Message ID | 1433000370-19509-19-git-send-email-mikko.rapeli@iki.fi (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
At Sat, 30 May 2015 17:38:10 +0200, Mikko Rapeli wrote: > > Fixes userspace compilation error: > > error: expected specifier-qualifier-list before ‘DECLARE_BITMAP’ > DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ > > DECLARE_BITMAP etc macros are not meant for userspace headers and thus > added here as private copies for emu10k.h. > > Fix was suggested by Arnd Bergmann <arnd@arndb.de> in message > <2168807.4Yxh5gl11Q@wuerfel> on lkml. > > Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> > --- > include/uapi/sound/emu10k1.h | 23 ++++++++++++++++++++--- > 1 file changed, 20 insertions(+), 3 deletions(-) > > diff --git a/include/uapi/sound/emu10k1.h b/include/uapi/sound/emu10k1.h > index ec1535b..7575f0f 100644 > --- a/include/uapi/sound/emu10k1.h > +++ b/include/uapi/sound/emu10k1.h > @@ -34,6 +34,23 @@ > > #define EMU10K1_FX8010_PCM_COUNT 8 > > +/* > + * Following definitions are copies from kernel headers to support compiling > + * this header file in userspace. The definitions are not generally available > + * in uapi headers so the needed things are copied here wtih __EMU10k1 prefix. > + */ > + > +/* From include/linux/bitops.h */ > +#define __EMU10K1_BITS_PER_BYTE 8 > +/* From include/linux/kernel.h */ > +#define __EMU10K1_DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) > +/* From include/linux/bitops.h */ > +#define __EMU10K1_BITS_TO_LONGS(nr) \ > + __EMU10K1_DIV_ROUND_UP(nr, __EMU10K1_BITS_PER_BYTE * sizeof(long)) > +/* From include/linux/types.h */ > +#define __EMU10K1_DECLARE_BITMAP(name,bits) \ > + unsigned long name[__EMU10K1_BITS_TO_LONGS(bits)] This is way too complicated just for a few expansion of the aligned size arrays, IMO. Rather simplify it like below with a comment: /* the array must be aligned to unsigned long (i.e. 4 or 8 bytes) */ #define __EMU10K1_DECLARE_BITMAP(name) \ unsigned long name[(bits) / sizeof(unsigned long)] or expand as is at each place like: unsigned long gpr_valid[0x200 / sizeof(unsigned long)]; thanks, Takashi > /* instruction set */ > #define iMAC0 0x00 /* R = A + (X * Y >> 31) ; saturation */ > #define iMAC1 0x01 /* R = A + (-X * Y >> 31) ; saturation */ > @@ -300,7 +317,7 @@ struct snd_emu10k1_fx8010_control_old_gpr { > struct snd_emu10k1_fx8010_code { > char name[128]; > > - DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ > + __EMU10K1_DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ > __u32 __user *gpr_map; /* initializers */ > > unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */ > @@ -313,11 +330,11 @@ struct snd_emu10k1_fx8010_code { > unsigned int gpr_list_control_total; /* total count of GPR controls */ > struct snd_emu10k1_fx8010_control_gpr __user *gpr_list_controls; /* listed GPR controls */ > > - DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */ > + __EMU10K1_DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */ > __u32 __user *tram_data_map; /* data initializers */ > __u32 __user *tram_addr_map; /* map initializers */ > > - DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */ > + __EMU10K1_DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */ > __u32 __user *code; /* one instruction - 64 bits */ > }; > > -- > 2.1.4 >
