| Message ID | 9e352cbe2feac01158a21511bac5c544dc2f29e2.1434398373.git.ashwin.chaugule@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: > The ACPI processor driver is currently tied too closely > to the ACPI C-states (CST), P-states (PSS) and other related > constructs for controlling CPU idle and CPU performance. > > The newer ACPI specification (v5.1 onwards) introduces > alternative methods to CST and PSS. These new mechanisms > are described within each ACPI Processor object and so they > need to be scanned whenever a new Processor object is detected. > This patch introduces two new Kconfig symbols to allow for > finer configurability among the various options for controlling > CPU idle and performance states. There is no change in functionality > and these options are defaulted to enabled to maintain previous > behaviour. > > The following patchwork introduces CPPC: A newer method of > controlling CPU performance. The OS is not expected to support CPPC > and PSS at runtime. So the kconfig option lets us make these two > mutually exclusive at compile time. > > Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> > Reviewed-by: Al Stone <al.stone@linaro.org> > --- > drivers/acpi/Kconfig | 31 +++++++++-- > drivers/acpi/Makefile | 7 ++- > drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- > drivers/cpufreq/Kconfig | 2 +- > drivers/cpufreq/Kconfig.x86 | 2 + > include/acpi/processor.h | 120 ++++++++++++++++++++++++++++------------ > 6 files changed, 176 insertions(+), 72 deletions(-) > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index ab2cbb5..5942754 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -166,18 +166,39 @@ config ACPI_DOCK > This driver supports ACPI-controlled docking stations and removable > drive bays such as the IBM Ultrabay and the Dell Module Bay. > > -config ACPI_PROCESSOR > - tristate "Processor" > - select THERMAL > - select CPU_IDLE > +config ACPI_CST > + bool "ACPI C states (CST) driver" > + depends on ACPI_PROCESSOR > depends on X86 || IA64 > + select CPU_IDLE > default y > help > This driver installs ACPI as the idle handler for Linux and uses > ACPI C2 and C3 processor states to save power on systems that > - support it. It is required by several flavors of cpufreq > + support it. > + > +config ACPI_PSS > + bool "ACPI P States (PSS) driver" > + depends on ACPI_PROCESSOR > + depends on X86 || IA64 > + select THERMAL > + default y > + help > + This driver implements ACPI methods for controlling CPU performance > + using PSS methods as described in the ACPI spec. It also enables support > + for ACPI based performance throttling (TSS) and ACPI based thermal > + monitoring. It is required by several flavors of cpufreq > performance-state drivers. For starters, I don't like these new Kconfig options. Isn't there a way to implement what you need without adding them? Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: > On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >> The ACPI processor driver is currently tied too closely >> to the ACPI C-states (CST), P-states (PSS) and other related >> constructs for controlling CPU idle and CPU performance. >> >> The newer ACPI specification (v5.1 onwards) introduces >> alternative methods to CST and PSS. These new mechanisms >> are described within each ACPI Processor object and so they >> need to be scanned whenever a new Processor object is detected. >> This patch introduces two new Kconfig symbols to allow for >> finer configurability among the various options for controlling >> CPU idle and performance states. There is no change in functionality >> and these options are defaulted to enabled to maintain previous >> behaviour. >> >> The following patchwork introduces CPPC: A newer method of >> controlling CPU performance. The OS is not expected to support CPPC >> and PSS at runtime. So the kconfig option lets us make these two >> mutually exclusive at compile time. >> >> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >> Reviewed-by: Al Stone <al.stone@linaro.org> >> --- >> drivers/acpi/Kconfig | 31 +++++++++-- >> drivers/acpi/Makefile | 7 ++- >> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >> drivers/cpufreq/Kconfig | 2 +- >> drivers/cpufreq/Kconfig.x86 | 2 + >> include/acpi/processor.h | 120 ++++++++++++++++++++++++++++------------ >> 6 files changed, 176 insertions(+), 72 deletions(-) >> >> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >> index ab2cbb5..5942754 100644 >> --- a/drivers/acpi/Kconfig >> +++ b/drivers/acpi/Kconfig >> @@ -166,18 +166,39 @@ config ACPI_DOCK >> This driver supports ACPI-controlled docking stations and removable >> drive bays such as the IBM Ultrabay and the Dell Module Bay. >> >> -config ACPI_PROCESSOR >> - tristate "Processor" >> - select THERMAL >> - select CPU_IDLE >> +config ACPI_CST >> + bool "ACPI C states (CST) driver" >> + depends on ACPI_PROCESSOR >> depends on X86 || IA64 >> + select CPU_IDLE >> default y >> help >> This driver installs ACPI as the idle handler for Linux and uses >> ACPI C2 and C3 processor states to save power on systems that >> - support it. It is required by several flavors of cpufreq >> + support it. >> + >> +config ACPI_PSS >> + bool "ACPI P States (PSS) driver" >> + depends on ACPI_PROCESSOR >> + depends on X86 || IA64 >> + select THERMAL >> + default y >> + help >> + This driver implements ACPI methods for controlling CPU performance >> + using PSS methods as described in the ACPI spec. It also enables support >> + for ACPI based performance throttling (TSS) and ACPI based thermal >> + monitoring. It is required by several flavors of cpufreq >> performance-state drivers. > > For starters, I don't like these new Kconfig options. > > Isn't there a way to implement what you need without adding them? We need to use the ACPI Processor driver for CPPC without including all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming LPI work from Sudeep will also face the same issue. I considered the alternative of adding a probe routine which matches ACPI_PROCESSOR_OBJECT/DEVICE_HID to each driver, but this seemed like a better option. Do you have any other ideas? Thanks, Ashwin. