diff mbox

pci: acpi: Generic function for setting up PCI device DMA coherency

Message ID 1439459925-2361-1-git-send-email-Suravee.Suthikulpanit@amd.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Suravee Suthikulpanit Aug. 13, 2015, 9:58 a.m. UTC
This patch refactors of_pci_dma_configure() into a more generic
pci_dma_configure(), which can be reused by non-OF code.
Then, it adds support for setting up PCI device DMA coherency from
ACPI _CCA object that should normally be specified in the DSDT node
of its PCI host bridge..

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Rafael J. Wysocki <rjw@rjwysocki.net>
CC: Rob Herring <robh+dt@kernel.org>
CC: Murali Karicheri <m-karicheri2@ti.com>
---
Note: According to the ACPI spec, the _CCA attribute is required
      for ARM64. Therefore, this patch is a pre-req for ACPI PCI
      support for ARM64 which is currently in development.

      Also, this should not affect other architectures since
      if CCA is not required, the default value is coherent.
      Please see include/acpi/acpi_bus.h: acpi_check_dma() and
      drivers/acpi/scan.c: acpi_init_coherency() for more information

 drivers/of/of_pci.c    | 20 --------------------
 drivers/pci/probe.c    | 35 +++++++++++++++++++++++++++++++++--
 include/linux/of_pci.h |  3 ---
 3 files changed, 33 insertions(+), 25 deletions(-)

Comments

Suravee Suthikulpanit Aug. 24, 2015, 4:41 p.m. UTC | #1
Hi,

Ping. Does anyone have any comments or suggestions?

Thanks,
Suravee

On 8/13/15 16:58, Suravee Suthikulpanit wrote:
> This patch refactors of_pci_dma_configure() into a more generic
> pci_dma_configure(), which can be reused by non-OF code.
> Then, it adds support for setting up PCI device DMA coherency from
> ACPI _CCA object that should normally be specified in the DSDT node
> of its PCI host bridge..
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> CC: Bjorn Helgaas <bhelgaas@google.com>
> CC: Catalin Marinas <catalin.marinas@arm.com>
> CC: Will Deacon <will.deacon@arm.com>
> CC: Rafael J. Wysocki <rjw@rjwysocki.net>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: Murali Karicheri <m-karicheri2@ti.com>
> ---
> Note: According to the ACPI spec, the _CCA attribute is required
>        for ARM64. Therefore, this patch is a pre-req for ACPI PCI
>        support for ARM64 which is currently in development.
>
>        Also, this should not affect other architectures since
>        if CCA is not required, the default value is coherent.
>        Please see include/acpi/acpi_bus.h: acpi_check_dma() and
>        drivers/acpi/scan.c: acpi_init_coherency() for more information
>
>   drivers/of/of_pci.c    | 20 --------------------
>   drivers/pci/probe.c    | 35 +++++++++++++++++++++++++++++++++--
>   include/linux/of_pci.h |  3 ---
>   3 files changed, 33 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 5751dc5..b66ee4e 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -117,26 +117,6 @@ int of_get_pci_domain_nr(struct device_node *node)
>   }
>   EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>
> -/**
> - * of_pci_dma_configure - Setup DMA configuration
> - * @dev: ptr to pci_dev struct of the PCI device
> - *
> - * Function to update PCI devices's DMA configuration using the same
> - * info from the OF node of host bridge's parent (if any).
> - */
