| Message ID | 1431351773-2031-3-git-send-email-k.kozlowski.k@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 05/11/15 22:42, Krzysztof Kozlowski wrote: > Usage of labels instead of full paths reduces possible mistakes when > overriding nodes. > Well, I'm not sure what kind of the possible mistakes you mentioned...? I don't think we need to use the label for gic, combiner. - Kukjin > Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> > --- > arch/arm/boot/dts/exynos4210.dtsi | 43 +++++++++++++++++++-------------------- > 1 file changed, 21 insertions(+), 22 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi > index 76b84852f29c..a9a55304e31a 100644 > --- a/arch/arm/boot/dts/exynos4210.dtsi > +++ b/arch/arm/boot/dts/exynos4210.dtsi > @@ -52,16 +52,6 @@ > }; > }; > > - pmu_system_controller: system-controller@10020000 { > - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", > - "clkout4", "clkout8", "clkout9"; > - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, > - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, > - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, > - <&clock CLK_XUSBXTI>; > - #clock-cells = <1>; > - }; > - > sysram: sysram@02020000 { > compatible = "mmio-sram"; > reg = <0x02020000 0x20000>; > @@ -95,18 +85,6 @@ > arm,data-latency = <2 2 1>; > }; > > - gic: interrupt-controller@10490000 { > - cpu-offset = <0x8000>; > - }; > - > - combiner: interrupt-controller@10440000 { > - samsung,combiner-nr = <16>; > - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, > - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, > - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, > - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; > - }; > - > mct: mct@10050000 { > compatible = "samsung,exynos4210-mct"; > reg = <0x10050000 0x800>; > @@ -245,3 +223,24 @@ > status = "disabled"; > }; > }; > + > +&gic { > + cpu-offset = <0x8000>; > +}; > + > +&combiner { > + samsung,combiner-nr = <16>; > + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, > + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, > + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, > + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; > +}; > + > +&pmu_system_controller { > + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", > + "clkout4", "clkout8", "clkout9"; > + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, > + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, > + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; > + #clock-cells = <1>; > +}; -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
W dniu 13.05.2015 o 18:02, Kukjin Kim pisze: > On 05/11/15 22:42, Krzysztof Kozlowski wrote: >> Usage of labels instead of full paths reduces possible mistakes when >> overriding nodes. >> > Well, I'm not sure what kind of the possible mistakes you mentioned...? One can make a mistake in path when overriding. For example we have: exynos4.dtsi: / { gic: interrupt-controller@10490000 { ... }; } and someone can add in child dtsi (like exynos4210.dtsi): / { soc { interrupt-controller@10490000 { cpu-offset = <0x8000>; } } } or he can make a mistake in address. As a result the gic node won't be properly overridden. > > I don't think we need to use the label for gic, combiner. They are overridden by child DTSI. First definition is in exynos4.dtsi and exynos4210.dtsi adds a cpu-offset. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 76b84852f29c..a9a55304e31a 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -52,16 +52,6 @@ }; }; - pmu_system_controller: system-controller@10020000 { - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, - <&clock CLK_XUSBXTI>; - #clock-cells = <1>; - }; - sysram: sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; @@ -95,18 +85,6 @@ arm,data-latency = <2 2 1>; }; - gic: interrupt-controller@10490000 { - cpu-offset = <0x8000>; - }; - - combiner: interrupt-controller@10440000 { - samsung,combiner-nr = <16>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; - }; - mct: mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; @@ -245,3 +223,24 @@ status = "disabled"; }; }; + +&gic { + cpu-offset = <0x8000>; +}; + +&combiner { + samsung,combiner-nr = <16>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; +}; + +&pmu_system_controller { + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; +};
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> --- arch/arm/boot/dts/exynos4210.dtsi | 43 +++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 22 deletions(-)