| Message ID | 1438850055-30104-2-git-send-email-wenyou.yang@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 08/06/2015 01:34 AM, Wenyou Yang wrote: >>From SAMA5D4, the watchdog timer is upgrated with a new feature, Where does the additional ">" come from ? > which is describled as in the datasheet, "WDT_MR can be written > until a LOCKMR command is issued in WDT_CR". > That is to say, as long as the bootstrap and u-boot don't issue > a LOCKMR command, WDT_MR can be written more than once in the driver. > > So the SAMA5D4 watchdog driver's implementation is different from > the at91sam9260 watchdog driver implemented in file at91sam9_wdt.c. > The user application open the device file to enable the watchdog timer > hardware, and close to disable it, and set the watchdog timer timeout > by seting WDV and WDD fields of WDT_MR register, and ping the watchdog > by issuing WDRSTT command to WDT_CR register with hard-coded key. > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > --- > drivers/watchdog/Kconfig | 9 ++ > drivers/watchdog/Makefile | 1 + > drivers/watchdog/at91sam9_wdt.h | 2 + > drivers/watchdog/sama5d4_wdt.c | 280 +++++++++++++++++++++++++++++++++++++++ > 4 files changed, 292 insertions(+) > create mode 100644 drivers/watchdog/sama5d4_wdt.c > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index e5e7c55..47ad39a 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -167,6 +167,15 @@ config AT91SAM9X_WATCHDOG > Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will > reboot your system when the timeout is reached. > > +config SAMA5D4_WATCHDOG > + tristate "Atmel SAMA5D4 Watchdog Timer" > + depends on ARCH_AT91 > + select WATCHDOG_CORE > + help > + Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips. > + Its Watchdog Timer Mode Register can be written more than once. > + This will reboot your system when the timeout is reached. > + > config CADENCE_WATCHDOG > tristate "Cadence Watchdog Timer" > select WATCHDOG_CORE > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 5c19294..f24b820 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -41,6 +41,7 @@ obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o > obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o > obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o > obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o > +obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o > obj-$(CONFIG_DW_WATCHDOG) += dw_wdt.o > obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o > obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o > diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h > index c6fbb2e6..b79a83b 100644 > --- a/drivers/watchdog/at91sam9_wdt.h > +++ b/drivers/watchdog/at91sam9_wdt.h > @@ -22,11 +22,13 @@ > > #define AT91_WDT_MR 0x04 /* Watchdog Mode Register */ > #define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ > +#define AT91_WDT_SET_WDV(x) ((x) & AT91_WDT_WDV) > #define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ > #define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ > #define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ > #define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ > #define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ > +#define AT91_WDT_SET_WDD(x) (((x) << 16) & AT91_WDT_WDD) > #define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ > #define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ > > diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c > new file mode 100644 > index 0000000..a412215 > --- /dev/null > +++ b/drivers/watchdog/sama5d4_wdt.c > @@ -0,0 +1,280 @@ > +/* > + * Driver for Atmel SAMA5D4 Watchdog Timer > + * > + * Copyright (C) 2015 Atmel Corporation > + * > + * Licensed under GPLv2. > + */ > + > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_irq.h> > +#include <linux/platform_device.h> > +#include <linux/reboot.h> > +#include <linux/watchdog.h> > + > +#include "at91sam9_wdt.h" > + > +/* minimum and maximum watchdog timeout, in seconds */ > +#define MIN_WDT_TIMEOUT 1 > +#define