diff mbox

ahci: Store irq number in struct ahci_host_priv

Message ID 20150527161603.GW10428@rric.localhost (mailing list archive)
State New, archived
Headers show

Commit Message

Robert Richter May 27, 2015, 4:16 p.m. UTC
On 27.05.15 10:01:32, Robert Richter wrote:
> From: Robert Richter <rrichter@cavium.com>
> 
> The irq number for msix devices is taken from msi_list instead of
> pci_dev. Thus, the irq number of a device needs to be stored in struct
> ahci_host_priv now.  Host controller can be activated then in a
> generic way.
> 
> Signed-off-by: Robert Richter <rrichter@cavium.com>

Rebased version onto libata/for-4.2 below. Please apply 1/3 and 3/3
from the original patch set before and after.

Thanks,

-Robert



From b50a5e478b8fce17603a91a5d272bb49527239af Mon Sep 17 00:00:00 2001
From: Robert Richter <rrichter@cavium.com>
Date: Tue, 12 May 2015 13:57:27 +0200
Subject: [PATCH] ahci: Store irq number in struct ahci_host_priv

The irq number for msix devices is taken from msi_list instead of
pci_dev. Thus, the irq number of a device needs to be stored in struct
ahci_host_priv now.  Host controller can be activated then in a
generic way.

Signed-off-by: Robert Richter <rrichter@cavium.com>
---
 drivers/ata/acard-ahci.c       |  4 +++-
 drivers/ata/ahci.c             | 15 ++++++++++-----
 drivers/ata/ahci.h             |  4 ++--
 drivers/ata/libahci.c          | 16 +++++++---------
 drivers/ata/libahci_platform.c |  4 +++-
 drivers/ata/sata_highbank.c    |  3 ++-
 6 files changed, 27 insertions(+), 19 deletions(-)

Comments

Tejun Heo May 27, 2015, 6:14 p.m. UTC | #1
Hello,

On Wed, May 27, 2015 at 06:16:03PM +0200, Robert Richter wrote:
> From b50a5e478b8fce17603a91a5d272bb49527239af Mon Sep 17 00:00:00 2001
> From: Robert Richter <rrichter@cavium.com>
> Date: Tue, 12 May 2015 13:57:27 +0200
> Subject: [PATCH] ahci: Store irq number in struct ahci_host_priv
> 

Currently, ahci supports only msi and intx; however, msix support is
planned for ....

> The irq number for msix devices is taken from msi_list instead of
> pci_dev. Thus, the irq number of a device needs to be stored in struct
> ahci_host_priv now.  Host controller can be activated then in a
> generic way.

The above paragraph doesn't really explain why it needs to be moved to
host_priv, does it?  Can you please elaborate a bit further?

> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> index 1add5baec584..1c99402a1017 100644
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -2344,7 +2344,7 @@ static int ahci_port_start(struct ata_port *ap)
>  	/*
>  	 * Switch to per-port locking in case each port has its own MSI vector.
>  	 */
> -	if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) {
> +	if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {

This sort of cleanups are fine but please mention them in the patch
description.

Thanks.
diff mbox

Patch

diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 12489ce863c4..ed6a30cd681a 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -433,6 +433,8 @@  static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
+
+	hpriv->irq = pdev->irq;
 	hpriv->flags |= (unsigned long)pi.private_data;
 
 	if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
@@ -498,7 +500,7 @@  static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
 	acard_ahci_pci_print_info(host);
 
 	pci_set_master(pdev);
-	return ahci_host_activate(host, pdev->irq, &acard_ahci_sht);
+	return ahci_host_activate(host, &acard_ahci_sht);
 }
 
 module_pci_driver(acard_ahci_pci_driver);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 903ceed88aff..c40bb5670e88 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1237,20 +1237,25 @@  static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 	if (nvec > 1)
 		hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
 
-	return nvec;
+	goto out;
 
 single_msi:
+	nvec = 1;
+
 	rc = pci_enable_msi(pdev);
 	if (rc < 0)
 		return rc;
+out:
+	hpriv->irq = pdev->irq;
 
-	return 1;
+	return nvec;
 }
 
 static int ahci_init_intx(struct pci_dev *pdev, unsigned int n_ports,
 			struct ahci_host_priv *hpriv)
 {
 	pci_intx(pdev, 1);
+	hpriv->irq = pdev->irq;
 
 	return 0;
 }
@@ -1428,13 +1433,13 @@  static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
 
