| Message ID | 1434513719-3580-4-git-send-email-airlied@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Takashi/Dave, Shall we move or cc this discussion on audio driver side to ALSA ML? I think we also need to decide how to manage PCM devices for DP MST. Now the HD-A driver create a PCM device for each pin, and the substream number is 1 for each PCM. Now with DP MST enabled, each pin can support multiple streams (e.g. 3 on Intel HSW/BDW/SKL). There may be 2 options: -#1: Let an HDMI codec specify number of substreams, same as the number of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other vendors can also specify a value according to actual HW capabilities. So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors (for 3 display pipelines), so we can open up to 3 substreams at the same time. When the audio driver finds all 3 convertors are used when opening a new substream, it will fail. - #2: Create PCM device dynamically. Only create a PCM devices for a device entry which connects to monitor with audio support. When the monitor is removed, the PCM device will be disconnected, closed and removed, similar to the USB case. This will change ALSA core. But there will be less PCM devices and substreams, since the number of connected monitors Is decided by the actual GPU display pipeline. Could you share your preference on these 2 options or other suggestions? Thanks Mengdong > -----Original Message----- > From: Intel-gfx [mailto:intel-gfx-bounces@lists.freedesktop.org] On Behalf Of > Dave Airlie > Sent: Wednesday, June 17, 2015 12:02 PM > To: intel-gfx@lists.freedesktop.org > Subject: [Intel-gfx] [PATCH 3/4] snd: add support for displayport multi-stream > to hda codec. > > From: Dave Airlie <airlied@redhat.com> > > Add new verbs GET_DP_STREAM_ID and SET_DP_STREAM_ID from Intel docs. > get stream id and print in proc > split ELD to be per device not per pin > handle pd/eldv per device not per pin > setup codec->dp_mst earlier. > > Signed-off-by: Dave Airlie <airlied@redhat.com> > --- > include/sound/hda_verbs.h | 2 + > sound/pci/hda/hda_codec.c | 1 + > sound/pci/hda/hda_proc.c | 5 +- > sound/pci/hda/patch_hdmi.c | 181 > +++++++++++++++++++++++++++++++-------------- > 4 files changed, 131 insertions(+), 58 deletions(-) > > diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h index > d0509db..3b62ac5 100644 > --- a/include/sound/hda_verbs.h > +++ b/include/sound/hda_verbs.h > @@ -75,6 +75,7 @@ enum { > #define AC_VERB_GET_HDMI_CHAN_SLOT 0x0f34 > #define AC_VERB_GET_DEVICE_SEL 0xf35 > #define AC_VERB_GET_DEVICE_LIST 0xf36 > +#define AC_VERB_GET_DP_STREAM_ID 0xf3c > > /* > * SET verbs > @@ -115,6 +116,7 @@ enum { > #define AC_VERB_SET_HDMI_CP_CTRL 0x733 > #define AC_VERB_SET_HDMI_CHAN_SLOT 0x734 > #define AC_VERB_SET_DEVICE_SEL 0x735 > +#define AC_VERB_SET_DP_STREAM_ID 0x73C > > /* > * Parameter IDs > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index > 5645481..3981c63 100644 > --- a/sound/pci/hda/hda_codec.c > +++ b/sound/pci/hda/hda_codec.c > @@ -482,6 +482,7 @@ int snd_hda_get_devices(struct hda_codec *codec, > hda_nid_t nid, > } > return devices; > } > +EXPORT_SYMBOL_GPL(snd_hda_get_devices); > > /* > * destructor > diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index > baaf7ed0..39fac53 100644 > --- a/sound/pci/hda/hda_proc.c > +++ b/sound/pci/hda/hda_proc.c > @@ -644,10 +644,13 @@ static void print_device_list(struct snd_info_buffer > *buffer, > int i, curr = -1; > u8 dev_list[AC_MAX_DEV_LIST_LEN]; > int devlist_len; > + int dp_s_id; > > + dp_s_id = snd_hda_codec_read(codec, nid, 0, > + AC_VERB_GET_DP_STREAM_ID, 0); > devlist_len = snd_hda_get_devices(codec, nid, dev_list, > AC_MAX_DEV_LIST_LEN); > - snd_iprintf(buffer, " Devices: %d\n", devlist_len); > + snd_iprintf(buffer, " Devices: %d: 0x%x\n", devlist_len, dp_s_id); > if (devlist_len <= 0) > return; > > diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index > 5f44f60..8272656 100644 > --- a/sound/pci/hda/patch_hdmi.c > +++ b/sound/pci/hda/patch_hdmi.c > @@ -68,6 +68,17 @@ struct hdmi_spec_per_cvt { > /* max. connections to a widget */ > #define HDA_MAX_CONNECTIONS 32 > > +struct hdmi_spec_per_pin; > +#define HDA_MAX_DEVICES 3 > +struct hdmi_spec_per_device { > + struct hdmi_spec_per_pin *pin; > + int device_idx; > + struct hdmi_eld sink_eld; > +#ifdef CONFIG_PROC_FS > + struct snd_info_entry *proc_entry; > +#endif > +}; > + > struct hdmi_spec_per_pin { > hda_nid_t pin_nid; > int num_mux_nids; > @@ -76,7 +87,11 @@ struct hdmi_spec_per_pin { > hda_nid_t cvt_nid; > > struct hda_codec *codec; > - struct hdmi_eld sink_eld; > + > + int num_devices; > + u8 dev_list[AC_MAX_DEV_LIST_LEN]; > + struct hdmi_spec_per_device devices[HDA_MAX_DEVICES]; > + > struct mutex lock; > struct delayed_work work; > struct snd_kcontrol *eld_ctl; > @@ -86,9 +101,6 @@ struct hdmi_spec_per_pin { > bool non_pcm; > bool chmap_set; /* channel-map override by ALSA API? */ > unsigned char chmap[8]; /* ALSA API channel-map */ -#ifdef > CONFIG_PROC_FS > - struct snd_info_entry *proc_entry; > -#endif > }; > > struct cea_channel_speaker_allocation; > @@ -409,7 +421,7 @@ static int hdmi_eld_ctl_info(struct snd_kcontrol > *kcontrol, > > pin_idx = kcontrol->private_value; > per_pin = get_pin(spec, pin_idx); > - eld = &per_pin->sink_eld; > + eld = &per_pin->devices[0].sink_eld; > > mutex_lock(&per_pin->lock); > uinfo->count = eld->eld_valid ? eld->eld_size : 0; @@ -429,7 +441,7 @@ > static int hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol, > > pin_idx = kcontrol->private_value; > per_pin = get_pin(spec, pin_idx); > - eld = &per_pin->sink_eld; > + eld = &per_pin->devices[0].sink_eld; > > mutex_lock(&per_pin->lock); > if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data)) { @@ -549,60 > +561,63 @@ static void hdmi_set_channel_count(struct hda_codec *codec, > */ > > #ifdef CONFIG_PROC_FS > -static void print_eld_info(struct snd_info_entry *entry, > - struct snd_info_buffer *buffer) > +static void print_eld_info_device(struct snd_info_entry *entry, > + struct snd_info_buffer *buffer) > { > - struct hdmi_spec_per_pin *per_pin = entry->private_data; > + struct hdmi_spec_per_device *per_device = entry->private_data; > > - mutex_lock(&per_pin->lock); > - snd_hdmi_print_eld_info(&per_pin->sink_eld, buffer); > - mutex_unlock(&per_pin->lock); > + mutex_lock(&per_device->pin->lock); > + snd_hdmi_print_eld_info(&per_device->sink_eld, buffer); > + mutex_unlock(&per_device->pin->lock); > } > > -static void write_eld_info(struct snd_info_entry *entry, > - struct snd_info_buffer *buffer) > +static void write_eld_info_device(struct snd_info_entry *entry, > + struct snd_info_buffer *buffer) > { > - struct hdmi_spec_per_pin *per_pin = entry->private_data; > + struct hdmi_spec_per_device *per_device = entry->private_data; > > - mutex_lock(&per_pin->lock); > - snd_hdmi_write_eld_info(&per_pin->sink_eld, buffer); > - mutex_unlock(&per_pin->lock); > + mutex_lock(&per_device->pin->lock); > + snd_hdmi_write_eld_info(&per_device->sink_eld, buffer); > + mutex_unlock(&per_device->pin->lock); > } > > -static int eld_proc_new(struct hdmi_spec_per_pin *per_pin, int index) > +static int eld_device_proc_new(struct hdmi_spec_per_device *per_device, > +int pin_idx, int dev_idx) > { > char name[32]; > - struct hda_codec *codec = per_pin->codec; > + struct hda_codec *codec = per_device->pin->codec; > struct snd_info_entry *entry; > int err; > > - snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, index); > + if (dev_idx == -1) > + snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, pin_idx); > + else > + snprintf(name, sizeof(name), "eld#%d.%d.%d", codec->addr, > pin_idx, > +dev_idx); > err = snd_card_proc_new(codec->card, name, &entry); > if (err < 0) > return err; > > - snd_info_set_text_ops(entry, per_pin, print_eld_info); > - entry->c.text.write = write_eld_info; > + snd_info_set_text_ops(entry, per_device, print_eld_info_device); > + entry->c.text.write = write_eld_info_device; > entry->mode |= S_IWUSR; > - per_pin->proc_entry = entry; > + per_device->proc_entry = entry; > > return 0; > } > > -static void eld_proc_free(struct hdmi_spec_per_pin *per_pin) > +static void eld_device_proc_free(struct hdmi_spec_per_device > +*per_device) > { > - if (!per_pin->codec->bus->shutdown && per_pin->proc_entry) { > - snd_device_free(per_pin->codec->card, per_pin->proc_entry); > - per_pin->proc_entry = NULL; > + if (!per_device->pin->codec->bus->shutdown && per_device->proc_entry) > { > + snd_device_free(per_device->pin->codec->card, > per_device->proc_entry); > + per_device->proc_entry = NULL; > } > } > #else > -static inline int eld_proc_new(struct hdmi_spec_per_pin *per_pin, > - int index) > +static inline int eld_device_proc_new(struct hdmi_spec_per_device > *per_device, > + int pin_idx, int dev_idx) > { > return 0; > } > -static inline void eld_proc_free(struct hdmi_spec_per_pin *per_pin) > +static inline void eld_device_proc_free(struct hdmi_spec_per_device > +*per_device) > { > } > #endif > @@ -1112,13 +1127,13 @@ static void hdmi_pin_setup_infoframe(struct > hda_codec *codec, > > static void hdmi_setup_audio_infoframe(struct hda_codec *codec, > struct hdmi_spec_per_pin *per_pin, > + struct hdmi_eld *eld, > bool non_pcm) > { > struct hdmi_spec *spec = codec->spec; > hda_nid_t pin_nid = per_pin->pin_nid; > int channels = per_pin->channels; > int active_channels; > - struct hdmi_eld *eld; > int ca, ordered_ca; > > if (!channels) > @@ -1129,7 +1144,8 @@ static void hdmi_setup_audio_infoframe(struct > hda_codec *codec, > AC_VERB_SET_AMP_GAIN_MUTE, > AMP_OUT_UNMUTE); > > - eld = &per_pin->sink_eld; > + if (!eld) > + eld = &per_pin->devices[0].sink_eld; > > if (!non_pcm && per_pin->chmap_set) > ca = hdmi_manual_channel_allocation(channels, per_pin->chmap); > @@ -1191,7 +1207,7 @@ static void hdmi_intrinsic_event(struct hda_codec > *codec, unsigned int res) > return; > jack->jack_dirty = 1; > > - codec_dbg(codec, > + codec_info(codec, > "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d > Presence_Detect=%d ELD_Valid=%d\n", > codec->addr, jack->nid, dev_entry, !!(res & AC_UNSOL_RES_IA), > !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); @@ > -1449,7 +1465,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream > *hinfo, > if (snd_BUG_ON(pin_idx < 0)) > return -EINVAL; > per_pin = get_pin(spec, pin_idx); > - eld = &per_pin->sink_eld; > + eld = &per_pin->devices[0].sink_eld; > > err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx); > if (err < 0) > @@ -1530,7 +1546,7 @@ static bool hdmi_present_sense(struct > hdmi_spec_per_pin *per_pin, int repoll) > struct hda_codec *codec = per_pin->codec; > struct hdmi_spec *spec = codec->spec; > struct hdmi_eld *eld = &spec->temp_eld; > - struct hdmi_eld *pin_eld = &per_pin->sink_eld; > + struct hdmi_eld *pin_eld; > hda_nid_t pin_nid = per_pin->pin_nid; > /* > * Always execute a GetPinSense verb here, even when called from @@ > -1544,20 +1560,41 @@ static bool hdmi_present_sense(struct > hdmi_spec_per_pin *per_pin, int repoll) > bool update_eld = false; > bool eld_changed = false; > bool ret; > + int device_num = 0; > + bool need_repoll = false; > + bool any_eld_valid = false; > > snd_hda_power_up_pm(codec); > present = snd_hda_pin_sense(codec, pin_nid); > > mutex_lock(&per_pin->lock); > - pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); > - if (pin_eld->monitor_present) > - eld->eld_valid = !!(present & AC_PINSENSE_ELDV); > - else > - eld->eld_valid = false; > > - codec_dbg(codec, > - "HDMI status: Codec=%d Pin=%d Presence_Detect=%d > ELD_Valid=%d\n", > - codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid); > + if (codec->dp_mst) > + per_pin->num_devices = snd_hda_get_devices(codec, pin_nid, > per_pin->dev_list, > + AC_MAX_DEV_LIST_LEN); > +next_device: > + pin_eld = &per_pin->devices[device_num].sink_eld; > + eld_changed = false; > + update_eld = false; > + if (per_pin->num_devices) { > + pin_eld->monitor_present = !!(per_pin->dev_list[device_num] & > AC_DE_PD); > + if (pin_eld->monitor_present) > + eld->eld_valid = !!(per_pin->dev_list[device_num] & > AC_DE_ELDV); > + else > + eld->eld_valid = false; > + if (eld->eld_valid) > + snd_hda_codec_write(codec, pin_nid, 0, > AC_VERB_SET_DEVICE_SEL, device_num); > + } else { > + pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); > + if (pin_eld->monitor_present) > + eld->eld_valid = !!(present & AC_PINSENSE_ELDV); > + else > + eld->eld_valid = false; > + } > + > + codec_info(codec, > + "HDMI status: Codec=%d Pin=%d Device=%d Presence_Detect=%d > ELD_Valid=%d\n", > + codec->addr, pin_nid, device_num, pin_eld->monitor_present, > +eld->eld_valid); > > if (eld->eld_valid) { > if (spec->ops.pin_get_eld(codec, pin_nid, eld->eld_buffer, @@ > -1573,11 +1610,11 @@ static bool hdmi_present_sense(struct > hdmi_spec_per_pin *per_pin, int repoll) > if (eld->eld_valid) { > snd_hdmi_show_eld(codec, &eld->info); > update_eld = true; > + any_eld_valid = true; > } > else if (repoll) { > - schedule_delayed_work(&per_pin->work, > - msecs_to_jiffies(300)); > - goto unlock; > + need_repoll = true; > + goto skip_to_next_device; > } > } > > @@ -1614,7 +1651,7 @@ static bool hdmi_present_sense(struct > hdmi_spec_per_pin *per_pin, int repoll) > per_pin->mux_idx); > } > > - hdmi_setup_audio_infoframe(codec, per_pin, > + hdmi_setup_audio_infoframe(codec, per_pin, eld, > per_pin->non_pcm); > } > } > @@ -1623,8 +1660,19 @@ static bool hdmi_present_sense(struct > hdmi_spec_per_pin *per_pin, int repoll) > snd_ctl_notify(codec->card, > SNDRV_CTL_EVENT_MASK_VALUE | > SNDRV_CTL_EVENT_MASK_INFO, > &per_pin->eld_ctl->id); > - unlock: > - ret = !repoll || !pin_eld->monitor_present || pin_eld->eld_valid; > +skip_to_next_device: > + if (codec->dp_mst) { > + device_num++; > + if (device_num < per_pin->num_devices) > + goto next_device; > + } > + > + if (need_repoll) { > + schedule_delayed_work(&per_pin->work, > + msecs_to_jiffies(300)); > + repoll = true; > + } > + ret = !repoll || any_eld_valid; > > jack = snd_hda_jack_tbl_get(codec, pin_nid); > if (jack) > @@ -1807,7 +1855,7 @@ static int > generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, > per_pin->channels = substream->runtime->channels; > per_pin->setup = true; > > - hdmi_setup_audio_infoframe(codec, per_pin, non_pcm); > + hdmi_setup_audio_infoframe(codec, per_pin, NULL, non_pcm); > mutex_unlock(&per_pin->lock); > > if (spec->dyn_pin_out) { > @@ -2035,7 +2083,7 @@ static int hdmi_chmap_ctl_put(struct snd_kcontrol > *kcontrol, > per_pin->chmap_set = true; > memcpy(per_pin->chmap, chmap, sizeof(chmap)); > if (prepared) > - hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); > + hdmi_setup_audio_infoframe(codec, per_pin, NULL, > per_pin->non_pcm); > mutex_unlock(&per_pin->lock); > > return 0; > @@ -2147,7 +2195,7 @@ static int generic_hdmi_build_controls(struct > hda_codec *codec) static int generic_hdmi_init_per_pins(struct hda_codec > *codec) { > struct hdmi_spec *spec = codec->spec; > - int pin_idx; > + int pin_idx, dev_idx; > > for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { > struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); @@ > -2155,7 +2203,20 @@ static int generic_hdmi_init_per_pins(struct hda_codec > *codec) > per_pin->codec = codec; > mutex_init(&per_pin->lock); > INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld); > - eld_proc_new(per_pin, pin_idx); > + > + if (codec->dp_mst) { > + for (dev_idx = 0; dev_idx < HDA_MAX_DEVICES; dev_idx++) { > + per_pin->devices[dev_idx].device_idx = dev_idx; > + per_pin->devices[dev_idx].pin = per_pin; > + > + eld_device_proc_new(&per_pin->devices[dev_idx], pin_idx, > dev_idx); > + } > + } else { > + per_pin->num_devices = 0; > + per_pin->devices[0].device_idx = 0; > + per_pin->devices[0].pin = per_pin; > + eld_device_proc_new(&per_pin->devices[0], pin_idx, -1); > + } > } > return 0; > } > @@ -2191,13 +2252,19 @@ static void hdmi_array_free(struct hdmi_spec > *spec) static void generic_hdmi_free(struct hda_codec *codec) { > struct hdmi_spec *spec = codec->spec; > - int pin_idx; > + int pin_idx, dev_idx; > > for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { > struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); > > cancel_delayed_work_sync(&per_pin->work); > - eld_proc_free(per_pin); > + if (per_pin->num_devices) { > + for (dev_idx = 0; dev_idx < per_pin->num_devices; dev_idx++) { > + struct hdmi_spec_per_device *per_device = > &per_pin->devices[dev_idx]; > + eld_device_proc_free(per_device); > + } > + } else > + eld_device_proc_free(&per_pin->devices[0]); > } > > hdmi_array_free(spec); > @@ -2333,6 +2400,7 @@ static int patch_generic_hdmi(struct hda_codec > *codec) > if (is_haswell_plus(codec)) { > intel_haswell_enable_all_pins(codec, true); > intel_haswell_fixup_enable_dp12(codec); > + codec->dp_mst = true; > } > > if (is_haswell_plus(codec) || is_valleyview_plus(codec)) @@ -2346,7 > +2414,6 @@ static int patch_generic_hdmi(struct hda_codec *codec) > codec->patch_ops = generic_hdmi_patch_ops; > if (is_haswell_plus(codec)) { > codec->patch_ops.set_power_state = haswell_set_power_state; > - codec->dp_mst = true; > } > > generic_hdmi_init_per_pins(codec); > -- > 2.4.1 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > Hi Takashi/Dave, > > Shall we move or cc this discussion on audio driver side to ALSA ML? Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > I think we also need to decide how to manage PCM devices for DP MST. > Now the HD-A driver create a PCM device for each pin, and the substream > number is 1 for each PCM. Now with DP MST enabled, each pin can support > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > There may be 2 options: > -#1: Let an HDMI codec specify number of substreams, same as the number > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > vendors can also specify a value according to actual HW capabilities. > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > (for 3 display pipelines), so we can open up to 3 substreams at the same > time. When the audio driver finds all 3 convertors are used when opening > a new substream, it will fail. One thing I noticed is the number of devices on a PIN is only updated when the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when I plug in MST device, I get the 3 devices on port 6. So it seems dynamic enough at this point, though I guess it'll always be 0 or 3. > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > entry which connects to monitor with audio support. When the monitor > is removed, the PCM device will be disconnected, closed and removed, > similar to the USB case. > > This will change ALSA core. But there will be less PCM devices and > substreams, since the number of connected monitors Is decided by the > actual GPU display pipeline. I like this option more, since I think it should be more like USB, but I've no idea how much work it would be from the alsa side, this patch was probably as deep into alsa as I've gone. Dave. >> Signed-off-by: Dave Airlie <airlied@redhat.com> >> --- >> include/sound/hda_verbs.h | 2 + >> sound/pci/hda/hda_codec.c | 1 + >> sound/pci/hda/hda_proc.c | 5 +- >> sound/pci/hda/patch_hdmi.c | 181 >> +++++++++++++++++++++++++++++++-------------- >> 4 files changed, 131 insertions(+), 58 deletions(-) >> >> diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h index >> d0509db..3b62ac5 100644 >> --- a/include/sound/hda_verbs.h >> +++ b/include/sound/hda_verbs.h >> @@ -75,6 +75,7 @@ enum { >> #define AC_VERB_GET_HDMI_CHAN_SLOT 0x0f34 >> #define AC_VERB_GET_DEVICE_SEL 0xf35 >> #define AC_VERB_GET_DEVICE_LIST 0xf36 >> +#define AC_VERB_GET_DP_STREAM_ID 0xf3c >> >> /* >> * SET verbs >> @@ -115,6 +116,7 @@ enum { >> #define AC_VERB_SET_HDMI_CP_CTRL 0x733 >> #define AC_VERB_SET_HDMI_CHAN_SLOT 0x734 >> #define AC_VERB_SET_DEVICE_SEL 0x735 >> +#define AC_VERB_SET_DP_STREAM_ID 0x73C >> >> /* >> * Parameter IDs >> diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index >> 5645481..3981c63 100644 >> --- a/sound/pci/hda/hda_codec.c >> +++ b/sound/pci/hda/hda_codec.c >> @@ -482,6 +482,7 @@ int snd_hda_get_devices(struct hda_codec *codec, >> hda_nid_t nid, >> } >> return devices; >> } >> +EXPORT_SYMBOL_GPL(snd_hda_get_devices); >> >> /* >> * destructor >> diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index >> baaf7ed0..39fac53 100644 >> --- a/sound/pci/hda/hda_proc.c >> +++ b/sound/pci/hda/hda_proc.c >> @@ -644,10 +644,13 @@ static void print_device_list(struct snd_info_buffer >> *buffer, >> int i, curr = -1; >> u8 dev_list[AC_MAX_DEV_LIST_LEN]; >> int devlist_len; >> + int dp_s_id; >> >> + dp_s_id = snd_hda_codec_read(codec, nid, 0, >> + AC_VERB_GET_DP_STREAM_ID, 0); >> devlist_len = snd_hda_get_devices(codec, nid, dev_list, >> AC_MAX_DEV_LIST_LEN); >> - snd_iprintf(buffer, " Devices: %d\n", devlist_len); >> + snd_iprintf(buffer, " Devices: %d: 0x%x\n", devlist_len, dp_s_id); >> if (devlist_len <= 0) >> return; >> >> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index >> 5f44f60..8272656 100644 >> --- a/sound/pci/hda/patch_hdmi.c >> +++ b/sound/pci/hda/patch_hdmi.c >> @@ -68,6 +68,17 @@ struct hdmi_spec_per_cvt { >> /* max. connections to a widget */ >> #define HDA_MAX_CONNECTIONS 32 >> >> +struct hdmi_spec_per_pin; >> +#define HDA_MAX_DEVICES 3 >> +struct hdmi_spec_per_device { >> + struct hdmi_spec_per_pin *pin; >> + int device_idx; >> + struct hdmi_eld sink_eld; >> +#ifdef CONFIG_PROC_FS >> + struct snd_info_entry *proc_entry; >> +#endif >> +}; >> + >> struct hdmi_spec_per_pin { >> hda_nid_t pin_nid; >> int num_mux_nids; >> @@ -76,7 +87,11 @@ struct hdmi_spec_per_pin { >> hda_nid_t cvt_nid; >> >> struct hda_codec *codec; >> - struct hdmi_eld sink_eld; >> + >> + int num_devices; >> + u8 dev_list[AC_MAX_DEV_LIST_LEN]; >> + struct hdmi_spec_per_device devices[HDA_MAX_DEVICES]; >> + >> struct mutex lock; >> struct delayed_work work; >> struct snd_kcontrol *eld_ctl; >> @@ -86,9 +101,6 @@ struct hdmi_spec_per_pin { >> bool non_pcm; >> bool chmap_set; /* channel-map override by ALSA API? */ >> unsigned char chmap[8]; /* ALSA API channel-map */ -#ifdef >> CONFIG_PROC_FS >> - struct snd_info_entry *proc_entry; >> -#endif >> }; >> >> struct cea_channel_speaker_allocation; >> @@ -409,7 +421,7 @@ static int hdmi_eld_ctl_info(struct snd_kcontrol >> *kcontrol, >> >> pin_idx = kcontrol->private_value; >> per_pin = get_pin(spec, pin_idx); >> - eld = &per_pin->sink_eld; >> + eld = &per_pin->devices[0].sink_eld; >> >> mutex_lock(&per_pin->lock); >> uinfo->count = eld->eld_valid ? eld->eld_size : 0; @@ -429,7 +441,7 @@ >> static int hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol, >> >> pin_idx = kcontrol->private_value; >> per_pin = get_pin(spec, pin_idx); >> - eld = &per_pin->sink_eld; >> + eld = &per_pin->devices[0].sink_eld; >> >> mutex_lock(&per_pin->lock); >> if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data)) { @@ -549,60 >> +561,63 @@ static void hdmi_set_channel_count(struct hda_codec *codec, >> */ >> >> #ifdef CONFIG_PROC_FS >> -static void print_eld_info(struct snd_info_entry *entry, >> - struct snd_info_buffer *buffer) >> +static void print_eld_info_device(struct snd_info_entry *entry, >> + struct snd_info_buffer *buffer) >> { >> - struct hdmi_spec_per_pin *per_pin = entry->private_data; >> + struct hdmi_spec_per_device *per_device = entry->private_data; >> >> - mutex_lock(&per_pin->lock); >> - snd_hdmi_print_eld_info(&per_pin->sink_eld, buffer); >> - mutex_unlock(&per_pin->lock); >> + mutex_lock(&per_device->pin->lock); >> + snd_hdmi_print_eld_info(&per_device->sink_eld, buffer); >> + mutex_unlock(&per_device->pin->lock); >> } >> >> -static void write_eld_info(struct snd_info_entry *entry, >> - struct snd_info_buffer *buffer) >> +static void write_eld_info_device(struct snd_info_entry *entry, >> + struct snd_info_buffer *buffer) >> { >> - struct hdmi_spec_per_pin *per_pin = entry->private_data; >> + struct hdmi_spec_per_device *per_device = entry->private_data; >> >> - mutex_lock(&per_pin->lock); >> - snd_hdmi_write_eld_info(&per_pin->sink_eld, buffer); >> - mutex_unlock(&per_pin->lock); >> + mutex_lock(&per_device->pin->lock); >> + snd_hdmi_write_eld_info(&per_device->sink_eld, buffer); >> + mutex_unlock(&per_device->pin->lock); >> } >> >> -static int eld_proc_new(struct hdmi_spec_per_pin *per_pin, int index) >> +static int eld_device_proc_new(struct hdmi_spec_per_device *per_device, >> +int pin_idx, int dev_idx) >> { >> char name[32]; >> - struct hda_codec *codec = per_pin->codec; >> + struct hda_codec *codec = per_device->pin->codec; >> struct snd_info_entry *entry; >> int err; >> >> - snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, index); >> + if (dev_idx == -1) >> + snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, pin_idx); >> + else >> + snprintf(name, sizeof(name), "eld#%d.%d.%d", codec->addr, >> pin_idx, >> +dev_idx); >> err = snd_card_proc_new(codec->card, name, &entry); >> if (err < 0) >> return err; >> >> - snd_info_set_text_ops(entry, per_pin, print_eld_info); >> - entry->c.text.write = write_eld_info; >> + snd_info_set_text_ops(entry, per_device, print_eld_info_device); >> + entry->c.text.write = write_eld_info_device; >> entry->mode |= S_IWUSR; >> - per_pin->proc_entry = entry; >> + per_device->proc_entry = entry; >> >> return 0; >> } >> >> -static void eld_proc_free(struct hdmi_spec_per_pin *per_pin) >> +static void eld_device_proc_free(struct hdmi_spec_per_device >> +*per_device) >> { >> - if (!per_pin->codec->bus->shutdown && per_pin->proc_entry) { >> - snd_device_free(per_pin->codec->card, per_pin->proc_entry); >> - per_pin->proc_entry = NULL; >> + if (!per_device->pin->codec->bus->shutdown && per_device->proc_entry) >> { >> + snd_device_free(per_device->pin->codec->card, >> per_device->proc_entry); >> + per_device->proc_entry = NULL; >> } >> } >> #else >> -static inline int eld_proc_new(struct hdmi_spec_per_pin *per_pin, >> - int index) >> +static inline int eld_device_proc_new(struct hdmi_spec_per_device >> *per_device, >> + int pin_idx, int dev_idx) >> { >> return 0; >> } >> -static inline void eld_proc_free(struct hdmi_spec_per_pin *per_pin) >> +static inline void eld_device_proc_free(struct hdmi_spec_per_device >> +*per_device) >> { >> } >> #endif >> @@ -1112,13 +1127,13 @@ static void hdmi_pin_setup_infoframe(struct >> hda_codec *codec, >> >> static void hdmi_setup_audio_infoframe(struct hda_codec *codec, >> struct hdmi_spec_per_pin *per_pin, >> + struct hdmi_eld *eld, >> bool non_pcm) >> { >> struct hdmi_spec *spec = codec->spec; >> hda_nid_t pin_nid = per_pin->pin_nid; >> int channels = per_pin->channels; >> int active_channels; >> - struct hdmi_eld *eld; >> int ca, ordered_ca; >> >> if (!channels) >> @@ -1129,7 +1144,8 @@ static void hdmi_setup_audio_infoframe(struct >> hda_codec *codec, >> AC_VERB_SET_AMP_GAIN_MUTE, >> AMP_OUT_UNMUTE); >> >> - eld = &per_pin->sink_eld; >> + if (!eld) >> + eld = &per_pin->devices[0].sink_eld; >> >> if (!non_pcm && per_pin->chmap_set) >> ca = hdmi_manual_channel_allocation(channels, per_pin->chmap); >> @@ -1191,7 +1207,7 @@ static void hdmi_intrinsic_event(struct hda_codec >> *codec, unsigned int res) >> return; >> jack->jack_dirty = 1; >> >> - codec_dbg(codec, >> + codec_info(codec, >> "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d >> Presence_Detect=%d ELD_Valid=%d\n", >> codec->addr, jack->nid, dev_entry, !!(res & AC_UNSOL_RES_IA), >> !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); @@ >> -1449,7 +1465,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream >> *hinfo, >> if (snd_BUG_ON(pin_idx < 0)) >> return -EINVAL; >> per_pin = get_pin(spec, pin_idx); >> - eld = &per_pin->sink_eld; >> + eld = &per_pin->devices[0].sink_eld; >> >> err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx); >> if (err < 0) >> @@ -1530,7 +1546,7 @@ static bool hdmi_present_sense(struct >> hdmi_spec_per_pin *per_pin, int repoll) >> struct hda_codec *codec = per_pin->codec; >> struct hdmi_spec *spec = codec->spec; >> struct hdmi_eld *eld = &spec->temp_eld; >> - struct hdmi_eld *pin_eld = &per_pin->sink_eld; >> + struct hdmi_eld *pin_eld; >> hda_nid_t pin_nid = per_pin->pin_nid; >> /* >> * Always execute a GetPinSense verb here, even when called from @@ >> -1544,20 +1560,41 @@ static bool hdmi_present_sense(struct >> hdmi_spec_per_pin *per_pin, int repoll) >> bool update_eld = false; >> bool eld_changed = false; >> bool ret; >> + int device_num = 0; >> + bool need_repoll = false; >> + bool any_eld_valid = false; >> >> snd_hda_power_up_pm(codec); >> present = snd_hda_pin_sense(codec, pin_nid); >> >> mutex_lock(&per_pin->lock); >> - pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); >> - if (pin_eld->monitor_present) >> - eld->eld_valid = !!(present & AC_PINSENSE_ELDV); >> - else >> - eld->eld_valid = false; >> >> - codec_dbg(codec, >> - "HDMI status: Codec=%d Pin=%d Presence_Detect=%d >> ELD_Valid=%d\n", >> - codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid); >> + if (codec->dp_mst) >> + per_pin->num_devices = snd_hda_get_devices(codec, pin_nid, >> per_pin->dev_list, >> + AC_MAX_DEV_LIST_LEN); >> +next_device: >> + pin_eld = &per_pin->devices[device_num].sink_eld; >> + eld_changed = false; >> + update_eld = false; >> + if (per_pin->num_devices) { >> + pin_eld->monitor_present = !!(per_pin->dev_list[device_num] & >> AC_DE_PD); >> + if (pin_eld->monitor_present) >> + eld->eld_valid = !!(per_pin->dev_list[device_num] & >> AC_DE_ELDV); >> + else >> + eld->eld_valid = false; >> + if (eld->eld_valid) >> + snd_hda_codec_write(codec, pin_nid, 0, >> AC_VERB_SET_DEVICE_SEL, device_num); >> + } else { >> + pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); >> + if (pin_eld->monitor_present) >> + eld->eld_valid = !!(present & AC_PINSENSE_ELDV); >> + else >> + eld->eld_valid = false; >> + } >> + >> + codec_info(codec, >> + "HDMI status: Codec=%d Pin=%d Device=%d Presence_Detect=%d >> ELD_Valid=%d\n", >> + codec->addr, pin_nid, device_num, pin_eld->monitor_present, >> +eld->eld_valid); >> >> if (eld->eld_valid) { >> if (spec->ops.pin_get_eld(codec, pin_nid, eld->eld_buffer, @@ >> -1573,11 +1610,11 @@ static bool hdmi_present_sense(struct >> hdmi_spec_per_pin *per_pin, int repoll) >> if (eld->eld_valid) { >> snd_hdmi_show_eld(codec, &eld->info); >> update_eld = true; >> + any_eld_valid = true; >> } >> else if (repoll) { >> - schedule_delayed_work(&per_pin->work, >> - msecs_to_jiffies(300)); >> - goto unlock; >> + need_repoll = true; >> + goto skip_to_next_device; >> } >> } >> >> @@ -1614,7 +1651,7 @@ static bool hdmi_present_sense(struct >> hdmi_spec_per_pin *per_pin, int repoll) >> per_pin->mux_idx); >> } >> >> - hdmi_setup_audio_infoframe(codec, per_pin, >> + hdmi_setup_audio_infoframe(codec, per_pin, eld, >> per_pin->non_pcm); >> } >> } >> @@ -1623,8 +1660,19 @@ static bool hdmi_present_sense(struct >> hdmi_spec_per_pin *per_pin, int repoll) >> snd_ctl_notify(codec->card, >> SNDRV_CTL_EVENT_MASK_VALUE | >> SNDRV_CTL_EVENT_MASK_INFO, >> &per_pin->eld_ctl->id); >> - unlock: >> - ret = !repoll || !pin_eld->monitor_present || pin_eld->eld_valid; >> +skip_to_next_device: >> + if (codec->dp_mst) { >> + device_num++; >> + if (device_num < per_pin->num_devices) >> + goto next_device; >> + } >> + >> + if (need_repoll) { >> + schedule_delayed_work(&per_pin->work, >> + msecs_to_jiffies(300)); >> + repoll = true; >> + } >> + ret = !repoll || any_eld_valid; >> >> jack = snd_hda_jack_tbl_get(codec, pin_nid); >> if (jack) >> @@ -1807,7 +1855,7 @@ static int >> generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, >> per_pin->channels = substream->runtime->channels; >> per_pin->setup = true; >> >> - hdmi_setup_audio_infoframe(codec, per_pin, non_pcm); >> + hdmi_setup_audio_infoframe(codec, per_pin, NULL, non_pcm); >> mutex_unlock(&per_pin->lock); >> >> if (spec->dyn_pin_out) { >> @@ -2035,7 +2083,7 @@ static int hdmi_chmap_ctl_put(struct snd_kcontrol >> *kcontrol, >> per_pin->chmap_set = true; >> memcpy(per_pin->chmap, chmap, sizeof(chmap)); >> if (prepared) >> - hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); >> + hdmi_setup_audio_infoframe(codec, per_pin, NULL, >> per_pin->non_pcm); >> mutex_unlock(&per_pin->lock); >> >> return 0; >> @@ -2147,7 +2195,7 @@ static int generic_hdmi_build_controls(struct >> hda_codec *codec) static int generic_hdmi_init_per_pins(struct hda_codec >> *codec) { >> struct hdmi_spec *spec = codec->spec; >> - int pin_idx; >> + int pin_idx, dev_idx; >> >> for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { >> struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); @@ >> -2155,7 +2203,20 @@ static int generic_hdmi_init_per_pins(struct hda_codec >> *codec) >> per_pin->codec = codec; >> mutex_init(&per_pin->lock); >> INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld); >> - eld_proc_new(per_pin, pin_idx); >> + >> + if (codec->dp_mst) { >> + for (dev_idx = 0; dev_idx < HDA_MAX_DEVICES; dev_idx++) { >> + per_pin->devices[dev_idx].device_idx = dev_idx; >> + per_pin->devices[dev_idx].pin = per_pin; >> + >> + eld_device_proc_new(&per_pin->devices[dev_idx], pin_idx, >> dev_idx); >> + } >> + } else { >> + per_pin->num_devices = 0; >> + per_pin->devices[0].device_idx = 0; >> + per_pin->devices[0].pin = per_pin; >> + eld_device_proc_new(&per_pin->devices[0], pin_idx, -1); >> + } >> } >> return 0; >> } >> @@ -2191,13 +2252,19 @@ static void hdmi_array_free(struct hdmi_spec >> *spec) static void generic_hdmi_free(struct hda_codec *codec) { >> struct hdmi_spec *spec = codec->spec; >> - int pin_idx; >> + int pin_idx, dev_idx; >> >> for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { >> struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); >> >> cancel_delayed_work_sync(&per_pin->work); >> - eld_proc_free(per_pin); >> + if (per_pin->num_devices) { >> + for (dev_idx = 0; dev_idx < per_pin->num_devices; dev_idx++) { >> + struct hdmi_spec_per_device *per_device = >> &per_pin->devices[dev_idx]; >> + eld_device_proc_free(per_device); >> + } >> + } else >> + eld_device_proc_free(&per_pin->devices[0]); >> } >> >> hdmi_array_free(spec); >> @@ -2333,6 +2400,7 @@ static int patch_generic_hdmi(struct hda_codec >> *codec) >> if (is_haswell_plus(codec)) { >> intel_haswell_enable_all_pins(codec, true); >> intel_haswell_fixup_enable_dp12(codec); >> + codec->dp_mst = true; >> } >> >> if (is_haswell_plus(codec) || is_valleyview_plus(codec)) @@ -2346,7 >> +2414,6 @@ static int patch_generic_hdmi(struct hda_codec *codec) >> codec->patch_ops = generic_hdmi_patch_ops; >> if (is_haswell_plus(codec)) { >> codec->patch_ops.set_power_state = haswell_set_power_state; >> - codec->dp_mst = true; >> } >> >> generic_hdmi_init_per_pins(codec); >> -- >> 2.4.1 >> >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
