diff mbox

[07/10] mfd/extcon: max77693: Rename defines to allow inclusion with max77843

Message ID 1430305114-23598-8-git-send-email-k.kozlowski.k@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Krzysztof Kozlowski April 29, 2015, 10:58 a.m. UTC
Add MAX77693 prefix to some of the defines used in max77693 extcon
driver so the max77693-private.h can be included simultaneously with
max77843-private.h.

Additionally use BIT() macro in header.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 drivers/extcon/extcon-max77693.c     |  76 +++++++++++++-------------
 include/linux/mfd/max77693-private.h | 102 +++++++++++++++++------------------
 2 files changed, 91 insertions(+), 87 deletions(-)

Comments

Lee Jones April 29, 2015, 1:12 p.m. UTC | #1
On Wed, 29 Apr 2015, Krzysztof Kozlowski wrote:

> Add MAX77693 prefix to some of the defines used in max77693 extcon
> driver so the max77693-private.h can be included simultaneously with
> max77843-private.h.
> 
> Additionally use BIT() macro in header.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
> ---
>  drivers/extcon/extcon-max77693.c     |  76 +++++++++++++-------------
>  include/linux/mfd/max77693-private.h | 102 +++++++++++++++++------------------
>  2 files changed, 91 insertions(+), 87 deletions(-)

[...]

> diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
> index 8c4143c0c651..7201c0b61bd5 100644
> --- a/include/linux/mfd/max77693-private.h
> +++ b/include/linux/mfd/max77693-private.h
> @@ -310,30 +310,30 @@ enum max77693_muic_reg {
>  #define INTMASK2_CHGTYP_MASK		(1 << INTMASK2_CHGTYP_SHIFT)
>  
>  /* MAX77693 MUIC - STATUS1~3 Register */
> -#define STATUS1_ADC_SHIFT		(0)
> -#define STATUS1_ADCLOW_SHIFT		(5)
> -#define STATUS1_ADCERR_SHIFT		(6)
> -#define STATUS1_ADC1K_SHIFT		(7)
> -#define STATUS1_ADC_MASK		(0x1f << STATUS1_ADC_SHIFT)
> -#define STATUS1_ADCLOW_MASK		(0x1 << STATUS1_ADCLOW_SHIFT)
> -#define STATUS1_ADCERR_MASK		(0x1 << STATUS1_ADCERR_SHIFT)
> -#define STATUS1_ADC1K_MASK		(0x1 << STATUS1_ADC1K_SHIFT)
> -
> -#define STATUS2_CHGTYP_SHIFT		(0)
> -#define STATUS2_CHGDETRUN_SHIFT		(3)
> -#define STATUS2_DCDTMR_SHIFT		(4)
> -#define STATUS2_DXOVP_SHIFT		(5)
> -#define STATUS2_VBVOLT_SHIFT		(6)
> -#define STATUS2_VIDRM_SHIFT		(7)
> -#define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
> -#define STATUS2_CHGDETRUN_MASK		(0x1 << STATUS2_CHGDETRUN_SHIFT)
> -#define STATUS2_DCDTMR_MASK		(0x1 << STATUS2_DCDTMR_SHIFT)
> -#define STATUS2_DXOVP_MASK		(0x1 << STATUS2_DXOVP_SHIFT)
> -#define STATUS2_VBVOLT_MASK		(0x1 << STATUS2_VBVOLT_SHIFT)
> -#define STATUS2_VIDRM_MASK		(0x1 << STATUS2_VIDRM_SHIFT)
> -
> -#define STATUS3_OVP_SHIFT		(2)
> -#define STATUS3_OVP_MASK		(0x1 << STATUS3_OVP_SHIFT)
> +#define MAX77693_STATUS1_ADC_SHIFT		(0)
> +#define MAX77693_STATUS1_ADCLOW_SHIFT		(5)
> +#define MAX77693_STATUS1_ADCERR_SHIFT		(6)
> +#define MAX77693_STATUS1_ADC1K_SHIFT		(7)
> +#define MAX77693_STATUS1_ADC_MASK		(0x1f << MAX77693_STATUS1_ADC_SHIFT)
> +#define MAX77693_STATUS1_ADCLOW_MASK		BIT(MAX77693_STATUS1_ADCLOW_SHIFT)
> +#define MAX77693_STATUS1_ADCERR_MASK		BIT(MAX77693_STATUS1_ADCERR_SHIFT)
> +#define MAX77693_STATUS1_ADC1K_MASK		BIT(MAX77693_STATUS1_ADC1K_SHIFT)
> +
> +#define MAX77693_STATUS2_CHGTYP_SHIFT		(0)
> +#define MAX77693_STATUS2_CHGDETRUN_SHIFT	(3)
> +#define MAX77693_STATUS2_DCDTMR_SHIFT		(4)
> +#define MAX77693_STATUS2_DXOVP_SHIFT		(5)
> +#define MAX77693_STATUS2_VBVOLT_SHIFT		(6)
> +#define MAX77693_STATUS2_VIDRM_SHIFT		(7)
> +#define MAX77693_STATUS2_CHGTYP_MASK		(0x7 << MAX77693_STATUS2_CHGTYP_SHIFT)
> +#define MAX77693_STATUS2_CHGDETRUN_MASK		BIT(MAX77693_STATUS2_CHGDETRUN_SHIFT)
> +#define MAX77693_STATUS2_DCDTMR_MASK		BIT(MAX77693_STATUS2_DCDTMR_SHIFT)
> +#define MAX77693_STATUS2_DXOVP_MASK		BIT(MAX77693_STATUS2_DXOVP_SHIFT)
> +#define MAX77693_STATUS2_VBVOLT_MASK		BIT(MAX77693_STATUS2_VBVOLT_SHIFT)
> +#define MAX77693_STATUS2_VIDRM_MASK		BIT(MAX77693_STATUS2_VIDRM_SHIFT)
> +
> +#define MAX77693_STATUS3_OVP_SHIFT		(2)
> +#define MAX77693_STATUS3_OVP_MASK		BIT(MAX77693_STATUS3_OVP_SHIFT)
>  
>  /* MAX77693 CDETCTRL1~2 register */
>  #define CDETCTRL1_CHGDETEN_SHIFT	(0)
> @@ -362,38 +362,38 @@ enum max77693_muic_reg {
>  #define COMN1SW_MASK			(0x7 << COMN1SW_SHIFT)
>  #define COMP2SW_MASK			(0x7 << COMP2SW_SHIFT)
>  #define COMP_SW_MASK			(COMP2SW_MASK | COMN1SW_MASK)
> -#define CONTROL1_SW_USB			((1 << COMP2SW_SHIFT) \
> +#define MAX77693_CONTROL1_SW_USB	((1 << COMP2SW_SHIFT) \
>  						| (1 << COMN1SW_SHIFT))
> -#define CONTROL1_SW_AUDIO		((2 << COMP2SW_SHIFT) \
> +#define MAX77693_CONTROL1_SW_AUDIO	((2 << COMP2SW_SHIFT) \
>  						| (2 << COMN1SW_SHIFT))
> -#define CONTROL1_SW_UART		((3 << COMP2SW_SHIFT) \
> +#define MAX77693_CONTROL1_SW_UART	((3 << COMP2SW_SHIFT) \
>  						| (3 << COMN1SW_SHIFT))
> -#define CONTROL1_SW_OPEN		((0 << COMP2SW_SHIFT) \
> +#define MAX77693_CONTROL1_SW_OPEN	((0 << COMP2SW_SHIFT) \
>  						| (0 << COMN1SW_SHIFT))
>  
> -#define CONTROL2_LOWPWR_SHIFT		(0)
> -#define CONTROL2_ADCEN_SHIFT		(1)
> -#define CONTROL2_CPEN_SHIFT		(2)
> -#define CONTROL2_SFOUTASRT_SHIFT	(3)
> -#define CONTROL2_SFOUTORD_SHIFT		(4)
> -#define CONTROL2_ACCDET_SHIFT		(5)
> -#define CONTROL2_USBCPINT_SHIFT		(6)
> -#define CONTROL2_RCPS_SHIFT		(7)
> -#define CONTROL2_LOWPWR_MASK		(0x1 << CONTROL2_LOWPWR_SHIFT)
> -#define CONTROL2_ADCEN_MASK		(0x1 << CONTROL2_ADCEN_SHIFT)
> -#define CONTROL2_CPEN_MASK		(0x1 << CONTROL2_CPEN_SHIFT)
> -#define CONTROL2_SFOUTASRT_MASK		(0x1 << CONTROL2_SFOUTASRT_SHIFT)
> -#define CONTROL2_SFOUTORD_MASK		(0x1 << CONTROL2_SFOUTORD_SHIFT)
> -#define CONTROL2_ACCDET_MASK		(0x1 << CONTROL2_ACCDET_SHIFT)
> -#define CONTROL2_USBCPINT_MASK		(0x1 << CONTROL2_USBCPINT_SHIFT)
> -#define CONTROL2_RCPS_MASK		(0x1 << CONTROL2_RCPS_SHIFT)
> -
> -#define CONTROL3_JIGSET_SHIFT		(0)
> -#define CONTROL3_BTLDSET_SHIFT		(2)
> -#define CONTROL3_ADCDBSET_SHIFT		(4)
> -#define CONTROL3_JIGSET_MASK		(0x3 << CONTROL3_JIGSET_SHIFT)
> -#define CONTROL3_BTLDSET_MASK		(0x3 << CONTROL3_BTLDSET_SHIFT)
> -#define CONTROL3_ADCDBSET_MASK		(0x3 << CONTROL3_ADCDBSET_SHIFT)
> +#define MAX77693_CONTROL2_LOWPWR_SHIFT		(0)
> +#define MAX77693_CONTROL2_ADCEN_SHIFT		(1)
> +#define MAX77693_CONTROL2_CPEN_SHIFT		(2)
> +#define MAX77693_CONTROL2_SFOUTASRT_SHIFT	(3)
> +#define MAX77693_CONTROL2_SFOUTORD_SHIFT	(4)
> +#define MAX77693_CONTROL2_ACCDET_SHIFT		(5)
> +#define MAX77693_CONTROL2_USBCPINT_SHIFT	(6)
> +#define MAX77693_CONTROL2_RCPS_SHIFT		(7)

Why the need for the added () all of the sudden?

