| Message ID | 1431878106-30579-8-git-send-email-ygardi@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
2015-05-18 0:55 GMT+09:00 Yaniv Gardi <ygardi@codeaurora.org>: > Some UFS host controllers may only allow accessing the peer DME attribute > in AUTO mode (FAST AUTO or SLOW AUTO) hence we had added a quirk for > switching to AUTO power mode before accessing the peer DME attribute. > > Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> > > --- > drivers/scsi/ufs/ufshcd.c | 31 +++++++++++++++++++++++++++++++ > drivers/scsi/ufs/ufshcd.h | 7 +++++++ > 2 files changed, 38 insertions(+) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index a274df9..014f1c0 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -188,6 +188,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); > static irqreturn_t ufshcd_intr(int irq, void *__hba); > static int ufshcd_config_pwr_mode(struct ufs_hba *hba, > struct ufs_pa_layer_attr *desired_pwr_mode); > +static int ufshcd_change_power_mode(struct ufs_hba *hba, > + struct ufs_pa_layer_attr *pwr_mode); > > static inline int ufshcd_enable_irq(struct ufs_hba *hba) > { > @@ -2156,6 +2158,31 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, > }; > const char *get = action[!!peer]; > int ret; > + struct ufs_pa_layer_attr orig_pwr_info; > + struct ufs_pa_layer_attr temp_pwr_info; > + bool pwr_mode_change = false; > + > + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) { > + orig_pwr_info = hba->pwr_info; > + temp_pwr_info = orig_pwr_info; > + > + if (orig_pwr_info.pwr_tx == FAST_MODE || > + orig_pwr_info.pwr_rx == FAST_MODE) { > + temp_pwr_info.pwr_tx = FASTAUTO_MODE; > + temp_pwr_info.pwr_rx = FASTAUTO_MODE; > + pwr_mode_change = true; > + } else if (orig_pwr_info.pwr_tx == SLOW_MODE || > + orig_pwr_info.pwr_rx == SLOW_MODE) { > + temp_pwr_info.pwr_tx = SLOWAUTO_MODE; > + temp_pwr_info.pwr_rx = SLOWAUTO_MODE; > + pwr_mode_change = true; > + } What happens if tx and rx have different power mode (although it is strange setting) ? For example, if the current power mode is pwr_tx=FAST_MODE, gear_tx=3 and pwr_rx=SLOW_MODE, gear_rx=4, the temporary power mode will be pwr_tx=FASTAUTO_MODE, gear_tx=3 and pwr_rx=FASTAUTO_MODE, gear_rx=4. But HS-G4 is invalid. > + if (pwr_mode_change) { > + ret = ufshcd_change_power_mode(hba, &temp_pwr_info); > + if (ret) > + goto out; > + } > + } -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2015-05-18 0:55 GMT+09:00 Yaniv Gardi <ygardi@codeaurora.org>: > Some UFS host controllers may only allow accessing the peer DME attribute > in AUTO mode (FAST AUTO or SLOW AUTO) hence we had added a quirk for > switching to AUTO power mode before accessing the peer DME attribute. > > Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> > > --- > drivers/scsi/ufs/ufshcd.c | 31 +++++++++++++++++++++++++++++++ > drivers/scsi/ufs/ufshcd.h | 7 +++++++ > 2 files changed, 38 insertions(+) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index a274df9..014f1c0 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -188,6 +188,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); > static irqreturn_t ufshcd_intr(int irq, void *__hba); > static int ufshcd_config_pwr_mode(struct ufs_hba *hba, > struct ufs_pa_layer_attr *desired_pwr_mode); > +static int ufshcd_change_power_mode(struct ufs_hba *hba, > + struct ufs_pa_layer_attr *pwr_mode); > > static inline int ufshcd_enable_irq(struct ufs_hba *hba) > { > @@ -2156,6 +2158,31 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, > }; > const char *get = action[!!peer]; > int ret; > + struct ufs_pa_layer_attr orig_pwr_info; > + struct ufs_pa_layer_attr