| Message ID | 1439212864-12954-8-git-send-email-eric.auger@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Aug 10, 2015 at 03:21:01PM +0200, Eric Auger wrote: > From: Marc Zyngier <marc.zyngier@arm.com> > > So far, the only use of the HW interrupt facility was the timer, > implying that the active state is context-switched for each vcpu, > as the device is is shared across all vcpus. > > This does not work for a device that has been assigned to a VM, > as the guest is entierely in control of that device (the HW is > not shared). In that case, it makes sense to bypass the whole > active state switching. > > Also the VGIC state machine is adapted to support those assigned > (non shared) HW IRQs: > - nly can be sampled when it is pending > - when queueing the IRQ (programming the LR), the pending state is > removed as for edge sensitive IRQs > - queued state is not modelled. Level state is not modelled > - its injection always is valid since steming from the HW. > > Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> > Signed-off-by: Eric Auger <eric.auger@linaro.org> > > --- > > - a mix of > [PATCH v4 11/11] KVM: arm/arm64: vgic: Allow HW interrupts for > non-shared devices > [RFC v2 2/4] KVM: arm: vgic: fix state machine for forwarded IRQ > --- > include/kvm/arm_vgic.h | 6 +++-- > virt/kvm/arm/arch_timer.c | 3 ++- > virt/kvm/arm/vgic.c | 58 +++++++++++++++++++++++++++++++++++------------ > 3 files changed, 49 insertions(+), 18 deletions(-) > > diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h > index d901f1a..7ef9ce0 100644 > --- a/include/kvm/arm_vgic.h > +++ b/include/kvm/arm_vgic.h > @@ -163,7 +163,8 @@ struct irq_phys_map { > u32 virt_irq; > u32 phys_irq; > u32 irq; > - bool active; > + bool shared; > + bool active; /* Only valid if shared */ > }; > > struct irq_phys_map_entry { > @@ -356,7 +357,8 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg); > int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu); > int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu); > struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, > - int virt_irq, int irq); > + int virt_irq, int irq, > + bool shared); > int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map); > bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map); > void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active); > diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c > index 76e38d2..db21d8f 100644 > --- a/virt/kvm/arm/arch_timer.c > +++ b/virt/kvm/arm/arch_timer.c > @@ -203,7 +203,8 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu, > * Tell the VGIC that the virtual interrupt is tied to a > * physical interrupt. We do that once per VCPU. > */ > - map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq); > + map = kvm_vgic_map_phys_irq(vcpu, irq->irq, > + host_vtimer_irq, true); > if (WARN_ON(IS_ERR(map))) > return PTR_ERR(map); > > diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c > index 9eb489a..fbd5ba5 100644 > --- a/virt/kvm/arm/vgic.c > +++ b/virt/kvm/arm/vgic.c > @@ -400,7 +400,11 @@ void vgic_cpu_irq_clear(struct kvm_vcpu *vcpu, int irq) > > static bool vgic_can_sample_irq(struct kvm_vcpu *vcpu, int irq) > { > - return !vgic_irq_is_queued(vcpu, irq); > + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); > + bool shared_hw = map && !map->shared; why is shared true when map->shared is false? > + > + return !vgic_irq_is_queued(vcpu, irq) || > + (shared_hw && vgic_dist_irq_is_pending(vcpu, irq)); so for forwarded, non-shared, level-triggered IRQs, we always sample the line if it's pending? Why? > } > > /** > @@ -1150,19 +1154,26 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, > * active in the physical world. Otherwise the > * physical interrupt will fire and the guest will > * exit before processing the virtual interrupt. > + * > + * This is of course only valid for a shared > + * interrupt. A non shared interrupt should already be > + * active. > */ > if (map) { > - int ret; > - > - BUG_ON(!map->active); > vlr.hwirq = map->phys_irq; > vlr.state |= LR_HW; > vlr.state &= ~LR_EOI_INT; > > - ret = irq_set_irqchip_state(map->irq, > - IRQCHIP_STATE_ACTIVE, > - true); > - WARN_ON(ret); > + if (map->shared) { > + int ret; > + > + BUG_ON(!map->active); > + ret = irq_set_irqchip_state( > + map->irq, > + IRQCHIP_STATE_ACTIVE, > + true); > + WARN_ON(ret); > + } this stuff all needs to be rebased onto my latest timer/active state rework series. > > /* > * Make sure we're not going to sample this > @@ -1229,10 +1240,13 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) > > static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq) > { > + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); > + bool shared_hw = map && !map->shared; same question as above? > + > if (!vgic_can_sample_irq(vcpu, irq)) > return true; /* level interrupt, already queued */ > > - if (vgic_queue_irq(vcpu, 0, irq)) { > + if (vgic_queue_irq(vcpu, 0, irq) || shared_hw) { > if (vgic_irq_is_edge(vcpu, irq)) { > vgic_dist_irq_clear_pending(vcpu, irq); > vgic_cpu_irq_clear(vcpu, irq); > @@ -1411,7 +1425,12 @@ static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr) > return 0; > > map = vgic_irq_map_search(vcpu, vlr.irq); > - BUG_ON(!map || !map->active); > + BUG_ON(!map); > + > + if (!map->shared) > + return 0; > + > + BUG_ON(map->shared && !map->active); > > ret = irq_get_irqchip_state(map->irq, > IRQCHIP_STATE_ACTIVE, > @@ -1563,6 +1582,7 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, > int edge_triggered, level_triggered; > int enabled; > bool ret = true, can_inject = true; > + bool shared_hw = map && !map->shared; same > > if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020)) > return -EINVAL; > @@ -1573,7 +1593,8 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, > edge_triggered = vgic_irq_is_edge(vcpu, irq_num); > level_triggered = !edge_triggered; > > - if (!vgic_validate_injection(vcpu, irq_num, level)) { > + if (!vgic_validate_injection(vcpu, irq_num, level) && > + !shared_hw) { > ret = false; > goto out; > } > @@ -1742,16 +1763,21 @@ static struct list_head *vgic_get_irq_phys_map_list(struct kvm_vcpu *vcpu, > * @vcpu: The VCPU pointer > * @virt_irq: The virtual irq number > * @irq: The Linux IRQ number > + * @shared: Indicates if the interrupt has to be context-switched or > + * if it is private to a VM > * > * Establish a mapping between a guest visible irq (@virt_irq) and a > * Linux irq (@irq). On injection, @virt_irq will be associated with > * the physical interrupt represented by @irq. This mapping can be > * established multiple times as long as the parameters are the same. > + * If @shared is true, the active state of the interrupt will be > + * context-switched. > * > * Returns a valid pointer on success, and an error pointer otherwise > */ > struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, > - int virt_irq, int irq) > + int virt_irq, int irq, > + bool shared) > { > struct vgic_dist *dist = &vcpu->kvm->arch.vgic; > struct list_head *root = vgic_get_irq_phys_map_list(vcpu, virt_irq); > @@ -1785,7 +1811,8 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, > if (map) { > /* Make sure this mapping matches */ > if (map->phys_irq != phys_irq || > - map->irq != irq) > + map->irq != irq || > + map->shared != shared) > map = ERR_PTR(-EINVAL); > > /* Found an existing, valid mapping */ > @@ -1796,6 +1823,7 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, > map->virt_irq = virt_irq; > map->phys_irq = phys_irq; > map->irq = irq; > + map->shared = shared; > > list_add_tail_rcu(&entry->entry, root); > > @@ -1846,7 +1874,7 @@ static void vgic_free_phys_irq_map_rcu(struct rcu_head *rcu) > */ > bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) > { > - BUG_ON(!map); > + BUG_ON(!map || !map->shared); > return map->active; > } > > @@ -1858,7 +1886,7 @@ bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) > */ > void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active) > { > - BUG_ON(!map); > + BUG_ON(!map || !map->shared); > map->active = active; > } > > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Christoffer, On 