> +#define MAX77693_CONTROL2_LOWPWR_MASK		BIT(MAX77693_CONTROL2_LOWPWR_SHIFT)
> +#define MAX77693_CONTROL2_ADCEN_MASK		BIT(MAX77693_CONTROL2_ADCEN_SHIFT)
> +#define MAX77693_CONTROL2_CPEN_MASK		BIT(MAX77693_CONTROL2_CPEN_SHIFT)
> +#define MAX77693_CONTROL2_SFOUTASRT_MASK	BIT(MAX77693_CONTROL2_SFOUTASRT_SHIFT)
> +#define MAX77693_CONTROL2_SFOUTORD_MASK		BIT(MAX77693_CONTROL2_SFOUTORD_SHIFT)
> +#define MAX77693_CONTROL2_ACCDET_MASK		BIT(MAX77693_CONTROL2_ACCDET_SHIFT)
> +#define MAX77693_CONTROL2_USBCPINT_MASK		BIT(MAX77693_CONTROL2_USBCPINT_SHIFT)
> +#define MAX77693_CONTROL2_RCPS_MASK		BIT(MAX77693_CONTROL2_RCPS_SHIFT)
> +
> +#define MAX77693_CONTROL3_JIGSET_SHIFT		(0)
> +#define MAX77693_CONTROL3_BTLDSET_SHIFT		(2)
> +#define MAX77693_CONTROL3_ADCDBSET_SHIFT	(4)
> +#define MAX77693_CONTROL3_JIGSET_MASK		(0x3 << MAX77693_CONTROL3_JIGSET_SHIFT)
> +#define MAX77693_CONTROL3_BTLDSET_MASK		(0x3 << MAX77693_CONTROL3_BTLDSET_SHIFT)
> +#define MAX77693_CONTROL3_ADCDBSET_MASK		(0x3 << MAX77693_CONTROL3_ADCDBSET_SHIFT)
>  
>  /* Slave addr = 0x90: Haptic */
>  enum max77693_haptic_reg {
Krzysztof Kozlowski April 29, 2015, 1:23 p.m. UTC | #2
2015-04-29 22:12 GMT+09:00 Lee Jones <lee.jones@linaro.org>:
> On Wed, 29 Apr 2015, Krzysztof Kozlowski wrote:
>
>> Add MAX77693 prefix to some of the defines used in max77693 extcon
>> driver so the max77693-private.h can be included simultaneously with
>> max77843-private.h.
>>
>> Additionally use BIT() macro in header.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>> ---
>>  drivers/extcon/extcon-max77693.c     |  76 +++++++++++++-------------
>>  include/linux/mfd/max77693-private.h | 102 +++++++++++++++++------------------
>>  2 files changed, 91 insertions(+), 87 deletions(-)
>
> [...]
>
>> diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
>> index 8c4143c0c651..7201c0b61bd5 100644
>> --- a/include/linux/mfd/max77693-private.h
>> +++ b/include/linux/mfd/max77693-private.h
>> @@ -310,30 +310,30 @@ enum max77693_muic_reg {
>>  #define INTMASK2_CHGTYP_MASK         (1 << INTMASK2_CHGTYP_SHIFT)
>>
>>  /* MAX77693 MUIC - STATUS1~3 Register */
>> -#define STATUS1_ADC_SHIFT            (0)
>> -#define STATUS1_ADCLOW_SHIFT         (5)
>> -#define STATUS1_ADCERR_SHIFT         (6)
>> -#define STATUS1_ADC1K_SHIFT          (7)
>> -#define STATUS1_ADC_MASK             (0x1f << STATUS1_ADC_SHIFT)
>> -#define STATUS1_ADCLOW_MASK          (0x1 << STATUS1_ADCLOW_SHIFT)
>> -#define STATUS1_ADCERR_MASK          (0x1 << STATUS1_ADCERR_SHIFT)
>> -#define STATUS1_ADC1K_MASK           (0x1 << STATUS1_ADC1K_SHIFT)
>> -
>> -#define STATUS2_CHGTYP_SHIFT         (0)
>> -#define STATUS2_CHGDETRUN_SHIFT              (3)
>> -#define STATUS2_DCDTMR_SHIFT         (4)
>> -#define STATUS2_DXOVP_SHIFT          (5)
>> -#define STATUS2_VBVOLT_SHIFT         (6)
>> -#define STATUS2_VIDRM_SHIFT          (7)
>> -#define STATUS2_CHGTYP_MASK          (0x7 << STATUS2_CHGTYP_SHIFT)
>> -#define STATUS2_CHGDETRUN_MASK               (0x1 << STATUS2_CHGDETRUN_SHIFT)
>> -#define STATUS2_DCDTMR_MASK          (0x1 << STATUS2_DCDTMR_SHIFT)
>> -#define STATUS2_DXOVP_MASK           (0x1 << STATUS2_DXOVP_SHIFT)
>> -#define STATUS2_VBVOLT_MASK          (0x1 << STATUS2_VBVOLT_SHIFT)
>> -#define STATUS2_VIDRM_MASK           (0x1 << STATUS2_VIDRM_SHIFT)
>> -
>> -#define STATUS3_OVP_SHIFT            (2)
>> -#define STATUS3_OVP_MASK             (0x1 << STATUS3_OVP_SHIFT)
>> +#define MAX77693_STATUS1_ADC_SHIFT           (0)
>> +#define MAX77693_STATUS1_ADCLOW_SHIFT                (5)
>> +#define MAX77693_STATUS1_ADCERR_SHIFT                (6)
>> +#define MAX77693_STATUS1_ADC1K_SHIFT         (7)
>> +#define MAX77693_STATUS1_ADC_MASK            (0x1f << MAX77693_STATUS1_ADC_SHIFT)
>> +#define MAX77693_STATUS1_ADCLOW_MASK         BIT(MAX77693_STATUS1_ADCLOW_SHIFT)
>> +#define MAX77693_STATUS1_ADCERR_MASK         BIT(MAX77693_STATUS1_ADCERR_SHIFT)
>> +#define MAX77693_STATUS1_ADC1K_MASK          BIT(MAX77693_STATUS1_ADC1K_SHIFT)
>> +
>> +#define MAX77693_STATUS2_CHGTYP_SHIFT                (0)
>> +#define MAX77693_STATUS2_CHGDETRUN_SHIFT     (3)
>> +#define MAX77693_STATUS2_DCDTMR_SHIFT                (4)
>> +#define MAX77693_STATUS2_DXOVP_SHIFT         (5)
>> +#define MAX77693_STATUS2_VBVOLT_SHIFT                (6)
>> +#define MAX77693_STATUS2_VIDRM_SHIFT         (7)
>> +#define MAX77693_STATUS2_CHGTYP_MASK         (0x7 << MAX77693_STATUS2_CHGTYP_SHIFT)
>> +#define MAX77693_STATUS2_CHGDETRUN_MASK              BIT(MAX77693_STATUS2_CHGDETRUN_SHIFT)
>> +#define MAX77693_STATUS2_DCDTMR_MASK         BIT(MAX77693_STATUS2_DCDTMR_SHIFT)
>> +#define MAX77693_STATUS2_DXOVP_MASK          BIT(MAX77693_STATUS2_DXOVP_SHIFT)
>> +#define MAX77693_STATUS2_VBVOLT_MASK         BIT(MAX77693_STATUS2_VBVOLT_SHIFT)
>> +#define MAX77693_STATUS2_VIDRM_MASK          BIT(MAX77693_STATUS2_VIDRM_SHIFT)
>> +
>> +#define MAX77693_STATUS3_OVP_SHIFT           (2)
>> +#define MAX77693_STATUS3_OVP_MASK            BIT(MAX77693_STATUS3_OVP_SHIFT)
>>
>>  /* MAX77693 CDETCTRL1~2 register */
>>  #define CDETCTRL1_CHGDETEN_SHIFT     (0)
>> @@ -362,38 +362,38 @@ enum max77693_muic_reg {
>>  #define COMN1SW_MASK                 (0x7 << COMN1SW_SHIFT)
>>  #define COMP2SW_MASK                 (0x7 << COMP2SW_SHIFT)
>>  #define COMP_SW_MASK                 (COMP2SW_MASK | COMN1SW_MASK)
>> -#define CONTROL1_SW_USB                      ((1 << COMP2SW_SHIFT) \
>> +#define MAX77693_CONTROL1_SW_USB     ((1 << COMP2SW_SHIFT) \
>>                                               | (1 << COMN1SW_SHIFT))
>> -#define CONTROL1_SW_AUDIO            ((2 << COMP2SW_SHIFT) \
>> +#define MAX77693_CONTROL1_SW_AUDIO   ((2 << COMP2SW_SHIFT) \
>>                                               | (2 << COMN1SW_SHIFT))
>> -#define CONTROL1_SW_UART             ((3 << COMP2SW_SHIFT) \
>> +#define MAX77693_CONTROL1_SW_UART    ((3 << COMP2SW_SHIFT) \
>>                                               | (3 << COMN1SW_SHIFT))
>> -#define CONTROL1_SW_OPEN             ((0 << COMP2SW_SHIFT) \
>> +#define MAX77693_CONTROL1_SW_OPEN    ((0 << COMP2SW_SHIFT) \
>>                                               | (0 << COMN1SW_SHIFT))
>>
>> -#define CONTROL2_LOWPWR_SHIFT                (0)
>> -#define CONTROL2_ADCEN_SHIFT         (1)
>> -#define CONTROL2_CPEN_SHIFT          (2)
>> -#define CONTROL2_SFOUTASRT_SHIFT     (3)
>> -#define CONTROL2_SFOUTORD_SHIFT              (4)
>> -#define CONTROL2_ACCDET_SHIFT                (5)
>> -#define CONTROL2_USBCPINT_SHIFT              (6)
>> -#define CONTROL2_RCPS_SHIFT          (7)
>> -#define CONTROL2_LOWPWR_MASK         (0x1 << CONTROL2_LOWPWR_SHIFT)
>> -#define CONTROL2_ADCEN_MASK          (0x1 << CONTROL2_ADCEN_SHIFT)
>> -#define CONTROL2_CPEN_MASK           (0x1 << CONTROL2_CPEN_SHIFT)
>> -#define CONTROL2_SFOUTASRT_MASK              (0x1 << CONTROL2_SFOUTASRT_SHIFT)
>> -#define CONTROL2_SFOUTORD_MASK               (0x1 << CONTROL2_SFOUTORD_SHIFT)
>> -#define CONTROL2_ACCDET_MASK         (0x1 << CONTROL2_ACCDET_SHIFT)
>> -#define CONTROL2_USBCPINT_MASK               (0x1 << CONTROL2_USBCPINT_SHIFT)
>> -#define CONTROL2_RCPS_MASK           (0x1 << CONTROL2_RCPS_SHIFT)
>> -
>> -#define CONTROL3_JIGSET_SHIFT                (0)
>> -#define CONTROL3_BTLDSET_SHIFT               (2)
>> -#define CONTROL3_ADCDBSET_SHIFT              (4)
>> -#define CONTROL3_JIGSET_MASK         (0x3 << CONTROL3_JIGSET_SHIFT)
>> -#define CONTROL3_BTLDSET_MASK                (0x3 << CONTROL3_BTLDSET_SHIFT)
>> -#define CONTROL3_ADCDBSET_MASK               (0x3 << CONTROL3_ADCDBSET_SHIFT)
>> +#define MAX77693_CONTROL2_LOWPWR_SHIFT               (0)
>> +#define MAX77693_CONTROL2_ADCEN_SHIFT                (1)
>> +#define MAX77693_CONTROL2_CPEN_SHIFT         (2)
>> +#define MAX77693_CONTROL2_SFOUTASRT_SHIFT    (3)
>> +#define MAX77693_CONTROL2_SFOUTORD_SHIFT     (4)
>> +#define MAX77693_CONTROL2_ACCDET_SHIFT               (5)
>> +#define MAX77693_CONTROL2_USBCPINT_SHIFT     (6)
>> +#define MAX77693_CONTROL2_RCPS_SHIFT         (7)
>
> Why the need for the added () all of the sudden?

