| Message ID | 555414EA.80301@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, May 13, 2015 at 10:22:18PM -0500, Eric Sandeen wrote: > xfs_repair compares attr names in the root namespace to > two special/reserved names, "SGI_ACL_FILE" and "SGI_ACL_DEFAULT" > and if the value in them aren't valid acls, flags this as > an inconsistency. > > However, due to various bugs, xfs_repair may only compare > a smaller portion of the on-disk value; hence either > substrings or superstrings may match, and false-positive > corruption will be detected. This test checks for those > false positives; i.e. the ACL names created in this test > may cause xfs_repair to "fix" them, but it should not. > > Signed-off-by: Eric Sandeen <sandeen@redhat.com> > --- > > patch for xfs_repair will be sent shortly > > diff --git a/tests/xfs/053 b/tests/xfs/053 > new file mode 100755 > index 0000000..284c014 > --- /dev/null > +++ b/tests/xfs/053 > @@ -0,0 +1,76 @@ > +#! /bin/bash > +# FS QA Test 053 > +# > +# Ensure that xfs_repair can properly spot SGI_ACL_FILE > +# and SGI_ACL_DEFAULT in the root attr namespace. > +# > +# Due to bugs here and there, we sometimes matched on partial > +# strings with those names, and threw off xfs_repair. > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2015 Red Hat, Inc. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! I haven't run the test yet, but I don't see the trap and cleanup function, is that on purpose? > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter . ./common/attr and _require_attrs ? > + > +# real QA test starts here > + > +_supported_fs xfs > +_supported_os IRIX Linux > +_require_scratch > + > +rm -f $seqres.full Seems this file is not used and the rm can be omitted. > + > +_scratch_mount Should _scratch_mkfs first > + > +# Create root namespace attr names which are substrings or superstrings > +# of the reserved ACL names, and make sure xfs_repair copes. > + > +# Due to various bugs, either the compared length was shorter > +# than the reserved name (7 chars), so substrings matched, and/or only > +# the reserved name length was compared, so superstrings matched. > + > +rm -f $SCRATCH_MNT/$seq.* If it's fresh fs, this seems unnecessary. > + > +# actual reserved names: > +# SGI_ACL_FILE SGI_ACL_DEFAULT \ > +for NAME in SGI_ACL \ > + SGI_ACL_F SGI_ACL_D \ > + SGI_ACL_FILE_FOO SGI_ACL_DEFAULT_FOO; do > + touch $SCRATCH_MNT/${seq}.${NAME} > + attr -R -s $NAME -V "Wow, such $NAME" $SCRATCH_MNT/${seq}.${NAME} \ > + | _filter_scratch $ATTR_PROG Thanks, Eryu > +done > + > +# Older repair failed because it sees the above names as matching > +# SGI_ACL_FILE / SGI_ACL_DEFAULT but w/o valid acls on them > + > +# The test harness will catch this (false positive) corruption > + > +# success, all done > +status=0 > +exit > diff --git a/tests/xfs/053.out b/tests/xfs/053.out > new file mode 100644 > index 0000000..d876555 > --- /dev/null > +++ b/tests/xfs/053.out > @@ -0,0 +1,11 @@ > +QA output created by 053 > +Attribute "SGI_ACL" set to a 17 byte value for SCRATCH_MNT/053.SGI_ACL: > +Wow, such SGI_ACL > +Attribute "SGI_ACL_F" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_F: > +Wow, such SGI_ACL_F > +Attribute "SGI_ACL_D" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_D: > +Wow, such SGI_ACL_D > +Attribute "SGI_ACL_FILE_FOO" set to a 26 byte value for SCRATCH_MNT/053.SGI_ACL_FILE_FOO: > +Wow, such SGI_ACL_FILE_FOO > +Attribute "SGI_ACL_DEFAULT_FOO" set to a 29 byte value for SCRATCH_MNT/053.SGI_ACL_DEFAULT_FOO: > +Wow, such SGI_ACL_DEFAULT_FOO > diff --git a/tests/xfs/group b/tests/xfs/group > index 58144d2..26dd881 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -50,6 +50,7 @@ > 050 quota auto quick > 051 auto log metadata > 052 quota db auto quick > +053 acl auto > 054 quota auto quick > 055 dump ioctl remote tape > 056 dump ioctl auto quick > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
