| Message ID | 1437663246-16049-2-git-send-email-vigneshr@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 23/07/15 17:54, Vignesh R wrote: > On am437x-gp-evm, pixcir touchscreen can wake the system from low power > state by generating wake-up interrupt via pinctrl and IO daisy chain. > Add support for optional wakeup interrupt source by regsitering to > automated wake IRQ framework introduced by commit 4990d4fe327b ("PM / > Wakeirq: Add automated device wake IRQ handling"). > This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add > support for optional wake-up") > > Signed-off-by: Vignesh R <vigneshr@ti.com> > --- > > v3: > * handle error code returned by of_irq_get_byname() > > v2: > * use of_irq_get_byname() > * remove enable/disable_wake_irq() > > drivers/input/touchscreen/pixcir_i2c_ts.c | 22 ++++++++++++++++++---- > include/linux/input/pixcir_ts.h | 1 + > 2 files changed, 19 insertions(+), 4 deletions(-) > > diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c > index 8f3e243a62bf..3a4ab358bf52 100644 > --- a/drivers/input/touchscreen/pixcir_i2c_ts.c > +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c > @@ -29,6 +29,8 @@ > #include <linux/of.h> > #include <linux/of_gpio.h> > #include <linux/of_device.h> > +#include <linux/of_irq.h> > +#include <linux/pm_wakeirq.h> > > #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ > > @@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev) > goto unlock; > } > } > - > - enable_irq_wake(client->irq); > } else if (input->users) { > ret = pixcir_stop(ts); > } > @@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev) > mutex_lock(&input->mutex); > > if (device_may_wakeup(&client->dev)) { > - disable_irq_wake(client->irq); > - > if (!input->users) { > ret = pixcir_stop(ts); > if (ret) { > @@ -445,6 +443,13 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) > dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, > pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); > > + pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); > + if (pdata->wakeirq < 0 && pdata->wakeirq != -ENODATA && > + pdata->wakeirq != -EINVAL) { > + dev_err(dev, "Failed to get wakeirq\n"); > + return ERR_PTR(pdata->wakeirq); > + } > + > return pdata; > } > #else > @@ -564,11 +569,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, > i2c_set_clientdata(client, tsdata); > device_init_wakeup(&client->dev, 1); > > + /* Register wakeirq */ > + error = (pdata->wakeirq > 0) ? > + dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) : > + dev_pm_set_wake_irq(dev, client->irq); Can 0 be a valid wakeirq or client->irq? If yes then this logic is broken. I would set wakeirq to -EINVAL or something if it is not available during probe and check for that condition. > + if (error) > + dev_info(dev, "unable to setup wakeirq %d\n", > + error); > + > return 0; > } > > static int pixcir_i2c_ts_remove(struct i2c_client *client) > { > + dev_pm_clear_wake_irq(&client->dev); > device_init_wakeup(&client->dev, 0); > > return 0; > diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h > index 7bae83b7c396..da573de5a5ee 100644 > --- a/include/linux/input/pixcir_ts.h > +++ b/include/linux/input/pixcir_ts.h > @@ -58,6 +58,7 @@ struct pixcir_ts_platform_data { > int x_max; > int y_max; > int gpio_attb; /* GPIO connected to ATTB line */ > + int wakeirq; > struct pixcir_i2c_chip_data chip; > }; > > cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/27/2015 04:19 PM, Roger Quadros wrote: > Hi, > > On 23/07/15 17:54, Vignesh R wrote: >> On am437x-gp-evm, pixcir touchscreen can wake the system from low power >> state by generating wake-up interrupt via pinctrl and IO daisy chain. >> Add support for optional wakeup interrupt source by regsitering to >> automated wake IRQ framework introduced by commit 4990d4fe327b ("PM / >> Wakeirq: Add automated device wake IRQ handling"). >> This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add >> support for optional wake-up") >> >> Signed-off-by: Vignesh R <vigneshr@ti.com> >> --- >> >> v3: >> * handle error code returned by of_irq_get_byname() >> >> v2: >> * use of_irq_get_byname() >> * remove enable/disable_wake_irq() >> >> drivers/input/touchscreen/pixcir_i2c_ts.c | 22 ++++++++++++++++++---- >> include/linux/input/pixcir_ts.h | 1 + >> 2 files changed, 19 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c >> index 8f3e243a62bf..3a4ab358bf52 100644 >> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c >> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c >> @@ -29,6 +29,8 @@ >> #include <linux/of.h> >> #include <linux/of_gpio.h> >> #include <linux/of_device.h> >> +#include <linux/of_irq.h> >> +#include <linux/pm_wakeirq.h> >> >> #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ >> >> @@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev) >> goto unlock; >> } >> } >> - >> - enable_irq_wake(client->irq); >> } else if (input->users) { >> ret = pixcir_stop(ts); >> } >> @@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev) >> mutex_lock(&input->mutex); >> >> if (device_may_wakeup(&client->dev)) { >> - disable_irq_wake(client->irq); >> - >> if (!input->users) { >> ret = pixcir_stop(ts); >> if (ret) { >> @@ -445,6 +443,13 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) >> dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, >> pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); >> >> + pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); >> + if (pdata->wakeirq < 0 && pdata->wakeirq != -ENODATA && >> + pdata->wakeirq != -EINVAL) { >> + dev_err(dev, "Failed to get wakeirq\n"); >> + return ERR_PTR(pdata->wakeirq); >> + } >> + >> return pdata; >> } >> #else >> @@ -564,11 +569,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, >> i2c_set_clientdata(client, tsdata); >> device_init_wakeup(&client->dev, 1); >> >> + /* Register wakeirq */ >> + error = (pdata->wakeirq > 0) ? >> + dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) : >> + dev_pm_set_wake_irq(dev, client->irq); > > Can 0 be a valid wakeirq or client->irq? > If yes then this logic is broken. > AFAIK, IRQ 0 is always assigned to system timer interrupt (cannot find reliable source to quote). > I would set wakeirq to -EINVAL or something if it is not available > during probe and check for that condition. > Not sure, if I understand you correctly pdata->wakeirq will have -ENODATA or -EINVAL(as returned by of_irq_get_byname()), if wakeirq is not available. Do you want me to check for these two conditions specifically rather than (pdata->wakeirq > 0) ?
On Mon, Jul 27, 2015 at 04:49:22PM +0530, Vignesh R wrote: > > > On 07/27/2015 04:19 PM, Roger Quadros wrote: > > Hi, > > > > On 23/07/15 17:54, Vignesh R wrote: > >> On am437x-gp-evm, pixcir touchscreen can wake the system from low power > >> state by generating wake-up interrupt via pinctrl and IO daisy chain. > >> Add support for optional wakeup interrupt source by regsitering to > >> automated wake IRQ framework introduced by commit 4990d4fe327b ("PM / > >> Wakeirq: Add automated device wake IRQ handling"). > >> This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add > >> support for optional wake-up") > >> > >> Signed-off-by: Vignesh R <vigneshr@ti.com> > >> --- > >> > >> v3: > >> * handle error code returned by of_irq_get_byname() > >> > >> v2: > >> * use of_irq_get_byname() > >> * remove enable/disable_wake_irq() > >> > >> drivers/input/touchscreen/pixcir_i2c_ts.c | 22 ++++++++++++++++++---- > >> include/linux/input/pixcir_ts.h | 1 + > >> 2 files changed, 19 insertions(+), 4 deletions(-) > >> > >> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c > >> index 8f3e243a62bf..3a4ab358bf52 100644 > >> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c > >> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c > >> @@ -29,6 +29,8 @@ > >> #include <linux/of.h> > >> #include <linux/of_gpio.h> > >> #include <linux/of_device.h> > >> +#include <linux/of_irq.h> > >> +#include <linux/pm_wakeirq.h> > >> > >> #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ > >> > >> @@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev) > >> goto unlock; > >> } > >> } > >> - > >> - enable_irq_wake(client->irq); > >> } else