diff mbox

ARM: dts: odroidxu3: Enable wake alarm of S2MPS11 RTC

Message ID 1432554253-25886-1-git-send-email-k.kozlowski.k@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Kozlowski May 25, 2015, 11:44 a.m. UTC
The IRQB of S2MPS11 PMIC is wired to XEINT4 (GPX0-4) through pull-up
resistor.

Add interrupt properties and pinctrl configuration to enable RTC wake
alarm of rtc-s5m driver. This also removes a warning:
sec_pmic 4-0066: No interrupt specified, no interrupts

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 arch/arm/boot/dts/exynos5422-odroidxu3.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Javier Martinez Canillas May 25, 2015, 12:27 p.m. UTC | #1
Hello Krzysztof,

On 05/25/2015 01:44 PM, Krzysztof Kozlowski wrote:
> The IRQB of S2MPS11 PMIC is wired to XEINT4 (GPX0-4) through pull-up
> resistor.
> 
> Add interrupt properties and pinctrl configuration to enable RTC wake
> alarm of rtc-s5m driver. This also removes a warning:
> sec_pmic 4-0066: No interrupt specified, no interrupts
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
> ---

I haven't checked with the board schematics but the patch
looks good to me.

Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index c16987950aa1..27014bb0c586 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -12,6 +12,7 @@ 
 
 /dts-v1/;
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
@@ -153,6 +154,11 @@ 
 		s2mps11,buck3-ramp-enable = <1>;
 		s2mps11,buck4-ramp-enable = <1>;
 
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
 		s2mps11_osc: clocks {
 			#clock-cells = <1>;
 			clock-output-names = "s2mps11_ap",
@@ -473,6 +479,13 @@ 
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	s2mps11_irq: s2mps11-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
 };
 
 &pwm {