| Message ID | 1431066079-19725-1-git-send-email-zajec5@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Rafa?, On 08/05/2015 08:21, Rafa? Mi?ecki wrote: > Starting with commits > 8ff16cf ("Documentation: devicetree: m25p80: add "nor-jedec" binding") > 1103b85 ("mtd: m25p80: bind to "nor-jedec" ID, for auto-detection") > we have "nor-jedec" binding indicating support for JEDEC identification. I have the same question that for mvebu: did you actually check that all the NOR flash referenced in the dts supports the JEDEC identification? Then again, if it id the case I will add it in mvebu/dt soon, unless Andrew, Jason or any other developer who has submitted the dts is aware of a restriction about applying it. Thanks, Gregory > > Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> > --- > arch/arm/boot/dts/kirkwood-b3.dts | 2 +- > arch/arm/boot/dts/kirkwood-cloudbox.dts | 2 +- > arch/arm/boot/dts/kirkwood-dir665.dts | 2 +- > arch/arm/boot/dts/kirkwood-dreamplug.dts | 2 +- > arch/arm/boot/dts/kirkwood-lsxl.dtsi | 2 +- > arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 2 +- > arch/arm/boot/dts/kirkwood-netxbig.dtsi | 2 +- > arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 2 +- > arch/arm/boot/dts/kirkwood-rd88f6192.dts | 2 +- > arch/arm/boot/dts/kirkwood-synology.dtsi | 2 +- > arch/arm/boot/dts/kirkwood-t5325.dts | 2 +- > arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +- > 12 files changed, 12 insertions(+), 12 deletions(-) > > diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts > index c9247f8..103551f 100644 > --- a/arch/arm/boot/dts/kirkwood-b3.dts > +++ b/arch/arm/boot/dts/kirkwood-b3.dts > @@ -74,7 +74,7 @@ > m25p16@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "st,m25p16"; > + compatible = "st,m25p16", "nor-jedec"; > reg = <0>; > spi-max-frequency = <40000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts > index ab6ab49..4a04985 100644 > --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts > +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts > @@ -42,7 +42,7 @@ > flash@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "mxicy,mx25l4005a"; > + compatible = "mxicy,mx25l4005a", "nor-jedec"; > reg = <0>; > spi-max-frequency = <20000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts > index 786959e..94c80a2 100644 > --- a/arch/arm/boot/dts/kirkwood-dir665.dts > +++ b/arch/arm/boot/dts/kirkwood-dir665.dts > @@ -93,7 +93,7 @@ > m25p80@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "mxicy,mx25l12805d"; > + compatible = "mxicy,mx25l12805d", "nor-jedec"; > spi-max-frequency = <50000000>; > reg = <0>; > > diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts > index 6467c79..c9a1c09 100644 > --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts > +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts > @@ -42,7 +42,7 @@ > m25p40@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "mxicy,mx25l1606e"; > + compatible = "mxicy,mx25l1606e", "nor-jedec"; > reg = <0>; > spi-max-frequency = <50000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi > index 5348447..58e197a 100644 > --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi > +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi > @@ -74,7 +74,7 @@ > m25p40@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "m25p40"; > + compatible = "m25p40", "nor-jedec"; > reg = <0>; > spi-max-frequency = <25000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts > index f82827d..ae68061 100644 > --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts > +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts > @@ -65,7 +65,7 @@ > flash@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "mxicy,mx25l12805d"; > + compatible = "mxicy,mx25l12805d", "nor-jedec"; > reg = <0>; > spi-max-frequency = <50000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi > index b0cfb7c..11d21c0 100644 > --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi > +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi > @@ -33,7 +33,7 @@ > flash@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "mxicy,mx25l4005a"; > + compatible = "mxicy,mx25l4005a", "nor-jedec"; > reg = <0>; > spi-max-frequency = <20000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi > index fe6c024..b860b7f 100644 > --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi > +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi > @@ -29,7 +29,7 @@ > flash@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "mxicy,mx25l4005a"; > + compatible = "mxicy,mx25l4005a", "nor-jedec"; > reg = <0>; > spi-max-frequency = <20000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts > index 35a29de..80dff2f 100644 > --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts > +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts > @@ -61,7 +61,7 @@ > m25p128@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "st,m25p128"; > + compatible = "st,m25p128", "nor-jedec"; > reg = <0>; > spi-max-frequency = <20000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi > index 8be5b2e..48f4b02 100644 > --- a/arch/arm/boot/dts/kirkwood-synology.dtsi > +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi > @@ -217,7 +217,7 @@ > m25p80@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "st,m25p80"; > + compatible = "st,m25p80", "nor-jedec"; > reg = <0>; > spi-max-frequency = <20000000>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts > index 610ec0f..5dbd9a0 100644 > --- a/arch/arm/boot/dts/kirkwood-t5325.dts > +++ b/arch/arm/boot/dts/kirkwood-t5325.dts > @@ -88,7 +88,7 @@ > flash@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "st,m25p80"; > + compatible = "st,m25p80", "nor-jedec"; > spi-max-frequency = <86000000>; > reg = <0>; > mode = <0>; > diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi > index df7f152..cbb1049 100644 > --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi > +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi > @@ -49,7 +49,7 @@ > m25p128@0 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "m25p128"; > + compatible = "m25p128", "nor-jedec"; > reg = <0>; > spi-max-frequency = <20000000>; > mode = <0>; >
On Mon, May 11, 2015 at 03:09:28PM +0200, Gregory CLEMENT wrote: > Hi Rafa??, > > On 08/05/2015 08:21, Rafa?? Mi??ecki wrote: > > Starting with commits > > 8ff16cf ("Documentation: devicetree: m25p80: add "nor-jedec" binding") > > 1103b85 ("mtd: m25p80: bind to "nor-jedec" ID, for auto-detection") > > we have "nor-jedec" binding indicating support for JEDEC identification. > > I have the same question that for mvebu: did you actually check that all > the NOR flash referenced in the dts supports the JEDEC identification? Hi Gregory That is a good question, but i've no knowledge in this area. Rafa??, what is the long term plan? Will the device specific property be removed sometime in the future, and nor-jedec probing be used to identify the device? Is this already the actual behaviour? I've seen warnings when the DT entry specified the wrong device, something like: Found ABC, Expected XYZ. Andrew
On 11 May 2015 at 15:09, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote: > On 08/05/2015 08:21, Rafa? Mi?ecki wrote: >> Starting with commits >> 8ff16cf ("Documentation: devicetree: m25p80: add "nor-jedec" binding") >> 1103b85 ("mtd: m25p80: bind to "nor-jedec" ID, for auto-detection") >> we have "nor-jedec" binding indicating support for JEDEC identification. > > I have the same question that for mvebu: did you actually check that all > the NOR flash referenced in the dts supports the JEDEC identification? Yes, I checked *all* of them. > Then again, if it id the case I will add it in mvebu/dt soon, unless Andrew, > Jason or any other developer who has submitted the dts is aware of a restriction > about applying it. Please wait to see if the binding will be changed or not (tegre patch thread discussion).
On 11 May 2015 at 15:25, Andrew Lunn <andrew@lunn.ch> wrote: > On Mon, May 11, 2015 at 03:09:28PM +0200, Gregory CLEMENT wrote: >> On 08/05/2015 08:21, Rafa?? Mi??ecki wrote: >> > Starting with commits >> > 8ff16cf ("Documentation: devicetree: m25p80: add "nor-jedec" binding") >> > 1103b85 ("mtd: m25p80: bind to "nor-jedec" ID, for auto-detection") >> > we have "nor-jedec" binding indicating support for JEDEC identification. >> >> I have the same question that for mvebu: did you actually check that all >> the NOR flash referenced in the dts supports the JEDEC identification? > > Rafa??, what is the long term plan? One thing we should do for sure is: 1) Not adding support for new bidnings in the spi-nor driver unless some chip really needs some special handling 2) Make sure all new entries will include both: specific chip & generic JEDEC bindings > Will the device specific property > be removed sometime in the future, and nor-jedec probing be used to > identify the device? Is this already the actual behaviour? Probably not really, because of keeping backward compatibility. Please mind some out-of-tree DT users and some DTB files being natively on flashes instead of appended to the kernel. The cost is low, so probably we can live with that. > I've seen > warnings when the DT entry specified the wrong device, something like: > Found ABC, Expected XYZ. This happens when DT/platform data provides wrong info about flash chipset. Driver always queries hardware, even if a flash model was provided. In case of finding different flash, it prints a warning.