MAX_WDT_TIMEOUT 16 > +#define WDT_DEFAULT_TIMEOUT MAX_WDT_TIMEOUT > + > +#define WDT_SEC2TICKS(s) ((s) ? (((s) << 8) - 1) : 0) > + > +struct sama5d4_wdt { > + struct watchdog_device wdd; > + void __iomem *reg_base; > + u32 config; > +}; > + > +static int wdt_timeout = WDT_DEFAULT_TIMEOUT; > +static bool nowayout = WATCHDOG_NOWAYOUT; > + > +module_param(wdt_timeout, int, 0); > +MODULE_PARM_DESC(wdt_timeout, > + "Watchdog timeout in seconds. (default = " > + __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")"); > + > +module_param(nowayout, bool, 0); > +MODULE_PARM_DESC(nowayout, > + "Watchdog cannot be stopped once started (default=" > + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > + > +#define wdt_read(wdt, field) \ > + readl_relaxed((wdt)->reg_base + (field)) > + > +#define wdt_write(wtd, field, val) \ > + writel_relaxed((val), (wdt)->reg_base + (field)) > + > +static int sama5d4_wdt_start(struct watchdog_device *wdd) > +{ > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > + u32 reg; > + > + reg = wdt_read(wdt, AT91_WDT_MR); > + reg &= ~AT91_WDT_WDDIS; > + wdt_write(wdt, AT91_WDT_MR, reg); > + > + return 0; > +} > + > +static int sama5d4_wdt_stop(struct watchdog_device *wdd) > +{ > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > + u32 reg; > + > + reg = wdt_read(wdt, AT91_WDT_MR); > + reg |= AT91_WDT_WDDIS; > + wdt_write(wdt, AT91_WDT_MR, reg); > + > + return 0; > +} > + > +static int sama5d4_wdt_ping(struct watchdog_device *wdd) > +{ > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > + > + wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); > + > + return 0; > +} > + > +static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd, > + unsigned int timeout) > +{ > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > + u32 value = WDT_SEC2TICKS(timeout); > + u32 reg; > + > + reg = wdt_read(wdt, AT91_WDT_MR); > + reg &= ~AT91_WDT_WDV; > + reg &= ~AT91_WDT_WDD; > + reg |= AT91_WDT_SET_WDV(value); > + reg |= AT91_WDT_SET_WDD(value); > + wdt_write(wdt, AT91_WDT_MR, reg); > + > + wdd->timeout = timeout; > + > + return 0; > +} > + > +static const struct watchdog_info sama5d4_wdt_info = { > + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, > + .identity = "Atmel SAMA5D4 Watchdog" > +}; > + > +static struct watchdog_ops sama5d4_wdt_ops = { > + .owner = THIS_MODULE, > + .start = sama5d4_wdt_start, > + .stop = sama5d4_wdt_stop, > + .ping = sama5d4_wdt_ping, > + .set_timeout = sama5d4_wdt_set_timeout You made another silent change in v4: You dropped the comma here, and above after .identity. Now, while it makes sense to have no comma after "{ }", it does make sense to have the comma here, because it avoids unnecessary conflicts and build errors later on if a member is added at the end of the list. Please add those commas back in. Also, please stop making silent changes like this. You are making it really hard to review your code - now I'll have to go through it line by line again and compare it with your earlier patches to see if you made any other unannounced changes. Thanks, Guenter
Hi Guenter, > -----Original Message----- > From: Guenter Roeck [mailto:linux@roeck-us.net] > Sent: 2015?8?6? 18:00 > To: Yang, Wenyou; wim@iguana.be; robh+dt@kernel.org; pawel.moll@arm.com; > mark.rutland@arm.com; ijc+devicetree@hellion.org.uk; galak@codeaurora.org > Cc: sylvain.rochet@finsecur.com; Ferre, Nicolas; boris.brezillon@free- > electrons.com; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > watchdog@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH v5 1/2] drivers: watchdog: add a driver to support SAMA5D4 > watchdog timer > > Hi, > > On 08/06/2015 01:34 AM, Wenyou Yang wrote: > >>From SAMA5D4, the watchdog timer is upgrated with a new feature, > > Where does the additional ">" come from ? I don't know why, but it isn't inclusive in my received mail. > > > which is describled as in the datasheet, "WDT_MR can be written until > > a LOCKMR command is issued in WDT_CR". > > That is to say, as long as the bootstrap and u-boot don't issue a > > LOCKMR command, WDT_MR can be written more than once in the driver. > > > > So the SAMA5D4 watchdog driver's implementation is different from the > > at91sam9260 watchdog driver implemented in file at91sam9_wdt.c. > > The user application open the device file to enable the watchdog timer > > hardware, and close to disable it, and set the watchdog timer timeout > > by seting WDV and WDD fields of WDT_MR register, and ping the watchdog > > by issuing WDRSTT command to WDT_CR register with hard-coded key. > > > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > > --- > > drivers/watchdog/Kconfig | 9 ++ > > drivers/watchdog/Makefile | 1 + > > drivers/watchdog/at91sam9_wdt.h | 2 + > > drivers/watchdog/sama5d4_wdt.c | 280 > +++++++++++++++++++++++++++++++++++++++ > > 4 files changed, 292 insertions(+) > > create mode 100644 drivers/watchdog/sama5d4_wdt.c > > > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index > > e5e7c55..47ad39a 100644 > > --- a/drivers/watchdog/Kconfig > > +++ b/drivers/watchdog/Kconfig > > @@ -167,6 +167,15 @@ config AT91SAM9X_WATCHDOG > > Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This > will > > reboot your system when the timeout is reached. > > > > +config SAMA5D4_WATCHDOG > > + tristate "Atmel SAMA5D4 Watchdog Timer" > > + depends on ARCH_AT91 > > + select WATCHDOG_CORE > > + help > > + Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips. > > + Its Watchdog Timer Mode Register can be written more than once. > > + This will reboot your system when the timeout is reached. > > + > > config CADENCE_WATCHDOG > > tristate "Cadence Watchdog Timer" > > select WATCHDOG_CORE > > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > > index 5c19294..f24b820 100644 > > --- a/drivers/watchdog/Makefile > > +++ b/drivers/watchdog/Makefile > > @@ -41,6 +41,7 @@ obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o > > obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o > > obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o > > obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o > > +obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o > > obj-$(CONFIG_DW_WATCHDOG) += dw_wdt.o > > obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o > > obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o diff --git > > a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h > > index c6fbb2e6..b79a83b 100644 > > --- a/drivers/watchdog/at91sam9_wdt.h > > +++ b/drivers/watchdog/at91sam9_wdt.h > > @@ -22,11 +22,13 @@ > > > > #define AT91_WDT_MR 0x04 /* Watchdog > Mode Register */ > > #define AT91_WDT_WDV (0xfff << 0) /* > Counter Value */ > > +#define AT91_WDT_SET_WDV(x) ((x) & > AT91_WDT_WDV) > > #define AT91_WDT_WDFIEN (1 << 12) /* > Fault Interrupt Enable */ > > #define AT91_WDT_WDRSTEN (1 << 13) /* > Reset Processor */ > > #define AT91_WDT_WDRPROC (1 << 14) /* > Timer Restart */ > > #define AT91_WDT_WDDIS (1 << 15) /* > Watchdog Disable */ > > #define AT91_WDT_WDD (0xfff << 16) /* > Delta Value */ > > +#define AT91_WDT_SET_WDD(x) (((x) << 16) & > AT91_WDT_WDD) > > #define AT91_WDT_WDDBGHLT (1 << 28) /* > Debug Halt */ > > #define AT91_WDT_WDIDLEHLT (1 << 29) /* > Idle Halt */ > > > > diff --git a/drivers/watchdog/sama5d4_wdt.c > > b/drivers/watchdog/sama5d4_wdt.c new file mode 100644 index > > 0000000..a412215 > > --- /dev/null > > +++ b/drivers/watchdog/sama5d4_wdt.c > > @@ -0,0 +1,280 @@ > > +/* > > + * Driver for Atmel SAMA5D4 Watchdog Timer > > + * > > + * Copyright (C) 2015 Atmel Corporation > > + * > > + * Licensed under GPLv2. > > + */ > > + > > +#include <linux/interrupt.h> > > +#include <linux/io.