> -void of_pci_dma_configure(struct pci_dev *pci_dev)
> -{
> -	struct device *dev = &pci_dev->dev;
> -	struct device *bridge = pci_get_host_bridge_device(pci_dev);
> -
> -	if (!bridge->parent)
> -		return;
> -
> -	of_dma_configure(dev, bridge->parent->of_node);
> -	pci_put_host_bridge_device(bridge);
> -}
> -EXPORT_SYMBOL_GPL(of_pci_dma_configure);
> -
>   #if defined(CONFIG_OF_ADDRESS)
>   /**
>    * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index cefd636..e2fcd3b 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -6,12 +6,14 @@
>   #include <linux/delay.h>
>   #include <linux/init.h>
>   #include <linux/pci.h>
> -#include <linux/of_pci.h>
> +#include <linux/of_device.h>
>   #include <linux/pci_hotplug.h>
>   #include <linux/slab.h>
>   #include <linux/module.h>
>   #include <linux/cpumask.h>
>   #include <linux/pci-aspm.h>
> +#include <linux/acpi.h>
> +#include <linux/property.h>
>   #include <asm-generic/pci-bridge.h>
>   #include "pci.h"
>
> @@ -1544,6 +1546,35 @@ static void pci_init_capabilities(struct pci_dev *dev)
>   	pci_enable_acs(dev);
>   }
>
> +/**
> + * pci_dma_configure - Setup DMA configuration
> + * @pci_dev: ptr to pci_dev struct of the PCI device
> + *
> + * Function to update PCI devices's DMA configuration using the same
> + * info from the OF node or ACPI node of host bridge's parent (if any).
> + */
> +static void pci_dma_configure(struct pci_dev *pci_dev)
> +{
> +	struct device *dev = &pci_dev->dev;
> +	struct device *bridge = pci_get_host_bridge_device(pci_dev);
> +	struct acpi_device *adev;
> +	bool coherent;
> +
> +	if (has_acpi_companion(bridge)) {
> +		adev = to_acpi_node(bridge->fwnode);
> +		if (acpi_check_dma(adev, &coherent))
> +			arch_setup_dma_ops(dev, 0, 0, NULL, coherent);
> +	} else {
> +		struct device *host = bridge->parent;
> +		if (!host)
> +			return;
> +
> +		of_dma_configure(dev, host->of_node);
> +	}
> +
> +	pci_put_host_bridge_device(bridge);
> +}
> +
>   void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
>   {
>   	int ret;
> @@ -1557,7 +1588,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
>   	dev->dev.dma_mask = &dev->dma_mask;
>   	dev->dev.dma_parms = &dev->dma_parms;
>   	dev->dev.coherent_dma_mask = 0xffffffffull;
> -	of_pci_dma_configure(dev);
> +	pci_dma_configure(dev);
>
>   	pci_set_dma_max_seg_size(dev, 65536);
>   	pci_set_dma_seg_boundary(dev, 0xffffffff);
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> index 29fd3fe..ce0e5ab 100644
> --- a/include/linux/of_pci.h
> +++ b/include/linux/of_pci.h
> @@ -16,7 +16,6 @@ int of_pci_get_devfn(struct device_node *np);
>   int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
>   int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
>   int of_get_pci_domain_nr(struct device_node *node);
> -void of_pci_dma_configure(struct pci_dev *pci_dev);
>   #else
>   static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
>   {
> @@ -51,8 +50,6 @@ of_get_pci_domain_nr(struct device_node *node)
>   {
>   	return -1;
>   }
> -
> -static inline void of_pci_dma_configure(struct pci_dev *pci_dev) { }
>   #endif
>
>   #if defined(CONFIG_OF_ADDRESS)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas Aug. 24, 2015, 5:32 p.m. UTC | #2
On Mon, Aug 24, 2015 at 9:41 AM, Suravee Suthikulpanit
<Suravee.Suthikulpanit@amd.com> wrote:
> Hi,
>
> Ping. Does anyone have any comments or suggestions?

