| Message ID | 20150404074337.GA31064@amd (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Pavel, On Sat, Apr 04, 2015 at 09:43:37AM +0200, Pavel Machek wrote: > > Documentation for adp1653 binding. s/binding/bindings/ > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > --- > > Please apply. > > Sorry, wrong version of patch was sent last time. > Pavel > > diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt > new file mode 100644 > index 0000000..4607ce3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt > @@ -0,0 +1,37 @@ > +* Analog Devices ADP1653 flash LED driver > + > +Required Properties: > + > + - compatible: Must contain be "adi,adp1653" s/be // > + > + - reg: I2C slave address > + > + - enable-gpios: Reference to the GPIO that controls the power for the chip. How about: enable-gpios: Specifier of the GPIO connected to EN pin I can make the changes if you're ok with that, otherwise please send v7. Then I'll apply that to my tree.
Hi! > enable-gpios: Specifier of the GPIO connected to EN pin > > I can make the changes if you're ok with that, otherwise please send v7. Then > I'll apply that to my tree. I'm ok with that. Thanks, Pavel
On Sat, Apr 04, 2015 at 07:11:16PM +0200, Pavel Machek wrote: > Hi! > > > enable-gpios: Specifier of the GPIO connected to EN pin > > > > I can make the changes if you're ok with that, otherwise please send v7. Then > > I'll apply that to my tree. > > I'm ok with that. Thanks. The patch is applied here: git://linuxtv.org/sailus/media_tree.git, branch adp1653
diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt new file mode 100644 index 0000000..4607ce3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt @@ -0,0 +1,37 @@ +* Analog Devices ADP1653 flash LED driver + +Required Properties: + + - compatible: Must contain be "adi,adp1653" + + - reg: I2C slave address + + - enable-gpios: Reference to the GPIO that controls the power for the chip. + +There are two LED outputs available - flash and indicator. One LED is +represented by one child node, nodes need to be named "flash" and "indicator". + +Required properties of the LED child node: +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Required properties of the flash LED child node: + +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt + +Example: + + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + indicator { + max-microamp = <17500>; + }; + };
Documentation for adp1653 binding. Signed-off-by: Pavel Machek <pavel@ucw.cz> --- Please apply. Sorry, wrong version of patch was sent last time. Pavel