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ashwin, On Wed, Jul 8, 2015 at 3:27 AM, Ashwin Chaugule <ashwin.chaugule@linaro.org> wrote: > On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >> On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >>> The ACPI processor driver is currently tied too closely >>> to the ACPI C-states (CST), P-states (PSS) and other related >>> constructs for controlling CPU idle and CPU performance. >>> >>> The newer ACPI specification (v5.1 onwards) introduces >>> alternative methods to CST and PSS. These new mechanisms >>> are described within each ACPI Processor object and so they >>> need to be scanned whenever a new Processor object is detected. >>> This patch introduces two new Kconfig symbols to allow for >>> finer configurability among the various options for controlling >>> CPU idle and performance states. There is no change in functionality >>> and these options are defaulted to enabled to maintain previous >>> behaviour. >>> >>> The following patchwork introduces CPPC: A newer method of >>> controlling CPU performance. The OS is not expected to support CPPC >>> and PSS at runtime. So the kconfig option lets us make these two >>> mutually exclusive at compile time. >>> >>> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >>> Reviewed-by: Al Stone <al.stone@linaro.org> >>> --- >>> drivers/acpi/Kconfig | 31 +++++++++-- >>> drivers/acpi/Makefile | 7 ++- >>> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >>> drivers/cpufreq/Kconfig | 2 +- >>> drivers/cpufreq/Kconfig.x86 | 2 + >>> include/acpi/processor.h | 120 ++++++++++++++++++++++++++++------------ >>> 6 files changed, 176 insertions(+), 72 deletions(-) >>> >>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>> index ab2cbb5..5942754 100644 >>> --- a/drivers/acpi/Kconfig >>> +++ b/drivers/acpi/Kconfig >>> @@ -166,18 +166,39 @@ config ACPI_DOCK >>> This driver supports ACPI-controlled docking stations and removable >>> drive bays such as the IBM Ultrabay and the Dell Module Bay. >>> >>> -config ACPI_PROCESSOR >>> - tristate "Processor" >>> - select THERMAL >>> - select CPU_IDLE >>> +config ACPI_CST >>> + bool "ACPI C states (CST) driver" >>> + depends on ACPI_PROCESSOR >>> depends on X86 || IA64 >>> + select CPU_IDLE >>> default y >>> help >>> This driver installs ACPI as the idle handler for Linux and uses >>> ACPI C2 and C3 processor states to save power on systems that >>> - support it. It is required by several flavors of cpufreq >>> + support it. >>> + >>> +config ACPI_PSS >>> + bool "ACPI P States (PSS) driver" >>> + depends on ACPI_PROCESSOR >>> + depends on X86 || IA64 >>> + select THERMAL >>> + default y >>> + help >>> + This driver implements ACPI methods for controlling CPU performance >>> + using PSS methods as described in the ACPI spec. It also enables support >>> + for ACPI based performance throttling (TSS) and ACPI based thermal >>> + monitoring. It is required by several flavors of cpufreq >>> performance-state drivers. >> >> For starters, I don't like these new Kconfig options. >> >> Isn't there a way to implement what you need without adding them? > > We need to use the ACPI Processor driver for CPPC without including > all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming > LPI work from Sudeep will also face the same issue. I considered the > alternative of adding a probe routine which matches > ACPI_PROCESSOR_OBJECT/DEVICE_HID to each driver, but this seemed like > a better option. Do you have any other ideas? First of all, I don't see what _CST has to do with CPPC. Second, it looks like the problem is that x86 probably won't use CPPC, while arm64 probably won't use _PSS. That can be addressed by adding Kconfig options, but those options should not be user-selectable (because quite honestly users don't have to know what those things are and they don't care *and* things break if they make a wrong choice). Instead, I'd make architecture Kconfigs select those options automatically. Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On 8 July 2015 at 09:34, Rafael J. Wysocki <rafael@kernel.org> wrote: > Hi Ashwin, > > On Wed, Jul 8, 2015 at 3:27 AM, Ashwin Chaugule > <ashwin.chaugule@linaro.org> wrote: >> On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >>> On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >>>> The ACPI processor driver is currently tied too closely >>>> to the ACPI C-states (CST), P-states (PSS) and other related >>>> constructs for controlling CPU idle and CPU performance. >>>> >>>> The newer ACPI specification (v5.1 onwards) introduces >>>> alternative methods to CST and PSS. These new mechanisms >>>> are described within each ACPI Processor object and so they >>>> need to be scanned whenever a new Processor object is detected. >>>> This patch introduces two new Kconfig symbols to allow for >>>> finer configurability among the various options for controlling >>>> CPU idle and performance states. There is no change in functionality >>>> and these options are defaulted to enabled to maintain previous >>>> behaviour. >>>> >>>> The following patchwork introduces CPPC: A newer method of >>>> controlling CPU performance. The OS is not expected to support CPPC >>>> and PSS at runtime. So the kconfig option lets us make these two >>>> mutually exclusive at compile time. >>>> >>>> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >>>> Reviewed-by: Al Stone <al.stone@linaro.org> >>>> --- >>>> drivers/acpi/Kconfig | 31 +++++++++-- >>>> drivers/acpi/Makefile | 7 ++- >>>> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >>>> drivers/cpufreq/Kconfig | 2 +- >>>> drivers/cpufreq/Kconfig.x86 | 2 + >>>> include/acpi/processor.h | 120 ++++++++++++++++++++++++++++------------ >>>> 6 files changed, 176 insertions(+), 72 deletions(-) >>>> >>>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>>> index ab2cbb5..5942754 100644 >>>> --- a/drivers/acpi/Kconfig >>>> +++ b/drivers/acpi/Kconfig >>>> @@ -166,18 +166,39 @@ config ACPI_DOCK >>>> This driver supports ACPI-controlled