diff mbox

ARM: rockchip: disable dapswjdp during suspend

Message ID 1429077431-31326-1-git-send-email-zyw@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chris Zhong April 15, 2015, 5:57 a.m. UTC
Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is
not "jtag_trstn". the AP would think this pin is always high, so it can
not reset before resume. When system resume, but the dapswjdp is not in
a default state, it may Access some illegal address, it cause system
crash during resume.
Let's disable this jtag function by clear the dapdeviceen bit, it
prohibit the dapswjdp to access memory and registers. This bit would
be enable in MASKROM, so we need clear it in suspend everytime.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

 arch/arm/mach-rockchip/pm.c | 7 +++++++
 arch/arm/mach-rockchip/pm.h | 4 ++++
 2 files changed, 11 insertions(+)

Comments

Doug Anderson April 15, 2015, 10:38 p.m. UTC | #1
Chris,

On Tue, Apr 14, 2015 at 10:57 PM, Chris Zhong <zyw@rock-chips.com> wrote:
> Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is
> not "jtag_trstn". the AP would think this pin is always high, so it can
> not reset before resume. When system resume, but the dapswjdp is not in
> a default state, it may Access some illegal address, it cause system
> crash during resume.
> Let's disable this jtag function by clear the dapdeviceen bit, it
> prohibit the dapswjdp to access memory and registers. This bit would
> be enable in MASKROM, so we need clear it in suspend everytime.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
>  arch/arm/mach-rockchip/pm.c | 7 +++++++
>  arch/arm/mach-rockchip/pm.h | 4 ++++
>  2 files changed, 11 insertions(+)

I can't say that I understand 100% of the interactions here, but I
don't think anyone without full access to the MaskROM code would be
able to understand this fully.

...but this seems sane to me.  I guess disabling it here and then
enabling it in the MaskROM will effectively give it a good reset so
we're all good.

Reviewed-by: Doug Anderson <dianders@chromium.org>

I'll trust your testing on this, since you have actual machines that
reproduce the issue.

-Doug
Heiko Stübner April 25, 2015, 12:14 a.m. UTC | #2
Am Mittwoch, 15. April 2015, 13:57:11 schrieb Chris Zhong:
> Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is
> not "jtag_trstn". the AP would think this pin is always high, so it can
> not reset before resume. When system resume, but the dapswjdp is not in
> a default state, it may Access some illegal address, it cause system
> crash during resume.
> Let's disable this jtag function by clear the dapdeviceen bit, it
> prohibit the dapswjdp to access memory and registers. This bit would
> be enable in MASKROM, so we need clear it in suspend everytime.
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>

applied to a fixes branch for 4.1


Thanks
Heiko
diff mbox

Patch

diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index b07d886..b0dcbe2 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -83,6 +83,13 @@  static void rk3288_slp_mode_set(int level)
 		     SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
 		     | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
 
+	/*
+	 * The dapswjdp can not auto reset before resume, that cause it may
+	 * access some illegal address during resume. Let's disable it before
+	 * suspend, and the MASKROM will enable it back.
+	 */
+	regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
 	/* booting address of resuming system is from this register value */
 	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
 		     rk3288_bootram_phy);
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index 03ff31d..3e8d39c 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -55,6 +55,10 @@  static inline void rockchip_suspend_init(void)
 #define SGRF_FAST_BOOT_EN		BIT(8)
 #define SGRF_FAST_BOOT_EN_WRITE		BIT(24)
 
+#define RK3288_SGRF_CPU_CON0		(0x40)
+#define SGRF_DAPDEVICEEN		BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE		BIT(16)
+
 #define RK3288_CRU_MODE_CON		0x50
 #define RK3288_CRU_SEL0_CON		0x60
 #define RK3288_CRU_SEL1_CON		0x64