if (input->users) { > >> ret = pixcir_stop(ts); > >> } > >> @@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev) > >> mutex_lock(&input->mutex); > >> > >> if (device_may_wakeup(&client->dev)) { > >> - disable_irq_wake(client->irq); > >> - > >> if (!input->users) { > >> ret = pixcir_stop(ts); > >> if (ret) { > >> @@ -445,6 +443,13 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) > >> dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, > >> pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); > >> > >> + pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); > >> + if (pdata->wakeirq < 0 && pdata->wakeirq != -ENODATA && > >> + pdata->wakeirq != -EINVAL) { > >> + dev_err(dev, "Failed to get wakeirq\n"); > >> + return ERR_PTR(pdata->wakeirq); > >> + } > >> + > >> return pdata; > >> } > >> #else > >> @@ -564,11 +569,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, > >> i2c_set_clientdata(client, tsdata); > >> device_init_wakeup(&client->dev, 1); > >> > >> + /* Register wakeirq */ > >> + error = (pdata->wakeirq > 0) ? > >> + dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) : > >> + dev_pm_set_wake_irq(dev, client->irq); > > > > Can 0 be a valid wakeirq or client->irq? > > If yes then this logic is broken. > > > > AFAIK, IRQ 0 is always assigned to system timer interrupt (cannot find > reliable source to quote). > > > I would set wakeirq to -EINVAL or something if it is not available > > during probe and check for that condition. > > > > Not sure, if I understand you correctly > pdata->wakeirq will have -ENODATA or -EINVAL(as returned by > of_irq_get_byname()), if wakeirq is not available. Do you want me to > check for these two conditions specifically rather than > (pdata->wakeirq > 0) ? 0 is not really valid general IRQ number; I2C for example sets client->irq to 0 when there is no IRQ. BTW, what do you think about my patch pushing this into i2c core? Could you try and see if it works for you? Thanks.
On 28/07/15 00:20, Dmitry Torokhov wrote: > On Mon, Jul 27, 2015 at 04:49:22PM +0530, Vignesh R wrote: >> >> >> On 07/27/2015 04:19 PM, Roger Quadros wrote: >>> Hi, >>> >>> On 23/07/15 17:54, Vignesh R wrote: >>>> On am437x-gp-evm, pixcir touchscreen can wake the system from low power >>>> state by generating wake-up interrupt via pinctrl and IO daisy chain. >>>> Add support for optional wakeup interrupt source by regsitering to >>>> automated wake IRQ framework introduced by commit 4990d4fe327b ("PM / >>>> Wakeirq: Add automated device wake IRQ handling"). >>>> This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add >>>> support for optional wake-up") >>>> >>>> Signed-off-by: Vignesh R <vigneshr@ti.com> >>>> --- >>>> >>>> v3: >>>> * handle error code returned by of_irq_get_byname() >>>> >>>> v2: >>>> * use of_irq_get_byname() >>>> * remove enable/disable_wake_irq() >>>> >>>> drivers/input/touchscreen/pixcir_i2c_ts.c | 22 ++++++++++++++++++---- >>>> include/linux/input/pixcir_ts.h | 1 + >>>> 2 files changed, 19 insertions(+), 4 deletions(-) >>>> >>>> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c >>>> index 8f3e243a62bf..3a4ab358bf52 100644 >>>> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c >>>> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c >>>> @@ -29,6 +29,8 @@ >>>> #include <linux/of.h> >>>> #include <linux/of_gpio.h> >>>> #include <linux/of_device.h> >>>> +#include <linux/of_irq.h> >>>> +#include <linux/pm_wakeirq.h> >>>> >>>> #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ >>>> >>>> @@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev) >>>> goto unlock; >>>> } >>>> } >>>> - >>>> - enable_irq_wake(client->irq); >>>> } else if (input->users) { >>>> ret = pixcir_stop(ts); >>>> } >>>> @@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev) >>>> mutex_lock(&input->mutex); >>>> >>>> if (device_may_wakeup(&client->dev)) { >>>> - disable_irq_wake(client->irq); >>>> - >>>> if (!input->users) { >>>> ret = pixcir_stop(ts); >>>> if (ret) { >>>> @@ -445,6 +443,13 