diff mbox

[v3,01/11] ARM: dts: apq8064: add RPM regulators support

Message ID 1428698564-11938-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Srinivas Kandagatla April 10, 2015, 8:42 p.m. UTC 
This patch adds rpm node to apq8064 dt as rpm would be used by other
devices for regulator support.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Bjorn Andersson April 10, 2015, 9:04 p.m. UTC | #1 
On Fri 10 Apr 13:42 PDT 2015, Srinivas Kandagatla wrote:

> This patch adds rpm node to apq8064 dt as rpm would be used by other
> devices for regulator support.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

Regards,
Bjorn
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 6c15112..19629c9 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -276,6 +276,30 @@ 
 			#reset-cells = <1>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-apq8064";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+
+				pm8921_hdmi_switch: hdmi-switch {
+					bias-pull-down;
+				};
+			};
+		};
+
 		/* Temporary fixed regulator */
 		vsdcc_fixed: vsdcc-regulator {
 			compatible = "regulator-fixed";