At Fri, 19 Jun 2015 20:33:39 +1000, Dave Airlie wrote: > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > Hi Takashi/Dave, > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > I think we also need to decide how to manage PCM devices for DP MST. > > Now the HD-A driver create a PCM device for each pin, and the substream > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > There may be 2 options: > > -#1: Let an HDMI codec specify number of substreams, same as the number > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > vendors can also specify a value according to actual HW capabilities. > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > time. When the audio driver finds all 3 convertors are used when opening > > a new substream, it will fail. > > One thing I noticed is the number of devices on a PIN is only updated when > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > enough at this point, though I guess it'll always be 0 or 3. > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > entry which connects to monitor with audio support. When the monitor > > is removed, the PCM device will be disconnected, closed and removed, > > similar to the USB case. > > > > This will change ALSA core. But there will be less PCM devices and > > substreams, since the number of connected monitors Is decided by the > > actual GPU display pipeline. > > I like this option more, since I think it should be more like USB, but I've > no idea how much work it would be from the alsa side, this patch was > probably as deep into alsa as I've gone. Two things have to be considered for compatibility: - ELD, channel map and jack detection: these are created per PCM device, and extending to substream would confuse user space a lot. In theory, it can be extended using subdevice number, but in anyway this won't work with PulseAudio as is. - The per-pin assignment provides a more or less persistent route to a certain device. Changing the assignment method may break the previous setup. Also, the dynamic PCM creation / removal is an issue that has been discussed many times. Unfortunately it won't work as is, at lest for PA. Currently PA does probing of devices only at the card probe time. The hotplug of USB-audio works because it's always tied with the card. But in this case, the card remains while only the PCM devices will be created / removed, thus the probe in PA won't be triggered. Takashi > > Dave. > > >> Signed-off-by: Dave Airlie <airlied@redhat.com> > >> --- > >> include/sound/hda_verbs.h | 2 + > >> sound/pci/hda/hda_codec.c | 1 + > >> sound/pci/hda/hda_proc.c | 5 +- > >> sound/pci/hda/patch_hdmi.c | 181 > >> +++++++++++++++++++++++++++++++-------------- > >> 4 files changed, 131 insertions(+), 58 deletions(-) > >> > >> diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h index > >> d0509db..3b62ac5 100644 > >> --- a/include/sound/hda_verbs.h > >> +++ b/include/sound/hda_verbs.h > >> @@ -75,6 +75,7 @@ enum { > >> #define AC_VERB_GET_HDMI_CHAN_SLOT 0x0f34 > >> #define AC_VERB_GET_DEVICE_SEL 0xf35 > >> #define AC_VERB_GET_DEVICE_LIST 0xf36 > >> +#define AC_VERB_GET_DP_STREAM_ID 0xf3c > >> > >> /* > >> * SET verbs > >> @@ -115,6 +116,7 @@ enum { > >> #define AC_VERB_SET_HDMI_CP_CTRL 0x733 > >> #define AC_VERB_SET_HDMI_CHAN_SLOT 0x734 > >> #define AC_VERB_SET_DEVICE_SEL 0x735 > >> +#define AC_VERB_SET_DP_STREAM_ID 0x73C > >> > >> /* > >> * Parameter IDs > >> diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index > >> 5645481..3981c63 100644 > >> --- a/sound/pci/hda/hda_codec.c > >> +++ b/sound/pci/hda/hda_codec.c > >> @@ -482,6 +482,7 @@ int snd_hda_get_devices(struct hda_codec *codec, > >> hda_nid_t nid, > >> } > >> return devices; > >> } > >> +EXPORT_SYMBOL_GPL(snd_hda_get_devices); > >> > >> /* > >> * destructor > >> diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index > >> baaf7ed0..39fac53 100644 > >> --- a/sound/pci/hda/hda_proc.c > >> +++ b/sound/pci/hda/hda_proc.c > >> @@ -644,10 +644,13 @@ static void print_device_list(struct snd_info_buffer > >> *buffer, > >> int i, curr = -1; > >> u8 dev_list[AC_MAX_DEV_LIST_LEN]; > >> int devlist_len; > >> + int dp_s_id; > >> > >> + dp_s_id = snd_hda_codec_read(codec, nid, 0, > >> + AC_VERB_GET_DP_STREAM_ID, 0); > >> devlist_len = snd_hda_get_devices(codec, nid, dev_list, > >> AC_MAX_DEV_LIST_LEN); > >> - snd_iprintf(buffer, " Devices: %d\n", devlist_len); > >> + snd_iprintf(buffer, " Devices: %d: 0x%x\n", devlist_len, dp_s_id); > >> if (devlist_len <= 0) > >> return; > >> > >> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index > >> 5f44f60..8272656 100644 > >> --- a/sound/pci/hda/patch_hdmi.c > >> +++ b/sound/pci/hda/patch_hdmi.c > >> @@ -68,6 +68,17 @@ struct hdmi_spec_per_cvt { > >> /* max. connections to a widget */ > >> #define HDA_MAX_CONNECTIONS 32 > >> > >> +struct hdmi_spec_per_pin; > >> +#define HDA_MAX_DEVICES 3 > >> +struct hdmi_spec_per_device { > >> + struct hdmi_spec_per_pin *pin; > >> + int device_idx; > >> + struct hdmi_eld sink_eld; > >> +#ifdef CONFIG_PROC_FS > >> + struct snd_info_entry *proc_entry; > >> +#endif > >> +}; > >> + > >> struct hdmi_spec_per_pin { > >> hda_nid_t pin_nid; > >> int num_mux_nids; > >> @@ -76,7 +87,11 @@ struct hdmi_spec_per_pin { > >> hda_nid_t cvt_nid; > >> > >> struct hda_codec *codec; > >> - struct hdmi_eld sink_eld; > >> + > >> + int num_devices; > >> + u8 dev_list[AC_MAX_DEV_LIST_LEN]; > >> + struct hdmi_spec_per_device devices[HDA_MAX_DEVICES]; > >> + > >> struct mutex lock; > >> struct delayed_work work; > >> struct snd_kcontrol *eld_ctl; > >> @@ -86,9 +101,6 @@ struct hdmi_spec_per_pin { > >> bool non_pcm; > >> bool chmap_set; /* channel-map override by ALSA API? */ > >> unsigned char chmap[8]; /* ALSA API channel-map */ -#ifdef > >> CONFIG_PROC_FS > >> - struct snd_info_entry *proc_entry; > >> -#endif > >> }; > >> > >> struct cea_channel_speaker_allocation; > >> @@ -409,7 +421,7 @@ static int hdmi_eld_ctl_info(struct snd_kcontrol > >> *kcontrol, > >> > >> pin_idx = kcontrol->private_value; > >> per_pin = get_pin(spec, pin_idx); > >> - eld = &per_pin->sink_eld; > >> + eld = &per_pin->devices[0].sink_eld; > >> > >> mutex_lock(&per_pin->lock); > >> uinfo->count = eld->eld_valid ? eld->eld_size : 0; @@ -429,7 +441,7 @@ > >> static int hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol, > >> > >> pin_idx = kcontrol->private_value; > >> per_pin = get_pin(spec, pin_idx); > >> - eld = &per_pin->sink_eld; > >> + eld = &per_pin->devices[0].sink_eld; > >> > >> mutex_lock(&per_pin->lock); > >> if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data)) { @@ -549,60 > >> +561,63 @@ static void hdmi_set_channel_count(struct hda_codec *codec, > >> */ > >> > >> #ifdef CONFIG_PROC_FS > >> -static void print_eld_info(struct snd_info_entry *entry, > >> - struct snd_info_buffer *buffer) > >> +static void print_eld_info_device(struct snd_info_entry *entry, > >> + struct snd_info_buffer *buffer) > >> { > >> - struct hdmi_spec_per_pin *per_pin = entry->private_data; > >> + struct hdmi_spec_per_device *per_device = entry->private_data; > >> > >> - mutex_lock(&per_pin->lock); > >> - snd_hdmi_print_eld_info(&per_pin->sink_eld, buffer); > >> - mutex_unlock(&per_pin->lock); > >> + mutex_lock(&per_device->pin->lock); > >> + snd_hdmi_print_eld_info(&per_device->sink_eld, buffer); > >> + mutex_unlock(&per_device->pin->lock); > >> } > >> > >> -static void write_eld_info(struct snd_info_entry *entry, > >> - struct snd_info_buffer *buffer) > >> +static void write_eld_info_device(struct snd_info_entry *entry, > >> + struct snd_info_buffer *buffer) > >> { > >> - struct hdmi_spec_per_pin *per_pin = entry->private_data; > >> + struct hdmi_spec_per_device *per_device = entry->private_data; > >> > >> - mutex_lock(&per_pin->lock); > >> - snd_hdmi_write_eld_info(&per_pin->sink_eld, buffer); > >> - mutex_unlock(&per_pin->lock); > >> + mutex_lock(&per_device->pin->lock); > >> + snd_hdmi_write_eld_info(&per_device->sink_eld, buffer); > >> + mutex_unlock(&per_device->pin->lock); > >> } > >> > >> -static int eld_proc_new(struct hdmi_spec_per_pin *per_pin, int index) > >> +static int eld_device_proc_new(struct hdmi_spec_per_device *per_device, > >> +int pin_idx, int dev_idx) > >> { > >> char name[32]; > >> - struct hda_codec *codec = per_pin->codec; > >> + struct hda_codec *codec = per_device->pin->codec; > >> struct snd_info_entry *entry; > >> int err; > >> > >> - snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, index); > >> + if (dev_idx == -1) > >> + snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, pin_idx); > >> + else > >> + snprintf(name, sizeof(name), "eld#%d.%d.%d", codec->addr, > >> pin_idx, > >> +dev_idx); > >> err = snd_card_proc_new(codec->card, name, &entry); > >> if (err < 0) > >> return err; > >> > >> - snd_info_set_text_ops(entry, per_pin, print_eld_info); > >> - entry->c.text.write = write_eld_info; > >> + snd_info_set_text_ops(entry, per_device, print_eld_info_device); > >> + entry->c.text.write = write_eld_info_device; > >> entry->mode |= S_IWUSR; > >> - per_pin->proc_entry = entry; > >> + per_device->proc_entry = entry; > >> > >> return 0; > >> } > >> > >> -static void eld_proc_free(struct hdmi_spec_per_pin *per_pin) > >> +static void eld_device_proc_free(struct hdmi_spec_per_device > >> +*per_device) > >> { > >> - if (!per_pin->codec->bus->shutdown && per_pin->proc_entry) { > >> - snd_device_free(per_pin->codec->card, per_pin->proc_entry); > >> - per_pin->proc_entry = NULL; > >> + if (!per_device->pin->codec->bus->shutdown && per_device->proc_entry) > >> { > >> + snd_device_free(per_device->pin->codec->card, > >> per_device->proc_entry); > >> + per_device->proc_entry = NULL; > >> } > >> } > >> #else > >> -static inline int eld_proc_new(struct hdmi_spec_per_pin *per_pin, > >> - int index) > >> +static inline int eld_device_proc_new(struct hdmi_spec_per_device > >> *per_device, > >> + int pin_idx, int dev_idx) > >> { > >> return 0; > >> } > >> -static inline void eld_proc_free(struct hdmi_spec_per_pin *per_pin) > >> +static inline void eld_device_proc_free(struct hdmi_spec_per_device > >> +*per_device) > >> { > >> } > >> #endif > >> @@ -1112,13 +1127,13 @@ static void hdmi_pin_setup_infoframe(struct > >> hda_codec *codec, > >> > >> static void hdmi_setup_audio_infoframe(struct hda_codec *codec, > >> struct hdmi_spec_per_pin *per_pin, > >> + struct hdmi_eld *eld, > >> bool non_pcm) > >> { > >> struct hdmi_spec *spec = codec->spec; > >> hda_nid_t pin_nid = per_pin->pin_nid; > >> int channels = per_pin->channels; > >> int active_channels; > >> - struct hdmi_eld *eld; > >> int ca, ordered_ca; > >> > >> if (!channels) > >> @@ -1129,7 +1144,8 @@ static void hdmi_setup_audio_infoframe(struct > >> hda_codec *codec, > >> AC_VERB_SET_AMP_GAIN_MUTE, > >> AMP_OUT_UNMUTE); > >> > >> - eld = &per_pin->sink_eld; > >> + if (!eld) > >> + eld = &per_pin->devices[0].sink_eld; > >> > >> if (!non_pcm && per_pin->chmap_set) > >> ca = hdmi_manual_channel_allocation(channels, per_pin->chmap); > >> @@ -1191,7 +1207,7 @@ static void hdmi_intrinsic_event(struct hda_codec > >> *codec, unsigned int res) > >> return; > >> jack->jack_dirty = 1; > >> > >> - codec_dbg(codec, > >> + codec_info(codec, > >> "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d > >> Presence_Detect=%d ELD_Valid=%d\n", > >> codec->addr, jack->nid, dev_entry, !!(res & AC_UNSOL_RES_IA), > >> !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); @@ > >> -1449,7 +1465,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream > >> *hinfo, > >> if (snd_BUG_ON(pin_idx < 0)) > >> return -EINVAL; > >> per_pin = get_pin(spec, pin_idx); > >> - eld = &per_pin->sink_eld; > >> + eld = &per_pin->devices[0].sink_eld; > >> > >> err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx); > >> if (err < 0) > >> @@ -1530,7 +1546,7 @@ static bool hdmi_present_sense(struct > >> hdmi_spec_per_pin *per_pin, int repoll) > >> struct hda_codec *codec = per_pin->codec; > >> struct hdmi_spec *spec = codec->spec; > >> struct hdmi_eld *eld = &spec->temp_eld; > >> - struct hdmi_eld *pin_eld = &per_pin->sink_eld; > >> + struct hdmi_eld *pin_eld; > >> hda_nid_t pin_nid = per_pin->pin_nid; > >> /* > >> * Always execute a GetPinSense verb here, even when called from @@ > >> -1544,20 +1560,41 @@ static bool hdmi_present_sense(struct > >> hdmi_spec_per_pin *per_pin, int repoll) > >> bool update_eld = false; > >> bool eld_changed = false; > >> bool ret; > >> + int device_num = 0; > >> + bool need_repoll = false; > >> + bool any_eld_valid = false; > >> > >> snd_hda_power_up_pm(codec); > >> present = snd_hda_pin_sense(codec, pin_nid); > >> > >> mutex_lock(&per_pin->lock); > >> - pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); > >> - if (pin_eld->monitor_present) > >> - eld->eld_valid = !!(present & AC_PINSENSE_ELDV); > >> - else > >> - eld->eld_valid = false; > >> > >> - codec_dbg(codec, > >> - "HDMI status: Codec=%d Pin=%d Presence_Detect=%d > >> ELD_Valid=%d\n", > >> - codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid); > >> + if (codec->dp_mst) > >> + per_pin->num_devices = snd_hda_get_devices(codec, pin_nid, > >> per_pin->dev_list, > >> + AC_MAX_DEV_LIST_LEN); > >> +next_device: > >> + pin_eld = &per_pin->devices[device_num].sink_eld; > >> + eld_changed = false; > >> + update_eld = false; > >> + if (per_pin->num_devices) { > >> + pin_eld->monitor_present = !!(per_pin->dev_list[device_num] & > >> AC_DE_PD); > >> + if (pin_eld->monitor_present) > >> + eld->eld_valid = !!(per_pin->dev_list[device_num] & > >> AC_DE_ELDV); > >> + else > >> + eld->eld_valid = false; > >> + if (eld->eld_valid) > >> + snd_hda_codec_write(codec, pin_nid, 0, > >> AC_VERB_SET_DEVICE_SEL, device_num); > >> + } else { > >> + pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); > >> + if (pin_eld->monitor_present) > >> + eld->eld_valid = !!(present & AC_PINSENSE_ELDV); > >> + else > >> + eld->eld_valid = false; > >> + } > >> + > >> + codec_info(codec, > >> + "HDMI status: Codec=%d Pin=%d Device=%d Presence_Detect=%d > >> ELD_Valid=%d\n", > >> + codec->addr, pin_nid, device_num, pin_eld->monitor_present, > >> +eld->eld_valid); > >> > >> if (eld->eld_valid) { > >> if (spec->ops.pin_get_eld(codec, pin_nid, eld->eld_buffer, @@ > >> -1573,11 +1610,11 @@ static bool hdmi_present_sense(struct > >> hdmi_spec_per_pin *per_pin, int repoll) > >> if (eld->eld_valid) { > >> snd_hdmi_show_eld(codec, &eld->info); > >> update_eld = true; > >> + any_eld_valid = true; > >> } > >> else if (repoll) { > >> - schedule_delayed_work(&per_pin->work, > >> - msecs_to_jiffies(300)); > >> - goto unlock; > >> + need_repoll = true; > >> + goto skip_to_next_device; > >> } > >> } > >> > >> @@ -1614,7 +1651,7 @@ static bool hdmi_present_sense(struct > >> hdmi_spec_per_pin *per_pin, int repoll) > >> per_pin->mux_idx); > >> } > >> > >> - hdmi_setup_audio_infoframe(codec, per_pin, > >> + hdmi_setup_audio_infoframe(codec, per_pin, eld, > >> per_pin->non_pcm); > >> } > >> } > >> @@ -1623,8 +1660,19 @@ static bool hdmi_present_sense(struct > >> hdmi_spec_per_pin *per_pin, int repoll) > >> snd_ctl_notify(codec->card, > >> SNDRV_CTL_EVENT_MASK_VALUE | > >> SNDRV_CTL_EVENT_MASK_INFO, > >> &per_pin->eld_ctl->id); > >> - unlock: > >> - ret = !repoll || !pin_eld->monitor_present || pin_eld->eld_valid; > >> +skip_to_next_device: > >> + if (codec->dp_mst) { > >> + device_num++; > >> + if (device_num < per_pin->num_devices) > >> + goto next_device; > >> + } > >> + > >> + if (need_repoll) { > >> + schedule_delayed_work(&per_pin->work, > >> + msecs_to_jiffies(300)); > >> + repoll = true; > >> + } > >> + ret = !repoll || any_eld_valid; > >> > >> jack = snd_hda_jack_tbl_get(codec, pin_nid); > >> if (jack) > >> @@ -1807,7 +1855,7 @@ static int > >> generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, > >> per_pin->channels = substream->runtime->channels; > >> per_pin->setup = true; > >> > >> - hdmi_setup_audio_infoframe(codec, per_pin, non_pcm); > >> + hdmi_setup_audio_infoframe(codec, per_pin, NULL, non_pcm); > >> mutex_unlock(&per_pin->lock); > >> > >> if (spec->dyn_pin_out) { > >> @@ -2035,7 +2083,7 @@ static int hdmi_chmap_ctl_put(struct snd_kcontrol > >> *kcontrol, > >> per_pin->chmap_set = true; > >> memcpy(per_pin->chmap, chmap, sizeof(chmap)); > >> if (prepared) > >> - hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); > >> + hdmi_setup_audio_infoframe(codec, per_pin, NULL, > >> per_pin->non_pcm); > >> mutex_unlock(&per_pin->lock); > >> > >> return 0; > >> @@ -2147,7 +2195,7 @@ static int generic_hdmi_build_controls(struct > >> hda_codec *codec) static int generic_hdmi_init_per_pins(struct hda_codec > >> *codec) { > >> struct hdmi_spec *spec = codec->spec; > >> - int pin_idx; > >> + int pin_idx, dev_idx; > >> > >> for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { > >> struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); @@ > >> -2155,7 +2203,20 @@ static int generic_hdmi_init_per_pins(struct hda_codec > >> *codec) > >> per_pin->codec = codec; > >> mutex_init(&per_pin->lock); > >> INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld); > >> - eld_proc_new(per_pin, pin_idx); > >> + > >> + if (codec->dp_mst) { > >> + for (dev_idx = 0; dev_idx < HDA_MAX_DEVICES; dev_idx++) { > >> + per_pin->devices[dev_idx].device_idx = dev_idx; > >> + per_pin->devices[dev_idx].pin = per_pin; > >> + > >> + eld_device_proc_new(&per_pin->devices[dev_idx], pin_idx, > >> dev_idx); > >> + } > >> + } else { > >> + per_pin->num_devices = 0; > >> + per_pin->devices[0].device_idx = 0; > >> + per_pin->devices[0].pin = per_pin; > >> + eld_device_proc_new(&per_pin->devices[0], pin_idx, -1); > >> + } > >> } > >> return 0; > >> } > >> @@ -2191,13 +2252,19 @@ static void hdmi_array_free(struct hdmi_spec > >> *spec) static void generic_hdmi_free(struct hda_codec *codec) { > >> struct hdmi_spec *spec = codec->spec; > >> - int pin_idx; > >> + int pin_idx, dev_idx; > >> > >> for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { > >> struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); > >> > >> cancel_delayed_work_sync(&per_pin->work); > >> - eld_proc_free(per_pin); > >> + if (per_pin->num_devices) { > >> + for (dev_idx = 0; dev_idx < per_pin->num_devices; dev_idx++) { > >> + struct hdmi_spec_per_device *per_device = > >> &per_pin->devices[dev_idx]; > >> + eld_device_proc_free(per_device); > >> + } > >> + } else > >> + eld_device_proc_free(&per_pin->devices[0]); > >> } > >> > >> hdmi_array_free(spec); > >> @@ -2333,6 +2400,7 @@ static int patch_generic_hdmi(struct hda_codec > >> *codec) > >> if (is_haswell_plus(codec)) { > >> intel_haswell_enable_all_pins(codec, true); > >> intel_haswell_fixup_enable_dp12(codec); > >> + codec->dp_mst = true; > >> } > >> > >> if (is_haswell_plus(codec) || is_valleyview_plus(codec)) @@ -2346,7 > >> +2414,6 @@ static int patch_generic_hdmi(struct hda_codec *codec) > >> codec->patch_ops = generic_hdmi_patch_ops; > >> if (is_haswell_plus(codec)) { > >> codec->patch_ops.set_power_state = haswell_set_power_state; > >> - codec->dp_mst = true; > >> } > >> > >> generic_hdmi_init_per_pins(codec); > >> -- > >> 2.4.1 > >> > >> _______________________________________________ > >> Intel-gfx mailing list > >> Intel-gfx@lists.freedesktop.org > >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx >
On Fri, Jun 19, 2015 at 01:15:57PM +0200, Takashi Iwai wrote: > At Fri, 19 Jun 2015 20:33:39 +1000, > Dave Airlie wrote: > > > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > > Hi Takashi/Dave, > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > There may be 2 options: > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > vendors can also specify a value according to actual HW capabilities. > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > time. When the audio driver finds all 3 convertors are used when opening > > > a new substream, it will fail. > > > > One thing I noticed is the number of devices on a PIN is only updated when > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > entry which connects to monitor with audio support. When the monitor > > > is removed, the PCM device will be disconnected, closed and removed, > > > similar to the USB case. > > > > > > This will change ALSA core. But there will be less PCM devices and > > > substreams, since the number of connected monitors Is decided by the > > > actual GPU display pipeline. > > > > I like this option more, since I think it should be more like USB, but I've > > no idea how much work it would be from the alsa side, this patch was > > probably as deep into alsa as I've gone. > > Two things have to be considered for compatibility: > - ELD, channel map and jack detection: these are created per PCM > device, and extending to substream would confuse user space a lot. > In theory, it can be extended using subdevice number, but in anyway > this won't work with PulseAudio as is. > > - The per-pin assignment provides a more or less persistent route to a > certain device. Changing the assignment method may break the > previous setup. > > Also, the dynamic PCM creation / removal is an issue that has been > discussed many times. Unfortunately it won't work as is, at lest for > PA. Currently PA does probing of devices only at the card probe time. > The hotplug of USB-audio works because it's always tied with the > card. But in this case, the card remains while only the PCM devices > will be created / removed, thus the probe in PA won't be triggered. I guess that means we either have to hotplug entire (fake) cards or fix up userspace to support mst audio properly? We had to do some minimal changes to the ddx drivers too to make sure they're rescanning the connector list properly. Imo since this is all new I think we could require PA to rescan the PCM dev list on hotplug events too to support DP MST. And we kinda do need hotplug at that level since if we'd hotplug the entire card we'd kill a stream that's running on some other display. And always registering all of them feels like a very bad hack too. -Daniel
