| Message ID | 1432627211-4338-2-git-send-email-josh.wu@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Josh, Thank you for the patch. On Tuesday 26 May 2015 16:00:09 Josh Wu wrote: > The runtime pm resume/suspend will enable/disable pclk (ISI peripheral > clock). > And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need > access ISI registers. In atmel_isi_probe(), remove the isi disable code > as in the moment ISI peripheral clock is not enable yet. > > In the meantime, as clock_start()/clock_stop() is used to control the > mclk not ISI peripheral clock. So move this to start[stop]_streaming() > function. > > Signed-off-by: Josh Wu <josh.wu@atmel.com> > --- > > Changes in v4: > - need to call pm_runtime_disable() in atmel_isi_remove(). > - merged the patch which remove isi disable code in atmel_isi_probe() as > isi peripherial clock is not enabled in this moment. > - refine the commit log > > Changes in v3: None > Changes in v2: > - merged v1 two patch into one. > - use runtime_pm_put() instead of runtime_pm_put_sync() > - enable peripheral clock before access ISI registers. > > drivers/media/platform/soc_camera/atmel-isi.c | 54 ++++++++++++++++++++---- > 1 file changed, 46 insertions(+), 8 deletions(-) > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 > 100644 > --- a/drivers/media/platform/soc_camera/atmel-isi.c > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > @@ -20,6 +20,7 @@ > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > #include <linux/slab.h> > > #include <media/atmel-isi.h> > @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, > unsigned int count) struct atmel_isi *isi = ici->priv; > int ret; > > + pm_runtime_get_sync(ici->v4l2_dev.dev); > + > /* Reset ISI */ > ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); > if (ret < 0) { You need to call pm_runtime_put() in the error path, otherwise an atmel_isi_wait_status() failure will keep the device enabled. > @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) > ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); > if (ret < 0) > dev_err(icd->parent, "Disable ISI timed out\n"); > + > + pm_runtime_put(ici->v4l2_dev.dev); > } > > static struct vb2_ops isi_video_qops = { > @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device > *icd, if (mf->code != xlate->code) > return -EINVAL; > > + /* Enable PM and peripheral clock before operate isi registers */ > + pm_runtime_get_sync(ici->v4l2_dev.dev); > + > ret = configure_geometry(isi, pix->width, pix->height, xlate->code); > + > + pm_runtime_put(ici->v4l2_dev.dev); I think it would simplify the code to move the configure_geometry() call to start_streaming() as you already call pm_runtime_get_sync() there. That can be done in a separate patch though. > + > if (ret < 0) > return ret; > > @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct > soc_camera_host *ici) struct atmel_isi *isi = ici->priv; > int ret; > > - ret = clk_prepare_enable(isi->pclk); > - if (ret) > - return ret; > - > if (!IS_ERR(isi->mck)) { > ret = clk_prepare_enable(isi->mck); > if (ret) { > - clk_disable_unprepare(isi->pclk); > return ret; > } > } > @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host > *ici) > > if (!IS_ERR(isi->mck)) > clk_disable_unprepare(isi->mck); > - clk_disable_unprepare(isi->pclk); > } > > static unsigned int isi_camera_poll(struct file *file, poll_table *pt) > @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct > soc_camera_device *icd) > > cfg1 |= ISI_CFG1_THMASK_BEATS_16; > > + /* Enable PM and peripheral clock before operate isi registers */ > + pm_runtime_get_sync(ici->v4l2_dev.dev); > + > isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); > isi_writel(isi, ISI_CFG1, cfg1); > > + pm_runtime_put(ici->v4l2_dev.dev); > + > return 0; > } > > @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device > *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, > isi->p_fb_descriptors, > isi->fb_descriptors_phys); > + pm_runtime_disable(&pdev->dev); > > return 0; > } > @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device > *pdev) if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10) > isi->width_flags |= 1 << 9; > > - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); > - > irq = platform_get_irq(pdev, 0); > if (IS_ERR_VALUE(irq)) { > ret = irq; > @@ -1049,6 +1058,9 @@ static int atmel_isi_probe(struct platform_device > *pdev) soc_host->v4l2_dev.dev = &pdev->dev; > soc_host->nr = pdev->id; > > + pm_suspend_ignore_children(&pdev->dev, true); > + pm_runtime_enable(&pdev->dev); > + > if (isi->pdata.asd_sizes) { > soc_host->asd = isi->pdata.asd; > soc_host->asd_sizes = isi->pdata.asd_sizes; > @@ -1062,6 +1074,7 @@ static int atmel_isi_probe(struct platform_device > *pdev) return 0; > > err_register_soc_camera_host: > + pm_runtime_disable(&pdev->dev); > err_req_irq: > err_ioremap: > vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); > @@ -1074,6 +1087,30 @@ err_alloc_ctx: > return ret; > } > > +static int atmel_isi_runtime_suspend(struct device *dev) > +{ > + struct soc_camera_host *soc_host = to_soc_camera_host(dev); > + struct atmel_isi *isi = container_of(soc_host, > + struct atmel_isi, soc_host); > + > + clk_disable_unprepare(isi->pclk); > + > + return 0; > +} > +static int atmel_isi_runtime_resume(struct device *dev) > +{ > + struct soc_camera_host *soc_host = to_soc_camera_host(dev); > + struct atmel_isi *isi = container_of(soc_host, > + struct atmel_isi, soc_host); > + > + return clk_prepare_enable(isi->pclk); > +} > + > +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { > + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, > + atmel_isi_runtime_resume, NULL) > +}; > + > static const struct of_device_id atmel_isi_of_match[] = { > { .compatible = "atmel,at91sam9g45-isi" }, > { } > @@ -1085,6 +1122,7 @@ static struct platform_driver atmel_isi_driver = { > .driver = { > .name = "atmel_isi", > .of_match_table = of_match_ptr(atmel_isi_of_match), > + .pm = &atmel_isi_dev_pm_ops, > }, > };
Hi, Laurent On 5/26/2015 4:16 PM, Laurent Pinchart wrote: > Hi Josh, > > Thank you for the patch. > > On Tuesday 26 May 2015 16:00:09 Josh Wu wrote: >> The runtime pm resume/suspend will enable/disable pclk (ISI peripheral >> clock). >> And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need >> access ISI registers. In atmel_isi_probe(), remove the isi disable code >> as in the moment ISI peripheral clock is not enable yet. >> >> In the meantime, as clock_start()/clock_stop() is used to control the >> mclk not ISI peripheral clock. So move this to start[stop]_streaming() >> function. >> >> Signed-off-by: Josh Wu <josh.wu@atmel.com> >> --- >> >> Changes in v4: >> - need to call pm_runtime_disable() in atmel_isi_remove(). >> - merged the patch which remove isi disable code in atmel_isi_probe() as >> isi peripherial clock is not enabled in this moment. >> - refine the commit log >> >> Changes in v3: None >> Changes in v2: >> - merged v1 two patch into one. >> - use runtime_pm_put() instead of runtime_pm_put_sync() >> - enable peripheral clock before access ISI registers. >> >> drivers/media/platform/soc_camera/atmel-isi.c | 54 ++++++++++++++++++++---- >> 1 file changed, 46 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c >> b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 >> 100644 >> --- a/drivers/media/platform/soc_camera/atmel-isi.c >> +++ b/drivers/media/platform/soc_camera/atmel-isi.c >> @@ -20,6 +20,7 @@ >> #include <linux/kernel.h> >> #include <linux/module.h> >> #include <linux/platform_device.h> >> +#include <linux/pm_runtime.h> >> #include <linux/slab.h> >> >> #include <media/atmel-isi.h> >> @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, >> unsigned int count) struct atmel_isi *isi = ici->priv; >> int ret; >> >> + pm_runtime_get_sync(ici->v4l2_dev.dev); >> + >> /* Reset ISI */ >> ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); >> if (ret < 0) { > You need to call pm_runtime_put() in the error path, otherwise an > atmel_isi_wait_status() failure will keep the device enabled. Nice catch. Thanks. > >> @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) >> ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); >> if (ret < 0) >> dev_err(icd->parent, "Disable ISI timed out\n"); >> + >> + pm_runtime_put(ici->v4l2_dev.dev); >> } >> >> static struct vb2_ops isi_video_qops = { >> @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device >> *icd, if (mf->code != xlate->code) >> return -EINVAL; >> >> + /* Enable PM and peripheral clock before operate isi registers */ >> + pm_runtime_get_sync(ici->v4l2_dev.dev); >> + >> ret = configure_geometry(isi, pix->width, pix->height, xlate->code); >> + >> + pm_runtime_put(ici->v4l2_dev.dev); > I think it would simplify the code to move the configure_geometry() call to > start_streaming() as you already call pm_runtime_get_sync() there. That can be > done in a separate patch though. I think it's a good idea. I would like to make this in a separate patch and not include in this series. In summary, I'll resend this patch just with the fix you mentioned in above (fix the error path in start_streaming). Is that okay for you? Best Regards, Josh Wu > >> + >> if (ret < 0) >> return ret; >> >> @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct >> soc_camera_host *ici) struct atmel_isi *isi = ici->priv; >> int ret; >> >> - ret = clk_prepare_enable(isi->pclk); >> - if (ret) >> - return ret; >> - >> if (!IS_ERR(isi->mck)) { >> ret = clk_prepare_enable(isi->mck); >> if (ret) { >> - clk_disable_unprepare(isi->pclk); >> return ret; >> } >> } >> @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host >> *ici) >> >> if (!IS_ERR(isi->mck)) >> clk_disable_unprepare(isi->mck); >> - clk_disable_unprepare(isi->pclk); >> } >> >> static unsigned int isi_camera_poll(struct file *file, poll_table *pt) >> @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct >> soc_camera_device *icd) >> >> cfg1 |= ISI_CFG1_THMASK_BEATS_16; >> >> + /* Enable PM and peripheral clock before operate isi registers */ >> + pm_runtime_get_sync(ici->v4l2_dev.dev); >> + >> isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); >> isi_writel(isi, ISI_CFG1, cfg1); >> >> + pm_runtime_put(ici->v4l2_dev.dev); >> + >> return 0; >> } >> >> @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device >> *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, >> isi->p_fb_descriptors, >> isi->fb_descriptors_phys); >> + pm_runtime_disable(&pdev->dev); >> >> return 0; >> } >> @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device >> *pdev) if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10) >> isi->width_flags |= 1 << 9; >> >> - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); >> - >> irq = platform_get_irq(pdev, 0); >> if (IS_ERR_VALUE(irq)) { >> ret = irq; >> @@ -1049,6 +1058,9 @@ static int atmel_isi_probe(struct platform_device >> *pdev) soc_host->v4l2_dev.dev = &pdev->dev; >> soc_host->nr = pdev->id; >> >> + pm_suspend_ignore_children(&pdev->dev, true); >> + pm_runtime_enable(&pdev->dev); >> + >> if (isi->pdata.asd_sizes) { >> soc_host->asd = isi->pdata.asd; >> soc_host->asd_sizes = isi->pdata.asd_sizes; >> @@ -1062,6 +1074,7 @@ static int atmel_isi_probe(struct platform_device >> *pdev) return 0; >> >> err_register_soc_camera_host: >> + pm_runtime_disable(&pdev->dev); >> err_req_irq: >> err_ioremap: >> vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); >> @@ -1074,6 +1087,30 @@ err_alloc_ctx: >> return ret; >> } >> >> +static int atmel_isi_runtime_suspend(struct device *dev) >> +{ >> + struct soc_camera_host *soc_host = to_soc_camera_host(dev); >> + struct atmel_isi *isi = container_of(soc_host, >> + struct atmel_isi, soc_host); >> + >> + clk_disable_unprepare(isi->pclk); >> + >> + return 0; >> +} >> +static int atmel_isi_runtime_resume(struct device *dev) >> +{ >> + struct soc_camera_host *soc_host = to_soc_camera_host(dev); >> + struct atmel_isi *isi = container_of(soc_host, >> + struct atmel_isi, soc_host); >> + >> + return clk_prepare_enable(isi->pclk); >> +} >> + >> +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { >> + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, >> + atmel_isi_runtime_resume, NULL) >> +}; >> + >> static