diff mbox

[v6,5/9] clk: mediatek: Fix rate and dependency of MT8173 clocks

Message ID 1438676218-11310-6-git-send-email-jamesjj.liao@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

James Liao Aug. 4, 2015, 8:16 a.m. UTC
Remove the dependency from clk_null, and give all root clocks a
typical rate, include clkph_mck_o, usb_syspll_125m and hdmitx_dig_cts.

dpi_ck was removed due to no clock reference to it.

Replace parent clock of infra_cpum with cpum_ck, which is an external
clock and can be defined in the device tree.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
---
 drivers/clk/mediatek/clk-mt8173.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Sascha Hauer Aug. 5, 2015, 6:53 a.m. UTC | #1
On Tue, Aug 04, 2015 at 04:16:54PM +0800, James Liao wrote:
> Remove the dependency from clk_null, and give all root clocks a
> typical rate, include clkph_mck_o, usb_syspll_125m and hdmitx_dig_cts.
> 
> dpi_ck was removed due to no clock reference to it.
> 
> Replace parent clock of infra_cpum with cpum_ck, which is an external
> clock and can be defined in the device tree.
> 
> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
> ---
>  drivers/clk/mediatek/clk-mt8173.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
> index 361fe32..f37ace6 100644
> --- a/drivers/clk/mediatek/clk-mt8173.c
> +++ b/drivers/clk/mediatek/clk-mt8173.c
> @@ -22,10 +22,9 @@
>  
>  static DEFINE_SPINLOCK(mt8173_clk_lock);
>  
> -static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
> -	FACTOR(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
> -	FACTOR(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
> -	FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
> +static const struct mtk_fixed_clk fixed_clks[] __initconst = {
> +	FIXED_CLK(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk26m", 400 * MHZ),
> +	FIXED_CLK(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk26m", 125 * MHZ),

Hm, it seems you hide PLLs in fixed factor clock. Are you sure that
there is a PLL in the system generating 125MHz from 26MHz which is in no
way configurable? Or is this really some clock derived from the syspll
as the clock name suggests?

Sascha
James Liao Aug. 6, 2015, 8:35 a.m. UTC | #2
Hi Sascha,

On Wed, 2015-08-05 at 08:53 +0200, Sascha Hauer wrote:
> On Tue, Aug 04, 2015 at 04:16:54PM +0800, James Liao wrote:
> > -static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
> > -	FACTOR(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
> > -	FACTOR(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
> > -	FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
> > +static const struct mtk_fixed_clk fixed_clks[] __initconst = {
> > +	FIXED_CLK(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk26m", 400 * MHZ),
> > +	FIXED_CLK(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk26m", 125 * MHZ),
> 
> Hm, it seems you hide PLLs in fixed factor clock. Are you sure that
> there is a PLL in the system generating 125MHz from 26MHz which is in no
> way configurable? Or is this really some clock derived from the syspll
> as the clock name suggests?

According to the datasheet from our clock designer, usb_syspll_125m is
the output clock of an analog macro which is named SSUSB_PHY, and its
input clock is AD_CLK26M_CK.

SSUSB_PHY is not the same as general PLLs such as MAINPLL. So I don't
treat it as a configurable PLL but a fixed clock with the typical rate
125 MHz.


Best regards,

James
Sascha Hauer Aug. 6, 2015, 8:59 a.m. UTC | #3
On Thu, Aug 06, 2015 at 04:35:32PM +0800, James Liao wrote:
> Hi Sascha,
> 
> On Wed, 2015-08-05 at 08:53 +0200, Sascha Hauer wrote:
> > On Tue, Aug 04, 2015 at 04:16:54PM +0800, James Liao wrote:
> > > -static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
> > > -	FACTOR(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
> > > -	FACTOR(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
> > > -	FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
> > > +static const struct mtk_fixed_clk fixed_clks[] __initconst = {
> > > +	FIXED_CLK(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk26m", 400 * MHZ),
> > > +	FIXED_CLK(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk26m", 125 * MHZ),
> > 
> > Hm, it seems you hide PLLs in fixed factor clock. Are you sure that
> > there is a PLL in the system generating 125MHz from 26MHz which is in no
> > way configurable? Or is this really some clock derived from the syspll
> > as the clock name suggests?
> 
> According to the datasheet from our clock designer, usb_syspll_125m is
> the output clock of an analog macro which is named SSUSB_PHY, and its
> input clock is AD_CLK26M_CK.
> 
> SSUSB_PHY is not the same as general PLLs such as MAINPLL. So I don't
> treat it as a configurable PLL but a fixed clock with the typical rate
> 125 MHz.

Ok then.

Sascha
diff mbox

Patch

diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 361fe32..f37ace6 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -22,10 +22,9 @@ 
 
 static DEFINE_SPINLOCK(mt8173_clk_lock);
 
-static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
-	FACTOR(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
-	FACTOR(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
-	FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
+static const struct mtk_fixed_clk fixed_clks[] __initconst = {
+	FIXED_CLK(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk26m", 400 * MHZ),
+	FIXED_CLK(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk26m", 125 * MHZ),
 };
 
 static const struct mtk_fixed_factor top_divs[] __initconst = {
@@ -50,6 +49,7 @@  static const struct mtk_fixed_factor top_divs[] __initconst = {
 	FACTOR(CLK_TOP_CLKRTC_INT, "clkrtc_int", "clk26m", 1, 793),
 	FACTOR(CLK_TOP_FPC, "fpc_ck", "clk26m", 1, 1),
 
+	FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "tvdpll_445p5m", 1, 3),
 	FACTOR(CLK_TOP_HDMITXPLL_D2, "hdmitxpll_d2", "hdmitx_dig_cts", 1, 2),
 	FACTOR(CLK_TOP_HDMITXPLL_D3, "hdmitxpll_d3", "hdmitx_dig_cts", 1, 3),
 
@@ -608,7 +608,7 @@  static const struct mtk_gate infra_clks[] __initconst = {
 	GATE_ICG(CLK_INFRA_GCE, "infra_gce", "axi_sel", 6),
 	GATE_ICG(CLK_INFRA_L2C_SRAM, "infra_l2c_sram", "axi_sel", 7),
 	GATE_ICG(CLK_INFRA_M4U, "infra_m4u", "mem_sel", 8),
-	GATE_ICG(CLK_INFRA_CPUM, "infra_cpum", "clk_null", 15),
+	GATE_ICG(CLK_INFRA_CPUM, "infra_cpum", "cpum_ck", 15),
 	GATE_ICG(CLK_INFRA_KP, "infra_kp", "axi_sel", 16),
 	GATE_ICG(CLK_INFRA_CEC, "infra_cec", "clk26m", 18),
 	GATE_ICG(CLK_INFRA_PMICSPI, "infra_pmicspi", "pmicspi_sel", 22),
@@ -727,7 +727,7 @@  static void __init mtk_topckgen_init(struct device_node *node)
 
 	mt8173_top_clk_data = clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
 
-	mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
+	mtk_clk_register_fixed_clks(fixed_clks, ARRAY_SIZE(fixed_clks), clk_data);
 	mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
 	mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
 			&mt8173_clk_lock, clk_data);