At Mon, 22 Jun 2015 14:54:29 +0200, Daniel Vetter wrote: > > On Fri, Jun 19, 2015 at 01:15:57PM +0200, Takashi Iwai wrote: > > At Fri, 19 Jun 2015 20:33:39 +1000, > > Dave Airlie wrote: > > > > > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > > > Hi Takashi/Dave, > > > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > > > There may be 2 options: > > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > > vendors can also specify a value according to actual HW capabilities. > > > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > > time. When the audio driver finds all 3 convertors are used when opening > > > > a new substream, it will fail. > > > > > > One thing I noticed is the number of devices on a PIN is only updated when > > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > > entry which connects to monitor with audio support. When the monitor > > > > is removed, the PCM device will be disconnected, closed and removed, > > > > similar to the USB case. > > > > > > > > This will change ALSA core. But there will be less PCM devices and > > > > substreams, since the number of connected monitors Is decided by the > > > > actual GPU display pipeline. > > > > > > I like this option more, since I think it should be more like USB, but I've > > > no idea how much work it would be from the alsa side, this patch was > > > probably as deep into alsa as I've gone. > > > > Two things have to be considered for compatibility: > > - ELD, channel map and jack detection: these are created per PCM > > device, and extending to substream would confuse user space a lot. > > In theory, it can be extended using subdevice number, but in anyway > > this won't work with PulseAudio as is. > > > > - The per-pin assignment provides a more or less persistent route to a > > certain device. Changing the assignment method may break the > > previous setup. > > > > Also, the dynamic PCM creation / removal is an issue that has been > > discussed many times. Unfortunately it won't work as is, at lest for > > PA. Currently PA does probing of devices only at the card probe time. > > The hotplug of USB-audio works because it's always tied with the > > card. But in this case, the card remains while only the PCM devices > > will be created / removed, thus the probe in PA won't be triggered. > > I guess that means we either have to hotplug entire (fake) cards or fix up > userspace to support mst audio properly? It would work for HSW/BDW. But BYT/BSW and SKL share the same controller for both HDMI and analog codecs, thus the card can't be handled as hotplugged. > We had to do some minimal changes > to the ddx drivers too to make sure they're rescanning the connector list > properly. Imo since this is all new I think we could require PA to rescan > the PCM dev list on hotplug events too to support DP MST. And we kinda do > need hotplug at that level since if we'd hotplug the entire card we'd kill > a stream that's running on some other display. > > And always registering all of them feels like a very bad hack too. Yeah, I personally am for the PCM hotplug, too. It's a cleaner way. (The current static assignment comes from the chips where they had no ELD communication -- the hardware before the recent onboard Intel and AMD gfx but connected somehow externally. For such hardware, we still need the static assignment.) OTOH, we have to keep some compatibility. And moving to the hotplug would break certainly some existing configuration that assumes the static port / device assignment. So, a compromise would be: - change the behavior via either Kconfig or module option. - create many PCM devices statically as much as possible The latter can be a problem in the case of AMD or Nvidia where 8 (or more?) ports may exist. The former is, of course, messy and confusing for users, too. Takashi
On Mon, 2015-06-22 at 15:23 +0200, Takashi Iwai wrote: > At Mon, 22 Jun 2015 14:54:29 +0200, > Daniel Vetter wrote: > > > > On Fri, Jun 19, 2015 at 01:15:57PM +0200, Takashi Iwai wrote: > > > At Fri, 19 Jun 2015 20:33:39 +1000, > > > Dave Airlie wrote: > > > > > > > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > > > > Hi Takashi/Dave, > > > > > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > > > > > There may be 2 options: > > > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > > > vendors can also specify a value according to actual HW capabilities. > > > > > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > > > time. When the audio driver finds all 3 convertors are used when opening > > > > > a new substream, it will fail. > > > > > > > > One thing I noticed is the number of devices on a PIN is only updated when > > > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > > > entry which connects to monitor with audio support. When the monitor > > > > > is removed, the PCM device will be disconnected, closed and removed, > > > > > similar to the USB case. > > > > > > > > > > This will change ALSA core. But there will be less PCM devices and > > > > > substreams, since the number of connected monitors Is decided by the > > > > > actual GPU display pipeline. > > > > > > > > I like this option more, since I think it should be more like USB, but I've > > > > no idea how much work it would be from the alsa side, this patch was > > > > probably as deep into alsa as I've gone. > > > > > > Two things have to be considered for compatibility: > > > - ELD, channel map and jack detection: these are created per PCM > > > device, and extending to substream would confuse user space a lot. > > > In theory, it can be extended using subdevice number, but in anyway > > > this won't work with PulseAudio as is. > > > > > > - The per-pin assignment provides a more or less persistent route to a > > > certain device. Changing the assignment method may break the > > > previous setup. > > > > > > Also, the dynamic PCM creation / removal is an issue that has been > > > discussed many times. Unfortunately it won't work as is, at lest for > > > PA. Currently PA does probing of devices only at the card probe time. > > > The hotplug of USB-audio works because it's always tied with the > > > card. But in this case, the card remains while only the PCM devices > > > will be created / removed, thus the probe in PA won't be triggered. > > > > I guess that means we either have to hotplug entire (fake) cards or fix up > > userspace to support mst audio properly? > > It would work for HSW/BDW. But BYT/BSW and SKL share the same > controller for both HDMI and analog codecs, thus the card can't be > handled as hotplugged. > > > We had to do some minimal changes > > to the ddx drivers too to make sure they're rescanning the connector list > > properly. Imo since this is all new I think we could require PA to rescan > > the PCM dev list on hotplug events too to support DP MST. And we kinda do > > need hotplug at that level since if we'd hotplug the entire card we'd kill > > a stream that's running on some other display. > > > > And always registering all of them feels like a very bad hack too. > > Yeah, I personally am for the PCM hotplug, too. It's a cleaner way. > > (The current static assignment comes from the chips where they had no > ELD communication -- the hardware before the recent onboard Intel and > AMD gfx but connected somehow externally. For such hardware, we > still need the static assignment.) > > OTOH, we have to keep some compatibility. And moving to the hotplug > would break certainly some existing configuration that assumes the > static port / device assignment. > > So, a compromise would be: > - change the behavior via either Kconfig or module option. > - create many PCM devices statically as much as possible > > The latter can be a problem in the case of AMD or Nvidia where 8 (or > more?) ports may exist. The former is, of course, messy and confusing > for users, too. Fwiw, Mengdong has some patches that are work in progress for the dynamic PCM creation/removal as part of the topology work. The topology has to support DSP FW that can load/unload different services that may also include a dynamically registered PCM/compressed PCM device. Tanu, what's your take on the effort for dynamically created PCMs support for pulseaudio ? Btw, the topology core now also dynamically creates/removes mixer controls, can PA handle this atm ? Thanks Liam --------------------------------------------------------------------- Intel Corporation (UK) Limited Registered No. 1134945 (England) Registered Office: Pipers Way, Swindon SN3 1RJ VAT No: 860 2173 47 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > On Mon, 2015-06-22 at 15:23 +0200, Takashi Iwai wrote: > > At Mon, 22 Jun 2015 14:54:29 +0200, > > Daniel Vetter wrote: > > > > > > On Fri, Jun 19, 2015 at 01:15:57PM +0200, Takashi Iwai wrote: > > > > At Fri, 19 Jun 2015 20:33:39 +1000, > > > > Dave Airlie wrote: > > > > > > > > > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > > > > > Hi Takashi/Dave, > > > > > > > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > > > > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > > > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > > > > > > > There may be 2 options: > > > > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > > > > vendors can also specify a value according to actual HW capabilities. > > > > > > > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > > > > time. When the audio driver finds all 3 convertors are used when opening > > > > > > a new substream, it will fail. > > > > > > > > > > One thing I noticed is the number of devices on a PIN is only updated when > > > > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > > > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > > > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > > > > entry which connects to monitor with audio support. When the monitor > > > > > > is removed, the PCM device will be disconnected, closed and removed, > > > > > > similar to the USB case. > > > > > > > > > > > > This will change ALSA core. But there will be less PCM devices and > > > > > > substreams, since the number of connected monitors Is decided by the > > > > > > actual GPU display pipeline. > > > > > > > > > > I like this option more, since I think it should be more like USB, but I've > > > > > no idea how much work it would be from the alsa side, this patch was > > > > > probably as deep into alsa as I've gone. > > > > > > > > Two things have to be considered for compatibility: > > > > - ELD, channel map and jack detection: these are created per PCM > > > > device, and extending to substream would confuse user space a lot. > > > > In theory, it can be extended using subdevice number, but in anyway > > > > this won't work with PulseAudio as is. > > > > > > > > - The per-pin assignment provides a more or less persistent route to a > > > > certain device. Changing the assignment method may break the > > > > previous setup. > > > > > > > > Also, the dynamic PCM creation / removal is an issue that has been > > > > discussed many times. Unfortunately it won't work as is, at lest for > > > > PA. Currently PA does probing of devices only at the card probe time. > > > > The hotplug of USB-audio works because it's always tied with the > > > > card. But in this case, the card remains while only the PCM devices > > > > will be created / removed, thus the probe in PA won't be triggered. > > > > > > I guess that means we either have to hotplug entire (fake) cards or fix up > > > userspace to support mst audio properly? > > > > It would work for HSW/BDW. But BYT/BSW and SKL share the same > > controller for both HDMI and analog codecs, thus the card can't be > > handled as hotplugged. > > > > > We had to do some minimal changes > > > to the ddx drivers too to make sure they're rescanning the connector list > > > properly. Imo since this is all new I think we could require PA to rescan > > > the PCM dev list on hotplug events too to support DP MST. And we kinda do > > > need hotplug at that level since if we'd hotplug the entire card we'd kill > > > a stream that's running on some other display. > > > > > > And always registering all of them feels like a very bad hack too. > > > > Yeah, I personally am for the PCM hotplug, too. It's a cleaner way. > > > > (The current static assignment comes from the chips where they had no > > ELD communication -- the hardware before the recent onboard Intel and > > AMD gfx but connected somehow externally. For such hardware, we > > still need the static assignment.) > > > > OTOH, we have to keep some compatibility. And moving to the hotplug > > would break certainly some existing configuration that assumes the > > static port / device assignment. > > > > So, a compromise would be: > > - change the behavior via either Kconfig or module option. > > - create many PCM devices statically as much as possible > > > > The latter can be a problem in the case of AMD or Nvidia where 8 (or > > more?) ports may exist. The former is, of course, messy and confusing > > for users, too. > > Fwiw, Mengdong has some patches that are work in progress for the > dynamic PCM creation/removal as part of the topology work. The topology > has to support DSP FW that can load/unload different services that may > also include a dynamically registered PCM/compressed PCM device. > > Tanu, what's your take on the effort for dynamically created PCMs > support for pulseaudio ? It's a significant amount of work, but I think PulseAudio should be improved to support this in any case, if other approaches make life miserable for driver developers. What would be the interface for getting notifications about new and removed PCM devices? udev? PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". With this new dynamic PCM system, do these logical names still work? When probing a new card, PulseAudio goes through the configured set of profiles for that card, and tries to open each configured device separately, and also each configured combination of devices (one profile may consist of multiple devices). This kind of probing gets messy, if devices appear dynamically when the card is already in use, because reliable results require other devices of the card to be closed before trying to open the new device. To avoid glitches in playing audio, the probing would have to be delayed until the card is idle... I suspect that isn't really feasible, so maybe we will just have to live with glitches. It would be nice if PulseAudio didn't have to open the PCM devices when probing, but that would require some interface to find out which PCM devices can be opened simultaneously and which can not. Another problem is that PulseAudio doesn't know which hw PCM devices are used by the logical devices. Without that information, PulseAudio has to re-probe every device that failed previously, when new hw PCM devices appear, and also re-probe every device that succeeded previously, when PCM devices are removed. I suspect that this information might actually be available, since "aplay -v -Dfront" shows the underlying hw device. Maybe PulseAudio should be using that information? > Btw, the topology core now also dynamically > creates/removes mixer controls, can PA handle this atm ? No, PA checks the mixer controls only when loading a new card. Dynamically added controls are ignored. Dynamically removed controls just cause silent failure, at least when setting volume (I didn't check other use cases). That is, changing the volume appears to succeed, but nothing actually happens. -- Tanu
