diff mbox

arm: dts: ls1021a: Add LTC2945 node for LS1021A TWR board

Message ID 1436150292-15046-1-git-send-email-b18965@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alison Wang July 6, 2015, 2:38 a.m. UTC
From: Jia Hongtao <hongtao.jia@freescale.com>

This patch adds LTC2945 node for LS1021A TWR board.

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
---
 arch/arm/boot/dts/ls1021a-twr.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Hongtao Jia July 6, 2015, 2:57 a.m. UTC | #1
LTC2945 is replaced by INA220 in rev2.0.

Please note it as "Superseded" in patchworks.
Thanks.

---
Best Regards,
Hongtao

> -----Original Message-----
> From: Alison Wang [mailto:b18965@freescale.com]
> Sent: Monday, July 06, 2015 10:38 AM
> To: shawn.guo@linaro.org; Jin Zhengxiong-R64188; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Cc: Jia Hongtao-B38951
> Subject: [PATCH] arm: dts: ls1021a: Add LTC2945 node for LS1021A TWR
> board
> 
> From: Jia Hongtao <hongtao.jia@freescale.com>
> 
> This patch adds LTC2945 node for LS1021A TWR board.
> 
> Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> ---
>  arch/arm/boot/dts/ls1021a-twr.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a-twr.dts
> b/arch/arm/boot/dts/ls1021a-twr.dts
> index a0d9ad6..938b16a 100644
> --- a/arch/arm/boot/dts/ls1021a-twr.dts
> +++ b/arch/arm/boot/dts/ls1021a-twr.dts
> @@ -160,6 +160,13 @@
>  	};
>  };
> 
> +&i2c2 {
> +	status = "okay";
> +	monitor: ltc2945@67 {
> +		reg = <0x67>;
> +	};
> +};
> +
>  &ifc {
>  	#address-cells = <2>;
>  	#size-cells = <1>;
> --
> 2.1.0.27.g96db324
diff mbox

Patch

diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a0d9ad6..938b16a 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -160,6 +160,13 @@ 
 	};
 };
 
+&i2c2 {
+	status = "okay";
+	monitor: ltc2945@67 {
+		reg = <0x67>;
+	};
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;