diff mbox

[v4,4/4] Use 2GB memory block size on large-memory x86-64 systems

Message ID 1415089784-28779-4-git-send-email-daniel@numascale.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Daniel J Blueman Nov. 4, 2014, 8:29 a.m. UTC
On large-memory x86-64 systems of 64GB or more with memory hot-plug
enabled, use a 2GB memory block size. Eg with 64GB memory, this reduces
the number of directories in /sys/devices/system/memory from 512 to 32,
making it more manageable, and reducing the creation time accordingly.

This caveat is that the memory can't be offlined (for hotplug or otherwise)
with finer 128MB granularity, but this is unimportant due to the high
memory densities generally used with such large-memory systems, where
eg a single DIMM is the order of 16GB. 

Signed-off-by: Daniel J Blueman <daniel@numascale.com>
---
 init_64.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Luck, Tony Aug. 21, 2015, 6:19 p.m. UTC | #1
On Tue, Nov 04, 2014 at 04:29:44PM +0800, Daniel J Blueman wrote:
> On large-memory x86-64 systems of 64GB or more with memory hot-plug
> enabled, use a 2GB memory block size. Eg with 64GB memory, this reduces
> the number of directories in /sys/devices/system/memory from 512 to 32,
> making it more manageable, and reducing the creation time accordingly.
> 
> This caveat is that the memory can't be offlined (for hotplug or otherwise)
> with finer 128MB granularity, but this is unimportant due to the high
> memory densities generally used with such large-memory systems, where
> eg a single DIMM is the order of 16GB. 

git bisect points to this commit as the cause of a panic on my
machine:

[    4.518415] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    4.525882] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[    4.536280] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[    4.544344] PCI: Using configuration type 1 for base access
[    4.550778] BUG: unable to handle kernel paging request at ffffea0078000020
[    4.558572] IP: [<ffffffff8142ab0d>] register_mem_sect_under_node+0x6d/0xe0
[    4.566366] PGD 1dfffcc067 PUD 1dfffca067 PMD 0
[    4.571554] Oops: 0000 [#1] SMP
[    4.575181] Modules linked in:
[    4.578604] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #17
[    4.585800] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRBDXSD1.86B.0326.D03.1508171454 08/17/2015
[    4.597347] task: ffff883b84960000 ti: ffff881d7ea14000 task.ti: ffff881d7ea14000
[    4.605705] RIP: 0010:[<ffffffff8142ab0d>]  [<ffffffff8142ab0d>] register_mem_sect_under_node+0x6d/0xe0
[    4.616205] RSP: 0000:ffff881d7ea17d68  EFLAGS: 00010206
[    4.622135] RAX: ffffea0078000020 RBX: 0000000000000001 RCX: 0000000001e00000
[    4.630102] RDX: 0000000078000000 RSI: 0000000000000001 RDI: ffff881d7ccb6400
[    4.638069] RBP: ffff881d7ea17d78 R08: 0000000001e7ffff R09: 0000000003c00000
[    4.646035] R10: ffffffff813043a0 R11: ffffea0169efa600 R12: 0000000000000001
[    4.654003] R13: 0000000000000001 R14: ffff881d7ccb6400 R15: 0000000000000000
[    4.661972] FS:  0000000000000000(0000) GS:ffff881d8b400000(0000) knlGS:0000000000000000
[    4.670996] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.677411] CR2: ffffea0078000020 CR3: 00000000019a0000 CR4: 00000000003407f0
[    4.685381] Stack:
[    4.687627]  0000000001e70000 0000000000000001 ffff881d7ea17dc8 ffffffff8142af0a
[    4.695926]  ffff881d7ea17de8 0000000003c00000 ffff881d00000018 0000000000000002
[    4.704225]  0000000000000400 0000000000000000 ffffffff81b101c5 0000000000000000
[    4.712524] Call Trace:
[    4.715261]  [<ffffffff8142af0a>] register_one_node+0x18a/0x2b0
[    4.721871]  [<ffffffff81b101c5>] ? pci_iommu_alloc+0x6e/0x6e
[    4.728287]  [<ffffffff81b10201>] topology_init+0x3c/0x95
[    4.734321]  [<ffffffff81002144>] do_one_initcall+0xd4/0x210
[    4.740645]  [<ffffffff8109b515>] ? parse_args+0x245/0x480
[    4.746774]  [<ffffffff810bddc8>] ? __wake_up+0x48/0x60
[    4.752611]  [<ffffffff81b062f9>] kernel_init_freeable+0x19d/0x23c
[    4.759511]  [<ffffffff81b059e3>] ? initcall_blacklist+0xb6/0xb6
[    4.766226]  [<ffffffff816580d0>] ? rest_init+0x80/0x80
[    4.772059]  [<ffffffff816580de>] kernel_init+0xe/0xf0
[    4.777803]  [<ffffffff8167057c>] ret_from_fork+0x7c/0xb0
[    4.783831]  [<ffffffff816580d0>] ? rest_init+0x80/0x80
[    4.789655] Code: 39 c1 77 59 48 c1 e2 15 48 b8 00 00 00 00 00 ea ff ff 48 8d 44 02 20 eb 12 0f 1f 44 00 00 48 83 c1 01 48 83 c0 40 49 39 c8 72 5b <48> 83 38 00 74 ed 48 8b 50 e0 48 c1 ea 36 39 d6 75 e1 48 8b 04
[    4.811356] RIP  [<ffffffff8142ab0d>] register_mem_sect_under_node+0x6d/0xe0
[    4.819238]  RSP <ffff881d7ea17d68>
[    4.823132] CR2: ffffea0078000020
[    4.826836] ---[ end trace 10b7bb944b11529f ]---
[    4.831989] Kernel panic - not syncing: Fatal exception
[    4.837866] ---[ end Kernel panic - not syncing: Fatal exception