At Mon, 22 Jun 2015 15:21:16 +0000, Kaskinen, Tanu wrote: > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > On Mon, 2015-06-22 at 15:23 +0200, Takashi Iwai wrote: > > > At Mon, 22 Jun 2015 14:54:29 +0200, > > > Daniel Vetter wrote: > > > > > > > > On Fri, Jun 19, 2015 at 01:15:57PM +0200, Takashi Iwai wrote: > > > > > At Fri, 19 Jun 2015 20:33:39 +1000, > > > > > Dave Airlie wrote: > > > > > > > > > > > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > > > > > > Hi Takashi/Dave, > > > > > > > > > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > > > > > > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > > > > > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > > > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > > > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > > > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > > > > > > > > > There may be 2 options: > > > > > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > > > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > > > > > vendors can also specify a value according to actual HW capabilities. > > > > > > > > > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > > > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > > > > > time. When the audio driver finds all 3 convertors are used when opening > > > > > > > a new substream, it will fail. > > > > > > > > > > > > One thing I noticed is the number of devices on a PIN is only updated when > > > > > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > > > > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > > > > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > > > > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > > > > > entry which connects to monitor with audio support. When the monitor > > > > > > > is removed, the PCM device will be disconnected, closed and removed, > > > > > > > similar to the USB case. > > > > > > > > > > > > > > This will change ALSA core. But there will be less PCM devices and > > > > > > > substreams, since the number of connected monitors Is decided by the > > > > > > > actual GPU display pipeline. > > > > > > > > > > > > I like this option more, since I think it should be more like USB, but I've > > > > > > no idea how much work it would be from the alsa side, this patch was > > > > > > probably as deep into alsa as I've gone. > > > > > > > > > > Two things have to be considered for compatibility: > > > > > - ELD, channel map and jack detection: these are created per PCM > > > > > device, and extending to substream would confuse user space a lot. > > > > > In theory, it can be extended using subdevice number, but in anyway > > > > > this won't work with PulseAudio as is. > > > > > > > > > > - The per-pin assignment provides a more or less persistent route to a > > > > > certain device. Changing the assignment method may break the > > > > > previous setup. > > > > > > > > > > Also, the dynamic PCM creation / removal is an issue that has been > > > > > discussed many times. Unfortunately it won't work as is, at lest for > > > > > PA. Currently PA does probing of devices only at the card probe time. > > > > > The hotplug of USB-audio works because it's always tied with the > > > > > card. But in this case, the card remains while only the PCM devices > > > > > will be created / removed, thus the probe in PA won't be triggered. > > > > > > > > I guess that means we either have to hotplug entire (fake) cards or fix up > > > > userspace to support mst audio properly? > > > > > > It would work for HSW/BDW. But BYT/BSW and SKL share the same > > > controller for both HDMI and analog codecs, thus the card can't be > > > handled as hotplugged. > > > > > > > We had to do some minimal changes > > > > to the ddx drivers too to make sure they're rescanning the connector list > > > > properly. Imo since this is all new I think we could require PA to rescan > > > > the PCM dev list on hotplug events too to support DP MST. And we kinda do > > > > need hotplug at that level since if we'd hotplug the entire card we'd kill > > > > a stream that's running on some other display. > > > > > > > > And always registering all of them feels like a very bad hack too. > > > > > > Yeah, I personally am for the PCM hotplug, too. It's a cleaner way. > > > > > > (The current static assignment comes from the chips where they had no > > > ELD communication -- the hardware before the recent onboard Intel and > > > AMD gfx but connected somehow externally. For such hardware, we > > > still need the static assignment.) > > > > > > OTOH, we have to keep some compatibility. And moving to the hotplug > > > would break certainly some existing configuration that assumes the > > > static port / device assignment. > > > > > > So, a compromise would be: > > > - change the behavior via either Kconfig or module option. > > > - create many PCM devices statically as much as possible > > > > > > The latter can be a problem in the case of AMD or Nvidia where 8 (or > > > more?) ports may exist. The former is, of course, messy and confusing > > > for users, too. > > > > Fwiw, Mengdong has some patches that are work in progress for the > > dynamic PCM creation/removal as part of the topology work. The topology > > has to support DSP FW that can load/unload different services that may > > also include a dynamically registered PCM/compressed PCM device. > > > > Tanu, what's your take on the effort for dynamically created PCMs > > support for pulseaudio ? > > It's a significant amount of work, but I think PulseAudio should be > improved to support this in any case, if other approaches make life > miserable for driver developers. > > What would be the interface for getting notifications about new and > removed PCM devices? udev? In general, yes. > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > With this new dynamic PCM system, do these logical names still work? Unfortunately, this doesn't work for HDA as is, because of the terribly arcane secret. For keeping the compatibility with the old config, there is a static mapping of the hdmi:x,y and hw:x,z. Maybe we should introduce a new device class for dynamic HDMI/DP device, something like dhdmi:x,y, to make things straightforward. (Just a concept -- I'm not good at naming.) Alternatively, we may introduce a new argument to hdmi PCM to access like "hdmi:CARD=x,SYSDEV=y". > When probing a new card, PulseAudio goes through the configured set of > profiles for that card, and tries to open each configured device > separately, and also each configured combination of devices (one profile > may consist of multiple devices). This kind of probing gets messy, if > devices appear dynamically when the card is already in use, because > reliable results require other devices of the card to be closed before > trying to open the new device. To avoid glitches in playing audio, the > probing would have to be delayed until the card is idle... I suspect > that isn't really feasible, so maybe we will just have to live with > glitches. > > It would be nice if PulseAudio didn't have to open the PCM devices when > probing, but that would require some interface to find out which PCM > devices can be opened simultaneously and which can not. Yeah, that's the missing information. We can give something in alsa-lib config to indicate the conflict, in theory... > Another problem is that PulseAudio doesn't know which hw PCM devices are > used by the logical devices. Without that information, PulseAudio has to > re-probe every device that failed previously, when new hw PCM devices > appear, and also re-probe every device that succeeded previously, when > PCM devices are removed. I suspect that this information might actually > be available, since "aplay -v -Dfront" shows the underlying hw device. > Maybe PulseAudio should be using that information? aplay just uses an API function to dump the setup, and its text is not supposed to be parsed as an interface. We need a proper API function to provide that missing piece like above. > > Btw, the topology core now also dynamically > > creates/removes mixer controls, can PA handle this atm ? > > No, PA checks the mixer controls only when loading a new card. > Dynamically added controls are ignored. Dynamically removed controls > just cause silent failure, at least when setting volume (I didn't check > other use cases). That is, changing the volume appears to succeed, but > nothing actually happens. Won't PA use ELD or other information? The corresponding controls to HDMI/DP will be created / deleted dynamically together with a PCM device, I suppose. Takashi
(Added pulseaudio-discuss to CC.) On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > At Mon, 22 Jun 2015 15:21:16 +0000, > Kaskinen, Tanu wrote: > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > > On Mon, 2015-06-22 at 15:23 +0200, Takashi Iwai wrote: > > > > At Mon, 22 Jun 2015 14:54:29 +0200, > > > > Daniel Vetter wrote: > > > > > > > > > > On Fri, Jun 19, 2015 at 01:15:57PM +0200, Takashi Iwai wrote: > > > > > > At Fri, 19 Jun 2015 20:33:39 +1000, > > > > > > Dave Airlie wrote: > > > > > > > > > > > > > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > > > > > > > Hi Takashi/Dave, > > > > > > > > > > > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > > > > > > > > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > > > > > > > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > > > > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > > > > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > > > > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > > > > > > > > > > > There may be 2 options: > > > > > > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > > > > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > > > > > > vendors can also specify a value according to actual HW capabilities. > > > > > > > > > > > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > > > > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > > > > > > time. When the audio driver finds all 3 convertors are used when opening > > > > > > > > a new substream, it will fail. > > > > > > > > > > > > > > One thing I noticed is the number of devices on a PIN is only updated when > > > > > > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > > > > > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > > > > > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > > > > > > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > > > > > > entry which connects to monitor with audio support. When the monitor > > > > > > > > is removed, the PCM device will be disconnected, closed and removed, > > > > > > > > similar to the USB case. > > > > > > > > > > > > > > > > This will change ALSA core. But there will be less PCM devices and > > > > > > > > substreams, since the number of connected monitors Is decided by the > > > > > > > > actual GPU display pipeline. > > > > > > > > > > > > > > I like this option more, since I think it should be more like USB, but I've > > > > > > > no idea how much work it would be from the alsa side, this patch was > > > > > > > probably as deep into alsa as I've gone. > > > > > > > > > > > > Two things have to be considered for compatibility: > > > > > > - ELD, channel map and jack detection: these are created per PCM > > > > > > device, and extending to substream would confuse user space a lot. > > > > > > In theory, it can be extended using subdevice number, but in anyway > > > > > > this won't work with PulseAudio as is. > > > > > > > > > > > > - The per-pin assignment provides a more or less persistent route to a > > > > > > certain device. Changing the assignment method may break the > > > > > > previous setup. > > > > > > > > > > > > Also, the dynamic PCM creation / removal is an issue that has been > > > > > > discussed many times. Unfortunately it won't work as is, at lest for > > > > > > PA. Currently PA does probing of devices only at the card probe time. > > > > > > The hotplug of USB-audio works because it's always tied with the > > > > > > card. But in this case, the card remains while only the PCM devices > > > > > > will be created / removed, thus the probe in PA won't be triggered. > > > > > > > > > > I guess that means we either have to hotplug entire (fake) cards or fix up > > > > > userspace to support mst audio properly? > > > > > > > > It would work for HSW/BDW. But BYT/BSW and SKL share the same > > > > controller for both HDMI and analog codecs, thus the card can't be > > > > handled as hotplugged. > > > > > > > > > We had to do some minimal changes > > > > > to the ddx drivers too to make sure they're rescanning the connector list > > > > > properly. Imo since this is all new I think we could require PA to rescan > > > > > the PCM dev list on hotplug events too to support DP MST. And we kinda do > > > > > need hotplug at that level since if we'd hotplug the entire card we'd kill > > > > > a stream that's running on some other display. > > > > > > > > > > And always registering all of them feels like a very bad hack too. > > > > > > > > Yeah, I personally am for the PCM hotplug, too. It's a cleaner way. > > > > > > > > (The current static assignment comes from the chips where they had no > > > > ELD communication -- the hardware before the recent onboard Intel and > > > > AMD gfx but connected somehow externally. For such hardware, we > > > > still need the static assignment.) > > > > > > > > OTOH, we have to keep some compatibility. And moving to the hotplug > > > > would break certainly some existing configuration that assumes the > > > > static port / device assignment. > > > > > > > > So, a compromise would be: > > > > - change the behavior via either Kconfig or module option. > > > > - create many PCM devices statically as much as possible > > > > > > > > The latter can be a problem in the case of AMD or Nvidia where 8 (or > > > > more?) ports may exist. The former is, of course, messy and confusing > > > > for users, too. > > > > > > Fwiw, Mengdong has some patches that are work in progress for the > > > dynamic PCM creation/removal as part of the topology work. The topology > > > has to support DSP FW that can load/unload different services that may > > > also include a dynamically registered PCM/compressed PCM device. > > > > > > Tanu, what's your take on the effort for dynamically created PCMs > > > support for pulseaudio ? > > > > It's a significant amount of work, but I think PulseAudio should be > > improved to support this in any case, if other approaches make life > > miserable for driver developers. > > > > What would be the interface for getting notifications about new and > > removed PCM devices? udev? > > In general, yes. > > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > With this new dynamic PCM system, do these logical names still work? > > Unfortunately, this doesn't work for HDA as is, because of the > terribly arcane secret. For keeping the compatibility with the old > config, there is a static mapping of the hdmi:x,y and hw:x,z. > > Maybe we should introduce a new device class for dynamic HDMI/DP > device, something like dhdmi:x,y, to make things straightforward. > (Just a concept -- I'm not good at naming.) > > Alternatively, we may introduce a new argument to hdmi PCM to access > like "hdmi:CARD=x,SYSDEV=y". What happens if PulseAudio tries to open "dhdmi:x,y" or "hdmi:CARD=x,SYSDEV=y", when y points to a non-HDMI device? If it fails, then PulseAudio can replace its current "hdmi:x,[0-7]" devices with "hdmi:CARD=X,SYSDEV=[0-13]" and blindly try every hw PCM device. But if opening a non-HDMI device through "hdmi:CARD=x,SYSDEV=y" succeeds, then how is PulseAudio supposed to know which hw PCM devices are HDMI devices? > > When probing a new card, PulseAudio goes through the configured set of > > profiles for that card, and tries to open each configured device > > separately, and also each configured combination of devices (one profile > > may consist of multiple devices). This kind of probing gets messy, if > > devices appear dynamically when the card is already in use, because > > reliable results require other devices of the card to be closed before > > trying to open the new device. To avoid glitches in playing audio, the > > probing would have to be delayed until the card is idle... I suspect > > that isn't really feasible, so maybe we will just have to live with > > glitches. > > > > It would be nice if PulseAudio didn't have to open the PCM devices when > > probing, but that would require some interface to find out which PCM > > devices can be opened simultaneously and which can not. > > Yeah, that's the missing information. We can give something in > alsa-lib config to indicate the conflict, in theory... > > > Another problem is that PulseAudio doesn't know which hw PCM devices are > > used by the logical devices. Without that information, PulseAudio has to > > re-probe every device that failed previously, when new hw PCM devices > > appear, and also re-probe every device that succeeded previously, when > > PCM devices are removed. I suspect that this information might actually > > be available, since "aplay -v -Dfront" shows the underlying hw device. > > Maybe PulseAudio should be using that information? > > aplay just uses an API function to dump the setup, and its text is not > supposed to be parsed as an interface. We need a proper API function > to provide that missing piece like above. > > > > > Btw, the topology core now also dynamically > > > creates/removes mixer controls, can PA handle this atm ? > > > > No, PA checks the mixer controls only when loading a new card. > > Dynamically added controls are ignored. Dynamically removed controls > > just cause silent failure, at least when setting volume (I didn't check > > other use cases). That is, changing the volume appears to succeed, but > > nothing actually happens. > > Won't PA use ELD or other information? The corresponding controls to > HDMI/DP will be created / deleted dynamically together with a PCM > device, I suppose. Yes, PA uses ELD. If mixer controls become dynamic too, then that's another thing to implement. -- Tanu