const struct of_device_id atmel_isi_of_match[] = { >> { .compatible = "atmel,at91sam9g45-isi" }, >> { } >> @@ -1085,6 +1122,7 @@ static struct platform_driver atmel_isi_driver = { >> .driver = { >> .name = "atmel_isi", >> .of_match_table = of_match_ptr(atmel_isi_of_match), >> + .pm = &atmel_isi_dev_pm_ops, >> }, >> }; -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 5/26/2015 5:14 PM, Josh Wu wrote: > Hi, Laurent > > On 5/26/2015 4:16 PM, Laurent Pinchart wrote: >> Hi Josh, >> >> Thank you for the patch. >> >> On Tuesday 26 May 2015 16:00:09 Josh Wu wrote: >>> The runtime pm resume/suspend will enable/disable pclk (ISI peripheral >>> clock). >>> And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need >>> access ISI registers. In atmel_isi_probe(), remove the isi disable code >>> as in the moment ISI peripheral clock is not enable yet. >>> >>> In the meantime, as clock_start()/clock_stop() is used to control the >>> mclk not ISI peripheral clock. So move this to start[stop]_streaming() >>> function. >>> >>> Signed-off-by: Josh Wu <josh.wu@atmel.com> >>> --- >>> >>> Changes in v4: >>> - need to call pm_runtime_disable() in atmel_isi_remove(). >>> - merged the patch which remove isi disable code in >>> atmel_isi_probe() as >>> isi peripherial clock is not enabled in this moment. >>> - refine the commit log >>> >>> Changes in v3: None >>> Changes in v2: >>> - merged v1 two patch into one. >>> - use runtime_pm_put() instead of runtime_pm_put_sync() >>> - enable peripheral clock before access ISI registers. >>> >>> drivers/media/platform/soc_camera/atmel-isi.c | 54 >>> ++++++++++++++++++++---- >>> 1 file changed, 46 insertions(+), 8 deletions(-) >>> >>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c >>> b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 >>> 100644 >>> --- a/drivers/media/platform/soc_camera/atmel-isi.c >>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c >>> @@ -20,6 +20,7 @@ >>> #include <linux/kernel.h> >>> #include <linux/module.h> >>> #include <linux/platform_device.h> >>> +#include <linux/pm_runtime.h> >>> #include <linux/slab.h> >>> >>> #include <media/atmel-isi.h> >>> @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, >>> unsigned int count) struct atmel_isi *isi = ici->priv; >>> int ret; >>> >>> + pm_runtime_get_sync(ici->v4l2_dev.dev); >>> + >>> /* Reset ISI */ >>> ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); >>> if (ret < 0) { >> You need to call pm_runtime_put() in the error path, otherwise an >> atmel_isi_wait_status() failure will keep the device enabled. > > Nice catch. Thanks. > >> >>> @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) >>> ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); >>> if (ret < 0) >>> dev_err(icd->parent, "Disable ISI timed out\n"); >>> + >>> + pm_runtime_put(ici->v4l2_dev.dev); >>> } >>> >>> static struct vb2_ops isi_video_qops = { >>> @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct >>> soc_camera_device >>> *icd, if (mf->code != xlate->code) >>> return -EINVAL; >>> >>> + /* Enable PM and peripheral clock before operate isi registers */ >>> + pm_runtime_get_sync(ici->v4l2_dev.dev); >>> + >>> ret = configure_geometry(isi, pix->width, pix->height, >>> xlate->code); >>> + >>> + pm_runtime_put(ici->v4l2_dev.dev); >> I think it would simplify the code to move the configure_geometry() >> call to >> start_streaming() as you already call pm_runtime_get_sync() there. >> That can be >> done in a separate patch though. > > I think it's a good idea. I would like to make this in a separate > patch and not include in this series. > > In summary, I'll resend this patch just with the fix you mentioned in > above (fix the error path in start_streaming). > Is that okay for you? As I found another issue on stop_streaming(), so I sent a v5 series for this whole patch set with a new fix. Please check it. BTW: I don't include the simplify method: move configure_geometry() into start_streaming(), I perfer do that after this series is merged. Best Regards, Josh