At Sun, 31 May 2015 09:18:57 +0200, Takashi Iwai wrote: > > At Sat, 30 May 2015 17:38:10 +0200, > Mikko Rapeli wrote: > > > > Fixes userspace compilation error: > > > > error: expected specifier-qualifier-list before ‘DECLARE_BITMAP’ > > DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ > > > > DECLARE_BITMAP etc macros are not meant for userspace headers and thus > > added here as private copies for emu10k.h. > > > > Fix was suggested by Arnd Bergmann <arnd@arndb.de> in message > > <2168807.4Yxh5gl11Q@wuerfel> on lkml. > > > > Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> > > --- > > include/uapi/sound/emu10k1.h | 23 ++++++++++++++++++++--- > > 1 file changed, 20 insertions(+), 3 deletions(-) > > > > diff --git a/include/uapi/sound/emu10k1.h b/include/uapi/sound/emu10k1.h > > index ec1535b..7575f0f 100644 > > --- a/include/uapi/sound/emu10k1.h > > +++ b/include/uapi/sound/emu10k1.h > > @@ -34,6 +34,23 @@ > > > > #define EMU10K1_FX8010_PCM_COUNT 8 > > > > +/* > > + * Following definitions are copies from kernel headers to support compiling > > + * this header file in userspace. The definitions are not generally available > > + * in uapi headers so the needed things are copied here wtih __EMU10k1 prefix. > > + */ > > + > > +/* From include/linux/bitops.h */ > > +#define __EMU10K1_BITS_PER_BYTE 8 > > +/* From include/linux/kernel.h */ > > +#define __EMU10K1_DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) > > +/* From include/linux/bitops.h */ > > +#define __EMU10K1_BITS_TO_LONGS(nr) \ > > + __EMU10K1_DIV_ROUND_UP(nr, __EMU10K1_BITS_PER_BYTE * sizeof(long)) > > +/* From include/linux/types.h */ > > +#define __EMU10K1_DECLARE_BITMAP(name,bits) \ > > + unsigned long name[__EMU10K1_BITS_TO_LONGS(bits)] > > This is way too complicated just for a few expansion of the aligned > size arrays, IMO. Rather simplify it like below with a comment: > > /* the array must be aligned to unsigned long (i.e. 4 or 8 bytes) */ > #define __EMU10K1_DECLARE_BITMAP(name) \ > unsigned long name[(bits) / sizeof(unsigned long)] Crap, of course, it must be multiplied with 8. /* the array must be aligned to unsigned long (i.e. 32 or 64) */ #define __EMU10K1_DECLARE_BITMAP(name) \ unsigned long name[(bits) / (sizeof(unsigned long) * 8)] Takashi
On Sun, May 31, 2015 at 10:12:07AM +0200, Takashi Iwai wrote: > At Sun, 31 May 2015 09:18:57 +0200, > Takashi Iwai wrote: > > > > At Sat, 30 May 2015 17:38:10 +0200, > > Mikko Rapeli wrote: > > > > > > Fixes userspace compilation error: > > > > > > error: expected specifier-qualifier-list before ‘DECLARE_BITMAP’ > > > DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ > > > > > > DECLARE_BITMAP etc macros are not meant for userspace headers and thus > > > added here as private copies for emu10k.h. > > > > > > Fix was suggested by Arnd Bergmann <arnd@arndb.de> in message > > > <2168807.4Yxh5gl11Q@wuerfel> on lkml. > > > > > > Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> > > > --- > > > include/uapi/sound/emu10k1.h | 23 ++++++++++++++++++++--- > > > 1 file changed, 20 insertions(+), 3 deletions(-) > > > > > > diff --git a/include/uapi/sound/emu10k1.h b/include/uapi/sound/emu10k1.h > > > index ec1535b..7575f0f 100644 > > > --- a/include/uapi/sound/emu10k1.h > > > +++ b/include/uapi/sound/emu10k1.h > > > @@ -34,6 +34,23 @@ > > > > > > #define EMU10K1_FX8010_PCM_COUNT 8 > > > > > > +/* > > > + * Following definitions are copies from kernel headers to support compiling > > > + * this header file in userspace. The definitions are not generally available > > > + * in uapi headers so the needed things are copied here wtih __EMU10k1 prefix. > > > + */ > > > + > > > +/* From include/linux/bitops.h */ > > > +#define __EMU10K1_BITS_PER_BYTE 8 > > > +/* From include/linux/kernel.h */ > > > +#define __EMU10K1_DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) > > > +/* From include/linux/bitops.h */ > > > +#define __EMU10K1_BITS_TO_LONGS(nr) \ > > > + __EMU10K1_DIV_ROUND_UP(nr, __EMU10K1_BITS_PER_BYTE * sizeof(long)) > > > +/* From include/linux/types.h */ > > > +#define __EMU10K1_DECLARE_BITMAP(name,bits) \ > > > + unsigned long name[__EMU10K1_BITS_TO_LONGS(bits)] > > > > This is way too complicated just for a few expansion of the aligned > > size arrays, IMO. Rather simplify it like below with a comment: > > > > /* the array must be aligned to unsigned long (i.e. 4 or 8 bytes) */ > > #define __EMU10K1_DECLARE_BITMAP(name) \ > > unsigned long name[(bits) / sizeof(unsigned long)] > > Crap, of course, it must be multiplied with 8. > > /* the array must be aligned to unsigned long (i.e. 32 or 64) */ > #define __EMU10K1_DECLARE_BITMAP(name) \ > unsigned long name[(bits) / (sizeof(unsigned long) * 8)] Thanks, I'll use this definition instead. -Mikko
diff --git a/include/uapi/sound/emu10k1.h b/include/uapi/sound/emu10k1.h index ec1535b..7575f0f 100644 --- a/include/uapi/sound/emu10k1.h +++ b/include/uapi/sound/emu10k1.h @@ -34,6 +34,23 @@ #define EMU10K1_FX8010_PCM_COUNT 8 +/* + * Following definitions are copies from kernel headers to support compiling + * this header file in userspace. The definitions are not generally available + * in uapi headers so the needed things are copied here wtih __EMU10k1 prefix. + */ + +/* From include/linux/bitops.h */ +#define __EMU10K1_BITS_PER_BYTE 8 +/* From include/linux/kernel.h */ +#define __EMU10K1_DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) +/* From include/linux/bitops.h */ +#define __EMU10K1_BITS_TO_LONGS(nr) \ + __EMU10K1_DIV_ROUND_UP(nr, __EMU10K1_BITS_PER_BYTE * sizeof(long)) +/* From include/linux/types.h */ +#define __EMU10K1_DECLARE_BITMAP(name,bits) \ + unsigned long name[__EMU10K1_BITS_TO_LONGS(bits)] + /* instruction set */ #define iMAC0 0x00 /* R = A + (X * Y >> 31) ; saturation */ #define iMAC1 0x01 /* R = A + (-X * Y >> 31) ; saturation */ @@ -300,7 +317,7 @@ struct snd_emu10k1_fx8010_control_old_gpr { struct snd_emu10k1_fx8010_code { char name[128]; - DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ + __EMU10K1_DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ __u32 __user *gpr_map; /* initializers */ unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */ @@ -313,11 +330,11 @@ struct snd_emu10k1_fx8010_code { unsigned int gpr_list_control_total; /* total count of GPR controls */ struct snd_emu10k1_fx8010_control_gpr __user *gpr_list_controls; /* listed GPR controls */ - DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */ + __EMU10K1_DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */ __u32 __user *tram_data_map; /* data initializers */ __u32 __user *tram_addr_map; /* map initializers */ - DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */ + __EMU10K1_DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */ __u32 __user *code; /* one instruction - 64 bits */ };
Fixes userspace compilation error: error: expected specifier-qualifier-list before ‘DECLARE_BITMAP’ DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ DECLARE_BITMAP etc macros are not meant for userspace headers and thus added here as private copies for emu10k.h. Fix was suggested by Arnd Bergmann <arnd@arndb.de> in message <2168807.4Yxh5gl11Q@wuerfel> on lkml. Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> --- include/uapi/sound/emu10k1.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)