At Tue, 23 Jun 2015 07:51:22 +0000, Kaskinen, Tanu wrote: > > (Added pulseaudio-discuss to CC.) > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > At Mon, 22 Jun 2015 15:21:16 +0000, > > Kaskinen, Tanu wrote: > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > > > On Mon, 2015-06-22 at 15:23 +0200, Takashi Iwai wrote: > > > > > At Mon, 22 Jun 2015 14:54:29 +0200, > > > > > Daniel Vetter wrote: > > > > > > > > > > > > On Fri, Jun 19, 2015 at 01:15:57PM +0200, Takashi Iwai wrote: > > > > > > > At Fri, 19 Jun 2015 20:33:39 +1000, > > > > > > > Dave Airlie wrote: > > > > > > > > > > > > > > > > On 19 June 2015 at 19:54, Lin, Mengdong <mengdong.lin@intel.com> wrote: > > > > > > > > > Hi Takashi/Dave, > > > > > > > > > > > > > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > > > > > > > > > > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > > > > > > > > > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > > > > > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > > > > > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > > > > > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > > > > > > > > > > > > > There may be 2 options: > > > > > > > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > > > > > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > > > > > > > vendors can also specify a value according to actual HW capabilities. > > > > > > > > > > > > > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > > > > > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > > > > > > > time. When the audio driver finds all 3 convertors are used when opening > > > > > > > > > a new substream, it will fail. > > > > > > > > > > > > > > > > One thing I noticed is the number of devices on a PIN is only updated when > > > > > > > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > > > > > > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > > > > > > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > > > > > > > > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > > > > > > > entry which connects to monitor with audio support. When the monitor > > > > > > > > > is removed, the PCM device will be disconnected, closed and removed, > > > > > > > > > similar to the USB case. > > > > > > > > > > > > > > > > > > This will change ALSA core. But there will be less PCM devices and > > > > > > > > > substreams, since the number of connected monitors Is decided by the > > > > > > > > > actual GPU display pipeline. > > > > > > > > > > > > > > > > I like this option more, since I think it should be more like USB, but I've > > > > > > > > no idea how much work it would be from the alsa side, this patch was > > > > > > > > probably as deep into alsa as I've gone. > > > > > > > > > > > > > > Two things have to be considered for compatibility: > > > > > > > - ELD, channel map and jack detection: these are created per PCM > > > > > > > device, and extending to substream would confuse user space a lot. > > > > > > > In theory, it can be extended using subdevice number, but in anyway > > > > > > > this won't work with PulseAudio as is. > > > > > > > > > > > > > > - The per-pin assignment provides a more or less persistent route to a > > > > > > > certain device. Changing the assignment method may break the > > > > > > > previous setup. > > > > > > > > > > > > > > Also, the dynamic PCM creation / removal is an issue that has been > > > > > > > discussed many times. Unfortunately it won't work as is, at lest for > > > > > > > PA. Currently PA does probing of devices only at the card probe time. > > > > > > > The hotplug of USB-audio works because it's always tied with the > > > > > > > card. But in this case, the card remains while only the PCM devices > > > > > > > will be created / removed, thus the probe in PA won't be triggered. > > > > > > > > > > > > I guess that means we either have to hotplug entire (fake) cards or fix up > > > > > > userspace to support mst audio properly? > > > > > > > > > > It would work for HSW/BDW. But BYT/BSW and SKL share the same > > > > > controller for both HDMI and analog codecs, thus the card can't be > > > > > handled as hotplugged. > > > > > > > > > > > We had to do some minimal changes > > > > > > to the ddx drivers too to make sure they're rescanning the connector list > > > > > > properly. Imo since this is all new I think we could require PA to rescan > > > > > > the PCM dev list on hotplug events too to support DP MST. And we kinda do > > > > > > need hotplug at that level since if we'd hotplug the entire card we'd kill > > > > > > a stream that's running on some other display. > > > > > > > > > > > > And always registering all of them feels like a very bad hack too. > > > > > > > > > > Yeah, I personally am for the PCM hotplug, too. It's a cleaner way. > > > > > > > > > > (The current static assignment comes from the chips where they had no > > > > > ELD communication -- the hardware before the recent onboard Intel and > > > > > AMD gfx but connected somehow externally. For such hardware, we > > > > > still need the static assignment.) > > > > > > > > > > OTOH, we have to keep some compatibility. And moving to the hotplug > > > > > would break certainly some existing configuration that assumes the > > > > > static port / device assignment. > > > > > > > > > > So, a compromise would be: > > > > > - change the behavior via either Kconfig or module option. > > > > > - create many PCM devices statically as much as possible > > > > > > > > > > The latter can be a problem in the case of AMD or Nvidia where 8 (or > > > > > more?) ports may exist. The former is, of course, messy and confusing > > > > > for users, too. > > > > > > > > Fwiw, Mengdong has some patches that are work in progress for the > > > > dynamic PCM creation/removal as part of the topology work. The topology > > > > has to support DSP FW that can load/unload different services that may > > > > also include a dynamically registered PCM/compressed PCM device. > > > > > > > > Tanu, what's your take on the effort for dynamically created PCMs > > > > support for pulseaudio ? > > > > > > It's a significant amount of work, but I think PulseAudio should be > > > improved to support this in any case, if other approaches make life > > > miserable for driver developers. > > > > > > What would be the interface for getting notifications about new and > > > removed PCM devices? udev? > > > > In general, yes. > > > > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > > With this new dynamic PCM system, do these logical names still work? > > > > Unfortunately, this doesn't work for HDA as is, because of the > > terribly arcane secret. For keeping the compatibility with the old > > config, there is a static mapping of the hdmi:x,y and hw:x,z. > > > > Maybe we should introduce a new device class for dynamic HDMI/DP > > device, something like dhdmi:x,y, to make things straightforward. > > (Just a concept -- I'm not good at naming.) > > > > Alternatively, we may introduce a new argument to hdmi PCM to access > > like "hdmi:CARD=x,SYSDEV=y". > > What happens if PulseAudio tries to open "dhdmi:x,y" or > "hdmi:CARD=x,SYSDEV=y", when y points to a non-HDMI device? If it fails, > then PulseAudio can replace its current "hdmi:x,[0-7]" devices with > "hdmi:CARD=X,SYSDEV=[0-13]" and blindly try every hw PCM device. But if > opening a non-HDMI device through "hdmi:CARD=x,SYSDEV=y" succeeds, then > how is PulseAudio supposed to know which hw PCM devices are HDMI > devices? It's a good question. I think this is the core part of the missing pieces. What I have in my mind is to extend SNDRV_PCM_CLASS_* definition for dedicated to HDMI/DP, e.g. SNDRV_PCM_CLASS_HDMI. The difference between DP and HDMI can be specified in subclass optionally. We may add also SNDRV_PCM_CLASS_SPDIF, too. This can be taken from snd_pcm_info_get_class(). Also it's exposed in sysfs, too. (Oh the sysfs interface looks buggy, I have to fix...) Takashi
On Tue, 2015-06-23 at 10:06 +0200, Takashi Iwai wrote: > At Tue, 23 Jun 2015 07:51:22 +0000, > Kaskinen, Tanu wrote: > > > > (Added pulseaudio-discuss to CC.) > > > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > > At Mon, 22 Jun 2015 15:21:16 +0000, > > > Kaskinen, Tanu wrote: > > > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: <snip> > > > > > Tanu, what's your take on the effort for dynamically created PCMs > > > > > support for pulseaudio ? > > > > > > > > It's a significant amount of work, but I think PulseAudio should be > > > > improved to support this in any case, if other approaches make life > > > > miserable for driver developers. > > > > > > > > What would be the interface for getting notifications about new and > > > > removed PCM devices? udev? > > > > > > In general, yes. > > > > > > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > > > With this new dynamic PCM system, do these logical names still work? > > > > > > Unfortunately, this doesn't work for HDA as is, because of the > > > terribly arcane secret. For keeping the compatibility with the old > > > config, there is a static mapping of the hdmi:x,y and hw:x,z. > > > > > > Maybe we should introduce a new device class for dynamic HDMI/DP > > > device, something like dhdmi:x,y, to make things straightforward. > > > (Just a concept -- I'm not good at naming.) > > > > > > Alternatively, we may introduce a new argument to hdmi PCM to access > > > like "hdmi:CARD=x,SYSDEV=y". > > > > What happens if PulseAudio tries to open "dhdmi:x,y" or > > "hdmi:CARD=x,SYSDEV=y", when y points to a non-HDMI device? If it fails, > > then PulseAudio can replace its current "hdmi:x,[0-7]" devices with > > "hdmi:CARD=X,SYSDEV=[0-13]" and blindly try every hw PCM device. But if > > opening a non-HDMI device through "hdmi:CARD=x,SYSDEV=y" succeeds, then > > how is PulseAudio supposed to know which hw PCM devices are HDMI > > devices? > > It's a good question. I think this is the core part of the missing > pieces. > > What I have in my mind is to extend SNDRV_PCM_CLASS_* definition for > dedicated to HDMI/DP, e.g. SNDRV_PCM_CLASS_HDMI. The difference > between DP and HDMI can be specified in subclass optionally. Sounds good. Knowing the difference between HDMI, DisplayPort and Thunderbolt would be very nice too. It would enable better labelling in UIs. I have one minor concern, though: what if a PCM device isn't statically assigned to one output connector? Is it possible that some DSP is able to dynamically change the PCM routing between different outputs? In those cases the PCM class would be useless information (unless there are notifications when the class changes). I don't have any better ideas, though. I also wonder about compatibility between various combinations of kernel, alsa-lib and PA versions. An old kernel doesn't have dynamic PCM devices, and doesn't know about the HDMI PCM class. An old alsa-lib doesn't support the SYSDEV parameter, and doesn't know about the HDMI PCM class. An old PA version will only use the old-style "hdmi:x,y" device strings, and won't check the PCM class. There are 8 cases: 1: old kernel, old alsa-lib, old PA: No chance for regressions. 2: old kernel, old alsa-lib, new PA: The old alsa-lib version won't report the PCM class correctly. This can be handled by falling back to the old PA behaviour when an old alsa-lib version is detected at PA build time. 3: old kernel, new alsa-lib, old PA: No chance for regressions. 4: old kernel, new alsa-lib, new PA: The old kernel won't report the PCM class correctly. How should this be handled? Should PA do kernel version checking, and fall back to the old behaviour with old kernels? 5: new kernel, old alsa-lib, old PA: Do the kernel changes cause regressions on hardware that used to work, or do the changes only affect new hardware that has never worked? 6: new kernel, old alsa-lib, new PA: If PA uses the fallback strategy described in case 2, then this is equivalent to case 5. 7: new kernel, new alsa-lib, old PA: Equivalent to case 5. 8: new kernel, new alsa-lib, new PA: Everything works perfectly. -- Tanu
On Wed, 2015-06-24 at 12:41 +0000, Kaskinen, Tanu wrote: > On Tue, 2015-06-23 at 10:06 +0200, Takashi Iwai wrote: > > At Tue, 23 Jun 2015 07:51:22 +0000, > > Kaskinen, Tanu wrote: > > > > > > (Added pulseaudio-discuss to CC.) > > > > > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > > > At Mon, 22 Jun 2015 15:21:16 +0000, > > > > Kaskinen, Tanu wrote: > > > > > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > <snip> > > > > > > > Tanu, what's your take on the effort for dynamically created PCMs > > > > > > support for pulseaudio ? > > > > > > > > > > It's a significant amount of work, but I think PulseAudio should be > > > > > improved to support this in any case, if other approaches make life > > > > > miserable for driver developers. > > > > > > > > > > What would be the interface for getting notifications about new and > > > > > removed PCM devices? udev? > > > > > > > > In general, yes. > > > > > > > > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > > > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > > > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > > > > With this new dynamic PCM system, do these logical names still work? > > > > > > > > Unfortunately, this doesn't work for HDA as is, because of the > > > > terribly arcane secret. For keeping the compatibility with the old > > > > config, there is a static mapping of the hdmi:x,y and hw:x,z. > > > > > > > > Maybe we should introduce a new device class for dynamic HDMI/DP > > > > device, something like dhdmi:x,y, to make things straightforward. > > > > (Just a concept -- I'm not good at naming.) > > > > > > > > Alternatively, we may introduce a new argument to hdmi PCM to access > > > > like "hdmi:CARD=x,SYSDEV=y". > > > > > > What happens if PulseAudio tries to open "dhdmi:x,y" or > > > "hdmi:CARD=x,SYSDEV=y", when y points to a non-HDMI device? If it fails, > > > then PulseAudio can replace its current "hdmi:x,[0-7]" devices with > > > "hdmi:CARD=X,SYSDEV=[0-13]" and blindly try every hw PCM device. But if > > > opening a non-HDMI device through "hdmi:CARD=x,SYSDEV=y" succeeds, then > > > how is PulseAudio supposed to know which hw PCM devices are HDMI > > > devices? > > > > It's a good question. I think this is the core part of the missing > > pieces. > > > > What I have in my mind is to extend SNDRV_PCM_CLASS_* definition for > > dedicated to HDMI/DP, e.g. SNDRV_PCM_CLASS_HDMI. The difference > > between DP and HDMI can be specified in subclass optionally. > > Sounds good. Knowing the difference between HDMI, DisplayPort and > Thunderbolt would be very nice too. It would enable better labelling in > UIs. > > I have one minor concern, though: what if a PCM device isn't statically > assigned to one output connector? Is it possible that some DSP is able > to dynamically change the PCM routing between different outputs? In > those cases the PCM class would be useless information (unless there are > notifications when the class changes). I don't have any better ideas, > though. > This is possible atm, we can route from one PCM to multiple outputs depending on DSP and codec mixer settings. The outputs can even be on different physical interfaces. Liam
On Wed, 2015-06-24 at 14:06 +0100, Liam Girdwood wrote: > On Wed, 2015-06-24 at 12:41 +0000, Kaskinen, Tanu wrote: > > On Tue, 2015-06-23 at 10:06 +0200, Takashi Iwai wrote: > > > At Tue, 23 Jun 2015 07:51:22 +0000, > > > Kaskinen, Tanu wrote: > > > > > > > > (Added pulseaudio-discuss to CC.) > > > > > > > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > > > > At Mon, 22 Jun 2015 15:21:16 +0000, > > > > > Kaskinen, Tanu wrote: > > > > > > > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > > > <snip> > > > > > > > > > Tanu, what's your take on the effort for dynamically created PCMs > > > > > > > support for pulseaudio ? > > > > > > > > > > > > It's a significant amount of work, but I think PulseAudio should be > > > > > > improved to support this in any case, if other approaches make life > > > > > > miserable for driver developers. > > > > > > > > > > > > What would be the interface for getting notifications about new and > > > > > > removed PCM devices? udev? > > > > > > > > > > In general, yes. > > > > > > > > > > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > > > > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > > > > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > > > > > With this new dynamic PCM system, do these logical names still work? > > > > > > > > > > Unfortunately, this doesn't work for HDA as is, because of the > > > > > terribly arcane secret. For keeping the compatibility with the old > > > > > config, there is a static mapping of the hdmi:x,y and hw:x,z. > > > > > > > > > > Maybe we should introduce a new device class for dynamic HDMI/DP > > > > > device, something like dhdmi:x,y, to make things straightforward. > > > > > (Just a concept -- I'm not good at naming.) > > > > > > > > > > Alternatively, we may introduce a new argument to hdmi PCM to access > > > > > like "hdmi:CARD=x,SYSDEV=y". > > > > > > > > What happens if PulseAudio tries to open "dhdmi:x,y" or > > > > "hdmi:CARD=x,SYSDEV=y", when y points to a non-HDMI device? If it fails, > > > > then PulseAudio can replace its current "hdmi:x,[0-7]" devices with > > > > "hdmi:CARD=X,SYSDEV=[0-13]" and blindly try every hw PCM device. But if > > > > opening a non-HDMI device through "hdmi:CARD=x,SYSDEV=y" succeeds, then > > > > how is PulseAudio supposed to know which hw PCM devices are HDMI > > > > devices? > > > > > > It's a good question. I think this is the core part of the missing > > > pieces. > > > > > > What I have in my mind is to extend SNDRV_PCM_CLASS_* definition for > > > dedicated to HDMI/DP, e.g. SNDRV_PCM_CLASS_HDMI. The difference > > > between DP and HDMI can be specified in subclass optionally. > > > > Sounds good. Knowing the difference between HDMI, DisplayPort and > > Thunderbolt would be very nice too. It would enable better labelling in > > UIs. > > > > I have one minor concern, though: what if a PCM device isn't statically > > assigned to one output connector? Is it possible that some DSP is able > > to dynamically change the PCM routing between different outputs? In > > those cases the PCM class would be useless information (unless there are > > notifications when the class changes). I don't have any better ideas, > > though. > > > > This is possible atm, we can route from one PCM to multiple outputs > depending on DSP and codec mixer settings. The outputs can even be on > different physical interfaces. Hmm, my question was a bit silly. It has been possible forever to switch between e.g. headphones and speakers using just the mixer. And in this case that we're discussing, the question was irrelevant anyway, because surely the dynamically created PCM would be dedicated to the plugged-in HDMI port, otherwise the dynamic creation wouldn't really make sense. So, setting the PCM class should work at least in this case. If there are cases where the DSP may route the same PCM to either HDMI or non-HDMI output depending on mixer settings, then that's when the PCM class would be less useful. In any case, PulseAudio needs to figure out whether it should ignore the PCM class and use "hdmi:x,y" or whether it should check the PCM class and use "hdmi:CARD=x,SYSDEV=y". How should that be done? Is checking the kernel (and alsa-lib) version a good approach, or is some other mechanism needed? Checking the versions should work, if all HDMI audio drivers start to set the PCM class at the same time, but if some drivers set it and some don't, then version checking isn't a reliable solution. -- Tanu
> > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > I think we also need to decide how to manage PCM devices for DP MST. > > Now the HD-A driver create a PCM device for each pin, and the substream > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). What hardware feature are available ? Only three monitors playing different audio streams or With 1x3 video wall , can the center monitor playback stereo while the left monitor play left channel and right monitor play right channel ?