09/02/2015 09:42 PM, Christoffer Dall wrote: > On Mon, Aug 10, 2015 at 03:21:01PM +0200, Eric Auger wrote: >> From: Marc Zyngier <marc.zyngier@arm.com> >> >> So far, the only use of the HW interrupt facility was the timer, >> implying that the active state is context-switched for each vcpu, >> as the device is is shared across all vcpus. >> >> This does not work for a device that has been assigned to a VM, >> as the guest is entierely in control of that device (the HW is >> not shared). In that case, it makes sense to bypass the whole >> active state switching. >> >> Also the VGIC state machine is adapted to support those assigned >> (non shared) HW IRQs: >> - nly can be sampled when it is pending >> - when queueing the IRQ (programming the LR), the pending state is >> removed as for edge sensitive IRQs >> - queued state is not modelled. Level state is not modelled >> - its injection always is valid since steming from the HW. >> >> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> >> Signed-off-by: Eric Auger <eric.auger@linaro.org> >> >> --- >> >> - a mix of >> [PATCH v4 11/11] KVM: arm/arm64: vgic: Allow HW interrupts for >> non-shared devices >> [RFC v2 2/4] KVM: arm: vgic: fix state machine for forwarded IRQ >> --- >> include/kvm/arm_vgic.h | 6 +++-- >> virt/kvm/arm/arch_timer.c | 3 ++- >> virt/kvm/arm/vgic.c | 58 +++++++++++++++++++++++++++++++++++------------ >> 3 files changed, 49 insertions(+), 18 deletions(-) >> >> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h >> index d901f1a..7ef9ce0 100644 >> --- a/include/kvm/arm_vgic.h >> +++ b/include/kvm/arm_vgic.h >> @@ -163,7 +163,8 @@ struct irq_phys_map { >> u32 virt_irq; >> u32 phys_irq; >> u32 irq; >> - bool active; >> + bool shared; >> + bool active; /* Only valid if shared */ >> }; >> >> struct irq_phys_map_entry { >> @@ -356,7 +357,8 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg); >> int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu); >> int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu); >> struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> - int virt_irq, int irq); >> + int virt_irq, int irq, >> + bool shared); >> int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map); >> bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map); >> void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active); >> diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c >> index 76e38d2..db21d8f 100644 >> --- a/virt/kvm/arm/arch_timer.c >> +++ b/virt/kvm/arm/arch_timer.c >> @@ -203,7 +203,8 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu, >> * Tell the VGIC that the virtual interrupt is tied to a >> * physical interrupt. We do that once per VCPU. >> */ >> - map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq); >> + map = kvm_vgic_map_phys_irq(vcpu, irq->irq, >> + host_vtimer_irq, true); >> if (WARN_ON(IS_ERR(map))) >> return PTR_ERR(map); >> >> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c >> index 9eb489a..fbd5ba5 100644 >> --- a/virt/kvm/arm/vgic.c >> +++ b/virt/kvm/arm/vgic.c >> @@ -400,7 +400,11 @@ void vgic_cpu_irq_clear(struct kvm_vcpu *vcpu, int irq) >> >> static bool vgic_can_sample_irq(struct kvm_vcpu *vcpu, int irq) >> { >> - return !vgic_irq_is_queued(vcpu, irq); >> + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); >> + bool shared_hw = map && !map->shared; > > why is shared true when map->shared is false? definitively upside down > >> + >> + return !vgic_irq_is_queued(vcpu, irq) || >> + (shared_hw && vgic_dist_irq_is_pending(vcpu, irq)); > > so for forwarded, non-shared, level-triggered IRQs, we always sample the > line if it's pending? Why? No we only sampled it if it was pending. The pending state was reset when programming the LR. Now that we model the queued state for mapped IRQ I will use that instead > >> } >> >> /** >> @@ -1150,19 +1154,26 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, >> * active in the physical world. Otherwise the >> * physical interrupt will fire and the guest will >> * exit before