| Message ID | 1434461440-3965-1-git-send-email-fabien.dessenne@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Fabien, On 06/16/2015 03:30 PM, Fabien Dessenne wrote: > Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the > first of the two bdisp devices, defining register address, interrupt and > clock. > > Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> > --- > arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi > index 208b5e8..6f40bc9 100644 > --- a/arch/arm/boot/dts/stih410.dtsi > +++ b/arch/arm/boot/dts/stih410.dtsi > @@ -10,6 +10,10 @@ > #include "stih407-family.dtsi" > #include "stih410-pinctrl.dtsi" > / { > + aliases { > + bdisp0 = &bdisp0; > + }; > + > soc { > usb2_picophy1: phy2 { > compatible = "st,stih407-usb2-phy"; > @@ -218,5 +222,13 @@ > }; > }; > }; > + > + bdisp0:bdisp@9f10000 { > + compatible = "st,stih407-bdisp"; > + reg = <0x9f10000 0x1000>; > + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; > + clock-names = "bdisp"; > + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; > + }; Isn't the bdisp also present on STiH407 SoC? If so, could you please move this node to stih407-family file? Thanks, Maxime
Hi Maxime, > -----Original Message----- > From: Maxime COQUELIN > Sent: mercredi 17 juin 2015 14:13 > To: Fabien DESSENNE; Srinivas Kandagatla; Patrice CHOTARD; Rob Herring; > Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Russell King; linux-arm- > kernel@lists.infradead.org; kernel@stlinux.com; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org > Cc: Benjamin Gaignard > Subject: Re: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes > > Hi Fabien, > > On 06/16/2015 03:30 PM, Fabien Dessenne wrote: > > Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the > > first of the two bdisp devices, defining register address, interrupt > > and clock. > > > > Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> > > --- > > arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/arch/arm/boot/dts/stih410.dtsi > > b/arch/arm/boot/dts/stih410.dtsi index 208b5e8..6f40bc9 100644 > > --- a/arch/arm/boot/dts/stih410.dtsi > > +++ b/arch/arm/boot/dts/stih410.dtsi > > @@ -10,6 +10,10 @@ > > #include "stih407-family.dtsi" > > #include "stih410-pinctrl.dtsi" > > / { > > + aliases { > > + bdisp0 = &bdisp0; > > + }; > > + > > soc { > > usb2_picophy1: phy2 { > > compatible = "st,stih407-usb2-phy"; @@ -218,5 > +222,13 @@ > > }; > > }; > > }; > > + > > + bdisp0:bdisp@9f10000 { > > + compatible = "st,stih407-bdisp"; > > + reg = <0x9f10000 0x1000>; > > + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; > > + clock-names = "bdisp"; > > + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; > > + }; > > Isn't the bdisp also present on STiH407 SoC? > If so, could you please move this node to stih407-family file? > > Thanks, > Maxime For the time being, it is not planned to be supported on STiH407. Maybe one day... Fabien
Hi Fabien, On 06/16/2015 03:30 PM, Fabien Dessenne wrote: > Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the > first of the two bdisp devices, defining register address, interrupt and > clock. > > Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> > --- > arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > Patch applied to sti-dt-for-v4.3. Thanks! Maxime
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 208b5e8..6f40bc9 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -10,6 +10,10 @@ #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" / { + aliases { + bdisp0 = &bdisp0; + }; + soc { usb2_picophy1: phy2 { compatible = "st,stih407-usb2-phy"; @@ -218,5 +222,13 @@ }; }; }; + + bdisp0:bdisp@9f10000 { + compatible = "st,stih407-bdisp"; + reg = <0x9f10000 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; + clock-names = "bdisp"; + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; + }; }; };
Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the first of the two bdisp devices, defining register address, interrupt and clock. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> --- arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)