| Message ID | 1439212864-12954-5-git-send-email-eric.auger@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, 2015-08-10 at 15:20 +0200, Eric Auger wrote: > This function makes possible to change the automasked mode. > > Signed-off-by: Eric Auger <eric.auger@linaro.org> > > --- > > v1 -> v2: > - set forwarded flag > --- > drivers/vfio/platform/vfio_platform_irq.c | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/drivers/vfio/platform/vfio_platform_irq.c b/drivers/vfio/platform/vfio_platform_irq.c > index b31b1f0..a285384 100644 > --- a/drivers/vfio/platform/vfio_platform_irq.c > +++ b/drivers/vfio/platform/vfio_platform_irq.c > @@ -186,6 +186,25 @@ static irqreturn_t vfio_handler(int irq, void *dev_id) > return ret; > } > > +static int vfio_platform_set_automasked(struct vfio_platform_irq *irq, > + bool automasked) > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&irq->lock, flags); > + if (automasked) { > + irq->forwarded = true; > + irq->flags |= VFIO_IRQ_INFO_AUTOMASKED; > + irq->handler = vfio_automasked_irq_handler; > + } else { > + irq->forwarded = false; > + irq->flags &= ~VFIO_IRQ_INFO_AUTOMASKED; > + irq->handler = vfio_irq_handler; > + } > + spin_unlock_irqrestore(&irq->lock, flags); > + return 0; In vfio-speak, automasked means level and we're not magically changing the IRQ from level to edge, we're simply able to handle level differently based on a hardware optimization. Should the user visible flags therefore change based on this? Aren't we really setting the forwarded state rather than the automasked state? > +} > + > static void vfio_platform_irq_bypass_stop(struct irq_bypass_producer *prod) > { > } -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/12/2015 08:56 PM, Alex Williamson wrote: > On Mon, 2015-08-10 at 15:20 +0200, Eric Auger wrote: >> This function makes possible to change the automasked mode. >> >> Signed-off-by: Eric Auger <eric.auger@linaro.org> >> >> --- >> >> v1 -> v2: >> - set forwarded flag >> --- >> drivers/vfio/platform/vfio_platform_irq.c | 19 +++++++++++++++++++ >> 1 file changed, 19 insertions(+) >> >> diff --git a/drivers/vfio/platform/vfio_platform_irq.c b/drivers/vfio/platform/vfio_platform_irq.c >> index b31b1f0..a285384 100644 >> --- a/drivers/vfio/platform/vfio_platform_irq.c >> +++ b/drivers/vfio/platform/vfio_platform_irq.c >> @@ -186,6 +186,25 @@ static irqreturn_t vfio_handler(int irq, void *dev_id) >> return ret; >> } >> >> +static int vfio_platform_set_automasked(struct vfio_platform_irq *irq, >> + bool automasked) >> +{ >> + unsigned long flags; >> + >> + spin_lock_irqsave(&irq->lock, flags); >> + if (automasked) { >> + irq->forwarded = true; >> + irq->flags |= VFIO_IRQ_INFO_AUTOMASKED; >> + irq->handler = vfio_automasked_irq_handler; >> + } else { >> + irq->forwarded = false; >> + irq->flags &= ~VFIO_IRQ_INFO_AUTOMASKED; >> + irq->handler = vfio_irq_handler; >> + } >> + spin_unlock_irqrestore(&irq->lock, flags); >> + return 0; > > In vfio-speak, automasked means level and we're not magically changing > the IRQ from level to edge, we're simply able to handle level > differently based on a hardware optimization. Should the user visible > flags therefore change based on this? Aren't we really setting the > forwarded state rather than the automasked state? Well actually this was following the discussion we had a long time ago about that topic: http://lkml.iu.edu/hypermail/linux/kernel/1409.1/03659.html I did not really know how to conclude ... If it is preferred I can hide this to the