| Message ID | 1433139798-23450-3-git-send-email-tomi.valkeinen@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Mike, Stephen & Tero, * Tomi Valkeinen <tomi.valkeinen@ti.com> [150531 23:25]: > DESHDCP clock is needed on DRA7 based SoCs to enable the DSS IP. That > clock is an odd one, as it is not supposed to be any kind of core clock > for DSS, and we don't even support HDCP, but the clock is still needed > even for the HWMOD framework to be able to reset the DSS IP. > > As there's no support for multiple core clocks in the HWMOD framework, > we don't have any obvious place to enable this clock when DSS IP is > being enabled. > > Furthermore, the HDMI on OMAP5 DSS is the same as on DRA7, and OMAP5 > does not have any such clock configuration bit. This suggests that on > OMAP5 the DESHDCP clock is always enabled, and for DRA7 we have the > possibility to gate it. > > So, as we don't have any clean way to enable and disable the clock > based on the need, this patch enables the clock at boot time, making it > work similarly to OMAP5. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> This series seems like I should take it as a whole series.. Care to ack/nack on this one? Regards, Tony > --- > drivers/clk/ti/clk-7xx.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c > index 2dd956b9affa..63b8323df918 100644 > --- a/drivers/clk/ti/clk-7xx.c > +++ b/drivers/clk/ti/clk-7xx.c > @@ -312,7 +312,7 @@ static struct ti_dt_clk dra7xx_clks[] = { > int __init dra7xx_dt_clk_init(void) > { > int rc; > - struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck; > + struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck; > > ti_dt_clocks_register(dra7xx_clks); > > @@ -348,5 +348,10 @@ int __init dra7xx_dt_clk_init(void) > if (rc) > pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); > > + hdcp_ck = clk_get_sys(NULL, "dss_deshdcp_clk"); > + rc = clk_prepare_enable(hdcp_ck); > + if (rc) > + pr_err("%s: failed to set dss_deshdcp_clk\n", __func__); > + > return rc; > } > -- > 2.1.4 >
On 06/02/2015 12:49 AM, Tony Lindgren wrote: > Hi Mike, Stephen & Tero, > > * Tomi Valkeinen <tomi.valkeinen@ti.com> [150531 23:25]: >> DESHDCP clock is needed on DRA7 based SoCs to enable the DSS IP. That >> clock is an odd one, as it is not supposed to be any kind of core clock >> for DSS, and we don't even support HDCP, but the clock is still needed >> even for the HWMOD framework to be able to reset the DSS IP. >> >> As there's no support for multiple core clocks in the HWMOD framework, >> we don't have any obvious place to enable this clock when DSS IP is >> being enabled. >> >> Furthermore, the HDMI on OMAP5 DSS is the same as on DRA7, and OMAP5 >> does not have any such clock configuration bit. This suggests that on >> OMAP5 the DESHDCP clock is always enabled, and for DRA7 we have the >> possibility to gate it. >> >> So, as we don't have any clean way to enable and disable the clock >> based on the need, this patch enables the clock at boot time, making it >> work similarly to OMAP5. >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > > This series seems like I should take it as a whole series.. > Care to ack/nack on this one? > > Regards, Acked-by: Tero Kristo <t-kristo@ti.com> > > Tony > > >> --- >> drivers/clk/ti/clk-7xx.c | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c >> index 2dd956b9affa..63b8323df918 100644 >> --- a/drivers/clk/ti/clk-7xx.c >> +++ b/drivers/clk/ti/clk-7xx.c >> @@ -312,7 +312,7 @@ static struct ti_dt_clk dra7xx_clks[] = { >> int __init dra7xx_dt_clk_init(void) >> { >> int rc; >> - struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck; >> + struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck; >> >> ti_dt_clocks_register(dra7xx_clks); >> >> @@ -348,5 +348,10 @@ int __init dra7xx_dt_clk_init(void) >> if (rc) >> pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); >> >> + hdcp_ck = clk_get_sys(NULL, "dss_deshdcp_clk"); >> + rc = clk_prepare_enable(hdcp_ck); >> + if (rc) >> + pr_err("%s: failed to set dss_deshdcp_clk\n", __func__); >> + >> return rc; >> } >> -- >> 2.1.4 >>
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index 2dd956b9affa..63b8323df918 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -312,7 +312,7 @@ static struct ti_dt_clk dra7xx_clks[] = { int __init dra7xx_dt_clk_init(void) { int rc; - struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck; + struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck; ti_dt_clocks_register(dra7xx_clks); @@ -348,5 +348,10 @@ int __init dra7xx_dt_clk_init(void) if (rc) pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); + hdcp_ck = clk_get_sys(NULL, "dss_deshdcp_clk"); + rc = clk_prepare_enable(hdcp_ck); + if (rc) + pr_err("%s: failed to set dss_deshdcp_clk\n", __func__); + return rc; }
DESHDCP clock is needed on DRA7 based SoCs to enable the DSS IP. That clock is an odd one, as it is not supposed to be any kind of core clock for DSS, and we don't even support HDCP, but the clock is still needed even for the HWMOD framework to be able to reset the DSS IP. As there's no support for multiple core clocks in the HWMOD framework, we don't have any obvious place to enable this clock when DSS IP is being enabled. Furthermore, the HDMI on OMAP5 DSS is the same as on DRA7, and OMAP5 does not have any such clock configuration bit. This suggests that on OMAP5 the DESHDCP clock is always enabled, and for DRA7 we have the possibility to gate it. So, as we don't have any clean way to enable and disable the clock based on the need, this patch enables the clock at boot time, making it work similarly to OMAP5. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- drivers/clk/ti/clk-7xx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)