docking stations and removable >>>> drive bays such as the IBM Ultrabay and the Dell Module Bay. >>>> >>>> -config ACPI_PROCESSOR >>>> - tristate "Processor" >>>> - select THERMAL >>>> - select CPU_IDLE >>>> +config ACPI_CST >>>> + bool "ACPI C states (CST) driver" >>>> + depends on ACPI_PROCESSOR >>>> depends on X86 || IA64 >>>> + select CPU_IDLE >>>> default y >>>> help >>>> This driver installs ACPI as the idle handler for Linux and uses >>>> ACPI C2 and C3 processor states to save power on systems that >>>> - support it. It is required by several flavors of cpufreq >>>> + support it. >>>> + >>>> +config ACPI_PSS >>>> + bool "ACPI P States (PSS) driver" >>>> + depends on ACPI_PROCESSOR >>>> + depends on X86 || IA64 >>>> + select THERMAL >>>> + default y >>>> + help >>>> + This driver implements ACPI methods for controlling CPU performance >>>> + using PSS methods as described in the ACPI spec. It also enables support >>>> + for ACPI based performance throttling (TSS) and ACPI based thermal >>>> + monitoring. It is required by several flavors of cpufreq >>>> performance-state drivers. >>> >>> For starters, I don't like these new Kconfig options. >>> >>> Isn't there a way to implement what you need without adding them? >> >> We need to use the ACPI Processor driver for CPPC without including >> all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming >> LPI work from Sudeep will also face the same issue. I considered the >> alternative of adding a probe routine which matches >> ACPI_PROCESSOR_OBJECT/DEVICE_HID to each driver, but this seemed like >> a better option. Do you have any other ideas? > > First of all, I don't see what _CST has to do with CPPC. Agree, it doesn't. I was implying that the current acpi processor driver is tied to CST as well. CST and CPPC can co-exist. But Sudeep's LPI patchwork would need to separate CST out of the processor driver anyway. He actually proposed a similar-ish solution a while back. > > Second, it looks like the problem is that x86 probably won't use CPPC, > while arm64 probably won't use _PSS. Yep. > > That can be addressed by adding Kconfig options, but those options > should not be user-selectable (because quite honestly users don't have > to know what those things are and they don't care *and* things break > if they make a wrong choice). Instead, I'd make architecture Kconfigs > select those options automatically. Ok. I'll look into moving these config options into the ARCH_HAS_ .. sort of variants. Thanks, Ashwin. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/07/15 02:27, Ashwin Chaugule wrote: > On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >> On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >>> The ACPI processor driver is currently tied too closely >>> to the ACPI C-states (CST), P-states (PSS) and other related >>> constructs for controlling CPU idle and CPU performance. >>> >>> The newer ACPI specification (v5.1 onwards) introduces >>> alternative methods to CST and PSS. These new mechanisms >>> are described within each ACPI Processor object and so they >>> need to be scanned whenever a new Processor object is detected. >>> This patch introduces two new Kconfig symbols to allow for >>> finer configurability among the various options for controlling >>> CPU idle and performance states. There is no change in functionality >>> and these options are defaulted to enabled to maintain previous >>> behaviour. >>> >>> The following patchwork introduces CPPC: A newer method of >>> controlling CPU performance. The OS is not expected to support CPPC >>> and PSS at runtime. So the kconfig option lets us make these two >>> mutually exclusive at compile time. >>> >>> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >>> Reviewed-by: Al Stone <al.stone@linaro.org> >>> --- >>> drivers/acpi/Kconfig | 31 +++++++++-- >>> drivers/acpi/Makefile | 7 ++- >>> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >>> drivers/cpufreq/Kconfig | 2 +- >>> drivers/cpufreq/Kconfig.x86 | 2 + >>> include/acpi/processor.h | 120 ++++++++++++++++++++++++++++------------ >>> 6 files changed, 176 insertions(+), 72 deletions(-) >>> >>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>> index ab2cbb5..5942754 100644 >>> --- a/drivers/acpi/Kconfig >>> +++ b/drivers/acpi/Kconfig >>> @@ -166,18 +166,39 @@ config ACPI_DOCK >>> This driver supports ACPI-controlled docking stations and removable >>> drive bays such as the IBM Ultrabay and the Dell Module Bay. >>> >>> -config ACPI_PROCESSOR >>> - tristate "Processor" >>> - select THERMAL >>> - select CPU_IDLE >>> +config ACPI_CST >>> + bool "ACPI C states (CST) driver" >>> + depends on ACPI_PROCESSOR >>> depends on X86 || IA64 >>> + select CPU_IDLE >>> default y >>> help >>> This driver installs ACPI as the idle handler for Linux and uses >>> ACPI C2 and C3 processor states to save power on systems that >>> - support it. It is required by several flavors of cpufreq >>> + support it. >>> + >>> +config ACPI_PSS >>> + bool "ACPI P States (PSS) driver" >>> + depends on ACPI_PROCESSOR >>> + depends on X86 || IA64 >>> + select THERMAL >>> + default y >>> + help >>> + This driver implements ACPI methods for controlling CPU performance >>> + using PSS methods as described in the ACPI spec. It also enables support >>> + for ACPI based performance throttling (TSS) and ACPI based thermal >>> + monitoring. It is required by several flavors of cpufreq >>> performance-state drivers. >> >> For starters, I don't like these new Kconfig options. >> >> Isn't there a way to implement what you need without adding them? > > We need to use the ACPI Processor driver for CPPC without including > all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming > LPI work from Sudeep will also face the same issue. Ashwin, I am trying to keep Kconfig options minimum, iff necessary and selected by ARCH code(i.e. not user selectable). Also I am not entirely sure if we need to make PSS and CPPC mutually exclusive. I had seen patches to support PSS on ARM and if we have to support single Image to handle both they can't be