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) >>>> dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, >>>> pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); >>>> >>>> + pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); >>>> + if (pdata->wakeirq < 0 && pdata->wakeirq != -ENODATA && >>>> + pdata->wakeirq != -EINVAL) { >>>> + dev_err(dev, "Failed to get wakeirq\n"); >>>> + return ERR_PTR(pdata->wakeirq); >>>> + } >>>> + >>>> return pdata; >>>> } >>>> #else >>>> @@ -564,11 +569,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, >>>> i2c_set_clientdata(client, tsdata); >>>> device_init_wakeup(&client->dev, 1); >>>> >>>> + /* Register wakeirq */ >>>> + error = (pdata->wakeirq > 0) ? >>>> + dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) : >>>> + dev_pm_set_wake_irq(dev, client->irq); >>> >>> Can 0 be a valid wakeirq or client->irq? >>> If yes then this logic is broken. >>> >> >> AFAIK, IRQ 0 is always assigned to system timer interrupt (cannot find >> reliable source to quote). >> >>> I would set wakeirq to -EINVAL or something if it is not available >>> during probe and check for that condition. >>> >> >> Not sure, if I understand you correctly >> pdata->wakeirq will have -ENODATA or -EINVAL(as returned by >> of_irq_get_byname()), if wakeirq is not available. Do you want me to >> check for these two conditions specifically rather than >> (pdata->wakeirq > 0) ? > > 0 is not really valid general IRQ number; I2C for example sets > client->irq to 0 when there is no IRQ. OK. If we assume 0 is invalid IRQ, then the patch is fine. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 8f3e243a62bf..3a4ab358bf52 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -29,6 +29,8 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/pm_wakeirq.h> #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ @@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev) goto unlock; } } - - enable_irq_wake(client->irq); } else if (input->users) { ret = pixcir_stop(ts); } @@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev) mutex_lock(&input->mutex); if (device_may_wakeup(&client->dev)) { - disable_irq_wake(client->irq); - if (!input->users) { ret = pixcir_stop(ts); if (ret) { @@ -445,6 +443,13 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); + pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); + if (pdata->wakeirq < 0 && pdata->wakeirq != -ENODATA && + pdata->wakeirq != -EINVAL) { + dev_err(dev, "Failed to get wakeirq\n"); + return ERR_PTR(pdata->wakeirq); + } + return pdata; } #else @@ -564,11 +569,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, i2c_set_clientdata(client, tsdata); device_init_wakeup(&client->dev, 1); + /* Register wakeirq */ + error = (pdata->wakeirq > 0) ? + dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) : + dev_pm_set_wake_irq(dev, client->irq); + if (error) + dev_info(dev, "unable to setup wakeirq %d\n", + error); + return 0; } static int pixcir_i2c_ts_remove(struct i2c_client *client) { + dev_pm_clear_wake_irq(&client->dev); device_init_wakeup(&client->dev, 0); return 0; diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h index 7bae83b7c396..da573de5a5ee 100644 --- a/include/linux/input/pixcir_ts.h +++ b/include/linux/input/pixcir_ts.h @@ -58,6 +58,7 @@ struct pixcir_ts_platform_data { int x_max; int y_max; int gpio_attb; /* GPIO connected to ATTB line */ + int wakeirq; struct pixcir_i2c_chip_data chip; };
On am437x-gp-evm, pixcir touchscreen can wake the system from low power state by generating wake-up interrupt via pinctrl and IO daisy chain. Add support for optional wakeup interrupt source by regsitering to automated wake IRQ framework introduced by commit 4990d4fe327b ("PM / Wakeirq: Add automated device wake IRQ handling"). This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add support for optional wake-up") Signed-off-by: Vignesh R <vigneshr@ti.com> --- v3: * handle error code returned by of_irq_get_byname() v2: * use of_irq_get_byname() * remove enable/disable_wake_irq() drivers/input/touchscreen/pixcir_i2c_ts.c | 22 ++++++++++++++++++---- include/linux/input/pixcir_ts.h | 1 + 2 files changed, 19 insertions(+), 4 deletions(-)