Hi Rafa?, On 12/05/2015 07:07, Rafa? Mi?ecki wrote: > On 11 May 2015 at 15:09, Gregory CLEMENT > <gregory.clement@free-electrons.com> wrote: >> On 08/05/2015 08:21, Rafa? Mi?ecki wrote: >>> Starting with commits >>> 8ff16cf ("Documentation: devicetree: m25p80: add "nor-jedec" binding") >>> 1103b85 ("mtd: m25p80: bind to "nor-jedec" ID, for auto-detection") >>> we have "nor-jedec" binding indicating support for JEDEC identification. >> >> I have the same question that for mvebu: did you actually check that all >> the NOR flash referenced in the dts supports the JEDEC identification? > > Yes, I checked *all* of them. > > >> Then again, if it id the case I will add it in mvebu/dt soon, unless Andrew, >> Jason or any other developer who has submitted the dts is aware of a restriction >> about applying it. > > Please wait to see if the binding will be changed or not (tegre patch > thread discussion). > OK I won't take them, and I am waiting for a v2. Thanks, Gregory
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index c9247f8..103551f 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -74,7 +74,7 @@ m25p16@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p16"; + compatible = "st,m25p16", "nor-jedec"; reg = <0>; spi-max-frequency = <40000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index ab6ab49..4a04985 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -42,7 +42,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "nor-jedec"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 786959e..94c80a2 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -93,7 +93,7 @@ m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l12805d"; + compatible = "mxicy,mx25l12805d", "nor-jedec"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 6467c79..c9a1c09 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -42,7 +42,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l1606e"; + compatible = "mxicy,mx25l1606e", "nor-jedec"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 5348447..58e197a 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -74,7 +74,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p40"; + compatible = "m25p40", "nor-jedec"; reg = <0>; spi-max-frequency = <25000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index f82827d..ae68061 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -65,7 +65,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l12805d"; + compatible = "mxicy,mx25l12805d", "nor-jedec"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index b0cfb7c..11d21c0 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -33,7 +33,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "nor-jedec"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index fe6c024..b860b7f 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -29,7 +29,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "nor-jedec"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index 35a29de..80dff2f 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -61,7 +61,7 @@ m25p128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "nor-jedec"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 8be5b2e..48f4b02 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -217,7 +217,7 @@ m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "st,m25p80", "nor-jedec"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 610ec0f..5dbd9a0 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -88,7 +88,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "st,m25p80", "nor-jedec"; spi-max-frequency = <86000000>; reg = <0>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index df7f152..cbb1049 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -49,7 +49,7 @@ m25p128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p128"; + compatible = "m25p128", "nor-jedec"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>;
Starting with commits 8ff16cf ("Documentation: devicetree: m25p80: add "nor-jedec" binding") 1103b85 ("mtd: m25p80: bind to "nor-jedec" ID, for auto-detection") we have "nor-jedec" binding indicating support for JEDEC identification. Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> --- arch/arm/boot/dts/kirkwood-b3.dts | 2 +- arch/arm/boot/dts/kirkwood-cloudbox.dts | 2 +- arch/arm/boot/dts/kirkwood-dir665.dts | 2 +- arch/arm/boot/dts/kirkwood-dreamplug.dts | 2 +- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 2 +- arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 2 +- arch/arm/boot/dts/kirkwood-netxbig.dtsi | 2 +- arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 2 +- arch/arm/boot/dts/kirkwood-rd88f6192.dts | 2 +- arch/arm/boot/dts/kirkwood-synology.dtsi | 2 +- arch/arm/boot/dts/kirkwood-t5325.dts | 2 +- arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-)