exclusive. Regards, Sudeep -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sudeep, On 8 July 2015 at 09:43, Sudeep Holla <sudeep.holla@arm.com> wrote: > > > On 08/07/15 02:27, Ashwin Chaugule wrote: >> >> On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >>> >>> On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >>>> >>>> The ACPI processor driver is currently tied too closely >>>> to the ACPI C-states (CST), P-states (PSS) and other related >>>> constructs for controlling CPU idle and CPU performance. >>>> >>>> The newer ACPI specification (v5.1 onwards) introduces >>>> alternative methods to CST and PSS. These new mechanisms >>>> are described within each ACPI Processor object and so they >>>> need to be scanned whenever a new Processor object is detected. >>>> This patch introduces two new Kconfig symbols to allow for >>>> finer configurability among the various options for controlling >>>> CPU idle and performance states. There is no change in functionality >>>> and these options are defaulted to enabled to maintain previous >>>> behaviour. >>>> >>>> The following patchwork introduces CPPC: A newer method of >>>> controlling CPU performance. The OS is not expected to support CPPC >>>> and PSS at runtime. So the kconfig option lets us make these two >>>> mutually exclusive at compile time. >>>> >>>> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >>>> Reviewed-by: Al Stone <al.stone@linaro.org> >>>> --- >>>> drivers/acpi/Kconfig | 31 +++++++++-- >>>> drivers/acpi/Makefile | 7 ++- >>>> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >>>> drivers/cpufreq/Kconfig | 2 +- >>>> drivers/cpufreq/Kconfig.x86 | 2 + >>>> include/acpi/processor.h | 120 >>>> ++++++++++++++++++++++++++++------------ >>>> 6 files changed, 176 insertions(+), 72 deletions(-) >>>> >>>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>>> index ab2cbb5..5942754 100644 >>>> --- a/drivers/acpi/Kconfig >>>> +++ b/drivers/acpi/Kconfig >>>> @@ -166,18 +166,39 @@ config ACPI_DOCK >>>> This driver supports ACPI-controlled docking stations and >>>> removable >>>> drive bays such as the IBM Ultrabay and the Dell Module Bay. >>>> >>>> -config ACPI_PROCESSOR >>>> - tristate "Processor" >>>> - select THERMAL >>>> - select CPU_IDLE >>>> +config ACPI_CST >>>> + bool "ACPI C states (CST) driver" >>>> + depends on ACPI_PROCESSOR >>>> depends on X86 || IA64 >>>> + select CPU_IDLE >>>> default y >>>> help >>>> This driver installs ACPI as the idle handler for Linux and >>>> uses >>>> ACPI C2 and C3 processor states to save power on systems that >>>> - support it. It is required by several flavors of cpufreq >>>> + support it. >>>> + >>>> +config ACPI_PSS >>>> + bool "ACPI P States (PSS) driver" >>>> + depends on ACPI_PROCESSOR >>>> + depends on X86 || IA64 >>>> + select THERMAL >>>> + default y >>>> + help >>>> + This driver implements ACPI methods for controlling CPU >>>> performance >>>> + using PSS methods as described in the ACPI spec. It also enables >>>> support >>>> + for ACPI based performance throttling (TSS) and ACPI based >>>> thermal >>>> + monitoring. It is required by several flavors of cpufreq >>>> performance-state drivers. >>> >>> >>> For starters, I don't like these new Kconfig options. >>> >>> Isn't there a way to implement what you need without adding them? >> >> >> We need to use the ACPI Processor driver for CPPC without including >> all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming >> LPI work from Sudeep will also face the same issue. > > > Ashwin, I am trying to keep Kconfig options minimum, iff necessary and > selected by ARCH code(i.e. not user selectable). Also I am not entirely > sure if we need to make PSS and CPPC mutually exclusive. Agree. Moving this to ARCH does seem like a better option. I need to explore that some more. Per the ACPI spec, the OS is not expected to support PSS and CPPC at runtime. I want to avoid getting into whitelist/blacklist issues which would be inevitable if we keep both available at runtime. Some of the X86 drivers run into this already. > > I had seen patches to support PSS on ARM and if we have to support > single Image to handle both they can't be exclusive. Theres been one attempt about 1.5 years ago and AFAIK those folks have completely backed out of the ARM64 Server space . ;) We can revisit when someone proposes a more recent solution for PSS on ARM64. It shouldn't be too hard to change the Kconfig dependencies accordingly. Regards, Ashwin. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/07/15 14:56, Ashwin Chaugule wrote: > Hi Sudeep, > > On 8 July 2015 at 09:43, Sudeep Holla <sudeep.holla@arm.com> wrote: >> >> >> On 08/07/15 02:27, Ashwin Chaugule wrote: >>> >>> On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >>>> >>>> On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >>>>> >>>>> The ACPI processor driver is currently tied too closely >>>>> to the ACPI C-states (CST), P-states (PSS) and other related >>>>> constructs for controlling CPU idle and CPU performance. >>>>> >>>>> The newer ACPI specification (v5.1 onwards) introduces >>>>> alternative methods to CST and PSS. These new mechanisms >>>>> are described within each ACPI Processor object and so they >>>>> need to be scanned whenever a new Processor object is detected. >>>>> This patch introduces two new Kconfig symbols to allow for >>>>> finer configurability among the various options for controlling >>>>> CPU idle and performance states. There is no change in functionality >>>>> and these options are defaulted to enabled to maintain previous >>>>> behaviour. >>>>> >>>>> The following patchwork introduces CPPC: A newer method of >>>>> controlling CPU performance. The OS is not expected to support CPPC >>>>> and PSS at runtime. So the kconfig option lets us make these two >>>>> mutually exclusive at compile time. >>>>> >>>>> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >>>>> Reviewed-by: Al Stone <al.stone@linaro.org> >>>>> --- >>>>> drivers/acpi/Kconfig | 31 +++++++++-- >>>>> drivers/acpi/Makefile | 7 ++- >>>>> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >>>>> drivers/cpufreq/Kconfig | 2 +- >>>>> drivers/cpufreq/Kconfig.x86 | 2 + >>>>> include/acpi/processor.h | 120 >>>>> ++++++++++++++++++++++++++++------------ >>>>> 6 files changed, 176 insertions(+), 72 deletions(-) >>>>> >>>>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>>>> index ab2cbb5..5942754 100644 >>>>> --- a/drivers/acpi/Kconfig >>>>> +++ b/drivers/acpi/Kconfig >>>>> @@ -166,18 +166,39 @@ config ACPI_DOCK >>>>> This driver supports ACPI-controlled docking stations and >>>>> removable >>>>> drive bays such as the IBM Ultrabay and the Dell Module Bay. >>>>> >>>>> -config ACPI_PROCESSOR >>>>> - tristate "Processor" >>>>> - select THERMAL >>>>> - select CPU_IDLE >>>>> +config ACPI_CST >>>>> + bool "ACPI C states (CST) driver" >>>>> + depends on ACPI_PROCESSOR >>>>> depends on X86 || IA64 >>>>> + select CPU_IDLE >>>>> default y >>>>> help >>>>> This driver installs ACPI as the idle handler for Linux and >>>>> uses >>>>> ACPI C2 and C3 processor states to save power on systems that >>>>> - support it. It is required by several flavors of cpufreq >>>>> + support it. >>>>> + >>>>> +config ACPI_PSS >>>>> + bool "ACPI P States (PSS) driver" >>>>> + depends on ACPI_PROCESSOR >>>>> + depends on X86 || IA64 >>>>> + select THERMAL >>>>> + default y >>>>> + help >>>>> + This driver implements ACPI methods for controlling CPU >>>>> performance >>>>> + using PSS methods as described in the ACPI spec. It also enables >>>>> support >>>>> + for ACPI based performance throttling (TSS) and ACPI based >>>>> thermal >>>>> + monitoring. It is required by several flavors of cpufreq >>>>> performance-state drivers. >>>> >>>> >>>> For starters, I don't like these new Kconfig options. >>>> >>>> Isn't there a way to implement what you need without adding them? >>> >>> >>> We need to use the ACPI Processor driver for CPPC without including >>> all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming >>> LPI work from Sudeep will also face the same issue. >> >> >> Ashwin, I am trying to keep Kconfig options minimum, iff necessary and >> selected by ARCH code(i.e. not user selectable). Also I am not entirely >> sure if we need to make PSS and CPPC mutually exclusive. > > Agree. Moving this to ARCH does seem like a better option. I need to > explore that some more. Per the ACPI spec, the OS is not expected to > support PSS and CPPC at runtime. I want to avoid getting into > whitelist/blacklist issues which would be inevitable if we keep both > available at runtime. Some of the X86 drivers run into this already. > OK, but as you say, both still be enabled statically while only one of then should be active at run-time. >> >> I had seen patches to support PSS on ARM and if we have to support >> single Image to handle both they can't be exclusive. > > Theres been one attempt about 1.5 years ago and AFAIK those folks have > completely backed out of the ARM64 Server space . ;) We can revisit > when someone proposes a more recent solution for PSS on ARM64. It > shouldn't be too hard to change the Kconfig dependencies accordingly. > While I too can only guess that they have backed off, since CPPC requires firmware, and if the hardware has PSS like interface, I can imagine vendors pushing for that for convenience, so I would not rule that out completely. But I agree as along as it can be changed easily, we can defer that until there's a real hardware. Regards, Sudeep -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rafael, On 8 July 2015 at 09:34, Rafael J. Wysocki <rafael@kernel.org> wrote: > Hi Ashwin, > > On Wed, Jul 8, 2015 at 3:27 AM, Ashwin Chaugule > <ashwin.chaugule@linaro.org> wrote: >> On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >>> On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >>>> The ACPI processor driver is currently tied too closely >>>> to the ACPI C-states (CST), P-states (PSS) and other related >>>> constructs for controlling CPU idle and CPU performance. >>>> >>>> The newer ACPI specification (v5.1 onwards) introduces >>>> alternative methods to CST and PSS. These new mechanisms >>>> are described within each ACPI Processor object and so they >>>> need to be scanned whenever a new Processor object is detected. >>>> This patch introduces two new Kconfig symbols to allow for >>>> finer configurability among the various options for controlling >>>> CPU idle and performance states. There is no change in functionality >>>> and these options are defaulted to enabled to maintain previous >>>> behaviour. >>>> >>>> The following patchwork introduces CPPC: A newer method of >>>> controlling CPU performance. The OS is not expected to support CPPC >>>> and PSS at runtime. So the kconfig option lets us make these two >>>> mutually exclusive at compile time. >>>> >>>> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >>>> Reviewed-by: Al Stone <al.stone@linaro.org> >>>> --- >>>> drivers/acpi/Kconfig | 31 +++++++++-- >>>> drivers/acpi/Makefile | 7 ++- >>>> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >>>> drivers/cpufreq/Kconfig | 2 +- >>>> drivers/cpufreq/Kconfig.x86 | 2 + >>>> include/acpi/processor.h | 120 ++++++++++++++++++++++++++++------------ >>>> 6 files changed, 176 insertions(+), 72 deletions(-) >>>> >>>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>>> index ab2cbb5..5942754 100644 >>>> --- a/drivers/acpi/Kconfig >>>> +++ b/drivers/acpi/Kconfig >>>> @@ -166,18 +166,39 @@ config ACPI_DOCK >>>> This driver supports ACPI-controlled docking stations and removable >>>> drive bays such as the IBM Ultrabay and the Dell Module Bay. >>>> >>>> -config ACPI_PROCESSOR >>>> - tristate "Processor" >>>> - select THERMAL >>>> - select CPU_IDLE >>>> +config ACPI_CST >>>> + bool "ACPI C states (CST) driver" >>>> + depends on ACPI_PROCESSOR >>>> depends on X86 || IA64 >>>> + select CPU_IDLE >>>> default y >>>> help >>>> This driver installs ACPI as the idle handler for Linux and uses >>>> ACPI C2 and C3 processor states to save power on systems that >>>> - support it. It is required by several flavors of cpufreq >>>> + support it. >>>> + >>>> +config