I did not add them, they existed before. I wanted to do in the patch
only renaming but I may fix it up.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 5bbf15a2d3d7..fa6c2161a138 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -43,7 +43,7 @@  static struct max77693_reg_data default_init_data[] = {
 	{
 		/* STATUS2 - [3]ChgDetRun */
 		.addr = MAX77693_MUIC_REG_STATUS2,
-		.data = STATUS2_CHGDETRUN_MASK,
+		.data = MAX77693_STATUS2_CHGDETRUN_MASK,
 	}, {
 		/* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
 		.addr = MAX77693_MUIC_REG_INTMASK1,
@@ -263,7 +263,7 @@  static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
 		 */
 		ret = regmap_write(info->max77693->regmap_muic,
 				  MAX77693_MUIC_REG_CTRL3,
-				  time << CONTROL3_ADCDBSET_SHIFT);
+				  time << MAX77693_CONTROL3_ADCDBSET_SHIFT);
 		if (ret) {
 			dev_err(info->dev, "failed to set ADC debounce time\n");
 			return ret;
@@ -296,7 +296,7 @@  static int max77693_muic_set_path(struct max77693_muic_info *info,
 	if (attached)
 		ctrl1 = val;
 	else
-		ctrl1 = CONTROL1_SW_OPEN;
+		ctrl1 = MAX77693_CONTROL1_SW_OPEN;
 