processing the virtual interrupt. >> + * >> + * This is of course only valid for a shared >> + * interrupt. A non shared interrupt should already be >> + * active. >> */ >> if (map) { >> - int ret; >> - >> - BUG_ON(!map->active); >> vlr.hwirq = map->phys_irq; >> vlr.state |= LR_HW; >> vlr.state &= ~LR_EOI_INT; >> >> - ret = irq_set_irqchip_state(map->irq, >> - IRQCHIP_STATE_ACTIVE, >> - true); >> - WARN_ON(ret); >> + if (map->shared) { >> + int ret; >> + >> + BUG_ON(!map->active); >> + ret = irq_set_irqchip_state( >> + map->irq, >> + IRQCHIP_STATE_ACTIVE, >> + true); >> + WARN_ON(ret); >> + } > > this stuff all needs to be rebased onto my latest timer/active state > rework series. sure, ongoing ... Thanks Eric > >> >> /* >> * Make sure we're not going to sample this >> @@ -1229,10 +1240,13 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) >> >> static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq) >> { >> + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); >> + bool shared_hw = map && !map->shared; > > same question as above? > >> + >> if (!vgic_can_sample_irq(vcpu, irq)) >> return true; /* level interrupt, already queued */ >> >> - if (vgic_queue_irq(vcpu, 0, irq)) { >> + if (vgic_queue_irq(vcpu, 0, irq) || shared_hw) { >> if (vgic_irq_is_edge(vcpu, irq)) { >> vgic_dist_irq_clear_pending(vcpu, irq); >> vgic_cpu_irq_clear(vcpu, irq); >> @@ -1411,7 +1425,12 @@ static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr) >> return 0; >> >> map = vgic_irq_map_search(vcpu, vlr.irq); >> - BUG_ON(!map || !map->active); >> + BUG_ON(!map); >> + >> + if (!map->shared) >> + return 0; >> + >> + BUG_ON(map->shared && !map->active); >> >> ret = irq_get_irqchip_state(map->irq, >> IRQCHIP_STATE_ACTIVE, >> @@ -1563,6 +1582,7 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, >> int edge_triggered, level_triggered; >> int enabled; >> bool ret = true, can_inject = true; >> + bool shared_hw = map && !map->shared; > > same > >> >> if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020)) >> return -EINVAL; >> @@ -1573,7 +1593,8 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, >> edge_triggered = vgic_irq_is_edge(vcpu, irq_num); >> level_triggered = !edge_triggered; >> >> - if (!vgic_validate_injection(vcpu, irq_num, level)) { >> + if (!vgic_validate_injection(vcpu, irq_num, level) && >> + !shared_hw) { >> ret = false; >> goto out; >> } >> @@ -1742,16 +1763,21 @@ static struct list_head *vgic_get_irq_phys_map_list(struct kvm_vcpu *vcpu, >> * @vcpu: The VCPU pointer >> * @virt_irq: The virtual irq number >> * @irq: The Linux IRQ number >> + * @shared: Indicates if the interrupt has to be context-switched or >> + * if it is private to a VM >> * >> * Establish a mapping between a guest visible irq (@virt_irq) and a >> * Linux irq (@irq). On injection, @virt_irq will be associated with >> * the physical interrupt represented by @irq. This mapping can be >> * established multiple times as long as the parameters are the same. >> + * If @shared is true, the active state of the interrupt will be >> + * context-switched. >> * >> * Returns a valid pointer on success, and an error pointer otherwise >> */ >> struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> - int virt_irq, int irq) >> + int virt_irq, int irq, >> + bool shared) >> { >> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >> struct list_head *root = vgic_get_irq_phys_map_list(vcpu, virt_irq); >> @@ -1785,7 +1811,8 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> if (map) { >> /* Make sure this mapping matches */ >> if (map->phys_irq != phys_irq || >> - map->irq != irq) >> + map->irq != irq || >> + map->shared != shared) >> map = ERR_PTR(-EINVAL); >> >> /* Found an existing, valid mapping */ >> @@ -1796,6 +1823,7 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> map->virt_irq = virt_irq; >> map->phys_irq = phys_irq; >> map->irq = irq; >> + map->shared = shared; >> >> list_add_tail_rcu(&entry->entry, root); >> >> @@ -1846,7 +1874,7 @@ static void vgic_free_phys_irq_map_rcu(struct rcu_head *rcu) >> */ >> bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) >> { >> - BUG_ON(!map); >> + BUG_ON(!map || !map->shared); >> return map->active; >> } >> >> @@ -1858,7 +1886,7 @@ bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) >> */ >> void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active) >> { >> - BUG_ON(!map); >> + BUG_ON(!map || !map->shared); >> map->active = active; >> } >> >> -- >> 1.9.1 >> -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Christoffer, On 09/02/2015 09:42 PM, Christoffer Dall wrote: > On Mon, Aug 10, 2015 at 03:21:01PM +0200, Eric Auger wrote: >> From: Marc Zyngier <marc.zyngier@arm.com> >> >> So far, the only use of the HW interrupt facility was the timer, >> implying that the active state is context-switched for each vcpu, >> as the device is is shared across all vcpus. >> >> This does not work for a device that has been assigned to a VM, >> as the guest is entierely in control of that device (the HW is >> not shared). In that case, it makes sense to bypass the whole >> active state switching. >> >> Also the VGIC state machine is adapted to support those assigned >> (non shared) HW IRQs: >> - nly can be sampled when it is pending >> - when queueing the IRQ (programming the LR), the pending state is >> removed as for edge sensitive IRQs >> - queued state is not modelled. Level state is not modelled >> - its injection always is valid since steming from the HW. >> >> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> >> Signed-off-by: Eric Auger <eric.auger@linaro.org> >> >> --- >> >> - a mix of >> [PATCH v4 11/11] KVM: arm/arm64: vgic: Allow HW interrupts for >> non-shared devices >> [RFC v2 2/4] KVM: arm: vgic: fix state machine for forwarded IRQ >> --- >> include/kvm/arm_vgic.h | 6 +++-- >> virt/kvm/arm/arch_timer.c | 3 ++- >> virt/kvm/arm/vgic.c | 58 +++++++++++++++++++++++++++++++++++------------ >> 3 files changed, 49 insertions(+), 18 deletions(-) >> >> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h >> index d901f1a..7ef9ce0 100644 >> --- a/include/kvm/arm_vgic.h >> +++ b/include/kvm/arm_vgic.h >> @@ -163,7 +163,8 @@ struct irq_phys_map { >> u32 virt_irq; >> u32 phys_irq; >> u32 irq; >> - bool active; >> + bool shared; >> + bool active; /* Only valid if shared */ >> }; >> >> struct irq_phys_map_entry { >> @@ -356,7 +357,8 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg); >> int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu); >> int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu); >> struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> - int virt_irq, int irq); >> + int virt_irq, int irq, >> + bool shared); >> int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map); >> bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map); >> void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active); >> diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c >> index 76e38d2..db21d8f 100644 >> --- a/virt/kvm/arm/arch_timer.c >> +++ b/virt/kvm/arm/arch_timer.c >> @@ -203,7 +203,8 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu, >> * Tell the VGIC that the virtual interrupt is tied to a >> * physical interrupt. We do that once per VCPU. >> */ >> - map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq); >> + map = kvm_vgic_map_phys_irq(vcpu, irq->irq, >> + host_vtimer_irq, true); >> if (WARN_ON(IS_ERR(map))) >> return PTR_ERR(map); >> >> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c >> index 9eb489a..fbd5ba5 100644 >> --- a/virt/kvm/arm/vgic.c >> +++ b/virt/kvm/arm/vgic.c >> @@ -400,7 +400,11 @@ void vgic_cpu_irq_clear(struct kvm_vcpu *vcpu, int irq) >> >> static bool vgic_can_sample_irq(struct kvm_vcpu *vcpu, int irq) >> { >> - return !vgic_irq_is_queued(vcpu, irq); >> + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); >> + bool shared_hw = map && !map->shared; > > why is shared true when map->shared is false? > >> + >> + return !vgic_irq_is_queued(vcpu, irq) || >> + (shared_hw && vgic_dist_irq_is_pending(vcpu, irq)); > > so for forwarded, non-shared, level-triggered