temp_pwr_info; > + bool pwr_mode_change = false; > + > + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) { > + orig_pwr_info = hba->pwr_info; > + temp_pwr_info = orig_pwr_info; > + > + if (orig_pwr_info.pwr_tx == FAST_MODE || > + orig_pwr_info.pwr_rx == FAST_MODE) { > + temp_pwr_info.pwr_tx = FASTAUTO_MODE; > + temp_pwr_info.pwr_rx = FASTAUTO_MODE; > + pwr_mode_change = true; > + } else if (orig_pwr_info.pwr_tx == SLOW_MODE || > + orig_pwr_info.pwr_rx == SLOW_MODE) { > + temp_pwr_info.pwr_tx = SLOWAUTO_MODE; > + temp_pwr_info.pwr_rx = SLOWAUTO_MODE; > + pwr_mode_change = true; > + } > + if (pwr_mode_change) { > + ret = ufshcd_change_power_mode(hba, &temp_pwr_info); I'm a bit worried that this could cause an infinite recursion if someone adds ufshcd_dme_peer_get() in ufshcd_change_power_mode() for debugging or investigation. So isn't it better to add note in code comment, or detect infinite recursion? -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index a274df9..014f1c0 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -188,6 +188,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); static irqreturn_t ufshcd_intr(int irq, void *__hba); static int ufshcd_config_pwr_mode(struct ufs_hba *hba, struct ufs_pa_layer_attr *desired_pwr_mode); +static int ufshcd_change_power_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *pwr_mode); static inline int ufshcd_enable_irq(struct ufs_hba *hba) { @@ -2156,6 +2158,31 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, }; const char *get = action[!!peer]; int ret; + struct ufs_pa_layer_attr orig_pwr_info; + struct ufs_pa_layer_attr temp_pwr_info; + bool pwr_mode_change = false; + + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) { + orig_pwr_info = hba->pwr_info; + temp_pwr_info = orig_pwr_info; + + if (orig_pwr_info.pwr_tx == FAST_MODE || + orig_pwr_info.pwr_rx == FAST_MODE) { + temp_pwr_info.pwr_tx = FASTAUTO_MODE; + temp_pwr_info.pwr_rx = FASTAUTO_MODE; + pwr_mode_change = true; + } else if (orig_pwr_info.pwr_tx == SLOW_MODE || + orig_pwr_info.pwr_rx == SLOW_MODE) { + temp_pwr_info.pwr_tx = SLOWAUTO_MODE; + temp_pwr_info.pwr_rx = SLOWAUTO_MODE; + pwr_mode_change = true; + } + if (pwr_mode_change) { + ret = ufshcd_change_power_mode(hba, &temp_pwr_info); + if (ret) + goto out; + } + } uic_cmd.command = peer ? UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET; @@ -2170,6 +2197,10 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, if (mib_val) *mib_val = uic_cmd.argument3; + + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE) + && pwr_mode_change) + ufshcd_change_power_mode(hba, &orig_pwr_info); out: return ret; } diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 8636ec9..eb6831d 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -442,6 +442,13 @@ struct ufs_hba { */ #define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP UFS_BIT(3) + /* + * This quirk needs to be enabled if the host contoller only allows + * accessing the peer dme attributes in AUTO mode (FAST AUTO or + * SLOW AUTO). + */ + #define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE UFS_BIT(4) + unsigned int quirks; /* Deviations from standard UFSHCI spec. */ wait_queue_head_t tm_wq;
Some UFS host controllers may only allow accessing the peer DME attribute in AUTO mode (FAST AUTO or SLOW AUTO) hence we had added a quirk for switching to AUTO power mode before accessing the peer DME attribute. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> --- drivers/scsi/ufs/ufshcd.c | 31 +++++++++++++++++++++++++++++++ drivers/scsi/ufs/ufshcd.h | 7 +++++++ 2 files changed, 38 insertions(+)