| Message ID | 1428572154-3548-9-git-send-email-peter.ujfalusi@ti.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
* Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 02:37]: > The sDMA requests are routed through the DMA crossbar and without the > crossbar only peripherals using DMA request 0-127 can be used. I assume this can be merged separately from the driver changes? Otherwise we'll have the same kind of "flag day" mess with the IRQ crossbar.. Regards, Tony > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > --- > arch/arm/boot/dts/dra7.dtsi | 57 ++++++++++++++++++++++++++------------------- > 1 file changed, 33 insertions(+), 24 deletions(-) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index 5332b57b4950..a2f4aa01984f 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -303,6 +303,15 @@ > dma-requests = <127>; > }; > > + sdma_xbar: dma-router@4a002b78 { > + compatible = "ti,dra7-dma-crossbar"; > + reg = <0x4a002b78 0xfc>; > + #dma-cells = <1>; > + dma-requests = <205>; > + ti,dma-safe-map = <0>; > + dma-masters = <&sdma>; > + }; > + > gpio1: gpio@4ae10000 { > compatible = "ti,omap4-gpio"; > reg = <0x4ae10000 0x200>; > @@ -398,7 +407,7 @@ > ti,hwmods = "uart1"; > clock-frequency = <48000000>; > status = "disabled"; > - dmas = <&sdma 49>, <&sdma 50>; > + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; > dma-names = "tx", "rx"; > }; > > @@ -409,7 +418,7 @@ > ti,hwmods = "uart2"; > clock-frequency = <48000000>; > status = "disabled"; > - dmas = <&sdma 51>, <&sdma 52>; > + dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; > dma-names = "tx", "rx"; > }; > > @@ -420,7 +429,7 @@ > ti,hwmods = "uart3"; > clock-frequency = <48000000>; > status = "disabled"; > - dmas = <&sdma 53>, <&sdma 54>; > + dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; > dma-names = "tx", "rx"; > }; > > @@ -431,7 +440,7 @@ > ti,hwmods = "uart4"; > clock-frequency = <48000000>; > status = "disabled"; > - dmas = <&sdma 55>, <&sdma 56>; > + dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; > dma-names = "tx", "rx"; > }; > > @@ -442,7 +451,7 @@ > ti,hwmods = "uart5"; > clock-frequency = <48000000>; > status = "disabled"; > - dmas = <&sdma 63>, <&sdma 64>; > + dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; > dma-names = "tx", "rx"; > }; > > @@ -453,7 +462,7 @@ > ti,hwmods = "uart6"; > clock-frequency = <48000000>; > status = "disabled"; > - dmas = <&sdma 79>, <&sdma 80>; > + dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; > dma-names = "tx", "rx"; > }; > > @@ -862,7 +871,7 @@ > ti,hwmods = "mmc1"; > ti,dual-volt; > ti,needs-special-reset; > - dmas = <&sdma 61>, <&sdma 62>; > + dmas = <&sdma_xbar 61>, <&sdma_xbar 62>; > dma-names = "tx", "rx"; > status = "disabled"; > pbias-supply = <&pbias_mmc_reg>; > @@ -874,7 +883,7 @@ > interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; > ti,hwmods = "mmc2"; > ti,needs-special-reset; > - dmas = <&sdma 47>, <&sdma 48>; > + dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; > dma-names = "tx", "rx"; > status = "disabled"; > }; > @@ -885,7 +894,7 @@ > interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; > ti,hwmods = "mmc3"; > ti,needs-special-reset; > - dmas = <&sdma 77>, <&sdma 78>; > + dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; > dma-names = "tx", "rx"; > status = "disabled"; > }; > @@ -896,7 +905,7 @@ > interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; > ti,hwmods = "mmc4"; > ti,needs-special-reset; > - dmas = <&sdma 57>, <&sdma 58>; > + dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; > dma-names = "tx", "rx"; > status = "disabled"; > }; > @@ -1041,14 +1050,14 @@ > #size-cells = <0>; > ti,hwmods = "mcspi1"; > ti,spi-num-cs = <4>; > - dmas = <&sdma 35>, > - <&sdma 36>, > - <&sdma 37>, > - <&sdma 38>, > - <&sdma 39>, > - <&sdma 40>, > - <&sdma 41>, > - <&sdma 42>; > + dmas = <&sdma_xbar 35>, > + <&sdma_xbar 36>, > + <&sdma_xbar 37>, > + <&sdma_xbar 38>, > + <&sdma_xbar 39>, > + <&sdma_xbar 40>, > + <&sdma_xbar 41>, > + <&sdma_xbar 42>; > dma-names = "tx0", "rx0", "tx1", "rx1", > "tx2", "rx2", "tx3", "rx3"; > status = "disabled"; > @@ -1062,10 +1071,10 @@ > #size-cells = <0>; > ti,hwmods = "mcspi2"; > ti,spi-num-cs = <2>; > - dmas = <&sdma 43>, > - <&sdma 44>, > - <&sdma 45>, > - <&sdma 46>; > + dmas = <&sdma_xbar 43>, > + <&sdma_xbar 44>, > + <&sdma_xbar 45>, > + <&sdma_xbar 46>; > dma-names = "tx0", "rx0", "tx1", "rx1"; > status = "disabled"; > }; > @@ -1078,7 +1087,7 @@ > #size-cells = <0>; > ti,hwmods = "mcspi3"; > ti,spi-num-cs = <2>; > - dmas = <&sdma 15>, <&sdma 16>; > + dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; > dma-names = "tx0", "rx0"; > status = "disabled"; > }; > @@ -1091,7 +1100,7 @@ > #size-cells = <0>; > ti,hwmods = "mcspi4"; > ti,spi-num-cs = <1>; > - dmas = <&sdma 70>, <&sdma 71>; > + dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; > dma-names = "tx0", "rx0"; > status = "disabled"; > }; > -- > 2.3.5 > -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/09/2015 06:18 PM, Tony Lindgren wrote: > * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 02:37]: >> The sDMA requests are routed through the DMA crossbar and without the >> crossbar only peripherals using DMA request 0-127 can be used. > > I assume this can be merged separately from the driver > changes? Unfortunately not. We need to have the drivers in place for the DTS changes to work. > > Otherwise we'll have the same kind of "flag day" mess with > the IRQ crossbar.. > > Regards, > > Tony >
* Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 11:55]: > On 04/09/2015 06:18 PM, Tony Lindgren wrote: > > * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 02:37]: > >> The sDMA requests are routed through the DMA crossbar and without the > >> crossbar only peripherals using DMA request 0-127 can be used. > > > > I assume this can be merged separately from the driver > > changes? > > Unfortunately not. We need to have the drivers in place for the DTS changes to > work. Right but just merging the driver changes presumably won't break things? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/09/2015 10:01 PM, Tony Lindgren wrote: > * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 11:55]: >> On 04/09/2015 06:18 PM, Tony Lindgren wrote: >>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 02:37]: >>>> The sDMA requests are routed through the DMA crossbar and without the >>>> crossbar only peripherals using DMA request 0-127 can be used. >>> >>> I assume this can be merged separately from the driver >>> changes? >> >> Unfortunately not. We need to have the drivers in place for the DTS changes to >> work. > > Right but just merging the driver changes presumably won't > break things? No, they will not break anything. We just do not have control over the DMA crossbar (in a same way as we don't have control right now).
* Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 12:07]: > On 04/09/2015 10:01 PM, Tony Lindgren wrote: > > * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 11:55]: > >> On 04/09/2015 06:18 PM, Tony Lindgren wrote: > >>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 02:37]: > >>>> The sDMA requests are routed through the DMA crossbar and without the > >>>> crossbar only peripherals using DMA request 0-127 can be used. > >>> > >>> I assume this can be merged separately from the driver > >>> changes? > >> > >> Unfortunately not. We need to have the drivers in place for the DTS changes to > >> work. > > > > Right but just merging the driver changes presumably won't > > break things? > > No, they will not break anything. We just do not have control over the DMA > crossbar (in a same way as we don't have control right now). OK good to hear. Thanks, Tony -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 09, 2015 at 12:35:54PM +0300, Peter Ujfalusi wrote: > The sDMA requests are routed through the DMA crossbar and without the > crossbar only peripherals using DMA request 0-127 can be used. > Need an ACK from ARM folks before I apply this and the DT ones too please
* Tony Lindgren <tony@atomide.com> [150409 12:17]: > * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 12:07]: > > On 04/09/2015 10:01 PM, Tony Lindgren wrote: > > > * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 11:55]: > > >> On 04/09/2015 06:18 PM, Tony Lindgren wrote: > > >>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [150409 02:37]: > > >>>> The sDMA requests are routed through the DMA crossbar and without the > > >>>> crossbar only peripherals using DMA request 0-127 can be used. > > >>> > > >>> I assume this can be merged separately from the driver > > >>> changes? > > >> > > >> Unfortunately not. We need to have the drivers in place for the DTS changes to > > >> work. > > > > > > Right but just merging the driver changes presumably won't > > > break things? > > > > No, they will not break anything. We just do not have control over the DMA > > crossbar (in a same way as we don't have control right now). > > OK good to hear. Looks like the related DMA changes are now merged, so applying this into omap-for-v4.3/dt thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5332b57b4950..a2f4aa01984f 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -303,6 +303,15 @@ dma-requests = <127>; }; + sdma_xbar: dma-router@4a002b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0x4a002b78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; + gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; @@ -398,7 +407,7 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 49>, <&sdma 50>; + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; dma-names = "tx", "rx"; }; @@ -409,7 +418,7 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 51>, <&sdma 52>; + dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; dma-names = "tx", "rx"; }; @@ -420,7 +429,7 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 53>, <&sdma 54>; + dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; dma-names = "tx", "rx"; }; @@ -431,7 +440,7 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 55>, <&sdma 56>; + dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; dma-names = "tx", "rx"; }; @@ -442,7 +451,7 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 63>, <&sdma 64>; + dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; dma-names = "tx", "rx"; }; @@ -453,7 +462,7 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 79>, <&sdma 80>; + dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; dma-names = "tx", "rx"; }; @@ -862,7 +871,7 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; + dmas = <&sdma_xbar 61>, <&sdma_xbar 62>; dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; @@ -874,7 +883,7 @@ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc2"; ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; + dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -885,7 +894,7 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc3"; ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; + dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -896,7 +905,7 @@ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc4"; ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; + dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -1041,14 +1050,14 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; + dmas = <&sdma_xbar 35>, + <&sdma_xbar 36>, + <&sdma_xbar 37>, + <&sdma_xbar 38>, + <&sdma_xbar 39>, + <&sdma_xbar 40>, + <&sdma_xbar 41>, + <&sdma_xbar 42>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; status = "disabled"; @@ -1062,10 +1071,10 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; + dmas = <&sdma_xbar 43>, + <&sdma_xbar 44>, + <&sdma_xbar 45>, + <&sdma_xbar 46>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -1078,7 +1087,7 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; + dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; dma-names = "tx0", "rx0"; status = "disabled"; }; @@ -1091,7 +1100,7 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; + dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; dma-names = "tx0", "rx0"; status = "disabled"; };
The sDMA requests are routed through the DMA crossbar and without the crossbar only peripherals using DMA request 0-127 can be used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/boot/dts/dra7.dtsi | 57 ++++++++++++++++++++++++++------------------- 1 file changed, 33 insertions(+), 24 deletions(-)