 	ret = regmap_update_bits(info->max77693->regmap_muic,
 			MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
@@ -306,13 +306,14 @@  static int max77693_muic_set_path(struct max77693_muic_info *info,
 	}
 
 	if (attached)
-		ctrl2 |= CONTROL2_CPEN_MASK;	/* LowPwr=0, CPEn=1 */
+		ctrl2 |= MAX77693_CONTROL2_CPEN_MASK;	/* LowPwr=0, CPEn=1 */
 	else
-		ctrl2 |= CONTROL2_LOWPWR_MASK;	/* LowPwr=1, CPEn=0 */
+		ctrl2 |= MAX77693_CONTROL2_LOWPWR_MASK;	/* LowPwr=1, CPEn=0 */
 
 	ret = regmap_update_bits(info->max77693->regmap_muic,
 			MAX77693_MUIC_REG_CTRL2,
-			CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
+			MAX77693_CONTROL2_LOWPWR_MASK | MAX77693_CONTROL2_CPEN_MASK,
+			ctrl2);
 	if (ret < 0) {
 		dev_err(info->dev, "failed to update MUIC register\n");
 		return ret;
@@ -354,8 +355,8 @@  static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read ADC value to check cable type and decide cable state
 		 * according to cable type
 		 */
-		adc = info->status[0] & STATUS1_ADC_MASK;
-		adc >>= STATUS1_ADC_SHIFT;
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
 
 		/*
 		 * Check current cable state/cable type and store cable type
@@ -378,8 +379,8 @@  static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read ADC value to check cable type and decide cable state
 		 * according to cable type
 		 */
-		adc = info->status[0] & STATUS1_ADC_MASK;
-		adc >>= STATUS1_ADC_SHIFT;
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
 
 		/*
 		 * Check current cable state/cable type and store cable type
@@ -394,13 +395,13 @@  static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		} else {
 			*attached = true;
 