Wu > > Best Regards, > Josh Wu > >> >>> + >>> if (ret < 0) >>> return ret; >>> >>> @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct >>> soc_camera_host *ici) struct atmel_isi *isi = ici->priv; >>> int ret; >>> >>> - ret = clk_prepare_enable(isi->pclk); >>> - if (ret) >>> - return ret; >>> - >>> if (!IS_ERR(isi->mck)) { >>> ret = clk_prepare_enable(isi->mck); >>> if (ret) { >>> - clk_disable_unprepare(isi->pclk); >>> return ret; >>> } >>> } >>> @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct >>> soc_camera_host >>> *ici) >>> >>> if (!IS_ERR(isi->mck)) >>> clk_disable_unprepare(isi->mck); >>> - clk_disable_unprepare(isi->pclk); >>> } >>> >>> static unsigned int isi_camera_poll(struct file *file, poll_table >>> *pt) >>> @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct >>> soc_camera_device *icd) >>> >>> cfg1 |= ISI_CFG1_THMASK_BEATS_16; >>> >>> + /* Enable PM and peripheral clock before operate isi registers */ >>> + pm_runtime_get_sync(ici->v4l2_dev.dev); >>> + >>> isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); >>> isi_writel(isi, ISI_CFG1, cfg1); >>> >>> + pm_runtime_put(ici->v4l2_dev.dev); >>> + >>> return 0; >>> } >>> >>> @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device >>> *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, >>> isi->p_fb_descriptors, >>> isi->fb_descriptors_phys); >>> + pm_runtime_disable(&pdev->dev); >>> >>> return 0; >>> } >>> @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device >>> *pdev) if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10) >>> isi->width_flags |= 1 << 9; >>> >>> - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); >>> - >>> irq = platform_get_irq(pdev, 0); >>> if (IS_ERR_VALUE(irq)) { >>> ret = irq; >>> @@ -1049,6 +1058,9 @@ static int atmel_isi_probe(struct platform_device >>> *pdev) soc_host->v4l2_dev.dev = &pdev->dev; >>> soc_host->nr = pdev->id; >>> >>> + pm_suspend_ignore_children(&pdev->dev, true); >>> + pm_runtime_enable(&pdev->dev); >>> + >>> if (isi->pdata.asd_sizes) { >>> soc_host->asd = isi->pdata.asd; >>> soc_host->asd_sizes = isi->pdata.asd_sizes; >>> @@ -1062,6 +1074,7 @@ static int atmel_isi_probe(struct platform_device >>> *pdev) return 0; >>> >>> err_register_soc_camera_host: >>> + pm_runtime_disable(&pdev->dev); >>> err_req_irq: >>> err_ioremap: >>> vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); >>> @@ -1074,6 +1087,30 @@ err_alloc_ctx: >>> return ret; >>> } >>> >>> +static int atmel_isi_runtime_suspend(struct device *dev) >>> +{ >>> + struct soc_camera_host *soc_host = to_soc_camera_host(dev); >>> + struct atmel_isi *isi = container_of(soc_host, >>> + struct atmel_isi, soc_host); >>> + >>> + clk_disable_unprepare(isi->pclk); >>> + >>> + return 0; >>> +} >>> +static int atmel_isi_runtime_resume(struct device *dev) >>> +{ >>> + struct soc_camera_host *soc_host = to_soc_camera_host(dev); >>> + struct atmel_isi *isi = container_of(soc_host, >>> + struct atmel_isi, soc_host); >>> + >>> + return clk_prepare_enable(isi->pclk); >>> +} >>> + >>> +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { >>> + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, >>> + atmel_isi_runtime_resume, NULL) >>> +}; >>> + >>> static const struct of_device_id atmel_isi_of_match[] = { >>> { .compatible = "atmel,at91sam9g45-isi" }, >>> { } >>> @@ -1085,6 +1122,7 @@ static struct platform_driver atmel_isi_driver >>> = { >>> .driver = { >>> .name = "atmel_isi", >>> .of_match_table = of_match_ptr(atmel_isi_of_match), >>> + .pm = &atmel_isi_dev_pm_ops, >>> }, >>> }; > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <media/atmel-isi.h> @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct atmel_isi *isi = ici->priv; int ret; + pm_runtime_get_sync(ici->v4l2_dev.dev); + /* Reset ISI */ ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); if (ret < 0) { @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); if (ret < 0) dev_err(icd->parent, "Disable ISI timed out\n"); + + pm_runtime_put(ici->v4l2_dev.dev); } static struct vb2_ops isi_video_qops = { @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, if (mf->code != xlate->code) return -EINVAL; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici->v4l2_dev.dev); + ret = configure_geometry(isi, pix->width, pix->height, xlate->code); + + pm_runtime_put(ici->v4l2_dev.dev); + if (ret < 0) return ret; @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici) struct atmel_isi *isi = ici->priv; int ret; - ret = clk_prepare_enable(isi->pclk); - if (ret) - return ret; - if (!IS_ERR(isi->mck)) { ret = clk_prepare_enable(isi->mck); if (ret) { - clk_disable_unprepare(isi->pclk); return ret; } } @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici) if (!IS_ERR(isi->mck)) clk_disable_unprepare(isi->mck); - clk_disable_unprepare(isi->pclk); } static unsigned int isi_camera_poll(struct file *file, poll_table *pt) @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) cfg1 |= ISI_CFG1_THMASK_BEATS_16; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici->v4l2_dev.dev); + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); isi_writel(isi, ISI_CFG1, cfg1); + pm_runtime_put(ici->v4l2_dev.dev); + return 0; } @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, isi->p_fb_descriptors, isi->fb_descriptors_phys); + pm_runtime_disable(&pdev->dev); return 0; } @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device *pdev) if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10) isi->width_flags |= 1 << 9; - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - irq = platform_get_irq(pdev, 0); if (IS_ERR_VALUE(irq)) { ret = irq; @@ -1049,6 +1058,9 @@ static int atmel_isi_probe(struct platform_device *pdev) soc_host->v4l2_dev.dev = &pdev->dev; soc_host->nr = pdev->id; + pm_suspend_ignore_children(&pdev->dev, true); + pm_runtime_enable(&pdev->dev); + if (isi->pdata.asd_sizes) { soc_host->asd = isi->pdata.asd; soc_host->asd_sizes = isi->pdata.asd_sizes; @@ -1062,6 +1074,7 @@ static int atmel_isi_probe(struct platform_device *pdev) return 0; err_register_soc_camera_host: + pm_runtime_disable(&pdev->dev); err_req_irq: err_ioremap: vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); @@ -1074,6 +1087,30 @@ err_alloc_ctx: return ret; } +static int atmel_isi_runtime_suspend(struct device *dev) +{ + struct soc_camera_host *soc_host = to_soc_camera_host(dev); + struct atmel_isi *isi = container_of(soc_host, + struct atmel_isi, soc_host); + + clk_disable_unprepare(isi->pclk); + + return 0; +} +static int atmel_isi_runtime_resume(struct device *dev) +{ + struct soc_camera_host *soc_host = to_soc_camera_host(dev); + struct atmel_isi *isi = container_of(soc_host, + struct atmel_isi, soc_host); + + return clk_prepare_enable(isi->pclk); +} + +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, + atmel_isi_runtime_resume, NULL) +}; + static const struct of_device_id atmel_isi_of_match[] = { { .compatible = "atmel,at91sam9g45-isi" }, { } @@ -1085,6 +1122,7 @@ static struct platform_driver atmel_isi_driver = { .driver = { .name = "atmel_isi", .of_match_table = of_match_ptr(atmel_isi_of_match), + .pm = &atmel_isi_dev_pm_ops, }, };
The runtime pm resume/suspend will enable/disable pclk (ISI peripheral clock). And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need access ISI registers. In atmel_isi_probe(), remove the isi disable code as in the moment ISI peripheral clock is not enable yet. In the meantime, as clock_start()/clock_stop() is used to control the mclk not ISI peripheral clock. So move this to start[stop]_streaming() function. Signed-off-by: Josh Wu <josh.wu@atmel.com> --- Changes in v4: - need to call pm_runtime_disable() in atmel_isi_remove(). - merged the patch which remove isi disable code in atmel_isi_probe() as isi peripherial clock is not enabled in this moment. - refine the commit log Changes in v3: None Changes in v2: - merged v1 two patch into one. - use runtime_pm_put() instead of runtime_pm_put_sync() - enable peripheral clock before access ISI registers. drivers/media/platform/soc_camera/atmel-isi.c | 54 +++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 8 deletions(-)