On Wed, 2015-06-24 at 20:47 +0000, Kaskinen, Tanu wrote: > On Wed, 2015-06-24 at 14:06 +0100, Liam Girdwood wrote: > > On Wed, 2015-06-24 at 12:41 +0000, Kaskinen, Tanu wrote: > > > On Tue, 2015-06-23 at 10:06 +0200, Takashi Iwai wrote: > > > > At Tue, 23 Jun 2015 07:51:22 +0000, > > > > Kaskinen, Tanu wrote: > > > > > > > > > > (Added pulseaudio-discuss to CC.) > > > > > > > > > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > > > > > At Mon, 22 Jun 2015 15:21:16 +0000, > > > > > > Kaskinen, Tanu wrote: > > > > > > > > > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > > > > > <snip> > > > > > > > > > > > Tanu, what's your take on the effort for dynamically created PCMs > > > > > > > > support for pulseaudio ? > > > > > > > > > > > > > > It's a significant amount of work, but I think PulseAudio should be > > > > > > > improved to support this in any case, if other approaches make life > > > > > > > miserable for driver developers. > > > > > > > > > > > > > > What would be the interface for getting notifications about new and > > > > > > > removed PCM devices? udev? > > > > > > > > > > > > In general, yes. > > > > > > > > > > > > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > > > > > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > > > > > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > > > > > > With this new dynamic PCM system, do these logical names still work? > > > > > > > > > > > > Unfortunately, this doesn't work for HDA as is, because of the > > > > > > terribly arcane secret. For keeping the compatibility with the old > > > > > > config, there is a static mapping of the hdmi:x,y and hw:x,z. > > > > > > > > > > > > Maybe we should introduce a new device class for dynamic HDMI/DP > > > > > > device, something like dhdmi:x,y, to make things straightforward. > > > > > > (Just a concept -- I'm not good at naming.) > > > > > > > > > > > > Alternatively, we may introduce a new argument to hdmi PCM to access > > > > > > like "hdmi:CARD=x,SYSDEV=y". > > > > > > > > > > What happens if PulseAudio tries to open "dhdmi:x,y" or > > > > > "hdmi:CARD=x,SYSDEV=y", when y points to a non-HDMI device? If it fails, > > > > > then PulseAudio can replace its current "hdmi:x,[0-7]" devices with > > > > > "hdmi:CARD=X,SYSDEV=[0-13]" and blindly try every hw PCM device. But if > > > > > opening a non-HDMI device through "hdmi:CARD=x,SYSDEV=y" succeeds, then > > > > > how is PulseAudio supposed to know which hw PCM devices are HDMI > > > > > devices? > > > > > > > > It's a good question. I think this is the core part of the missing > > > > pieces. > > > > > > > > What I have in my mind is to extend SNDRV_PCM_CLASS_* definition for > > > > dedicated to HDMI/DP, e.g. SNDRV_PCM_CLASS_HDMI. The difference > > > > between DP and HDMI can be specified in subclass optionally. > > > > > > Sounds good. Knowing the difference between HDMI, DisplayPort and > > > Thunderbolt would be very nice too. It would enable better labelling in > > > UIs. > > > > > > I have one minor concern, though: what if a PCM device isn't statically > > > assigned to one output connector? Is it possible that some DSP is able > > > to dynamically change the PCM routing between different outputs? In > > > those cases the PCM class would be useless information (unless there are > > > notifications when the class changes). I don't have any better ideas, > > > though. > > > > > > > This is possible atm, we can route from one PCM to multiple outputs > > depending on DSP and codec mixer settings. The outputs can even be on > > different physical interfaces. > > Hmm, my question was a bit silly. It has been possible forever to switch > between e.g. headphones and speakers using just the mixer. And in this > case that we're discussing, the question was irrelevant anyway, because > surely the dynamically created PCM would be dedicated to the plugged-in > HDMI port, otherwise the dynamic creation wouldn't really make sense. > So, setting the PCM class should work at least in this case. > > If there are cases where the DSP may route the same PCM to either HDMI > or non-HDMI output depending on mixer settings, then that's when the PCM > class would be less useful. > Yeah, we may need to provide other hints here. DSPs make it possible now to route one PCM to multiple HW endpoints. > In any case, PulseAudio needs to figure out whether it should ignore the > PCM class and use "hdmi:x,y" or whether it should check the PCM class > and use "hdmi:CARD=x,SYSDEV=y". How should that be done? Is checking the > kernel (and alsa-lib) version a good approach, or is some other > mechanism needed? Checking the versions should work, if all HDMI audio > drivers start to set the PCM class at the same time, but if some drivers > set it and some don't, then version checking isn't a reliable solution. struct snd_pcm_info does have some reserved space (64 bytes currently set as 0) that could be used to differentiate and provide information on the PCM ? Liam
On Thu, Jun 25, 2015 at 04:22:38PM +0800, Raymond Yau wrote: > > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I > sent them. > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > What hardware feature are available ? > > Only three monitors playing different audio streams or > > With 1x3 video wall , can the center monitor playback stereo while the left > monitor play left channel and right monitor play right channel ? Ohhh, clever idea :) If it isn't support already it'd make an awesome feature at least. Kind regards, David
On Thu, 2015-06-25 at 10:44 +0100, Liam Girdwood wrote: > On Wed, 2015-06-24 at 20:47 +0000, Kaskinen, Tanu wrote: > > On Wed, 2015-06-24 at 14:06 +0100, Liam Girdwood wrote: > > > On Wed, 2015-06-24 at 12:41 +0000, Kaskinen, Tanu wrote: > > > > On Tue, 2015-06-23 at 10:06 +0200, Takashi Iwai wrote: > > > > > At Tue, 23 Jun 2015 07:51:22 +0000, > > > > > Kaskinen, Tanu wrote: > > > > > > > > > > > > (Added pulseaudio-discuss to CC.) > > > > > > > > > > > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > > > > > > At Mon, 22 Jun 2015 15:21:16 +0000, > > > > > > > Kaskinen, Tanu wrote: > > > > > > > > > > > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > > > > > > > <snip> > > > > > > > > > > > > > Tanu, what's your take on the effort for dynamically created PCMs > > > > > > > > > support for pulseaudio ? > > > > > > > > > > > > > > > > It's a significant amount of work, but I think PulseAudio should be > > > > > > > > improved to support this in any case, if other approaches make life > > > > > > > > miserable for driver developers. > > > > > > > > > > > > > > > > What would be the interface for getting notifications about new and > > > > > > > > removed PCM devices? udev? > > > > > > > > > > > > > > In general, yes. > > > > > > > > > > > > > > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > > > > > > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > > > > > > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > > > > > > > With this new dynamic PCM system, do these logical names still work? > > > > > > > > > > > > > > Unfortunately, this doesn't work for HDA as is, because of the > > > > > > > terribly arcane secret. For keeping the compatibility with the old > > > > > > > config, there is a static mapping of the hdmi:x,y and hw:x,z. > > > > > > > > > > > > > > Maybe we should introduce a new device class for dynamic HDMI/DP > > > > > > > device, something like dhdmi:x,y, to make things straightforward. > > > > > > > (Just a concept -- I'm not good at naming.) > > > > > > > > > > > > > > Alternatively, we may introduce a new argument to hdmi PCM to access > > > > > > > like "hdmi:CARD=x,SYSDEV=y". > > > > > > > > > > > > What happens if PulseAudio tries to open "dhdmi:x,y" or > > > > > > "hdmi:CARD=x,SYSDEV=y", when y points to a non-HDMI device? If it fails, > > > > > > then PulseAudio can replace its current "hdmi:x,[0-7]" devices with > > > > > > "hdmi:CARD=X,SYSDEV=[0-13]" and blindly try every hw PCM device. But if > > > > > > opening a non-HDMI device through "hdmi:CARD=x,SYSDEV=y" succeeds, then > > > > > > how is PulseAudio supposed to know which hw PCM devices are HDMI > > > > > > devices? > > > > > > > > > > It's a good question. I think this is the core part of the missing > > > > > pieces. > > > > > > > > > > What I have in my mind is to extend SNDRV_PCM_CLASS_* definition for > > > > > dedicated to HDMI/DP, e.g. SNDRV_PCM_CLASS_HDMI. The difference > > > > > between DP and HDMI can be specified in subclass optionally. > > > > > > > > Sounds good. Knowing the difference between HDMI, DisplayPort and > > > > Thunderbolt would be very nice too. It would enable better labelling in > > > > UIs. > > > > > > > > I have one minor concern, though: what if a PCM device isn't statically > > > > assigned to one output connector? Is it possible that some DSP is able > > > > to dynamically change the PCM routing between different outputs? In > > > > those cases the PCM class would be useless information (unless there are > > > > notifications when the class changes). I don't have any better ideas, > > > > though. > > > > > > > > > > This is possible atm, we can route from one PCM to multiple outputs > > > depending on DSP and codec mixer settings. The outputs can even be on > > > different physical interfaces. > > > > Hmm, my question was a bit silly. It has been possible forever to switch > > between e.g. headphones and speakers using just the mixer. And in this > > case that we're discussing, the question was irrelevant anyway, because > > surely the dynamically created PCM would be dedicated to the plugged-in > > HDMI port, otherwise the dynamic creation wouldn't really make sense. > > So, setting the PCM class should work at least in this case. > > > > If there are cases where the DSP may route the same PCM to either HDMI > > or non-HDMI output depending on mixer settings, then that's when the PCM > > class would be less useful. > > > > Yeah, we may need to provide other hints here. DSPs make it possible now > to route one PCM to multiple HW endpoints. Getting information to userspace about the hw endpoints and how each hw PCM and the endpoints are related would probably also solve this dynamic HDMI PCM issue, but it would probably be much more complicated than just adding a couple of bits to the PCM info. I suggest that we leave the dynamically routed PCM problem alone for now, and only focus on the dynamic HDMI PCM issue, even if that means that we devise a solution for the HDMI PCM issue that will become obsolete later. > > In any case, PulseAudio needs to figure out whether it should ignore the > > PCM class and use "hdmi:x,y" or whether it should check the PCM class > > and use "hdmi:CARD=x,SYSDEV=y". How should that be done? Is checking the > > kernel (and alsa-lib) version a good approach, or is some other > > mechanism needed? Checking the versions should work, if all HDMI audio > > drivers start to set the PCM class at the same time, but if some drivers > > set it and some don't, then version checking isn't a reliable solution. > > struct snd_pcm_info does have some reserved space (64 bytes currently > set as 0) that could be used to differentiate and provide information on > the PCM ? Yes, snd_pcm_info could have e.g. a version field. If the version is 0, then PulseAudio should handle HDMI devices as before (blindly try "hdmi:x,[0-7]"), and if it's 1, then PulseAudio should check the PCM class, and use "hdmi:CARD=x,SYSDEV=y" if the class is HDMI. -- Tanu
On Tue, 2015-06-23 at 10:51 +0300, Tanu Kaskinen wrote: > (Added pulseaudio-discuss to CC.) > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > At Mon, 22 Jun 2015 15:21:16 +0000, > > Kaskinen, Tanu wrote: > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > > > Btw, the topology core now also dynamically > > > > creates/removes mixer controls, can PA handle this atm ? > > > > > > No, PA checks the mixer controls only when loading a new card. > > > Dynamically added controls are ignored. Dynamically removed controls > > > just cause silent failure, at least when setting volume (I didn't check > > > other use cases). That is, changing the volume appears to succeed, but > > > nothing actually happens. > > > > Won't PA use ELD or other information? The corresponding controls to > > HDMI/DP will be created / deleted dynamically together with a PCM > > device, I suppose. > > Yes, PA uses ELD. If mixer controls become dynamic too, then that's > another thing to implement. Liam, how does the userspace know when the new PCM is ready to use? If new mixer controls are added too, it has to be defined which gets created first: the PCM device or the mixer controls. I think it would be best if the mixer controls get created first, and when the new PCM device appears, it's immediately fully ready to be used. -- Tanu
On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > At Mon, 22 Jun 2015 15:21:16 +0000, > Kaskinen, Tanu wrote: > > PulseAudio (mostly) doesn't use the hw:X devices directly. Instead, it > > uses logical names like "front", "hdmi", "iec958", etc. Speaking of HDMI > > specifically, PulseAudio uses devices from "hdmi:X,0" to "hdmi:X,7". > > With this new dynamic PCM system, do these logical names still work? > > Unfortunately, this doesn't work for HDA as is, because of the > terribly arcane secret. For keeping the compatibility with the old > config, there is a static mapping of the hdmi:x,y and hw:x,z. Yes, the mapping is like this: y = 0, z = 3 y = 1, z = 7 y = 2, z = 8 y = 3, z = 9 etc. Now I'm wondering if this is HDA specific (your wording suggests that it is)? For HDMI ELD information and jack detection support, PulseAudio has been assuming this particular mapping. If other drivers have been using a different mapping, then ELD and jack detection support has been and continues to be broken for other drivers in PA. -- Tanu
On Fri, 2015-06-26 at 11:50 +0100, Kaskinen, Tanu wrote: > On Tue, 2015-06-23 at 10:51 +0300, Tanu Kaskinen wrote: > > (Added pulseaudio-discuss to CC.) > > > > On Mon, 2015-06-22 at 17:44 +0200, Takashi Iwai wrote: > > > At Mon, 22 Jun 2015 15:21:16 +0000, > > > Kaskinen, Tanu wrote: > > > > > > > > On Mon, 2015-06-22 at 14:29 +0100, Liam Girdwood wrote: > > > > > Btw, the topology core now also dynamically > > > > > creates/removes mixer controls, can PA handle this atm ? > > > > > > > > No, PA checks the mixer controls only when loading a new card. > > > > Dynamically added controls are ignored. Dynamically removed controls > > > > just cause silent failure, at least when setting volume (I didn't check > > > > other use cases). That is, changing the volume appears to succeed, but > > > > nothing actually happens. > > > > > > Won't PA use ELD or other information? The corresponding controls to > > > HDMI/DP will be created / deleted dynamically together with a PCM > > > device, I suppose. > > > > Yes, PA uses ELD. If mixer controls become dynamic too, then that's > > another thing to implement. > > Liam, how does the userspace know when the new PCM is ready to use? It's generally ready when the PCM is created iirc. > If > new mixer controls are added too, it has to be defined which gets > created first: the PCM device or the mixer controls. I think it would be > best if the mixer controls get created first, and when the new PCM > device appears, it's immediately fully ready to be used. > I agree, adding mixers first make sense. Liam
> > > > > > Shall we move or cc this discussion on audio driver side to ALSA ML? > > > > Oops I thought I had cc'ed these patches to alsa-devel as well when I sent them. > > > > > I think we also need to decide how to manage PCM devices for DP MST. > > > Now the HD-A driver create a PCM device for each pin, and the substream > > > number is 1 for each PCM. Now with DP MST enabled, each pin can support > > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > > > > > > There may be 2 options: > > > -#1: Let an HDMI codec specify number of substreams, same as the number > > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > > > vendors can also specify a value according to actual HW capabilities. > > > > > > So for HSW, we have 3x3 subtreams totally. But we only have 3 convertors > > > (for 3 display pipelines), so we can open up to 3 substreams at the same > > > time. When the audio driver finds all 3 convertors are used when opening > > > a new substream, it will fail. > > > > One thing I noticed is the number of devices on a PIN is only updated when > > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and when > > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > > enough at this point, though I guess it'll always be 0 or 3. > > > > > > - #2: Create PCM device dynamically. Only create a PCM devices for a device > > > entry which connects to monitor with audio support. When the monitor > > > is removed, the PCM device will be disconnected, closed and removed, > > > similar to the USB case. Do the driver really need dynamic PCM since display ports are dasiy chained and the locations within the dasiy chain are fixed ?
On Sat, 27 Jun 2015, Raymond Yau <superquad.vortex2@gmail.com> wrote: >> > > >> > > Shall we move or cc this discussion on audio driver side to ALSA ML? >> > >> > Oops I thought I had cc'ed these patches to alsa-devel as well when I > sent them. >> > >> > > I think we also need to decide how to manage PCM devices for DP MST. >> > > Now the HD-A driver create a PCM device for each pin, and the > substream >> > > number is 1 for each PCM. Now with DP MST enabled, each pin can > support >> > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). >> > > >> > > There may be 2 options: >> > > -#1: Let an HDMI codec specify number of substreams, same as the > number >> > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other >> > > vendors can also specify a value according to actual HW capabilities. >> > > >> > > So for HSW, we have 3x3 subtreams totally. But we only have 3 > convertors >> > > (for 3 display pipelines), so we can open up to 3 substreams at the > same >> > > time. When the audio driver finds all 3 convertors are used when > opening >> > > a new substream, it will fail. >> > >> > One thing I noticed is the number of devices on a PIN is only updated > when >> > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and > when >> > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic >> > enough at this point, though I guess it'll always be 0 or 3. >> > > >> > > - #2: Create PCM device dynamically. Only create a PCM devices for a > device >> > > entry which connects to monitor with audio support. When the monitor >> > > is removed, the PCM device will be disconnected, closed and removed, >> > > similar to the USB case. > > Do the driver really need dynamic PCM since display ports are dasiy chained > and the locations within the dasiy chain are fixed ? Please elaborate. BR, Jani.
2015-6-29 ??3:58? "Jani Nikula" <jani.nikula@linux.intel.com>??? > > On Sat, 27 Jun 2015, Raymond Yau <superquad.vortex2@gmail.com> wrote: > >> > > > >> > > Shall we move or cc this discussion on audio driver side to ALSA ML? > >> > > >> > Oops I thought I had cc'ed these patches to alsa-devel as well when I > > sent them. > >> > > >> > > I think we also need to decide how to manage PCM devices for DP MST. > >> > > Now the HD-A driver create a PCM device for each pin, and the > > substream > >> > > number is 1 for each PCM. Now with DP MST enabled, each pin can > > support > >> > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). > >> > > > >> > > There may be 2 options: > >> > > -#1: Let an HDMI codec specify number of substreams, same as the > > number > >> > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other > >> > > vendors can also specify a value according to actual HW capabilities. > >> > > > >> > > So for HSW, we have 3x3 subtreams totally. But we only have 3 > > convertors > >> > > (for 3 display pipelines), so we can open up to 3 substreams at the > > same > >> > > time. When the audio driver finds all 3 convertors are used when > > opening > >> > > a new substream, it will fail. > >> > > >> > One thing I noticed is the number of devices on a PIN is only updated > > when > >> > the MST device is plugged in so normally pins 5,6,7 have 0 devices, and > > when > >> > I plug in MST device, I get the 3 devices on port 6. So it seems dynamic > >> > enough at this point, though I guess it'll always be 0 or 3. > >> > > > >> > > - #2: Create PCM device dynamically. Only create a PCM devices for a > > device > >> > > entry which connects to monitor with audio support. When the monitor > >> > > is removed, the PCM device will be disconnected, closed and removed, > >> > > similar to the USB case. > > > > Do the driver really need dynamic PCM since display ports are dasiy chained > > and the locations within the dasiy chain are fixed ? http://www.intel.com/support/motherboards/desktop/sb/CS-034199.htm Do the first display always support sound since hdmi can connect to tv using dvi ? As Pulseaudio does not support multi streaming ( playing different audio streams to headphone and rear panel speakers , how can pulseaudion support displayport MST ?
