@@ -1807,6 +1807,7 @@ enum skl_disp_power_wells {
#define GMBUS_CYCLE_INDEX (2<<25)
#define GMBUS_CYCLE_STOP (4<<25)
#define GMBUS_BYTE_COUNT_SHIFT 16
+#define GMBUS_BYTE_COUNT_MAX ((1U << 9) - 1)
#define GMBUS_SLAVE_INDEX_SHIFT 8
#define GMBUS_SLAVE_ADDR_SHIFT 1
#define GMBUS_SLAVE_READ (1<<0)
@@ -270,18 +270,17 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
}
static int
-gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
- u32 gmbus1_index)
+gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
+ unsigned short addr, u8 *buf, unsigned int len,
+ u32 gmbus1_index)
{
int reg_offset = dev_priv->gpio_mmio_base;
- u16 len = msg->len;
- u8 *buf = msg->buf;
I915_WRITE(GMBUS1 + reg_offset,
gmbus1_index |
GMBUS_CYCLE_WAIT |
(len << GMBUS_BYTE_COUNT_SHIFT) |
- (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
+ (addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
while (len) {
int ret;
@@ -303,11 +302,36 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
}
static int
-gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
+gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
+ u32 gmbus1_index)
{
- int reg_offset = dev_priv->gpio_mmio_base;
- u16 len = msg->len;
u8 *buf = msg->buf;
+ unsigned int rx_size = msg->len;
+ unsigned int len;
+ int ret;
+
+ do {
+ len = min(rx_size, GMBUS_BYTE_COUNT_MAX);
+
+ ret = gmbus_xfer_read_chunk(dev_priv, msg->addr,
+ buf, len, gmbus1_index);
+ if (ret)
+ return ret;
+
+ rx_size -= len;
+ buf += len;
+ } while (rx_size != 0);
+
+ return 0;
+}
+
+
+static int
+gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
+ unsigned short addr, u8 *buf, unsigned int len)
+{
+ int reg_offset = dev_priv->gpio_mmio_base;
+ unsigned int chunk_size = len;
u32 val, loop;
val = loop = 0;
@@ -319,8 +343,8 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
I915_WRITE(GMBUS3 + reg_offset, val);
I915_WRITE(GMBUS1 + reg_offset,
GMBUS_CYCLE_WAIT |
- (msg->len << GMBUS_BYTE_COUNT_SHIFT) |
- (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
+ (chunk_size << GMBUS_BYTE_COUNT_SHIFT) |
+ (addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
while (len) {
int ret;
@@ -337,6 +361,29 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
if (ret)
return ret;
}
+
+ return 0;
+}
+
+static int
+gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
+{
+ u8 *buf = msg->buf;
+ unsigned int tx_size = msg->len;
+ unsigned int len;
+ int ret;
+
+ do {
+ len = min(tx_size, GMBUS_BYTE_COUNT_MAX);
+
+ ret = gmbus_xfer_write_chunk(dev_priv, msg->addr, buf, len);
+ if (ret)
+ return ret;
+
+ buf += len;
+ tx_size -= len;
+ } while (tx_size != 0);
+
return 0;
}
The hardware is limited to 2^9 - 1 (511) bytes transfers, and current driver has no protections in case users attempt to do larger transfers. The code will just stomp over status register and mayhem ensues. Let's split larger transfers into digestable chunks. Doing this allows Atmel MXT driver on Pixel 1 function properly (it hasn't since commit 9d8dc3e529a19e427fd379118acd132520935c5d "Input: atmel_mxt_ts - implement T44 message handling" which tries to consume multiple touchscreen/touchpad reports in a single transaction). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- I think I've tracked the main reason for the Pixel Touchpad breakage on newer kernels. The newer driver tries to consume several reports form touchscreen, and tries to read ~600 bytes at startup. i915 does not check the message limits and messes up GMBUS register, causing "phantom" reads on another i2c channel where the touchpad is connected. With i915 splitting the data into smaller chunks for transfer my Pixel reliably detects both touchpad and touchscreen on 4.0. Might be worth considering for stable too... Thanks, Dmitry drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_i2c.c | 67 ++++++++++++++++++++++++++++++++++------ 2 files changed, 58 insertions(+), 10 deletions(-)