ACPI_PSS >>>> + bool "ACPI P States (PSS) driver" >>>> + depends on ACPI_PROCESSOR >>>> + depends on X86 || IA64 >>>> + select THERMAL >>>> + default y >>>> + help >>>> + This driver implements ACPI methods for controlling CPU performance >>>> + using PSS methods as described in the ACPI spec. It also enables support >>>> + for ACPI based performance throttling (TSS) and ACPI based thermal >>>> + monitoring. It is required by several flavors of cpufreq >>>> performance-state drivers. >>> >>> For starters, I don't like these new Kconfig options. >>> >>> Isn't there a way to implement what you need without adding them? >> >> We need to use the ACPI Processor driver for CPPC without including >> all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming >> LPI work from Sudeep will also face the same issue. I considered the >> alternative of adding a probe routine which matches >> ACPI_PROCESSOR_OBJECT/DEVICE_HID to each driver, but this seemed like >> a better option. Do you have any other ideas? > > First of all, I don't see what _CST has to do with CPPC. > > Second, it looks like the problem is that x86 probably won't use CPPC, > while arm64 probably won't use _PSS. > > That can be addressed by adding Kconfig options, but those options > should not be user-selectable (because quite honestly users don't have > to know what those things are and they don't care *and* things break > if they make a wrong choice). Instead, I'd make architecture Kconfigs > select those options automatically. > I've made changes locally. Basically s/ACPI_PSS/HAVE_ACPI_PSS/ and in arch/x86/Kconfig; select HAVE_ACPI_PSS if ACPI. Similarly for CST. Just wanted to check if there were any other comments before sending out v7. Thanks, Ashwin. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ashwin, On Wed, Jul 8, 2015 at 9:16 PM, Ashwin Chaugule <ashwin.chaugule@linaro.org> wrote: > Hi Rafael, > > On 8 July 2015 at 09:34, Rafael J. Wysocki <rafael@kernel.org> wrote: >> Hi Ashwin, >> >> On Wed, Jul 8, 2015 at 3:27 AM, Ashwin Chaugule >> <ashwin.chaugule@linaro.org> wrote: >>> On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >>>> On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote: >>>>> The ACPI processor driver is currently tied too closely >>>>> to the ACPI C-states (CST), P-states (PSS) and other related >>>>> constructs for controlling CPU idle and CPU performance. >>>>> >>>>> The newer ACPI specification (v5.1 onwards) introduces >>>>> alternative methods to CST and PSS. These new mechanisms >>>>> are described within each ACPI Processor object and so they >>>>> need to be scanned whenever a new Processor object is detected. >>>>> This patch introduces two new Kconfig symbols to allow for >>>>> finer configurability among the various options for controlling >>>>> CPU idle and performance states. There is no change in functionality >>>>> and these options are defaulted to enabled to maintain previous >>>>> behaviour. >>>>> >>>>> The following patchwork introduces CPPC: A newer method of >>>>> controlling CPU performance. The OS is not expected to support CPPC >>>>> and PSS at runtime. So the kconfig option lets us make these two >>>>> mutually exclusive at compile time. >>>>> >>>>> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> >>>>> Reviewed-by: Al Stone <al.stone@linaro.org> >>>>> --- >>>>> drivers/acpi/Kconfig | 31 +++++++++-- >>>>> drivers/acpi/Makefile | 7 ++- >>>>> drivers/acpi/processor_driver.c | 86 ++++++++++++++++++---------- >>>>> drivers/cpufreq/Kconfig | 2 +- >>>>> drivers/cpufreq/Kconfig.x86 | 2 + >>>>> include/acpi/processor.h | 120 ++++++++++++++++++++++++++++------------ >>>>> 6 files changed, 176 insertions(+), 72 deletions(-) >>>>> >>>>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>>>> index ab2cbb5..5942754 100644 >>>>> --- a/drivers/acpi/Kconfig >>>>> +++ b/drivers/acpi/Kconfig >>>>> @@ -166,18 +166,39 @@ config ACPI_DOCK >>>>> This driver supports ACPI-controlled docking stations and removable >>>>> drive bays such as the IBM Ultrabay and the Dell Module Bay. >>>>> >>>>> -config ACPI_PROCESSOR >>>>> - tristate "Processor" >>>>> - select THERMAL >>>>> - select CPU_IDLE >>>>> +config ACPI_CST >>>>> + bool "ACPI C states (CST) driver" >>>>> + depends on ACPI_PROCESSOR >>>>> depends on X86 || IA64 >>>>> + select CPU_IDLE >>>>> default y >>>>> help >>>>> This driver installs ACPI as the idle handler for Linux and uses >>>>> ACPI C2 and C3 processor states to save power on systems that >>>>> - support it. It is required by several flavors of cpufreq >>>>> + support it. >>>>> + >>>>> +config ACPI_PSS >>>>> + bool "ACPI P States (PSS) driver" >>>>> + depends on ACPI_PROCESSOR >>>>> + depends on X86 || IA64 >>>>> + select THERMAL >>>>> + default y >>>>> + help >>>>> + This driver implements ACPI methods for controlling CPU performance >>>>> + using PSS methods as described in the ACPI spec. It also enables support >>>>> + for ACPI based performance throttling (TSS) and ACPI based thermal >>>>> + monitoring. It is required by several flavors of cpufreq >>>>> performance-state drivers. >>>> >>>> For starters, I don't like these new Kconfig options. >>>> >>>> Isn't there a way to implement what you need without adding them? >>> >>> We need to use the ACPI Processor driver for CPPC without including >>> all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming >>> LPI work from Sudeep will also face the same issue. I considered the >>> alternative of adding a probe routine which matches >>> ACPI_PROCESSOR_OBJECT/DEVICE_HID to each driver, but this seemed like >>> a better option. Do you have any other ideas? >> >> First of all, I don't see what _CST has to do with CPPC. >> >> Second, it looks like the problem is that x86 probably won't use CPPC, >> while arm64 probably won't use _PSS. >> >> That can be addressed by adding Kconfig options, but those options >> should not be user-selectable (because quite honestly users don't have >> to know what those things are and they don't care *and* things break >> if they make a wrong choice). Instead, I'd make architecture Kconfigs >> select those options automatically. >> > > I've made changes locally. Basically s/ACPI_PSS/HAVE_ACPI_PSS/ and in > arch/x86/Kconfig; select HAVE_ACPI_PSS if ACPI. Similarly for CST. > Just wanted to check if there were any other comments before sending > out v7. Can you please just send the new version of the $subject patch alone for now? Also I'm still unsure what the connection between _CST and CPPC is. Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ab2cbb5..5942754 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -166,18 +166,39 @@ config ACPI_DOCK This driver supports ACPI-controlled docking stations and removable drive bays such as the IBM Ultrabay and the Dell Module Bay. -config ACPI_PROCESSOR - tristate "Processor" - select THERMAL - select CPU_IDLE +config ACPI_CST + bool "ACPI C states (CST) driver" + depends on ACPI_PROCESSOR depends on X86 || IA64 + select CPU_IDLE default y help This driver installs ACPI as the idle handler for Linux and uses ACPI C2 and C3 processor states to save power on systems that - support it. It is required by several flavors of cpufreq + support it. + +config ACPI_PSS + bool "ACPI P States (PSS) driver" + depends on ACPI_PROCESSOR + depends on X86 || IA64 + select THERMAL + default y + help + This driver implements ACPI methods for controlling CPU performance + using PSS methods as described in the ACPI spec. It also enables support + for ACPI based performance throttling (TSS) and ACPI based thermal + monitoring. It is required by several flavors of cpufreq performance-state drivers. +config ACPI_PROCESSOR + tristate "Processor" + depends on X86 || IA64 + default y + help + This driver adds support for the ACPI Processor package. It is required + by several flavors of cpufreq performance-state, thermal, throttling and + idle drivers. + To compile this driver as a module, choose M here: the module will be called processor. diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 8a063e2..30b2bfc 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -82,9 +82,10 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o obj-$(CONFIG_ACPI_BGRT) += bgrt.o # processor has its own "processor." module_param namespace -processor-y := processor_driver.o processor_throttling.o -processor-y += processor_idle.o processor_thermal.o -processor-$(CONFIG_CPU_FREQ) += processor_perflib.o +processor-y := processor_driver.o +processor-$(CONFIG_ACPI_CST) += processor_idle.o +processor-$(CONFIG_ACPI_PSS) += processor_perflib.o \ + processor_throttling.o processor_thermal.o obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index d9f7158..64aa638 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -163,34 +163,24 @@ static struct notifier_block __refdata acpi_cpu_notifier = { .notifier_call = acpi_cpu_soft_notify, }; -static int __acpi_processor_start(struct acpi_device *device) +#ifdef CONFIG_ACPI_PSS +static int acpi_pss_perf_init(struct acpi_processor *pr, + struct acpi_device *device) { - struct acpi_processor *pr = acpi_driver_data(device); - acpi_status status; int result = 0; - if (!pr) - return -ENODEV; - - if (pr->flags.need_hotplug_init) - return 0; - -#ifdef CONFIG_CPU_FREQ acpi_processor_ppc_has_changed(pr, 0); -#endif + acpi_processor_get_throttling_info(pr); if (pr->flags.throttling) pr->flags.limit = 1; - if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver) - acpi_processor_power_init(pr); - pr->cdev = thermal_cooling_device_register("Processor", device, &processor_cooling_ops); if (IS_ERR(pr->cdev)) { result = PTR_ERR(pr->cdev); - goto err_power_exit; + return result; } dev_dbg(&device->dev, "registered as cooling_device%d\n", @@ -204,6 +194,7 @@ static int __acpi_processor_start(struct acpi_device *device) "Failed to create sysfs link 'thermal_cooling'\n"); goto err_thermal_unregister; } + result = sysfs_create_link(&pr->cdev->device.kobj, &device->dev.kobj, "device"); @@ -213,17 +204,61 @@ static int __acpi_processor_start(struct acpi_device *device) goto err_remove_sysfs_thermal; } - status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_processor_notify, device); - if (ACPI_SUCCESS(status)) - return 0; - sysfs_remove_link(&pr->cdev->device.kobj, "device"); err_remove_sysfs_thermal: sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); err_thermal_unregister: thermal_cooling_device_unregister(pr->cdev); - err_power_exit: + + return result; +} + +static void acpi_pss_perf_exit(struct acpi_processor *pr, + struct acpi_device *device) +{ + if (pr->cdev) { + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + thermal_cooling_device_unregister(pr->cdev); + pr->cdev = NULL; + } +} +#else +static inline int acpi_pss_perf_init(struct acpi_processor *pr, + struct acpi_device *device) +{ + return 0; +} + +static inline void acpi_pss_perf_exit(struct acpi_processor *pr, + struct acpi_device *device) {} +#endif /* CONFIG_ACPI_PSS */ + +static int __acpi_processor_start(struct acpi_device *device) +{ + struct acpi_processor *pr = acpi_driver_data(device); + acpi_status status; + int result = 0; + + if (!pr) + return -ENODEV; + + if (pr->flags.need_hotplug_init) + return 0; + + if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver) + acpi_processor_power_init(pr); + + result = acpi_pss_perf_init(pr, device); + if (result) + goto err_power_exit; + + status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify, device); + if (ACPI_SUCCESS(status)) + return 0; + +err_power_exit: acpi_processor_power_exit(pr); return result; } @@ -252,15 +287,10 @@ static int acpi_processor_stop(struct device *dev) pr = acpi_driver_data(device); if (!pr) return 0; - acpi_processor_power_exit(pr); - if (pr->cdev) { - sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); - sysfs_remove_link(&pr->cdev->device.kobj, "device"); - thermal_cooling_device_unregister(pr->cdev); - pr->cdev = NULL; - } + acpi_pss_perf_exit(pr, device); + return 0; } diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 659879a..2f36e2a 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -223,7 +223,7 @@ endif if IA64 config IA64_ACPI_CPUFREQ tristate "ACPI