-			adclow = info->status[0] & STATUS1_ADCLOW_MASK;
-			adclow >>= STATUS1_ADCLOW_SHIFT;
-			adc1k = info->status[0] & STATUS1_ADC1K_MASK;
-			adc1k >>= STATUS1_ADC1K_SHIFT;
+			adclow = info->status[0] & MAX77693_STATUS1_ADCLOW_MASK;
+			adclow >>= MAX77693_STATUS1_ADCLOW_SHIFT;
+			adc1k = info->status[0] & MAX77693_STATUS1_ADC1K_MASK;
+			adc1k >>= MAX77693_STATUS1_ADC1K_SHIFT;
 
-			vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
-			vbvolt >>= STATUS2_VBVOLT_SHIFT;
+			vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+			vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
 
 			/**
 			 * [0x1|VBVolt|ADCLow|ADC1K]
@@ -425,8 +426,8 @@  static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read charger type to check cable type and decide cable state
 		 * according to type of charger cable.
 		 */
-		chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
-		chg_type >>= STATUS2_CHGTYP_SHIFT;
+		chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+		chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
 
 		if (chg_type == MAX77693_CHARGER_TYPE_NONE) {
 			*attached = false;
@@ -450,10 +451,10 @@  static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read ADC value to check cable type and decide cable state
 		 * according to cable type
 		 */
-		adc = info->status[0] & STATUS1_ADC_MASK;
-		adc >>= STATUS1_ADC_SHIFT;
-		chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
-		chg_type >>= STATUS2_CHGTYP_SHIFT;
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
+		chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+		chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
 
 		if (adc == MAX77693_MUIC_ADC_OPEN
 				&& chg_type == MAX77693_CHARGER_TYPE_NONE)
@@ -465,8 +466,8 @@  static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read vbvolt field, if vbvolt is 1,
 		 * this cable is used for charging.
 		 */
-		vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
-		vbvolt >>= STATUS2_VBVOLT_SHIFT;
+		vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+		vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
 
 		cable_type = vbvolt;
 		break;
@@ -548,7 +549,8 @@  static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	}
 
 	/* Dock-Car/Desk/Audio, PATH:AUDIO */
-	ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+	ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+					attached);
 	if (ret < 0)
 		return ret;
 	extcon_set_cable_state(info->edev, dock_name, attached);
@@ -613,14 +615,16 @@  static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 	case MAX77693_MUIC_GND_USB_HOST:
 	case MAX77693_MUIC_GND_USB_HOST_VB:
 		/* USB_HOST, PATH: AP_USB */
-		ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
+		ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_USB,
+						attached);
 		if (ret < 0)
 			return ret;
 		extcon_set_cable_state(info->edev, "USB-Host", attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
 		/* Audio Video Cable with load, PATH:AUDIO */
-		ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+		ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+						attached);
 		if (ret < 0)
 			return ret;
 		extcon_set_cable_state(info->edev,
@@ -645,7 +649,7 @@  static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 {
 	char cable_name[32];
 	int ret = 0;
-	u8 path = CONTROL1_SW_OPEN;
+	u8 path = MAX77693_CONTROL1_SW_OPEN;
 
 	dev_info(info->dev,
 		"external connector is %s (adc:0x%02x)\n",
@@ -655,22 +659,22 @@  static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
 		/* PATH:AP_USB */
 		strcpy(cable_name, "JIG-USB-OFF");
-		path = CONTROL1_SW_USB;
+		path = MAX77693_CONTROL1_SW_USB;
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
 		strcpy(cable_name, "JIG-USB-ON");
-		path = CONTROL1_SW_USB;
+		path = MAX77693_CONTROL1_SW_USB;
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
 		/* PATH:AP_UART */
 		strcpy(cable_name, "JIG-UART-OFF");
-		path = CONTROL1_SW_UART;
+		path = MAX77693_CONTROL1_SW_UART;
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
 		/* PATH:AP_UART */
 		strcpy(cable_name, "JIG-UART-ON");
-		path = CONTROL1_SW_UART;
+		path = MAX77693_CONTROL1_SW_UART;
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s jig cable\n",
@@ -1232,12 +1236,12 @@  static int max77693_muic_probe(struct platform_device *pdev)
 		if (muic_pdata->path_uart)
 			info->path_uart = muic_pdata->path_uart;
 		else
-			info->path_uart = CONTROL1_SW_UART;
+			info->path_uart = MAX77693_CONTROL1_SW_UART;
 
 		if (muic_pdata->path_usb)
 			info->path_usb = muic_pdata->path_usb;
 		else
-			info->path_usb = CONTROL1_SW_USB;
+			info->path_usb = MAX77693_CONTROL1_SW_USB;
 
 		/*
 		 * Default delay time for detecting cable state
@@ -1249,8 +1253,8 @@  static int max77693_muic_probe(struct platform_device *pdev)
 		else
 			delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
 	} else {
-		info->path_usb = CONTROL1_SW_USB;
-		info->path_uart = CONTROL1_SW_UART;
+		info->path_usb = MAX77693_CONTROL1_SW_USB;
+		info->path_uart = MAX77693_CONTROL1_SW_UART;
 		delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
 	}
 
