Message ID | 1427808215-19178-3-git-send-email-beomho.seo@samsung.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
DT Ack please. > From: Jaewon Kim <jaewon02.kim@samsung.com> > > Add document describing device tree bindings for max77843 MFD. > Drivers: MFD core, regulator, extcon, charger and fuelgauge. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > --- > Documentation/devicetree/bindings/mfd/max77843.txt | 100 ++++++++++++++++++++ > 1 file changed, 100 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/max77843.txt > > diff --git a/Documentation/devicetree/bindings/mfd/max77843.txt b/Documentation/devicetree/bindings/mfd/max77843.txt > new file mode 100644 > index 0000000..4111f84 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/max77843.txt > @@ -0,0 +1,100 @@ > +Maxim MAX77843 multi-function device > + > +MAX77843 is a Multi-Function Device with the following submodules: > +- PMIC : 2 SAFEOUT LDOs for USB device > +- CHARGER : Li+ battery charger with Fuel Gauge > +- MUIC : Micro USB Interface Controller > +- HAPTIC : Motor Controller for tactile feedback > + > +It is interfaced to host controller using I2C. > + > +Required properties: > +- compatible : Must be "maxim,max77843". > +- reg : I2C slave address of PMIC block. > +- interrupts : I2C line for main SoCs. > +- interrupt-parent : The parent of interrupt controller. > + > +Optional properties: > +- regulators : The regulators of max77843 have to be instantiated under subnode > + named "regulators" using the following format. > + > + [*]refer : Documentation/devicetree/bindings/regulator/regulator.txt > + > + regulators { > + SAFEOUT { > + regulator-name = "SAFEOUT"; > + }; > + } > + > + List of valid regulator names: > + - SAFEOUT1, SAFEOUT2, CHARGER. > + > +- max77843-muic : This properties used by extcon consumers. > + Required properties: > + - compatible : Must be "maxim,max77842-muic". > + > +- max77843-charger : There battery charger of MAX77843 have to be instantiated > + under sub-node named "max77843-charger" using the following format. > + Required properties: > + - compatible : Must be "maxim,max77842-charger". > + - maxim,fast-charge-uamp : Fast charge current levels are > + 100 mA to 3150 mA programmed by I2C per 100 mA. > + - maxim,top-off-uamp : Top off current threshold levels are > + 125 mA to 650 mA programmed by I2C per 75 mA. > + - maxim,input-uamp-limit : Input current limit levels are > + 100 mA to 3533 mA programmed by I2C per 33 mA. > + > +- max77843-haptic : The MAX77843 haptic device provides the tactile feedback > + to the user by using PWM(Pulse Width Modulation) signal. > + Required properties: > + - compatible : Must be "maxim,max77843-hpatic". > + - haptic-supply : Power supply for the haptic motor. > + [*] refer Documentation/devicetree/ > + bindings/regulator/regulator.txt > + - pwms : phandle for the PWM(Pulse Width Modulation) device. > + PWM properties should be named "pwms". > + [*] refer Documentation/devicetree/bindings/pwm/pwm.txt > + > +Example: > + max77843@66 { > + compatible = "samsung,max77843"; > + reg = <0x66>; > + interrupt-parent = <&gpa1>; > + interrupts = <5 2>; > + > + regulators { > + SAFEOUT1 { > + regulator-name = "SAFEOUT1"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <4950000>; > + }; > + SAFEOUT2 { > + regulator-name = "SAFEOUT2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <4950000>; > + }; > + CHARGER { > + regulator-name = "CHARGER"; > + regulator-min-microamp = <100000>; > + regulator-max-microamp = <3150000>; > + }; > + }; > + > + haptic { > + compatible = "maxim,max77843-haptic"; > + haptic-supply = <&haptic_supply>; > + pwms = <&pwm 0 40000 0>; > + pwm-names = "haptic"; > + }; > + > + max77843-muic { > + compatible = "maxim,max77843-muic"; > + }; > + > + max77843-charger { > + compatible = "maxim,max77843-charger"; > + maxim,fast-charge-uamp = <450000>; > + maxim,top-off-uamp = <125000>; > + maxim,input-uamp-limit = <500000>; > + }; > + };
diff --git a/Documentation/devicetree/bindings/mfd/max77843.txt b/Documentation/devicetree/bindings/mfd/max77843.txt new file mode 100644 index 0000000..4111f84 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77843.txt @@ -0,0 +1,100 @@ +Maxim MAX77843 multi-function device + +MAX77843 is a Multi-Function Device with the following submodules: +- PMIC : 2 SAFEOUT LDOs for USB device +- CHARGER : Li+ battery charger with Fuel Gauge +- MUIC : Micro USB Interface Controller +- HAPTIC : Motor Controller for tactile feedback + +It is interfaced to host controller using I2C. + +Required properties: +- compatible : Must be "maxim,max77843". +- reg : I2C slave address of PMIC block. +- interrupts : I2C line for main SoCs. +- interrupt-parent : The parent of interrupt controller. + +Optional properties: +- regulators : The regulators of max77843 have to be instantiated under subnode + named "regulators" using the following format. + + [*]refer : Documentation/devicetree/bindings/regulator/regulator.txt + + regulators { + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + } + + List of valid regulator names: + - SAFEOUT1, SAFEOUT2, CHARGER. + +- max77843-muic : This properties used by extcon consumers. + Required properties: + - compatible : Must be "maxim,max77842-muic". + +- max77843-charger : There battery charger of MAX77843 have to be instantiated + under sub-node named "max77843-charger" using the following format. + Required properties: + - compatible : Must be "maxim,max77842-charger". + - maxim,fast-charge-uamp : Fast charge current levels are + 100 mA to 3150 mA programmed by I2C per 100 mA. + - maxim,top-off-uamp : Top off current threshold levels are + 125 mA to 650 mA programmed by I2C per 75 mA. + - maxim,input-uamp-limit : Input current limit levels are + 100 mA to 3533 mA programmed by I2C per 33 mA. + +- max77843-haptic : The MAX77843 haptic device provides the tactile feedback + to the user by using PWM(Pulse Width Modulation) signal. + Required properties: + - compatible : Must be "maxim,max77843-hpatic". + - haptic-supply : Power supply for the haptic motor. + [*] refer Documentation/devicetree/ + bindings/regulator/regulator.txt + - pwms : phandle for the PWM(Pulse Width Modulation) device. + PWM properties should be named "pwms". + [*] refer Documentation/devicetree/bindings/pwm/pwm.txt + +Example: + max77843@66 { + compatible = "samsung,max77843"; + reg = <0x66>; + interrupt-parent = <&gpa1>; + interrupts = <5 2>; + + regulators { + SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + haptic { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&haptic_supply>; + pwms = <&pwm 0 40000 0>; + pwm-names = "haptic"; + }; + + max77843-muic { + compatible = "maxim,max77843-muic"; + }; + + max77843-charger { + compatible = "maxim,max77843-charger"; + maxim,fast-charge-uamp = <450000>; + maxim,top-off-uamp = <125000>; + maxim,input-uamp-limit = <500000>; + }; + };