userspace, no problem. Eric > >> +} >> + >> static void vfio_platform_irq_bypass_stop(struct irq_bypass_producer *prod) >> { >> } > > > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2015-08-17 at 17:38 +0200, Eric Auger wrote: > On 08/12/2015 08:56 PM, Alex Williamson wrote: > > On Mon, 2015-08-10 at 15:20 +0200, Eric Auger wrote: > >> This function makes possible to change the automasked mode. > >> > >> Signed-off-by: Eric Auger <eric.auger@linaro.org> > >> > >> --- > >> > >> v1 -> v2: > >> - set forwarded flag > >> --- > >> drivers/vfio/platform/vfio_platform_irq.c | 19 +++++++++++++++++++ > >> 1 file changed, 19 insertions(+) > >> > >> diff --git a/drivers/vfio/platform/vfio_platform_irq.c b/drivers/vfio/platform/vfio_platform_irq.c > >> index b31b1f0..a285384 100644 > >> --- a/drivers/vfio/platform/vfio_platform_irq.c > >> +++ b/drivers/vfio/platform/vfio_platform_irq.c > >> @@ -186,6 +186,25 @@ static irqreturn_t vfio_handler(int irq, void *dev_id) > >> return ret; > >> } > >> > >> +static int vfio_platform_set_automasked(struct vfio_platform_irq *irq, > >> + bool automasked) > >> +{ > >> + unsigned long flags; > >> + > >> + spin_lock_irqsave(&irq->lock, flags); > >> + if (automasked) { > >> + irq->forwarded = true; > >> + irq->flags |= VFIO_IRQ_INFO_AUTOMASKED; > >> + irq->handler = vfio_automasked_irq_handler; > >> + } else { > >> + irq->forwarded = false; > >> + irq->flags &= ~VFIO_IRQ_INFO_AUTOMASKED; > >> + irq->handler = vfio_irq_handler; > >> + } > >> + spin_unlock_irqrestore(&irq->lock, flags); > >> + return 0; > > > > In vfio-speak, automasked means level and we're not magically changing > > the IRQ from level to edge, we're simply able to handle level > > differently based on a hardware optimization. Should the user visible > > flags therefore change based on this? Aren't we really setting the > > forwarded state rather than the automasked state? > > Well actually this was following the discussion we had a long time ago > about that topic: > > http://lkml.iu.edu/hypermail/linux/kernel/1409.1/03659.html > > I did not really know how to conclude ... > > If it is preferred I can hide this to the userspace, no problem. I think that was based on the user being involved in enabling forwarding though, now that it's hidden and automatic, it doesn't make much sense to me to toggle any of the interrupt info details based on the state of the forward. The user always needs to handle the interrupt as level since the bypass can be torn down at any point in time. We're taking advantage of the in-kernel path to make further optimizations, which seems like they should be transparent to the user. Thanks, Alex -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 18-Aug-15 19:44, Alex Williamson wrote: > On Mon, 2015-08-17 at 17:38 +0200, Eric Auger wrote: >> On 08/12/2015 08:56 PM, Alex Williamson wrote: >>> On Mon, 2015-08-10 at 15:20 +0200, Eric Auger wrote: >>>> This function makes possible to change the automasked mode. >>>> >>>> Signed-off-by: Eric Auger <eric.auger@linaro.org> >>>> >>>> --- >>>> >>>> v1 -> v2: >>>> - set forwarded flag >>>> --- >>>> drivers/vfio/platform/vfio_platform_irq.c | 19 +++++++++++++++++++ >>>> 1 file changed, 19 insertions(+) >>>> >>>> diff --git a/drivers/vfio/platform/vfio_platform_irq.c b/drivers/vfio/platform/vfio_platform_irq.c >>>> index b31b1f0..a285384 100644 >>>> --- a/drivers/vfio/platform/vfio_platform_irq.c >>>> +++ b/drivers/vfio/platform/vfio_platform_irq.c >>>> @@ -186,6 +186,25 @@ static irqreturn_t