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index 8c4143c0c651..7201c0b61bd5 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -310,30 +310,30 @@  enum max77693_muic_reg {
 #define INTMASK2_CHGTYP_MASK		(1 << INTMASK2_CHGTYP_SHIFT)
 
 /* MAX77693 MUIC - STATUS1~3 Register */
-#define STATUS1_ADC_SHIFT		(0)
-#define STATUS1_ADCLOW_SHIFT		(5)
-#define STATUS1_ADCERR_SHIFT		(6)
-#define STATUS1_ADC1K_SHIFT		(7)
-#define STATUS1_ADC_MASK		(0x1f << STATUS1_ADC_SHIFT)
-#define STATUS1_ADCLOW_MASK		(0x1 << STATUS1_ADCLOW_SHIFT)
-#define STATUS1_ADCERR_MASK		(0x1 << STATUS1_ADCERR_SHIFT)
-#define STATUS1_ADC1K_MASK		(0x1 << STATUS1_ADC1K_SHIFT)
-
-#define STATUS2_CHGTYP_SHIFT		(0)
-#define STATUS2_CHGDETRUN_SHIFT		(3)
-#define STATUS2_DCDTMR_SHIFT		(4)
-#define STATUS2_DXOVP_SHIFT		(5)
-#define STATUS2_VBVOLT_SHIFT		(6)
-#define STATUS2_VIDRM_SHIFT		(7)
-#define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
-#define STATUS2_CHGDETRUN_MASK		(0x1 << STATUS2_CHGDETRUN_SHIFT)
-#define STATUS2_DCDTMR_MASK		(0x1 << STATUS2_DCDTMR_SHIFT)
-#define STATUS2_DXOVP_MASK		(0x1 << STATUS2_DXOVP_SHIFT)
-#define STATUS2_VBVOLT_MASK		(0x1 << STATUS2_VBVOLT_SHIFT)
-#define STATUS2_VIDRM_MASK		(0x1 << STATUS2_VIDRM_SHIFT)
-
-#define STATUS3_OVP_SHIFT		(2)
-#define STATUS3_OVP_MASK		(0x1 << STATUS3_OVP_SHIFT)
+#define MAX77693_STATUS1_ADC_SHIFT		(0)
+#define MAX77693_STATUS1_ADCLOW_SHIFT		(5)
+#define MAX77693_STATUS1_ADCERR_SHIFT		(6)
+#define MAX77693_STATUS1_ADC1K_SHIFT		(7)
+#define MAX77693_STATUS1_ADC_MASK		(0x1f << MAX77693_STATUS1_ADC_SHIFT)
+#define MAX77693_STATUS1_ADCLOW_MASK		BIT(MAX77693_STATUS1_ADCLOW_SHIFT)
+#define MAX77693_STATUS1_ADCERR_MASK		BIT(MAX77693_STATUS1_ADCERR_SHIFT)
+#define MAX77693_STATUS1_ADC1K_MASK		BIT(MAX77693_STATUS1_ADC1K_SHIFT)
+
+#define MAX77693_STATUS2_CHGTYP_SHIFT		(0)
+#define MAX77693_STATUS2_CHGDETRUN_SHIFT	(3)
+#define MAX77693_STATUS2_DCDTMR_SHIFT		(4)
+#define MAX77693_STATUS2_DXOVP_SHIFT		(5)
+#define MAX77693_STATUS2_VBVOLT_SHIFT		(6)
+#define MAX77693_STATUS2_VIDRM_SHIFT		(7)
+#define MAX77693_STATUS2_CHGTYP_MASK		(0x7 << MAX77693_STATUS2_CHGTYP_SHIFT)
+#define MAX77693_STATUS2_CHGDETRUN_MASK		BIT(MAX77693_STATUS2_CHGDETRUN_SHIFT)
+#define MAX77693_STATUS2_DCDTMR_MASK		BIT(MAX77693_STATUS2_DCDTMR_SHIFT)
+#define MAX77693_STATUS2_DXOVP_MASK		BIT(MAX77693_STATUS2_DXOVP_SHIFT)
+#define MAX77693_STATUS2_VBVOLT_MASK		BIT(MAX77693_STATUS2_VBVOLT_SHIFT)
+#define MAX77693_STATUS2_VIDRM_MASK		BIT(MAX77693_STATUS2_VIDRM_SHIFT)
+
+#define MAX77693_STATUS3_OVP_SHIFT		(2)
+#define MAX77693_STATUS3_OVP_MASK		BIT(MAX77693_STATUS3_OVP_SHIFT)
 
 /* MAX77693 CDETCTRL1~2 register */
 #define CDETCTRL1_CHGDETEN_SHIFT	(0)
@@ -362,38 +362,38 @@  enum max77693_muic_reg {
 #define COMN1SW_MASK			(0x7 << COMN1SW_SHIFT)
 #define COMP2SW_MASK			(0x7 << COMP2SW_SHIFT)
 #define COMP_SW_MASK			(COMP2SW_MASK | COMN1SW_MASK)
-#define CONTROL1_SW_USB			((1 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_USB	((1 << COMP2SW_SHIFT) \
 						| (1 << COMN1SW_SHIFT))
-#define CONTROL1_SW_AUDIO		((2 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_AUDIO	((2 << COMP2SW_SHIFT) \
 						| (2 << COMN1SW_SHIFT))
-#define CONTROL1_SW_UART		((3 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_UART	((3 << COMP2SW_SHIFT) \
 						| (3 << COMN1SW_SHIFT))
-#define CONTROL1_SW_OPEN		((0 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_OPEN	((0 << COMP2SW_SHIFT) \
 						| (0 << COMN1SW_SHIFT))
 