Processor P-States driver" - depends on ACPI_PROCESSOR + depends on ACPI_PROCESSOR && ACPI_PSS && ACPI_CST help This driver adds a CPUFreq driver which utilizes the ACPI Processor Performance States. diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index c59bdcb..ee285a8 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -18,6 +18,7 @@ config X86_INTEL_PSTATE config X86_PCC_CPUFREQ tristate "Processor Clocking Control interface driver" depends on ACPI && ACPI_PROCESSOR + depends on ACPI_PSS && ACPI_CST help This driver adds support for the PCC interface. @@ -32,6 +33,7 @@ config X86_PCC_CPUFREQ config X86_ACPI_CPUFREQ tristate "ACPI Processor P-States driver" depends on ACPI_PROCESSOR + depends on ACPI_PSS && ACPI_CST help This driver adds a CPUFreq driver which utilizes the ACPI Processor Performance States. diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 4188a4d..b76d05b 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -222,16 +222,6 @@ struct acpi_processor_errata { } piix4; }; -extern int acpi_processor_preregister_performance(struct - acpi_processor_performance - __percpu *performance); - -extern int acpi_processor_register_performance(struct acpi_processor_performance - *performance, unsigned int cpu); -extern void acpi_processor_unregister_performance(struct - acpi_processor_performance - *performance, - unsigned int cpu); /* note: this locks both the calling module and the processor module if a _PPC object exists, rmmod is disallowed then */ @@ -267,28 +257,52 @@ static inline int acpi_processor_ffh_cstate_probe(unsigned int cpu, return -1; } static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx - *cstate) -{ - return; -} + *cstate) {} #endif /* in processor_perflib.c */ -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_ACPI_PSS +extern int acpi_processor_preregister_performance(struct + acpi_processor_performance + __percpu *performance); + +extern int acpi_processor_register_performance(struct acpi_processor_performance + *performance, unsigned int cpu); +extern void acpi_processor_unregister_performance(struct + acpi_processor_performance + *performance, + unsigned int cpu); void acpi_processor_ppc_init(void); void acpi_processor_ppc_exit(void); int acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag); extern int acpi_processor_get_bios_limit(int cpu, unsigned int *limit); #else -static inline void acpi_processor_ppc_init(void) +static inline int acpi_processor_preregister_performance(struct + acpi_processor_performance + __percpu *performance) { - return; + return -ENODEV; + } -static inline void acpi_processor_ppc_exit(void) + +static inline int acpi_processor_register_performance(struct + acpi_processor_performance + *performance, unsigned int cpu) { - return; + return -ENODEV; + } + +static inline void acpi_processor_unregister_performance(struct + acpi_processor_performance + *performance, + unsigned int cpu) {} + +static inline void acpi_processor_ppc_init(void) {} + +static inline void acpi_processor_ppc_exit(void) {} + static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag) { @@ -302,12 +316,12 @@ static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr, } return 0; } + static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) { return -ENODEV; } - -#endif /* CONFIG_CPU_FREQ */ +#endif /* CONFIG_ACPI_PSS */ /* in processor_core.c */ phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id); @@ -318,6 +332,7 @@ int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id); void acpi_processor_set_pdc(acpi_handle handle); /* in processor_throttling.c */ +#ifdef CONFIG_ACPI_PSS int acpi_processor_tstate_has_changed(struct acpi_processor *pr); int acpi_processor_get_throttling_info(struct acpi_processor *pr); extern int acpi_processor_set_throttling(struct acpi_processor *pr, @@ -330,36 +345,71 @@ extern void acpi_processor_reevaluate_tstate(struct acpi_processor *pr, unsigned long action); extern const struct file_operations acpi_processor_throttling_fops; extern void acpi_processor_throttling_init(void); +#else +static inline int acpi_processor_tstate_has_changed(struct acpi_processor *pr) +{ + return 0; +} + +static inline int acpi_processor_get_throttling_info(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static inline int acpi_processor_set_throttling(struct acpi_processor *pr, + int state, bool force) +{ + return -ENODEV; +} + +static inline void acpi_processor_reevaluate_tstate(struct acpi_processor *pr, + unsigned long action) {} + +static inline void acpi_processor_throttling_init(void) {} +#endif /* CONFIG_ACPI_PSS */ + /* in processor_idle.c */ +extern struct cpuidle_driver acpi_idle_driver; +#ifdef CONFIG_ACPI_CST int acpi_processor_power_init(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr); int acpi_processor_cst_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); -extern struct cpuidle_driver acpi_idle_driver; - -#ifdef CONFIG_PM_SLEEP void acpi_processor_syscore_init(void); void acpi_processor_syscore_exit(void); #else +static inline int acpi_processor_power_init(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static inline int acpi_processor_power_exit(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static inline int acpi_processor_cst_has_changed(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static inline int acpi_processor_hotplug(struct acpi_processor *pr) +{ + return -ENODEV; +} static inline void acpi_processor_syscore_init(void) {} static inline void acpi_processor_syscore_exit(void) {} -#endif +#endif /* CONFIG_ACPI_CST */ /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); +#ifdef CONFIG_ACPI_PSS extern const struct thermal_cooling_device_ops processor_cooling_ops; -#ifdef CONFIG_CPU_FREQ void acpi_thermal_cpufreq_init(void); void acpi_thermal_cpufreq_exit(void); #else -static inline void acpi_thermal_cpufreq_init(void) -{ - return; -} -static inline void acpi_thermal_cpufreq_exit(void) -{ - return; -} -#endif +static inline void acpi_thermal_cpufreq_init(void) {} +static inline void acpi_thermal_cpufreq_exit(void) {} +#endif /* CONFIG_ACPI_PSS */ #endif