UNUSED, 0), GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24", GATE_BUS_TOP, 28, 0, 0), GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m", GATE_BUS_TOP, 29, 0, 0), GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1", - SRC_MASK_TOP2, 24, 0, 0), + SRC_MASK_TOP2, 24, CLK_IGNORE_UNUSED, 0), GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk", SRC_MASK_TOP7, 20, 0, 0),