vfio_handler(int irq, void *dev_id) >>>> return ret; >>>> } >>>> >>>> +static int vfio_platform_set_automasked(struct vfio_platform_irq *irq, >>>> + bool automasked) >>>> +{ >>>> + unsigned long flags; >>>> + >>>> + spin_lock_irqsave(&irq->lock, flags); >>>> + if (automasked) { >>>> + irq->forwarded = true; >>>> + irq->flags |= VFIO_IRQ_INFO_AUTOMASKED; >>>> + irq->handler = vfio_automasked_irq_handler; >>>> + } else { >>>> + irq->forwarded = false; >>>> + irq->flags &= ~VFIO_IRQ_INFO_AUTOMASKED; >>>> + irq->handler = vfio_irq_handler; >>>> + } >>>> + spin_unlock_irqrestore(&irq->lock, flags); >>>> + return 0; >>> >>> In vfio-speak, automasked means level and we're not magically changing >>> the IRQ from level to edge, we're simply able to handle level >>> differently based on a hardware optimization. Should the user visible >>> flags therefore change based on this? Aren't we really setting the >>> forwarded state rather than the automasked state? >> >> Well actually this was following the discussion we had a long time ago >> about that topic: >> >> http://lkml.iu.edu/hypermail/linux/kernel/1409.1/03659.html >> >> I did not really know how to conclude ... >> >> If it is preferred I can hide this to the userspace, no problem. > > I think that was based on the user being involved in enabling forwarding > though, now that it's hidden and automatic, it doesn't make much sense > to me to toggle any of the interrupt info details based on the state of > the forward. The user always needs to handle the interrupt as level > since the bypass can be torn down at any point in time. We're taking > advantage of the in-kernel path to make further optimizations, which > seems like they should be transparent to the user. Thanks, I wonder if it makes sense to rename VFIO_IRQ_INFO_AUTOMASKED to VFIO_IRQ_INFO_LEVEL_TRIGGERED, and reintroduce VFIO_IRQ_INFO_AUTOMASKED as an alias, so compatibility with user space can be maintained? This way this semantic misunderstanding could be left behind. Cheers, Antonios > > Alex > > _______________________________________________ > kvmarm mailing list > kvmarm@lists.cs.columbia.edu > https://lists.cs.columbia.edu/mailman/listinfo/kvmarm >
On Mon, 2015-08-31 at 13:43 +0200, Antonios Motakis wrote: > > On 18-Aug-15 19:44, Alex Williamson wrote: > > On Mon, 2015-08-17 at 17:38 +0200, Eric Auger wrote: > >> On 08/12/2015 08:56 PM, Alex Williamson wrote: > >>> On Mon, 2015-08-10 at 15:20 +0200, Eric Auger wrote: > >>>> This function makes possible to change the automasked mode. > >>>> > >>>> Signed-off-by: Eric Auger <eric.auger@linaro.org> > >>>> > >>>> --- > >>>> > >>>> v1 -> v2: > >>>> - set forwarded flag > >>>> --- > >>>> drivers/vfio/platform/vfio_platform_irq.c | 19 +++++++++++++++++++ > >>>> 1 file changed, 19 insertions(+) > >>>> > >>>> diff --git a/drivers/vfio/platform/vfio_platform_irq.c b/drivers/vfio/platform/vfio_platform_irq.c > >>>> index b31b1f0..a285384 100644 > >>>> --- a/drivers/vfio/platform/vfio_platform_irq.c > >>>> +++ b/drivers/vfio/platform/vfio_platform_irq.c > >>>> @@ -186,6 +186,25 @@ static irqreturn_t vfio_handler(int irq, void *dev_id) > >>>> return ret; > >>>> } > >>>> > >>>> +static int vfio_platform_set_automasked(struct vfio_platform_irq *irq, > >>>> + bool automasked) > >>>> +{ > >>>> + unsigned long flags; > >>>> + > >>>> + spin_lock_irqsave(&irq->lock, flags); > >>>> + if (automasked) { > >>>> + irq->forwarded = true; > >>>> + irq->flags |= VFIO_IRQ_INFO_AUTOMASKED; > >>>> + irq->handler = vfio_automasked_irq_handler; > >>>> + } else { > >>>> + irq->forwarded = false; > >>>> + irq->flags &= ~VFIO_IRQ_INFO_AUTOMASKED; > >>>> + irq->handler = vfio_irq_handler; > >>>> + } > >>>> + spin_unlock_irqrestore(&irq->lock, flags); > >>>> + return 0; > >>> > >>> In vfio-speak, automasked means level and we're not magically changing > >>> the IRQ from level to edge, we're simply able to handle level > >>> differently based on a hardware optimization. Should the user visible > >>> flags therefore change based on this? Aren't we really setting the > >>> forwarded state rather than the automasked state? > >> > >> Well actually this was following the discussion we had a long time ago > >> about that topic: > >> > >> http://lkml.iu.edu/hypermail/linux/kernel/1409.1/03659.html > >> > >> I did not really know how to conclude ... > >> > >> If it is preferred I can hide this to the userspace, no problem. > > > > I think that was based on the user being involved in enabling forwarding > > though, now that it's hidden and automatic, it doesn't make much sense > > to me to toggle any of the interrupt info details based on the state of > > the forward. The user always needs to handle the interrupt as level > > since the bypass can be torn down at any point in time. We're taking > > advantage of the in-kernel path to make further optimizations, which > > seems like they should be transparent to the user. Thanks, > > I wonder if it makes sense to rename VFIO_IRQ_INFO_AUTOMASKED to > VFIO_IRQ_INFO_LEVEL_TRIGGERED, and reintroduce VFIO_IRQ_INFO_AUTOMASKED as > an alias, so compatibility with user space can be maintained? This way > this semantic misunderstanding could be left behind. Is there really a misunderstanding here? I think the change is that the user was previously involved and updating the flag reinforced that. Now the user is not involved and the flag changing is just unexpected noise. "automasked" is intentionally not "level" because being level triggered may not be the only reason we'd need to mask an interrupt upon receiving it. We could actually have automasked edge triggered interrupts if we wanted. We don't do that, so we can equate automasked to level currently, but technically automasked simply indicates that an unmask is required to get the next interrupt. In this case the VM is able to effectively do the unmask itself. Thanks, Alex -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/vfio/platform/vfio_platform_irq.c b/drivers/vfio/platform/vfio_platform_irq.c index b31b1f0..a285384 100644 --- a/drivers/vfio/platform/vfio_platform_irq.c +++ b/drivers/vfio/platform/vfio_platform_irq.c @@ -186,6 +186,25 @@ static irqreturn_t vfio_handler(int irq, void *dev_id) return ret; } +static int vfio_platform_set_automasked(struct vfio_platform_irq *irq, + bool automasked) +{ + unsigned long flags; + + spin_lock_irqsave(&irq->lock, flags); + if (automasked) { + irq->forwarded = true; + irq->flags |= VFIO_IRQ_INFO_AUTOMASKED; + irq->handler = vfio_automasked_irq_handler; + } else { + irq->forwarded = false; + irq->flags &= ~VFIO_IRQ_INFO_AUTOMASKED; + irq->handler = vfio_irq_handler; + } + spin_unlock_irqrestore(&irq->lock, flags); + return 0; +} + static void vfio_platform_irq_bypass_stop(struct irq_bypass_producer *prod) { }
This function makes possible to change the automasked mode. Signed-off-by: Eric Auger <eric.auger@linaro.org> --- v1 -> v2: - set forwarded flag --- drivers/vfio/platform/vfio_platform_irq.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)