-#define CONTROL2_LOWPWR_SHIFT		(0)
-#define CONTROL2_ADCEN_SHIFT		(1)
-#define CONTROL2_CPEN_SHIFT		(2)
-#define CONTROL2_SFOUTASRT_SHIFT	(3)
-#define CONTROL2_SFOUTORD_SHIFT		(4)
-#define CONTROL2_ACCDET_SHIFT		(5)
-#define CONTROL2_USBCPINT_SHIFT		(6)
-#define CONTROL2_RCPS_SHIFT		(7)
-#define CONTROL2_LOWPWR_MASK		(0x1 << CONTROL2_LOWPWR_SHIFT)
-#define CONTROL2_ADCEN_MASK		(0x1 << CONTROL2_ADCEN_SHIFT)
-#define CONTROL2_CPEN_MASK		(0x1 << CONTROL2_CPEN_SHIFT)
-#define CONTROL2_SFOUTASRT_MASK		(0x1 << CONTROL2_SFOUTASRT_SHIFT)
-#define CONTROL2_SFOUTORD_MASK		(0x1 << CONTROL2_SFOUTORD_SHIFT)
-#define CONTROL2_ACCDET_MASK		(0x1 << CONTROL2_ACCDET_SHIFT)
-#define CONTROL2_USBCPINT_MASK		(0x1 << CONTROL2_USBCPINT_SHIFT)
-#define CONTROL2_RCPS_MASK		(0x1 << CONTROL2_RCPS_SHIFT)
-
-#define CONTROL3_JIGSET_SHIFT		(0)
-#define CONTROL3_BTLDSET_SHIFT		(2)
-#define CONTROL3_ADCDBSET_SHIFT		(4)
-#define CONTROL3_JIGSET_MASK		(0x3 << CONTROL3_JIGSET_SHIFT)
-#define CONTROL3_BTLDSET_MASK		(0x3 << CONTROL3_BTLDSET_SHIFT)
-#define CONTROL3_ADCDBSET_MASK		(0x3 << CONTROL3_ADCDBSET_SHIFT)
+#define MAX77693_CONTROL2_LOWPWR_SHIFT		(0)
+#define MAX77693_CONTROL2_ADCEN_SHIFT		(1)
+#define MAX77693_CONTROL2_CPEN_SHIFT		(2)
+#define MAX77693_CONTROL2_SFOUTASRT_SHIFT	(3)
+#define MAX77693_CONTROL2_SFOUTORD_SHIFT	(4)
+#define MAX77693_CONTROL2_ACCDET_SHIFT		(5)
+#define MAX77693_CONTROL2_USBCPINT_SHIFT	(6)
+#define MAX77693_CONTROL2_RCPS_SHIFT		(7)
+#define MAX77693_CONTROL2_LOWPWR_MASK		BIT(MAX77693_CONTROL2_LOWPWR_SHIFT)
+#define MAX77693_CONTROL2_ADCEN_MASK		BIT(MAX77693_CONTROL2_ADCEN_SHIFT)
+#define MAX77693_CONTROL2_CPEN_MASK		BIT(MAX77693_CONTROL2_CPEN_SHIFT)
+#define MAX77693_CONTROL2_SFOUTASRT_MASK	BIT(MAX77693_CONTROL2_SFOUTASRT_SHIFT)
+#define MAX77693_CONTROL2_SFOUTORD_MASK		BIT(MAX77693_CONTROL2_SFOUTORD_SHIFT)
+#define MAX77693_CONTROL2_ACCDET_MASK		BIT(MAX77693_CONTROL2_ACCDET_SHIFT)
+#define MAX77693_CONTROL2_USBCPINT_MASK		BIT(MAX77693_CONTROL2_USBCPINT_SHIFT)
+#define MAX77693_CONTROL2_RCPS_MASK		BIT(MAX77693_CONTROL2_RCPS_SHIFT)
+
+#define MAX77693_CONTROL3_JIGSET_SHIFT		(0)
+#define MAX77693_CONTROL3_BTLDSET_SHIFT		(2)
+#define MAX77693_CONTROL3_ADCDBSET_SHIFT	(4)
+#define MAX77693_CONTROL3_JIGSET_MASK		(0x3 << MAX77693_CONTROL3_JIGSET_SHIFT)
+#define MAX77693_CONTROL3_BTLDSET_MASK		(0x3 << MAX77693_CONTROL3_BTLDSET_SHIFT)
+#define MAX77693_CONTROL3_ADCDBSET_MASK		(0x3 << MAX77693_CONTROL3_ADCDBSET_SHIFT)
 
 /* Slave addr = 0x90: Haptic */
 enum max77693_haptic_reg {