On Fri, 03 Jul 2015, Raymond Yau <superquad.vortex2@gmail.com> wrote: > 2015-6-29 ??3:58? "Jani Nikula" <jani.nikula@linux.intel.com>??? >> >> On Sat, 27 Jun 2015, Raymond Yau <superquad.vortex2@gmail.com> wrote: >> >> > > >> >> > > Shall we move or cc this discussion on audio driver side to ALSA > ML? >> >> > >> >> > Oops I thought I had cc'ed these patches to alsa-devel as well when I >> > sent them. >> >> > >> >> > > I think we also need to decide how to manage PCM devices for DP > MST. >> >> > > Now the HD-A driver create a PCM device for each pin, and the >> > substream >> >> > > number is 1 for each PCM. Now with DP MST enabled, each pin can >> > support >> >> > > multiple streams (e.g. 3 on Intel HSW/BDW/SKL). >> >> > > >> >> > > There may be 2 options: >> >> > > -#1: Let an HDMI codec specify number of substreams, same as the >> > number >> >> > > of device entries on a pin. We can specify 3 for HSW/BDW/SKL. Other >> >> > > vendors can also specify a value according to actual HW > capabilities. >> >> > > >> >> > > So for HSW, we have 3x3 subtreams totally. But we only have 3 >> > convertors >> >> > > (for 3 display pipelines), so we can open up to 3 substreams at the >> > same >> >> > > time. When the audio driver finds all 3 convertors are used when >> > opening >> >> > > a new substream, it will fail. >> >> > >> >> > One thing I noticed is the number of devices on a PIN is only updated >> > when >> >> > the MST device is plugged in so normally pins 5,6,7 have 0 devices, > and >> > when >> >> > I plug in MST device, I get the 3 devices on port 6. So it seems > dynamic >> >> > enough at this point, though I guess it'll always be 0 or 3. >> >> > > >> >> > > - #2: Create PCM device dynamically. Only create a PCM devices for > a >> > device >> >> > > entry which connects to monitor with audio support. When the > monitor >> >> > > is removed, the PCM device will be disconnected, closed and > removed, >> >> > > similar to the USB case. >> > >> > Do the driver really need dynamic PCM since display ports are dasiy > chained >> > and the locations within the dasiy chain are fixed ? > > http://www.intel.com/support/motherboards/desktop/sb/CS-034199.htm > > Do the first display always support sound since hdmi can connect to tv > using dvi ? I don't see the relevance. > As Pulseaudio does not support multi streaming ( playing different audio > streams to headphone and rear panel speakers , how can pulseaudion support > displayport MST ? Even if it couldn't support multiple streams at the same time, there has to be a way to choose one of the audio capable sinks in the DP MST topology (which will change dynamically). BR, Jani.
diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h index d0509db..3b62ac5 100644 --- a/include/sound/hda_verbs.h +++ b/include/sound/hda_verbs.h @@ -75,6 +75,7 @@ enum { #define AC_VERB_GET_HDMI_CHAN_SLOT 0x0f34 #define AC_VERB_GET_DEVICE_SEL 0xf35 #define AC_VERB_GET_DEVICE_LIST 0xf36 +#define AC_VERB_GET_DP_STREAM_ID 0xf3c /* * SET verbs @@ -115,6 +116,7 @@ enum { #define AC_VERB_SET_HDMI_CP_CTRL 0x733 #define AC_VERB_SET_HDMI_CHAN_SLOT 0x734 #define AC_VERB_SET_DEVICE_SEL 0x735 +#define AC_VERB_SET_DP_STREAM_ID 0x73C /* * Parameter IDs diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 5645481..3981c63 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -482,6 +482,7 @@ int snd_hda_get_devices(struct hda_codec *codec, hda_nid_t nid, } return devices; } +EXPORT_SYMBOL_GPL(snd_hda_get_devices); /* * destructor diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index baaf7ed0..39fac53 100644 --- a/sound/pci/hda/hda_proc.c +++ b/sound/pci/hda/hda_proc.c @@ -644,10 +644,13 @@ static void print_device_list(struct snd_info_buffer *buffer, int i, curr = -1; u8 dev_list[AC_MAX_DEV_LIST_LEN]; int devlist_len; + int dp_s_id; + dp_s_id = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_DP_STREAM_ID, 0); devlist_len = snd_hda_get_devices(codec, nid, dev_list, AC_MAX_DEV_LIST_LEN); - snd_iprintf(buffer, " Devices: %d\n", devlist_len); + snd_iprintf(buffer, " Devices: %d: 0x%x\n", devlist_len, dp_s_id); if (devlist_len <= 0) return; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 5f44f60..8272656 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -68,6 +68,17 @@ struct hdmi_spec_per_cvt { /* max. connections to a widget */ #define HDA_MAX_CONNECTIONS 32 +struct hdmi_spec_per_pin; +#define HDA_MAX_DEVICES 3 +struct hdmi_spec_per_device { + struct hdmi_spec_per_pin *pin; + int device_idx; + struct hdmi_eld sink_eld; +#ifdef CONFIG_PROC_FS + struct snd_info_entry *proc_entry; +#endif +}; + struct hdmi_spec_per_pin { hda_nid_t pin_nid; int num_mux_nids; @@ -76,7 +87,11 @@ struct hdmi_spec_per_pin { hda_nid_t cvt_nid; struct hda_codec *codec; - struct hdmi_eld sink_eld; + + int num_devices; + u8 dev_list[AC_MAX_DEV_LIST_LEN]; + struct hdmi_spec_per_device devices[HDA_MAX_DEVICES]; + struct mutex lock; struct delayed_work work; struct snd_kcontrol *eld_ctl; @@ -86,9 +101,6 @@ struct hdmi_spec_per_pin { bool non_pcm; bool chmap_set; /* channel-map override by ALSA API? */ unsigned char chmap[8]; /* ALSA API channel-map */ -#ifdef CONFIG_PROC_FS - struct snd_info_entry *proc_entry; -#endif }; struct cea_channel_speaker_allocation; @@ -409,7 +421,7 @@ static int hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol, pin_idx = kcontrol->private_value; per_pin = get_pin(spec, pin_idx); - eld = &per_pin->sink_eld; + eld = &per_pin->devices[0].sink_eld; mutex_lock(&per_pin->lock); uinfo->count = eld->eld_valid ? eld->eld_size : 0; @@ -429,7 +441,7 @@ static int hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol, pin_idx = kcontrol->private_value; per_pin = get_pin(spec, pin_idx); - eld = &per_pin->sink_eld; + eld = &per_pin->devices[0].sink_eld; mutex_lock(&per_pin->lock); if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data)) { @@ -549,60 +561,63 @@ static void hdmi_set_channel_count(struct hda_codec *codec, */ #ifdef CONFIG_PROC_FS -static void print_eld_info(struct snd_info_entry *entry, - struct snd_info_buffer *buffer) +static void print_eld_info_device(struct snd_info_entry *entry, + struct snd_info_buffer *buffer) { - struct hdmi_spec_per_pin *per_pin = entry->private_data; + struct hdmi_spec_per_device *per_device = entry->private_data; - mutex_lock(&per_pin->lock); - snd_hdmi_print_eld_info(&per_pin->sink_eld, buffer); - mutex_unlock(&per_pin->lock); + mutex_lock(&per_device->pin->lock); + snd_hdmi_print_eld_info(&per_device->sink_eld, buffer); + mutex_unlock(&per_device->pin->lock); } -static void write_eld_info(struct snd_info_entry *entry, - struct snd_info_buffer *buffer) +static void write_eld_info_device(struct snd_info_entry *entry, + struct snd_info_buffer *buffer) { - struct hdmi_spec_per_pin *per_pin = entry->private_data; + struct hdmi_spec_per_device *per_device = entry->private_data; - mutex_lock(&per_pin->lock); - snd_hdmi_write_eld_info(&per_pin->sink_eld, buffer); - mutex_unlock(&per_pin->lock); + mutex_lock(&per_device->pin->lock); + snd_hdmi_write_eld_info(&per_device->sink_eld, buffer); + mutex_unlock(&per_device->pin->lock); } -static int eld_proc_new(struct hdmi_spec_per_pin *per_pin, int index) +static int eld_device_proc_new(struct hdmi_spec_per_device *per_device, int pin_idx, int dev_idx) { char name[32]; - struct hda_codec *codec = per_pin->codec; + struct hda_codec *codec = per_device->pin->codec; struct snd_info_entry *entry; int err; - snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, index); + if (dev_idx == -1) + snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, pin_idx); + else + snprintf(name, sizeof(name), "eld#%d.%d.%d", codec->addr, pin_idx, dev_idx); err = snd_card_proc_new(codec->card, name, &entry); if (err < 0) return err; - snd_info_set_text_ops(entry, per_pin, print_eld_info); - entry->c.text.write = write_eld_info; + snd_info_set_text_ops(entry, per_device, print_eld_info_device); + entry->c.text.write = write_eld_info_device; entry->mode |= S_IWUSR; - per_pin->proc_entry = entry; + per_device->proc_entry = entry; return 0; } -static void eld_proc_free(struct hdmi_spec_per_pin *per_pin) +static void eld_device_proc_free(struct hdmi_spec_per_device *per_device) { - if (!per_pin->codec->bus->shutdown && per_pin->proc_entry) { - snd_device_free(per_pin->codec->card, per_pin->proc_entry); - per_pin->proc_entry = NULL; + if (!per_device->pin->codec->bus->shutdown && per_device->proc_entry) { + snd_device_free(per_device->pin->codec->card, per_device->proc_entry); + per_device->proc_entry = NULL; } } #else -static inline int eld_proc_new(struct hdmi_spec_per_pin *per_pin, - int index) +static inline int eld_device_proc_new(struct hdmi_spec_per_device *per_device, + int pin_idx, int dev_idx) { return 0; } -static inline void eld_proc_free(struct hdmi_spec_per_pin *per_pin) +static inline void eld_device_proc_free(struct hdmi_spec_per_device *per_device) { } #endif @@ -1112,13 +1127,13 @@ static void hdmi_pin_setup_infoframe(struct hda_codec *codec, static void hdmi_setup_audio_infoframe(struct hda_codec *codec, struct hdmi_spec_per_pin *per_pin, + struct hdmi_eld *eld, bool non_pcm) { struct hdmi_spec *spec = codec->spec; hda_nid_t pin_nid = per_pin->pin_nid; int channels = per_pin->channels; int active_channels; - struct hdmi_eld *eld; int ca, ordered_ca; if (!channels) @@ -1129,7 +1144,8 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); - eld = &per_pin->sink_eld; + if (!eld) + eld = &per_pin->devices[0].sink_eld; if (!non_pcm && per_pin->chmap_set) ca = hdmi_manual_channel_allocation(channels, per_pin->chmap); @@ -1191,7 +1207,7 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) return; jack->jack_dirty = 1; - codec_dbg(codec, + codec_info(codec, "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n", codec->addr, jack->nid, dev_entry, !!(res & AC_UNSOL_RES_IA), !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); @@ -1449,7 +1465,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, if (snd_BUG_ON(pin_idx < 0)) return -EINVAL; per_pin = get_pin(spec, pin_idx); - eld = &per_pin->sink_eld; + eld = &per_pin->devices[0].sink_eld; err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx); if (err < 0) @@ -1530,7 +1546,7 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) struct hda_codec *codec = per_pin->codec; struct hdmi_spec *spec = codec->spec; struct hdmi_eld *eld = &spec->temp_eld; - struct hdmi_eld *pin_eld = &per_pin->sink_eld; + struct hdmi_eld *pin_eld; hda_nid_t pin_nid = per_pin->pin_nid; /* * Always execute a GetPinSense verb here, even when called from @@ -1544,20 +1560,41 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) bool update_eld = false; bool eld_changed = false; bool ret; + int device_num = 0; + bool need_repoll = false; + bool any_eld_valid = false; snd_hda_power_up_pm(codec); present = snd_hda_pin_sense(codec, pin_nid); mutex_lock(&per_pin->lock); - pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); - if (pin_eld->monitor_present) - eld->eld_valid = !!(present & AC_PINSENSE_ELDV); - else - eld->eld_valid = false; - codec_dbg(codec, - "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", - codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid); + if (codec->dp_mst) + per_pin->num_devices = snd_hda_get_devices(codec, pin_nid, per_pin->dev_list, + AC_MAX_DEV_LIST_LEN); +next_device: + pin_eld = &per_pin->devices[device_num].sink_eld; + eld_changed = false; + update_eld = false; + if (per_pin->num_devices) { + pin_eld->monitor_present = !!(per_pin->dev_list[device_num] & AC_DE_PD); + if (pin_eld->monitor_present) + eld->eld_valid = !!(per_pin->dev_list[device_num] & AC_DE_ELDV); + else + eld->eld_valid = false; + if (eld->eld_valid) + snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_DEVICE_SEL, device_num); + } else { + pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); + if (pin_eld->monitor_present) + eld->eld_valid = !!(present & AC_PINSENSE_ELDV); + else + eld->eld_valid = false; + } + + codec_info(codec, + "HDMI status: Codec=%d Pin=%d Device=%d Presence_Detect=%d ELD_Valid=%d\n", + codec->addr, pin_nid, device_num, pin_eld->monitor_present, eld->eld_valid); if (eld->eld_valid) { if (spec->ops.pin_get_eld(codec, pin_nid, eld->eld_buffer, @@ -1573,11 +1610,11 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) if (eld->eld_valid) { snd_hdmi_show_eld(codec, &eld->info); update_eld = true; + any_eld_valid = true; } else if (repoll) { - schedule_delayed_work(&per_pin->work, - msecs_to_jiffies(300)); - goto unlock; + need_repoll = true; + goto skip_to_next_device; } } @@ -1614,7 +1651,7 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) per_pin->mux_idx); } - hdmi_setup_audio_infoframe(codec, per_pin, + hdmi_setup_audio_infoframe(codec, per_pin, eld, per_pin->non_pcm); } } @@ -1623,8 +1660,19 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) snd_ctl_notify(codec->card, SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, &per_pin->eld_ctl->id); - unlock: - ret = !repoll || !pin_eld->monitor_present || pin_eld->eld_valid; +skip_to_next_device: + if (codec->dp_mst) { + device_num++; + if (device_num < per_pin->num_devices) + goto next_device; + } + + if (need_repoll) { + schedule_delayed_work(&per_pin->work, + msecs_to_jiffies(300)); + repoll = true; + } + ret = !repoll || any_eld_valid; jack = snd_hda_jack_tbl_get(codec, pin_nid); if (jack) @@ -1807,7 +1855,7 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, per_pin->channels = substream->runtime->channels; per_pin->setup = true; - hdmi_setup_audio_infoframe(codec, per_pin, non_pcm); + hdmi_setup_audio_infoframe(codec, per_pin, NULL, non_pcm); mutex_unlock(&per_pin->lock); if (spec->dyn_pin_out) { @@ -2035,7 +2083,7 @@ static int hdmi_chmap_ctl_put(struct snd_kcontrol *kcontrol, per_pin->chmap_set = true; memcpy(per_pin->chmap, chmap, sizeof(chmap)); if (prepared) - hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); + hdmi_setup_audio_infoframe(codec, per_pin, NULL, per_pin->non_pcm); mutex_unlock(&per_pin->lock); return 0; @@ -2147,7 +2195,7 @@ static int generic_hdmi_build_controls(struct hda_codec *codec) static int generic_hdmi_init_per_pins(struct hda_codec *codec) { struct hdmi_spec *spec = codec->spec; - int pin_idx; + int pin_idx, dev_idx; for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); @@ -2155,7 +2203,20 @@ static int generic_hdmi_init_per_pins(struct hda_codec *codec) per_pin->codec = codec; mutex_init(&per_pin->lock); INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld); - eld_proc_new(per_pin, pin_idx); + + if (codec->dp_mst) { + for (dev_idx = 0; dev_idx < HDA_MAX_DEVICES; dev_idx++) { + per_pin->devices[dev_idx].device_idx = dev_idx; + per_pin->devices[dev_idx].pin = per_pin; + + eld_device_proc_new(&per_pin->devices[dev_idx], pin_idx, dev_idx); + } + } else { + per_pin->num_devices = 0; + per_pin->devices[0].device_idx = 0; + per_pin->devices[0].pin = per_pin; + eld_device_proc_new(&per_pin->devices[0], pin_idx, -1); + } } return 0; } @@ -2191,13 +2252,19 @@ static void hdmi_array_free(struct hdmi_spec *spec) static void generic_hdmi_free(struct hda_codec *codec) { struct hdmi_spec *spec = codec->spec; - int pin_idx; + int pin_idx, dev_idx; for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); cancel_delayed_work_sync(&per_pin->work); - eld_proc_free(per_pin); + if (per_pin->num_devices) { + for (dev_idx = 0; dev_idx < per_pin->num_devices; dev_idx++) { + struct hdmi_spec_per_device *per_device = &per_pin->devices[dev_idx]; + eld_device_proc_free(per_device); + } + } else + eld_device_proc_free(&per_pin->devices[0]); } hdmi_array_free(spec); @@ -2333,6 +2400,7 @@ static int patch_generic_hdmi(struct hda_codec *codec) if (is_haswell_plus(codec)) { intel_haswell_enable_all_pins(codec, true); intel_haswell_fixup_enable_dp12(codec); + codec->dp_mst = true; } if (is_haswell_plus(codec) || is_valleyview_plus(codec)) @@ -2346,7 +2414,6 @@ static int patch_generic_hdmi(struct hda_codec *codec) codec->patch_ops = generic_hdmi_patch_ops; if (is_haswell_plus(codec)) { codec->patch_ops.set_power_state = haswell_set_power_state; - codec->dp_mst = true; } generic_hdmi_init_per_pins(codec);