@@ -64,12 +64,15 @@
#define FIL1_0 0x1c
#define FIL1_1 0x1d
#define FIL1_2 0x1e
-#define FIL1_3 0x1f
+#define FIL1_3 0x1f /* The maximum valid register for ak4642 */
#define PW_MGMT4 0x20
#define MD_CTL5 0x21
#define LO_MS 0x22
#define HP_MS 0x23
-#define SPK_MS 0x24
+#define SPK_MS 0x24 /* The maximum valid register for ak4643 */
+#define EQ_FBEQAB 0x25
+#define EQ_FBEQCD 0x26
+#define EQ_FBEQE 0x27 /* The maximum valid register for ak4648 */
/* PW_MGMT1*/
#define PMVCM (1 << 6) /* VCOM Power Management */
@@ -241,7 +244,7 @@ static const struct snd_soc_dapm_route ak4642_intercon[] = {
/*
* ak4642 register cache
*/
-static const struct reg_default ak4642_reg[] = {
+static const struct reg_default ak4643_reg[] = {
{ 0, 0x00 }, { 1, 0x00 }, { 2, 0x01 }, { 3, 0x00 },
{ 4, 0x02 }, { 5, 0x00 }, { 6, 0x00 }, { 7, 0x00 },
{ 8, 0xe1 }, { 9, 0xe1 }, { 10, 0x18 }, { 11, 0x00 },
@@ -254,6 +257,14 @@ static const struct reg_default ak4642_reg[] = {
{ 36, 0x00 },
};
+/* The default settings for 0x0 ~ 0x1f registers are the same for ak4642
+ and ak4643. So we reuse the ak4643 reg_default for ak4642.
+ The valid registers for ak4642 are 0x0 ~ 0x1f which is a subset of ak4643,
+ so define NUM_AK4642_REG_DEFAULTS for ak4642.
+*/
+#define ak4642_reg ak4643_reg
+#define NUM_AK4642_REG_DEFAULTS (FIL1_3 + 1)
+
static const struct reg_default ak4648_reg[] = {
{ 0, 0x00 }, { 1, 0x00 }, { 2, 0x01 }, { 3, 0x00 },
{ 4, 0x02 }, { 5, 0x00 }, { 6, 0x00 }, { 7, 0x00 },
@@ -535,15 +546,23 @@ static struct snd_soc_codec_driver soc_codec_dev_ak4642 = {
static const struct regmap_config ak4642_regmap = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = ARRAY_SIZE(ak4642_reg) + 1,
+ .max_register = FIL1_3,
.reg_defaults = ak4642_reg,
- .num_reg_defaults = ARRAY_SIZE(ak4642_reg),
+ .num_reg_defaults = NUM_AK4642_REG_DEFAULTS,
+};
+
+static const struct regmap_config ak4643_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = SPK_MS,
+ .reg_defaults = ak4643_reg,
+ .num_reg_defaults = ARRAY_SIZE(ak4643_reg),
};
static const struct regmap_config ak4648_regmap = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = ARRAY_SIZE(ak4648_reg) + 1,
+ .max_register = EQ_FBEQE,
.reg_defaults = ak4648_reg,
.num_reg_defaults = ARRAY_SIZE(ak4648_reg),
};
@@ -553,7 +572,7 @@ static const struct ak4642_drvdata ak4642_drvdata = {
};
static const struct ak4642_drvdata ak4643_drvdata = {
- .regmap_config = &ak4642_regmap,
+ .regmap_config = &ak4643_regmap,
};
static const struct ak4642_drvdata ak4648_drvdata = {
The max_register setting for ak4642, ak4643 and ak4648 are wrong, fix it. According to the datasheet: the maximum valid register for ak4642 is 0x1f the maximum valid register for ak4643 is 0x24 the maximum valid register for ak4648 is 0x27 The default settings for ak4642 and ak4643 are the same for 0x0 ~ 0x1f registers, so it's fine to use the same reg_default table with differnt num_reg_defaults setting. Signed-off-by: Axel Lin <axel.lin@ingics.com> --- v2: Improve readability by using below defines (with comment). #define ak4642_reg ak4643_reg #define NUM_AK4642_REG_DEFAULTS (FIL1_3 + 1) sound/soc/codecs/ak4642.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-)