diff mbox

[2/2] arm64: dts: mt8173: Add thermal zone node for mt8173.

Message ID 1441357309-61669-3-git-send-email-dawei.chien@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dawei Chien Sept. 4, 2015, 9:01 a.m. UTC
Add thermal zone node to mt8173.dtsi.

Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
This patch is base on following patches
https://patchwork.kernel.org/patch/6969581/
https://patchwork.kernel.org/patch/6969571/
https://patchwork.kernel.org/patch/6969381/
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |   44 ++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

Comments

Daniel Kurtz Sept. 7, 2015, 4 a.m. UTC | #1
Hi Dawei,

On Fri, Sep 4, 2015 at 5:01 PM, Dawei Chien <dawei.chien@mediatek.com> wrote:
> Add thermal zone node to mt8173.dtsi.
>
> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> ---
> This patch is base on following patches
> https://patchwork.kernel.org/patch/6969581/
> https://patchwork.kernel.org/patch/6969571/
> https://patchwork.kernel.org/patch/6969381/
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |   44 ++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 208051a..6493bfd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -17,6 +17,7 @@
>  #include <dt-bindings/power/mt8173-power.h>
>  #include <dt-bindings/reset-controller/mt8173-resets.h>
>  #include "mt8173-pinfunc.h"
> +#include <dt-bindings/thermal/thermal.h>

This include is not necessary, however...

>
>  / {
>         compatible = "mediatek,mt8173";
> @@ -116,6 +117,49 @@
>                 clock-output-names = "clk32k";
>         };
>
> +       thermal-zones {
> +               cpu_thermal: cpu_thermal {
> +                       polling-delay-passive = <1000>; /* milliseconds */
> +                       polling-delay = <1000>; /* milliseconds */
> +
> +                       thermal-sensors = <&thermal MT8173_THERMAL_ZONE_CA57>;

this fails to compile, because MT8173_THERMAL_ZONE_CA57 is defined in:

include/dt-bindings/thermal/mt8173.h

-Dan


> +                       sustainable-power = <1500>;
> +
> +                       trips {
> +                               threshold: trip-point@0 {
> +                                       temperature = <68000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               target: trip-point@1 {
> +                                       temperature = <85000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit: cpu_crit@0 {
> +                                       temperature = <115000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +
> +                       cooling-maps {
> +                               map@0 {
> +                                       trip = <&target>;
> +                                       cooling-device = <&cpu0 0 0>;
> +                                       contribution = <1024>;
> +                               };
> +                               map@1 {
> +                                       trip = <&target>;
> +                                       cooling-device = <&cpu2 0 0>;
> +                                       contribution = <2048>;
> +                               };
> +                       };
> +               };
> +       };
> +
>         timer {
>                 compatible = "arm,armv8-timer";
>                 interrupt-parent = <&gic>;
> --
> 1.7.9.5
>
Daniel Kurtz Sept. 7, 2015, 4:05 a.m. UTC | #2
On Mon, Sep 7, 2015 at 12:00 PM, Daniel Kurtz <djkurtz@chromium.org> wrote:
> Hi Dawei,
>
> On Fri, Sep 4, 2015 at 5:01 PM, Dawei Chien <dawei.chien@mediatek.com> wrote:
>> Add thermal zone node to mt8173.dtsi.
>>
>> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
>> ---
>> This patch is base on following patches
>> https://patchwork.kernel.org/patch/6969581/
>> https://patchwork.kernel.org/patch/6969571/
>> https://patchwork.kernel.org/patch/6969381/
>> ---
>>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |   44 ++++++++++++++++++++++++++++++
>>  1 file changed, 44 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> index 208051a..6493bfd 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> @@ -17,6 +17,7 @@
>>  #include <dt-bindings/power/mt8173-power.h>
>>  #include <dt-bindings/reset-controller/mt8173-resets.h>
>>  #include "mt8173-pinfunc.h"
>> +#include <dt-bindings/thermal/thermal.h>

Also, as a nit, (#include <dt-bindings/thermal/mt8173.h>) should be
above '#include "mt8173-pinfunc.h"'

-djk
Dawei Chien Sept. 8, 2015, 3:50 p.m. UTC | #3
Hi Daniel,
On Mon, 2015-09-07 at 12:05 +0800, Daniel Kurtz wrote:
> On Mon, Sep 7, 2015 at 12:00 PM, Daniel Kurtz <djkurtz@chromium.org> wrote:
> > Hi Dawei,
> >
> > On Fri, Sep 4, 2015 at 5:01 PM, Dawei Chien <dawei.chien@mediatek.com> wrote:
> >> Add thermal zone node to mt8173.dtsi.
> >>
> >> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> >> ---
> >> This patch is base on following patches
> >> https://patchwork.kernel.org/patch/6969581/
> >> https://patchwork.kernel.org/patch/6969571/
> >> https://patchwork.kernel.org/patch/6969381/
> >> ---
> >>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |   44 ++++++++++++++++++++++++++++++
> >>  1 file changed, 44 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >> index 208051a..6493bfd 100644
> >> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >> @@ -17,6 +17,7 @@
> >>  #include <dt-bindings/power/mt8173-power.h>
> >>  #include <dt-bindings/reset-controller/mt8173-resets.h>
> >>  #include "mt8173-pinfunc.h"
> >> +#include <dt-bindings/thermal/thermal.h>
> 
> Also, as a nit, (#include <dt-bindings/thermal/mt8173.h>) should be
> above '#include "mt8173-pinfunc.h"'
Thank you, I will resend this patch with mt8171.h and sort header file.

> -djk
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 208051a..6493bfd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -17,6 +17,7 @@ 
 #include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "mediatek,mt8173";
@@ -116,6 +117,49 @@ 
 		clock-output-names = "clk32k";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal MT8173_THERMAL_ZONE_CA57>;
+			sustainable-power = <1500>;
+
+			trips {
+				threshold: trip-point@0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point@1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit@0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map@0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 0>;
+					contribution = <1024>;
+				};
+				map@1 {
+					trip = <&target>;
+					cooling-device = <&cpu2 0 0>;
+					contribution = <2048>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;