All good advice; sigh, I am rusty! Thanks, will resend with fixes. (Started as using test dev so left some things out; not sure I need a trap if there is nothing to clean up? Also do we need to require attr on xfs? Can't remember if we can compile that out, but I guess it's harmless to include it) Thanks, -Eric > On May 13, 2015, at 11:55 PM, Eryu Guan <eguan@redhat.com> wrote: > >> On Wed, May 13, 2015 at 10:22:18PM -0500, Eric Sandeen wrote: >> xfs_repair compares attr names in the root namespace to >> two special/reserved names, "SGI_ACL_FILE" and "SGI_ACL_DEFAULT" >> and if the value in them aren't valid acls, flags this as >> an inconsistency. >> >> However, due to various bugs, xfs_repair may only compare >> a smaller portion of the on-disk value; hence either >> substrings or superstrings may match, and false-positive >> corruption will be detected. This test checks for those >> false positives; i.e. the ACL names created in this test >> may cause xfs_repair to "fix" them, but it should not. >> >> Signed-off-by: Eric Sandeen <sandeen@redhat.com> >> --- >> >> patch for xfs_repair will be sent shortly >> >> diff --git a/tests/xfs/053 b/tests/xfs/053 >> new file mode 100755 >> index 0000000..284c014 >> --- /dev/null >> +++ b/tests/xfs/053 >> @@ -0,0 +1,76 @@ >> +#! /bin/bash >> +# FS QA Test 053 >> +# >> +# Ensure that xfs_repair can properly spot SGI_ACL_FILE >> +# and SGI_ACL_DEFAULT in the root attr namespace. >> +# >> +# Due to bugs here and there, we sometimes matched on partial >> +# strings with those names, and threw off xfs_repair. >> +# >> +#----------------------------------------------------------------------- >> +# Copyright (c) 2015 Red Hat, Inc. All Rights Reserved. >> +# >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation. >> +# >> +# This program is distributed in the hope that it would be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write the Free Software Foundation, >> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >> +#----------------------------------------------------------------------- >> +# >> + >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> + >> +here=`pwd` >> +tmp=/tmp/$$ >> +status=1 # failure is the default! > > I haven't run the test yet, but I don't see the trap and cleanup > function, is that on purpose? > >> + >> +# get standard environment, filters and checks >> +. ./common/rc >> +. ./common/filter > > . ./common/attr and _require_attrs ? > >> + >> +# real QA test starts here >> + >> +_supported_fs xfs >> +_supported_os IRIX Linux >> +_require_scratch >> + >> +rm -f $seqres.full > > Seems this file is not used and the rm can be omitted. > >> + >> +_scratch_mount > > Should _scratch_mkfs first > >> + >> +# Create root namespace attr names which are substrings or superstrings >> +# of the reserved ACL names, and make sure xfs_repair copes. >> + >> +# Due to various bugs, either the compared length was shorter >> +# than the reserved name (7 chars), so substrings matched, and/or only >> +# the reserved name length was compared, so superstrings matched. >> + >> +rm -f $SCRATCH_MNT/$seq.* > > If it's fresh fs, this seems unnecessary. > >> + >> +# actual reserved names: >> +# SGI_ACL_FILE SGI_ACL_DEFAULT \ >> +for NAME in SGI_ACL \ >> + SGI_ACL_F SGI_ACL_D \ >> + SGI_ACL_FILE_FOO SGI_ACL_DEFAULT_FOO; do >> + touch $SCRATCH_MNT/${seq}.${NAME} >> + attr -R -s $NAME -V "Wow, such $NAME" $SCRATCH_MNT/${seq}.