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_irq.h> > > +#include <linux/platform_device.h> > > +#include <linux/reboot.h> > > +#include <linux/watchdog.h> > > + > > +#include "at91sam9_wdt.h" > > + > > +/* minimum and maximum watchdog timeout, in seconds */ > > +#define MIN_WDT_TIMEOUT 1 > > +#define MAX_WDT_TIMEOUT 16 > > +#define WDT_DEFAULT_TIMEOUT MAX_WDT_TIMEOUT > > + > > +#define WDT_SEC2TICKS(s) ((s) ? (((s) << 8) - 1) : 0) > > + > > +struct sama5d4_wdt { > > + struct watchdog_device wdd; > > + void __iomem *reg_base; > > + u32 config; > > +}; > > + > > +static int wdt_timeout = WDT_DEFAULT_TIMEOUT; static bool nowayout = > > +WATCHDOG_NOWAYOUT; > > + > > +module_param(wdt_timeout, int, 0); > > +MODULE_PARM_DESC(wdt_timeout, > > + "Watchdog timeout in seconds. (default = " > > + __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")"); > > + > > +module_param(nowayout, bool, 0); > > +MODULE_PARM_DESC(nowayout, > > + "Watchdog cannot be stopped once started (default=" > > + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > > + > > +#define wdt_read(wdt, field) \ > > + readl_relaxed((wdt)->reg_base + (field)) > > + > > +#define wdt_write(wtd, field, val) \ > > + writel_relaxed((val), (wdt)->reg_base + (field)) > > + > > +static int sama5d4_wdt_start(struct watchdog_device *wdd) { > > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > > + u32 reg; > > + > > + reg = wdt_read(wdt, AT91_WDT_MR); > > + reg &= ~AT91_WDT_WDDIS; > > + wdt_write(wdt, AT91_WDT_MR, reg); > > + > > + return 0; > > +} > > + > > +static int sama5d4_wdt_stop(struct watchdog_device *wdd) { > > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > > + u32 reg; > > + > > + reg = wdt_read(wdt, AT91_WDT_MR); > > + reg |= AT91_WDT_WDDIS; > > + wdt_write(wdt, AT91_WDT_MR, reg); > > + > > + return 0; > > +} > > + > > +static int sama5d4_wdt_ping(struct watchdog_device *wdd) { > > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > > + > > + wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | > AT91_WDT_WDRSTT); > > + > > + return 0; > > +} > > + > > +static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd, > > + unsigned int timeout) > > +{ > > + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); > > + u32 value = WDT_SEC2TICKS(timeout); > > + u32 reg; > > + > > + reg = wdt_read(wdt, AT91_WDT_MR); > > + reg &= ~AT91_WDT_WDV; > > + reg &= ~AT91_WDT_WDD; > > + reg |= AT91_WDT_SET_WDV(value); > > + reg |= AT91_WDT_SET_WDD(value); > > + wdt_write(wdt, AT91_WDT_MR, reg); > > + > > + wdd->timeout = timeout; > > + > > + return 0; > > +} > > + > > +static const struct watchdog_info sama5d4_wdt_info = { > > + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | > WDIOF_KEEPALIVEPING, > > + .identity = "Atmel SAMA5D4 Watchdog" > > +}; > > + > > +static struct watchdog_ops sama5d4_wdt_ops = { > > + .owner = THIS_MODULE, > > + .start = sama5d4_wdt_start, > > + .stop = sama5d4_wdt_stop, > > + .ping = sama5d4_wdt_ping, > > + .set_timeout = sama5d4_wdt_set_timeout > > You made another silent change in v4: You dropped the comma here, and above > after .identity. Now, while it makes sense to have no comma after "{ }", it does > make sense to have the comma here, because it avoids unnecessary conflicts > and build errors later on if a member is added at the end of the list. Please add > those commas back in. I will add those commas back in. > > Also, please stop making silent changes like this. You are making it really hard to > review your code - now I'll have to go through it line by line again and compare it > with your earlier patches to see if you made any other unannounced changes. Sorry for silent changes. I will double check it more careful before submitting the patch. > > Thanks, > Guenter Best Regards, Wenyou Yang
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index e5e7c55..47ad39a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -167,6 +167,15 @@ config AT91SAM9X_WATCHDOG Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will reboot your system when the timeout is reached. +config SAMA5D4_WATCHDOG + tristate "Atmel SAMA5D4 Watchdog Timer" + depends on ARCH_AT91 + select WATCHDOG_CORE + help + Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips. + Its Watchdog Timer Mode Register can be written more than once. + This will reboot your system when the timeout is reached. + config CADENCE_WATCHDOG tristate "Cadence Watchdog Timer" select WATCHDOG_CORE diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 