Yes, I sent you some ideas a couple weeks ago.  I'll resend them.

> On 8/13/15 16:58, Suravee Suthikulpanit wrote:
>>
>> This patch refactors of_pci_dma_configure() into a more generic
>> pci_dma_configure(), which can be reused by non-OF code.
>> Then, it adds support for setting up PCI device DMA coherency from
>> ACPI _CCA object that should normally be specified in the DSDT node
>> of its PCI host bridge..
>>
>> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
>> CC: Bjorn Helgaas <bhelgaas@google.com>
>> CC: Catalin Marinas <catalin.marinas@arm.com>
>> CC: Will Deacon <will.deacon@arm.com>
>> CC: Rafael J. Wysocki <rjw@rjwysocki.net>
>> CC: Rob Herring <robh+dt@kernel.org>
>> CC: Murali Karicheri <m-karicheri2@ti.com>
>> ---
>> Note: According to the ACPI spec, the _CCA attribute is required
>>        for ARM64. Therefore, this patch is a pre-req for ACPI PCI
>>        support for ARM64 which is currently in development.
>>
>>        Also, this should not affect other architectures since
>>        if CCA is not required, the default value is coherent.
>>        Please see include/acpi/acpi_bus.h: acpi_check_dma() and
>>        drivers/acpi/scan.c: acpi_init_coherency() for more information
>>
>>   drivers/of/of_pci.c    | 20 --------------------
>>   drivers/pci/probe.c    | 35 +++++++++++++++++++++++++++++++++--
>>   include/linux/of_pci.h |  3 ---
>>   3 files changed, 33 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
>> index 5751dc5..b66ee4e 100644
>> --- a/drivers/of/of_pci.c
>> +++ b/drivers/of/of_pci.c
>> @@ -117,26 +117,6 @@ int of_get_pci_domain_nr(struct device_node *node)
>>   }
>>   EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>>
>> -/**
>> - * of_pci_dma_configure - Setup DMA configuration
>> - * @dev: ptr to pci_dev struct of the PCI device
>> - *
>> - * Function to update PCI devices's DMA configuration using the same
>> - * info from the OF node of host bridge's parent (if any).
>> - */
>> -void of_pci_dma_configure(struct pci_dev *pci_dev)
>> -{
>> -       struct device *dev = &pci_dev->dev;
>> -       struct device *bridge = pci_get_host_bridge_device(pci_dev);
>> -
>> -       if (!bridge->parent)
>> -               return;
>> -
>> -       of_dma_configure(dev, bridge->parent->of_node);
>> -       pci_put_host_bridge_device(bridge);
>> -}
>> -EXPORT_SYMBOL_GPL(of_pci_dma_configure);
>> -
>>   #if defined(CONFIG_OF_ADDRESS)
>>   /**
>>    * of_pci_get_host_bridge_resources - Parse PCI host bridge resources
>> from DT
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index cefd636..e2fcd3b 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -6,12 +6,14 @@
>>   #include <linux/delay.h>
>>   #include <linux/init.h>
>>   #include <linux/pci.h>
>> -#include <linux/of_pci.h>
>> +#include <linux/of_device.h>
>>   #include <linux/pci_hotplug.h>
>>   #include <linux/slab.h>
>>   #include <linux/module.h>
>>   #include <linux/cpumask.h>
>>   #include <linux/pci-aspm.h>
>> +#include <linux/acpi.h>
>> +#include <linux/property.h>
>>   #include <asm-generic/pci-bridge.h>
>>   #include "pci.h"
>>
>> @@ -1544,6 +1546,35 @@ static void pci_init_capabilities(struct pci_dev
>> *dev)
>>         pci_enable_acs(dev);
>>   }
>>
>> +/**
>> + * pci_dma_configure - Setup DMA configuration
>> + * @pci_dev: ptr to pci_dev struct of the PCI device
>> + *
>> + * Function to update PCI devices's DMA configuration using the same
>> + * info from the OF node or ACPI node of host bridge's parent (if any).
>> + */
>> +static void pci_dma_configure(struct pci_dev *pci_dev)
>> +{
>> +       struct device *dev = &pci_dev->dev;
>> +       struct device *bridge = pci_get_host_bridge_device(pci_dev);
>> +       struct acpi_device *adev;
>> +       bool coherent;
>> +
>> +       if (has_acpi_companion(bridge)) {
>> +               adev = to_acpi_node(bridge->fwnode);
>> +               if (acpi_check_dma(adev, &coherent))
>> +                       arch_setup_dma_ops(dev, 0, 0, NULL, coherent);
>> +       } else {
>> +               struct device *host = bridge->parent;
>> +               if (!host)
>> +                       return;
>> +
>> +               of_dma_configure(dev, host->of_node);
>> +       }
>> +
>> +       pci_put_host_bridge_device(bridge);
>> +}
>> +
>>   void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
>>   {
>>         int ret;
>> @@ -1557,7 +1588,7 @@ void pci_device_add(struct pci_dev *dev, struct
>> pci_bus *bus)
>>         dev->dev.dma_mask = &dev->dma_mask;
>>         dev->dev.dma_parms = &dev->dma_parms;
>>         dev->dev.coherent_dma_mask = 0xffffffffull;
>> -       of_pci_dma_configure(dev);
>> +       pci_dma_configure(dev);
>>
>>         pci_set_dma_max_seg_size(dev, 65536);
>>         pci_set_dma_seg_boundary(dev, 0xffffffff);
>> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
>> index 29fd3fe..ce0e5ab 100644
>> --- a/include/linux/of_pci.h
>> +++ b/include/linux/of_pci.h
>> @@ -16,7 +16,6 @@ int of_pci_get_devfn(struct device_node *np);
>>   int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8
>> pin);
>>   int of_pci_parse_bus_range(struct device_node *node, struct resource
>> *res);
>>   int of_get_pci_domain_nr(struct device_node *node);
>> -void of_pci_dma_configure(struct pci_dev *pci_dev);
>>   #else
>>   static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct
>> of_phandle_args *out_irq)
>>   {
>> @@ -51,8 +50,6 @@ of_get_pci_domain_nr(struct device_node *node)
>>   {
>>         return -1;
>>   }
>> -
>> -static inline void of_pci_dma_configure(struct pci_dev *pci_dev) { }
>>   #endif
>>
>>   #if defined(CONFIG_OF_ADDRESS)
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Suravee Suthikulpanit Aug. 24, 2015, 6:02 p.m. UTC | #3
Hi,