-	ahci_init_interrupts(pdev, n_ports, hpriv);
-
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	if (!host)
 		return -ENOMEM;
 	host->private_data = hpriv;
 
+	ahci_init_interrupts(pdev, n_ports, hpriv);
+
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;
 	else
@@ -1480,7 +1485,7 @@  static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 
-	return ahci_host_activate(host, pdev->irq, &ahci_sht);
+	return ahci_host_activate(host, &ahci_sht);
 }
 
 module_pci_driver(ahci_pci_driver);
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index f4429600e2bf..5b8e8a0fab48 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -343,6 +343,7 @@  struct ahci_host_priv {
 	struct phy		**phys;
 	unsigned		nports;		/* Number of ports */
 	void			*plat_data;	/* Other platform data */
+	unsigned int		irq;		/* interrupt line */
 	/*
 	 * Optional ahci_start_engine override, if not set this gets set to the
 	 * default ahci_start_engine during ahci_save_initial_config, this can
@@ -395,8 +396,7 @@  void ahci_set_em_messages(struct ahci_host_priv *hpriv,
 			  struct ata_port_info *pi);
 int ahci_reset_em(struct ata_host *host);
 void ahci_print_info(struct ata_host *host, const char *scc_s);
-int ahci_host_activate(struct ata_host *host, int irq,
-		       struct scsi_host_template *sht);
+int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht);
 void ahci_error_handler(struct ata_port *ap);
 
 static inline void __iomem *__ahci_port_base(struct ata_host *host,
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 1add5baec584..1c99402a1017 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2344,7 +2344,7 @@  static int ahci_port_start(struct ata_port *ap)
 	/*
 	 * Switch to per-port locking in case each port has its own MSI vector.
 	 */
-	if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) {
+	if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
 		spin_lock_init(&pp->lock);
 		ap->lock = &pp->lock;
 	}
@@ -2472,7 +2472,10 @@  static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
 	rc = ata_host_start(host);
 	if (rc)
 		return rc;
-
+	/*
+	 * Requests IRQs according to AHCI-1.1 when multiple MSIs were
+	 * allocated. That is one MSI per port, starting from @irq.
+	 */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
 
@@ -2511,23 +2514,18 @@  static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
 /**
  *	ahci_host_activate - start AHCI host, request IRQs and register it
  *	@host: target ATA host
- *	@irq: base IRQ number to request
  *	@sht: scsi_host_template to use when registering the host
  *
- *	Similar to ata_host_activate, but requests IRQs according to AHCI-1.1
- *	when multiple MSIs were allocated. That is one MSI per port, starting
- *	from @irq.
- *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
  *
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ahci_host_activate(struct ata_host *host, int irq,
-		       struct scsi_host_template *sht)
+int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
+	int irq = hpriv->irq;
 	int rc;
 
 	if (hpriv->flags & AHCI_HFLAG_MULTI_MSI)
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index d89305d289f6..aaa761b9081c 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -518,6 +518,8 @@  int ahci_platform_init_host(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
+	hpriv->irq = irq;
+
 	/* prepare host */
 	pi.private_data = (void *)(unsigned long)hpriv->flags;
 
@@ -588,7 +590,7 @@  int ahci_platform_init_host(struct platform_device *pdev,
 	ahci_init_controller(host);
 	ahci_print_info(host, "platform");
 
-	return ahci_host_activate(host, irq, sht);
+	return ahci_host_activate(host, sht);
 }
 EXPORT_SYMBOL_GPL(ahci_platform_init_host);
 
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 24e311fe2c1c..8638d575b2b9 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -499,6 +499,7 @@  static int ahci_highbank_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	hpriv->irq = irq;
 	hpriv->flags |= (unsigned long)pi.private_data;
 
 	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
@@ -568,7 +569,7 @@  static int ahci_highbank_probe(struct platform_device *pdev)
 	ahci_init_controller(host);
 	ahci_print_info(host, "platform");
 
-	rc = ahci_host_activate(host, irq, &ahci_highbank_platform_sht);
+	rc = ahci_host_activate(host, &ahci_highbank_platform_sht);
 	if (rc)
 		goto err0;