5c19294..f24b820 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o +obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o obj-$(CONFIG_DW_WATCHDOG) += dw_wdt.o obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h index c6fbb2e6..b79a83b 100644 --- a/drivers/watchdog/at91sam9_wdt.h +++ b/drivers/watchdog/at91sam9_wdt.h @@ -22,11 +22,13 @@ #define AT91_WDT_MR 0x04 /* Watchdog Mode Register */ #define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ +#define AT91_WDT_SET_WDV(x) ((x) & AT91_WDT_WDV) #define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ #define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ #define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ #define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ #define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ +#define AT91_WDT_SET_WDD(x) (((x) << 16) & AT91_WDT_WDD) #define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ #define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c new file mode 100644 index 0000000..a412215 --- /dev/null +++ b/drivers/watchdog/sama5d4_wdt.c @@ -0,0 +1,280 @@ +/* + * Driver for Atmel SAMA5D4 Watchdog Timer + * + * Copyright (C) 2015 Atmel Corporation + * + * Licensed under GPLv2. + */ + +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/watchdog.h> + +#include "at91sam9_wdt.h" + +/* minimum and maximum watchdog timeout, in seconds */ +#define MIN_WDT_TIMEOUT 1 +#define MAX_WDT_TIMEOUT 16 +#define WDT_DEFAULT_TIMEOUT MAX_WDT_TIMEOUT + +#define WDT_SEC2TICKS(s) ((s) ? (((s) << 8) - 1) : 0) + +struct sama5d4_wdt { + struct watchdog_device wdd; + void __iomem *reg_base; + u32 config; +}; + +static int wdt_timeout = WDT_DEFAULT_TIMEOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; + +module_param(wdt_timeout, int, 0); +MODULE_PARM_DESC(wdt_timeout, + "Watchdog timeout in seconds. (default = " + __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define wdt_read(wdt, field) \ + readl_relaxed((wdt)->reg_base + (field)) + +#define wdt_write(wtd, field, val) \ + writel_relaxed((val), (wdt)->reg_base + (field)) + +static int sama5d4_wdt_start(struct watchdog_device *wdd) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + u32 reg; + + reg = wdt_read(wdt, AT91_WDT_MR); + reg &= ~AT91_WDT_WDDIS; + wdt_write(wdt, AT91_WDT_MR, reg); + + return 0; +} + +static int sama5d4_wdt_stop(struct watchdog_device *wdd) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + u32 reg; + + reg = wdt_read(wdt, AT91_WDT_MR); + reg |= AT91_WDT_WDDIS; + wdt_write(wdt, AT91_WDT_MR, reg); + + return 0; +} + +static int sama5d4_wdt_ping(struct watchdog_device *wdd) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); + + return 0; +} + +static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + u32 value = WDT_SEC2TICKS(timeout); + u32 reg; + + reg = wdt_read(wdt, AT91_WDT_MR); + reg &= ~AT91_WDT_WDV; + reg &= ~AT91_WDT_WDD; + reg |= AT91_WDT_SET_WDV(value); + reg |= AT91_WDT_SET_WDD(value); + wdt_write(wdt, AT91_WDT_MR, reg); + + wdd->timeout = timeout; + + return 0; +} + +static const struct watchdog_info sama5d4_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "Atmel SAMA5D4 Watchdog" +}; + +static struct watchdog_ops sama5d4_wdt_ops = { + .owner = THIS_MODULE, + .start = sama5d4_wdt_start, + .stop = sama5d4_wdt_stop, + .ping = sama5d4_wdt_ping, + .set_timeout = sama5d4_wdt_set_timeout +}; + +static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id) +{ + struct sama5d4_wdt *wdt = platform_get_drvdata(dev_id); + + if (wdt_read(wdt, AT91_WDT_SR)) { + pr_crit("Atmel Watchdog Software Reset\n"); + emergency_restart(); + pr_crit("Reboot didn't succeed\n"); + } + + return IRQ_HANDLED; +} + +static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt) +{ + const char *tmp; + + wdt->config = AT91_WDT_WDDIS; + + if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) && + !strcmp(tmp, "software")) + wdt->config |= AT91_WDT_WDFIEN; + else + wdt->config |= AT91_WDT_WDRSTEN; + + if (of_property_read_bool(np, "atmel,idle-halt")) + wdt->config |= AT91_WDT_WDIDLEHLT; + + if (of_property_read_bool(np, "atmel,dbg-halt")) + wdt->config |= AT91_WDT_WDDBGHLT; + + return 0; +} + +static int sama5d4_wdt_init(struct sama5d4_wdt *wdt) +{ + struct watchdog_device *wdd = &wdt->wdd; + u32 value = WDT_SEC2TICKS(wdd->timeout); + u32 reg; + + /* + * Because the fields WDV and WDD must not be modified when the WDDIS + * bit is set, so clear the WDDIS bit before writing the WDT_MR. + */ + reg = wdt_read(wdt, AT91_WDT_MR); + reg &= ~AT91_WDT_WDDIS; + wdt_write(wdt, AT91_WDT_MR, reg); + + reg = wdt->config; + reg |= AT91_WDT_SET_WDD(value); + reg |= AT91_WDT_SET_WDV(value); + + wdt_write(wdt, AT91_WDT_MR, reg); + + return 0; +} + +static int sama5d4_wdt_probe(struct platform_device *pdev) +{ + struct watchdog_device *wdd; + struct sama5d4_wdt *wdt; + struct resource *res; + void __iomem *regs; + u32 irq = 0; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdd = &wdt->wdd; + wdd->timeout = wdt_timeout; + wdd->info = &sama5d4_wdt_info; + wdd->ops = &sama5d4_wdt_ops; + wdd->min_timeout = MIN_WDT_TIMEOUT; + wdd->max_timeout = MAX_WDT_TIMEOUT; + + watchdog_set_drvdata(wdd, wdt); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + wdt->reg_base = regs; + + if (pdev->dev.of_node) { + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (!irq) + dev_warn(&pdev->dev, "failed to get IRQ from DT\n"); + + ret = of_sama5d4_wdt_init(pdev->dev.of_node, wdt); + if (ret) + return ret; + } + + if ((wdt->config & AT91_WDT_WDFIEN) && irq) { + ret = devm_request_irq(&pdev->dev, irq, sama5d4_wdt_irq_handler, + IRQF_SHARED | IRQF_IRQPOLL | + IRQF_NO_SUSPEND, pdev->name, pdev); + if (ret) { + dev_err(&pdev->dev, + "cannot register interrupt handler\n"); + return ret; + } + } + + ret = watchdog_init_timeout(wdd, wdt_timeout, &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "unable to set timeout value\n"); + return ret; + } + + ret = sama5d4_wdt_init(wdt); + if (ret) + return ret; + + watchdog_set_nowayout(wdd, nowayout); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, "failed to register watchdog device\n"); + return ret; + } + + platform_set_drvdata(pdev, wdt); + + dev_info(&pdev->dev, "initialized (timeout = %d sec, nowayout = %d)\n", + wdt_timeout, nowayout); + + return 0; +} + +static int sama5d4_wdt_remove(struct platform_device *pdev) +{ + struct sama5d4_wdt *wdt = platform_get_drvdata(pdev); + + sama5d4_wdt_stop(&wdt->wdd); + + watchdog_unregister_device(&wdt->wdd); + + return 0; +} + +static const struct of_device_id sama5d4_wdt_of_match[] = { + { .compatible = "atmel,sama5d4-wdt", }, + { } +}; +MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match); + +static struct platform_driver sama5d4_wdt_driver = { + .probe = sama5d4_wdt_probe, + .remove = sama5d4_wdt_remove, + .driver = { + .name = "sama5d4_wdt", + .of_match_table = sama5d4_wdt_of_match, + } +}; +module_platform_driver(sama5d4_wdt_driver); + +MODULE_AUTHOR("Atmel Corporation"); +MODULE_DESCRIPTION("Atmel SAMA5D4 Watchdog Timer driver"); +MODULE_LICENSE("GPL v2");
From SAMA5D4, the watchdog timer is upgrated with a new feature, which is describled as in the datasheet, "WDT_MR can be written until a LOCKMR command is issued in WDT_CR". That is to say, as long as the bootstrap and u-boot don't issue a LOCKMR command, WDT_MR can be written more than once in the driver. So the SAMA5D4 watchdog driver's implementation is different from the at91sam9260 watchdog driver implemented in file at91sam9_wdt.c. The user application open the device file to enable the watchdog timer hardware, and close to disable it, and set the watchdog timer timeout by seting WDV and WDD fields of WDT_MR register, and ping the watchdog by issuing WDRSTT command to WDT_CR register with hard-coded key. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> --- drivers/watchdog/Kconfig | 9 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/at91sam9_wdt.h | 2 + drivers/watchdog/sama5d4_wdt.c | 280 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 292 insertions(+) create mode 100644 drivers/watchdog/sama5d4_wdt.c