${NAME} \ >> + | _filter_scratch > > $ATTR_PROG > > Thanks, > Eryu > >> +done >> + >> +# Older repair failed because it sees the above names as matching >> +# SGI_ACL_FILE / SGI_ACL_DEFAULT but w/o valid acls on them >> + >> +# The test harness will catch this (false positive) corruption >> + >> +# success, all done >> +status=0 >> +exit >> diff --git a/tests/xfs/053.out b/tests/xfs/053.out >> new file mode 100644 >> index 0000000..d876555 >> --- /dev/null >> +++ b/tests/xfs/053.out >> @@ -0,0 +1,11 @@ >> +QA output created by 053 >> +Attribute "SGI_ACL" set to a 17 byte value for SCRATCH_MNT/053.SGI_ACL: >> +Wow, such SGI_ACL >> +Attribute "SGI_ACL_F" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_F: >> +Wow, such SGI_ACL_F >> +Attribute "SGI_ACL_D" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_D: >> +Wow, such SGI_ACL_D >> +Attribute "SGI_ACL_FILE_FOO" set to a 26 byte value for SCRATCH_MNT/053.SGI_ACL_FILE_FOO: >> +Wow, such SGI_ACL_FILE_FOO >> +Attribute "SGI_ACL_DEFAULT_FOO" set to a 29 byte value for SCRATCH_MNT/053.SGI_ACL_DEFAULT_FOO: >> +Wow, such SGI_ACL_DEFAULT_FOO >> diff --git a/tests/xfs/group b/tests/xfs/group >> index 58144d2..26dd881 100644 >> --- a/tests/xfs/group >> +++ b/tests/xfs/group >> @@ -50,6 +50,7 @@ >> 050 quota auto quick >> 051 auto log metadata >> 052 quota db auto quick >> +053 acl auto >> 054 quota auto quick >> 055 dump ioctl remote tape >> 056 dump ioctl auto quick >> >> -- >> To unsubscribe from this list: send the line "unsubscribe fstests" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, May 14, 2015 at 12:23:14AM -0500, Eric Sandeen wrote: > All good advice; sigh, I am rusty! Thanks, will resend with fixes. > > (Started as using test dev so left some things out; not sure I need a trap if there is nothing to clean up? Also do we need to require attr on xfs? Can't remember if we can compile that out, but I guess it's harmless to include it) I did a "grep _require_attrs tests/xfs/*" and result showed several tests in xfs require attrs. At least it checks if ATTR_PROG exists :) And I think we need a trap and cleanup even if there's no obvious things to clean, some functions use $tmp.xxx internally, a cleanup could remove all these tmp files too, and trap plays with exit status, so it's still needed. Thanks, Eryu > > Thanks, > -Eric > > > On May 13, 2015, at 11:55 PM, Eryu Guan <eguan@redhat.com> wrote: > > > >> On Wed, May 13, 2015 at 10:22:18PM -0500, Eric Sandeen wrote: > >> xfs_repair compares attr names in the root namespace to > >> two special/reserved names, "SGI_ACL_FILE" and "SGI_ACL_DEFAULT" > >> and if the value in them aren't valid acls, flags this as > >> an inconsistency. > >> > >> However, due to various bugs, xfs_repair may only compare > >> a smaller portion of the on-disk value; hence either > >> substrings or superstrings may match, and false-positive > >> corruption will be detected. This test checks for those > >> false positives; i.e. the ACL names created in this test > >> may cause xfs_repair to "fix" them, but it should not. > >> > >> Signed-off-by: Eric Sandeen <sandeen@redhat.com> > >> --- > >> > >> patch for xfs_repair will be sent shortly > >> > >> diff --git a/tests/xfs/053 b/tests/xfs/053 > >> new file mode 100755 > >> index 0000000..284c014 > >> --- /dev/null > >> +++ b/tests/xfs/053 > >> @@ -0,0 +1,76 @@ > >> +#! /bin/bash > >> +# FS QA Test 053 > >> +# > >> +# Ensure that xfs_repair can properly spot SGI_ACL_FILE > >> +# and SGI_ACL_DEFAULT in the root attr namespace. > >> +# > >> +# Due to bugs here and there, we sometimes matched on partial > >> +# strings with those names, and threw off xfs_repair. > >> +# > >> +#----------------------------------------------------------------------- > >> +# Copyright (c) 2015 Red Hat, Inc. All Rights Reserved. > >> +# > >> +# This program is free software; you can redistribute it and/or > >> +# modify it under the terms of the GNU General Public License as > >> +# published by the Free Software Foundation. > >> +# > >> +# This program is distributed in the hope that it would be useful, > >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of > >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > >> +# GNU General Public License for more