On 8/25/15 00:32, Bjorn Helgaas wrote:
> On Mon, Aug 24, 2015 at 9:41 AM, Suravee Suthikulpanit
> <Suravee.Suthikulpanit@amd.com>  wrote:
>> >Hi,
>> >
>> >Ping. Does anyone have any comments or suggestions?
> Yes, I sent you some ideas a couple weeks ago.  I'll resend them.
>

Not sure how I missed that one. Sorry.

Thanks again,

Suravee
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 5751dc5..b66ee4e 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -117,26 +117,6 @@  int of_get_pci_domain_nr(struct device_node *node)
 }
 EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
 
-/**
- * of_pci_dma_configure - Setup DMA configuration
- * @dev: ptr to pci_dev struct of the PCI device
- *
- * Function to update PCI devices's DMA configuration using the same
- * info from the OF node of host bridge's parent (if any).
- */
-void of_pci_dma_configure(struct pci_dev *pci_dev)
-{
-	struct device *dev = &pci_dev->dev;
-	struct device *bridge = pci_get_host_bridge_device(pci_dev);
-
-	if (!bridge->parent)
-		return;
-
-	of_dma_configure(dev, bridge->parent->of_node);
-	pci_put_host_bridge_device(bridge);
-}
-EXPORT_SYMBOL_GPL(of_pci_dma_configure);
-
 #if defined(CONFIG_OF_ADDRESS)
 /**
  * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index cefd636..e2fcd3b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -6,12 +6,14 @@ 
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <linux/of_pci.h>
+#include <linux/of_device.h>
 #include <linux/pci_hotplug.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/cpumask.h>
 #include <linux/pci-aspm.h>
+#include <linux/acpi.h>
+#include <linux/property.h>
 #include <asm-generic/pci-bridge.h>
 #include "pci.h"
 
@@ -1544,6 +1546,35 @@  static void pci_init_capabilities(struct pci_dev *dev)
 	pci_enable_acs(dev);
 }
 
+/**
+ * pci_dma_configure - Setup DMA configuration
+ * @pci_dev: ptr to pci_dev struct of the PCI device
+ *
+ * Function to update PCI devices's DMA configuration using the same
+ * info from the OF node or ACPI node of host bridge's parent (if any).
+ */
+static void pci_dma_configure(struct pci_dev *pci_dev)
+{
+	struct device *dev = &pci_dev->dev;
+	struct device *bridge = pci_get_host_bridge_device(pci_dev);
+	struct acpi_device *adev;
+	bool coherent;
+
+	if (has_acpi_companion(bridge)) {
+		adev = to_acpi_node(bridge->fwnode);
+		if (acpi_check_dma(adev, &coherent))
+			arch_setup_dma_ops(dev, 0, 0, NULL, coherent);
+	} else {
+		struct device *host = bridge->parent;
+		if (!host)
+			return;
+
+		of_dma_configure(dev, host->of_node);
+	}
+
+	pci_put_host_bridge_device(bridge);
+}
+
 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 {
 	int ret;
@@ -1557,7 +1588,7 @@  void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 	dev->dev.dma_mask = &dev->dma_mask;
 	dev->dev.dma_parms = &dev->dma_parms;
 	dev->dev.coherent_dma_mask = 0xffffffffull;
-	of_pci_dma_configure(dev);
+	pci_dma_configure(dev);
 
 	pci_set_dma_max_seg_size(dev, 65536);
 	pci_set_dma_seg_boundary(dev, 0xffffffff);
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index 29fd3fe..ce0e5ab 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -16,7 +16,6 @@  int of_pci_get_devfn(struct device_node *np);
 int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
 int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
 int of_get_pci_domain_nr(struct device_node *node);
-void of_pci_dma_configure(struct pci_dev *pci_dev);
 #else
 static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
 {
@@ -51,8 +50,6 @@  of_get_pci_domain_nr(struct device_node *node)
 {
 	return -1;
 }
-
-static inline void of_pci_dma_configure(struct pci_dev *pci_dev) { }
 #endif
 
 #if defined(CONFIG_OF_ADDRESS)