diff mbox

[v3] arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG

Message ID 1434108762-5637-1-git-send-email-kristina.martsenko@arm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kristina Martsenko June 12, 2015, 11:32 a.m. UTC 
Add a DTS file for the MP2 Cortex-A53 Soft Macrocell Model implemented
on a LogicTile Express 20MG (V2F-1XV7) daughterboard. This is based on
the version that's currently available from the ARM DTS repository [1].

[1] git://linux-arm.org/arm-dts.git

Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
---

Changes in v3:
 - Also removed the /memreserve/, the Boot Monitor adds that too.

Changes in v2:
 - Removed enable-method and cpu-release-addr from the second CPU (since
   the Boot Monitor can add those itself).

 MAINTAINERS                                        |   1 +
 arch/arm64/boot/dts/arm/Makefile                   |   1 +
 .../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts      | 191 +++++++++++++++++++++
 3 files changed, 193 insertions(+)
 create mode 100644 arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts

Comments

Sudeep Holla June 18, 2015, 4:17 p.m. UTC | #1 
On 12/06/15 12:32, Kristina Martsenko wrote:
> Add a DTS file for the MP2 Cortex-A53 Soft Macrocell Model implemented
> on a LogicTile Express 20MG (V2F-1XV7) daughterboard. This is based on
> the version that's currently available from the ARM DTS repository [1].
>

Acked-by: Sudeep Holla <sudeep.holla@arm.com>

Need to check if it's possible to get this in for v4.2.

Regards,
Sudeep
diff mbox

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index f6b9f82..02ef46d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1613,6 +1613,7 @@  M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/vexpress*
+F:	arch/arm64/boot/dts/arm/vexpress*
 F:	arch/arm/mach-vexpress/
 F:	*/*/vexpress*
 F:	*/*/*/vexpress*
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index c5c98b9..bb3c072 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,6 +1,7 @@ 
 dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
new file mode 100644
index 0000000..5b1d018
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -0,0 +1,191 @@ 
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "V2F-1XV7 Cortex-A53x2 SMM";
+	arm,hbi = <0x247>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		stdout-path = "serial0:38400n8";
+	};
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		smbclk: osc@4 {
+			/* SMC clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "smclk";
+		};
+
+		volt@0 {
+			/* VIO to expansion board above */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VIO_UP";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		volt@1 {
+			/* 12V from power connector J6 */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "12";
+			regulator-always-on;
+		};
+
+		temp@0 {
+			/* FPGA temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "FPGA";
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		/include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+	};
+};