details. > >> +# > >> +# You should have received a copy of the GNU General Public License > >> +# along with this program; if not, write the Free Software Foundation, > >> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > >> +#----------------------------------------------------------------------- > >> +# > >> + > >> +seq=`basename $0` > >> +seqres=$RESULT_DIR/$seq > >> +echo "QA output created by $seq" > >> + > >> +here=`pwd` > >> +tmp=/tmp/$$ > >> +status=1 # failure is the default! > > > > I haven't run the test yet, but I don't see the trap and cleanup > > function, is that on purpose? > > > >> + > >> +# get standard environment, filters and checks > >> +. ./common/rc > >> +. ./common/filter > > > > . ./common/attr and _require_attrs ? > > > >> + > >> +# real QA test starts here > >> + > >> +_supported_fs xfs > >> +_supported_os IRIX Linux > >> +_require_scratch > >> + > >> +rm -f $seqres.full > > > > Seems this file is not used and the rm can be omitted. > > > >> + > >> +_scratch_mount > > > > Should _scratch_mkfs first > > > >> + > >> +# Create root namespace attr names which are substrings or superstrings > >> +# of the reserved ACL names, and make sure xfs_repair copes. > >> + > >> +# Due to various bugs, either the compared length was shorter > >> +# than the reserved name (7 chars), so substrings matched, and/or only > >> +# the reserved name length was compared, so superstrings matched. > >> + > >> +rm -f $SCRATCH_MNT/$seq.* > > > > If it's fresh fs, this seems unnecessary. > > > >> + > >> +# actual reserved names: > >> +# SGI_ACL_FILE SGI_ACL_DEFAULT \ > >> +for NAME in SGI_ACL \ > >> + SGI_ACL_F SGI_ACL_D \ > >> + SGI_ACL_FILE_FOO SGI_ACL_DEFAULT_FOO; do > >> + touch $SCRATCH_MNT/${seq}.${NAME} > >> + attr -R -s $NAME -V "Wow, such $NAME" $SCRATCH_MNT/${seq}.${NAME} \ > >> + | _filter_scratch > > > > $ATTR_PROG > > > > Thanks, > > Eryu > > > >> +done > >> + > >> +# Older repair failed because it sees the above names as matching > >> +# SGI_ACL_FILE / SGI_ACL_DEFAULT but w/o valid acls on them > >> + > >> +# The test harness will catch this (false positive) corruption > >> + > >> +# success, all done > >> +status=0 > >> +exit > >> diff --git a/tests/xfs/053.out b/tests/xfs/053.out > >> new file mode 100644 > >> index 0000000..d876555 > >> --- /dev/null > >> +++ b/tests/xfs/053.out > >> @@ -0,0 +1,11 @@ > >> +QA output created by 053 > >> +Attribute "SGI_ACL" set to a 17 byte value for SCRATCH_MNT/053.SGI_ACL: > >> +Wow, such SGI_ACL > >> +Attribute "SGI_ACL_F" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_F: > >> +Wow, such SGI_ACL_F > >> +Attribute "SGI_ACL_D" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_D: > >> +Wow, such SGI_ACL_D > >> +Attribute "SGI_ACL_FILE_FOO" set to a 26 byte value for SCRATCH_MNT/053.SGI_ACL_FILE_FOO: > >> +Wow, such SGI_ACL_FILE_FOO > >> +Attribute "SGI_ACL_DEFAULT_FOO" set to a 29 byte value for SCRATCH_MNT/053.SGI_ACL_DEFAULT_FOO: > >> +Wow, such SGI_ACL_DEFAULT_FOO > >> diff --git a/tests/xfs/group b/tests/xfs/group > >> index 58144d2..26dd881 100644 > >> --- a/tests/xfs/group > >> +++ b/tests/xfs/group > >> @@ -50,6 +50,7 @@ > >> 050 quota auto quick > >> 051 auto log metadata > >> 052 quota db auto quick > >> +053 acl auto > >> 054 quota auto quick > >> 055 dump ioctl remote tape > >> 056 dump ioctl auto quick > >> > >> -- > >> To unsubscribe from this list: send the line "unsubscribe fstests" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > > To unsubscribe from this list: send the line "unsubscribe fstests" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 5/14/15 12:44 AM, Eryu Guan wrote: > On Thu, May 14, 2015 at 12:23:14AM -0500, Eric Sandeen wrote: >> All good advice; sigh, I am rusty! Thanks, will resend with fixes. >> >> (Started as using test dev so left some things out; not sure I need a trap if there is nothing to