reverting the commit indeed makes the problem go away.

Now the root problem for me is that I have an insane BIOS
that handed me an e820 table that is full of holes (for entries
above 4GB) ... and ends with an entry that is only 256M aligned:


[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005cc0afff] usable
[    0.000000] BIOS-e820: [mem 0x000000005cc0b000-0x000000005e108fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e109000-0x000000006035cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006035d000-0x00000000604fcfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000604fd000-0x000000007bafffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bb00000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000118fffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000001200000000-0x0000001dffffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000001e70000000-0x0000001f3fffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000002000000000-0x0000002cffffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000002da0000000-0x0000002e6fffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000002f00000000-0x0000003bffffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000003cd0000000-0x0000003d9fffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000003e00000000-0x0000004ccfffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000004d00000000-0x0000005affffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000005b30000000-0x0000005bffffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000005c00000000-0x00000069ffffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000006a60000000-0x0000006b2fffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000006c00000000-0x000000798fffffff] usable

so the older code will look at max_pfn and set memory block size:

[    3.021752] memory block size : 256MB

I think the problem is more connected to the strange max_pfn rather
than the holes ... but will defer to wiser heads.

If the problem is with max_pfn ... I don't think it is a safe assumption
that systems with >64GB memory will have 2GB aligned max_pfn.

-Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index df1a992..9622ab2 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -52,7 +52,6 @@ 
 #include <asm/numa.h>
 #include <asm/cacheflush.h>
 #include <asm/init.h>
-#include <asm/uv/uv.h>
 #include <asm/setup.h>
 
 #include "mm_internal.h"
@@ -1234,12 +1233,10 @@  static unsigned long probe_memory_block_size(void)
 	/* start from 2g */
 	unsigned long bz = 1UL<<31;
 
-#ifdef CONFIG_X86_UV
-	if (is_uv_system()) {
-		printk(KERN_INFO "UV: memory block size 2GB\n");
+	if (totalram_pages >= (64ULL << (30 - PAGE_SHIFT))) {
+		pr_info("Using 2GB memory block size for large-memory system\n");
 		return 2UL * 1024 * 1024 * 1024;
 	}
-#endif
 
 	/* less than 64g installed */
 	if ((max_pfn << PAGE_SHIFT) < (16UL << 32))