clean up? Also do we need to require attr on xfs? Can't remember if we can compile that out, but I guess it's harmless to include it) > > I did a "grep _require_attrs tests/xfs/*" and result showed several > tests in xfs require attrs. At least it checks if ATTR_PROG exists :) Yes, I forgot about that ;( > And I think we need a trap and cleanup even if there's no obvious things > to clean, some functions use $tmp.xxx internally, a cleanup could remove > all these tmp files too, and trap plays with exit status, so it's still > needed. Fair enough, thanks for the review. -Eric -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/xfs/053 b/tests/xfs/053 new file mode 100755 index 0000000..284c014 --- /dev/null +++ b/tests/xfs/053 @@ -0,0 +1,76 @@ +#! /bin/bash +# FS QA Test 053 +# +# Ensure that xfs_repair can properly spot SGI_ACL_FILE +# and SGI_ACL_DEFAULT in the root attr namespace. +# +# Due to bugs here and there, we sometimes matched on partial +# strings with those names, and threw off xfs_repair. +# +#----------------------------------------------------------------------- +# Copyright (c) 2015 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here + +_supported_fs xfs +_supported_os IRIX Linux +_require_scratch + +rm -f $seqres.full + +_scratch_mount + +# Create root namespace attr names which are substrings or superstrings +# of the reserved ACL names, and make sure xfs_repair copes. + +# Due to various bugs, either the compared length was shorter +# than the reserved name (7 chars), so substrings matched, and/or only +# the reserved name length was compared, so superstrings matched. + +rm -f $SCRATCH_MNT/$seq.* + +# actual reserved names: +# SGI_ACL_FILE SGI_ACL_DEFAULT \ +for NAME in SGI_ACL \ + SGI_ACL_F SGI_ACL_D \ + SGI_ACL_FILE_FOO SGI_ACL_DEFAULT_FOO; do + touch $SCRATCH_MNT/${seq}.${NAME} + attr -R -s $NAME -V "Wow, such $NAME" $SCRATCH_MNT/${seq}.${NAME} \ + | _filter_scratch +done + +# Older repair failed because it sees the above names as matching +# SGI_ACL_FILE / SGI_ACL_DEFAULT but w/o valid acls on them + +# The test harness will catch this (false positive) corruption + +# success, all done +status=0 +exit diff --git a/tests/xfs/053.out b/tests/xfs/053.out new file mode 100644 index 0000000..d876555 --- /dev/null +++ b/tests/xfs/053.out @@ -0,0 +1,11 @@ +QA output created by 053 +Attribute "SGI_ACL" set to a 17 byte value for SCRATCH_MNT/053.SGI_ACL: +Wow, such SGI_ACL +Attribute "SGI_ACL_F" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_F: +Wow, such SGI_ACL_F +Attribute "SGI_ACL_D" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_D: +Wow, such SGI_ACL_D +Attribute "SGI_ACL_FILE_FOO" set to a 26 byte value for SCRATCH_MNT/053.SGI_ACL_FILE_FOO: +Wow, such SGI_ACL_FILE_FOO +Attribute "SGI_ACL_DEFAULT_FOO" set to a 29 byte value for SCRATCH_MNT/053.SGI_ACL_DEFAULT_FOO: +Wow, such SGI_ACL_DEFAULT_FOO diff --git a/tests/xfs/group b/tests/xfs/group index 58144d2..26dd881 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -50,6 +50,7 @@ 050 quota auto quick 051 auto log metadata 052 quota db auto quick +053 acl auto 054 quota auto quick 055 dump ioctl remote tape 056 dump ioctl auto quick
xfs_repair compares attr names in the root namespace to two special/reserved names, "SGI_ACL_FILE" and "SGI_ACL_DEFAULT" and if the value in them aren't valid acls, flags this as an inconsistency. However, due to various bugs, xfs_repair may only compare a smaller portion of the on-disk value; hence either substrings or superstrings may match, and false-positive corruption will be detected. This test checks for those false positives; i.e. the ACL names created in this test may cause xfs_repair to "fix" them, but it should not. Signed-off-by: Eric Sandeen <sandeen@redhat.com> --- patch for xfs_repair will be sent shortly -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html