IRQs, we always sample the > line if it's pending? Why? I tried to integrate into the updated state machine for non shared mapped IRQ but I fail. 1) The first problem encountered is how to reset the level of the IRQ (since its completion is not trapped). I added this reset in process_queued_irq. I think this was the most natural place since at sink time we get aware the IRQ is deactivated at physical distributor level. However I observe failures in vgic_validate_injection. I think there is due to a race between update_irq_pending and sync. As soon as the guest EOI's the virtual IRQ (and also the pIRQ), a new physical IRQ hits and gets injected by irqfd. This injection can happen before the sync. So I would be tempted to keep my current strategy of ignoring the validate_injection in case of non-shared mapped IRQ and not model the level state. The vIRQ directly comes from the HW so it must be valid (guest deactivated the previous occurence). 2) can_sample. once the above problem fixed, next issue is the can_sample failure. Queued state also is reset in process_queued_irq and can_sample fails. Same punishment. So currently the only manner I found to make this work and sample the IRQ only once is to use the pending state which I reset when I queue the IRQ. So currently I don't think non-shared mapped IRQ fit the updated state machine. Any Thoughts? Eric > >> } >> >> /** >> @@ -1150,19 +1154,26 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, >> * active in the physical world. Otherwise the >> * physical interrupt will fire and the guest will >> * exit before processing the virtual interrupt. >> + * >> + * This is of course only valid for a shared >> + * interrupt. A non shared interrupt should already be >> + * active. >> */ >> if (map) { >> - int ret; >> - >> - BUG_ON(!map->active); >> vlr.hwirq = map->phys_irq; >> vlr.state |= LR_HW; >> vlr.state &= ~LR_EOI_INT; >> >> - ret = irq_set_irqchip_state(map->irq, >> - IRQCHIP_STATE_ACTIVE, >> - true); >> - WARN_ON(ret); >> + if (map->shared) { >> + int ret; >> + >> + BUG_ON(!map->active); >> + ret = irq_set_irqchip_state( >> + map->irq, >> + IRQCHIP_STATE_ACTIVE, >> + true); >> + WARN_ON(ret); >> + } > > this stuff all needs to be rebased onto my latest timer/active state > rework series. > >> >> /* >> * Make sure we're not going to sample this >> @@ -1229,10 +1240,13 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) >> >> static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq) >> { >> + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); >> + bool shared_hw = map && !map->shared; > > same question as above? > >> + >> if (!vgic_can_sample_irq(vcpu, irq)) >> return true; /* level interrupt, already queued */ >> >> - if (vgic_queue_irq(vcpu, 0, irq)) { >> + if (vgic_queue_irq(vcpu, 0, irq) || shared_hw) { >> if (vgic_irq_is_edge(vcpu, irq)) { >> vgic_dist_irq_clear_pending(vcpu, irq); >> vgic_cpu_irq_clear(vcpu, irq); >> @@ -1411,7 +1425,12 @@ static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr) >> return 0; >> >> map = vgic_irq_map_search(vcpu, vlr.irq); >> - BUG_ON(!map || !map->active); >> + BUG_ON(!map); >> + >> + if (!map->shared) >> + return 0; >> + >> + BUG_ON(map->shared && !map->active); >> >> ret = irq_get_irqchip_state(map->irq, >> IRQCHIP_STATE_ACTIVE, >> @@ -1563,6 +1582,7 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, >> int edge_triggered, level_triggered; >> int enabled; >> bool ret = true, can_inject = true; >> + bool shared_hw = map && !map->shared; > > same > >> >> if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020)) >> return -EINVAL; >> @@ -1573,7 +1593,8 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, >> edge_triggered = vgic_irq_is_edge(vcpu, irq_num); >> level_triggered = !edge_triggered; >> >> - if (!vgic_validate_injection(vcpu, irq_num, level)) { >> + if (!vgic_validate_injection(vcpu, irq_num, level) && >> + !shared_hw) { >> ret = false; >> goto out; >> } >> @@ -1742,16 +1763,21 @@ static struct list_head *vgic_get_irq_phys_map_list(struct kvm_vcpu *vcpu, >> * @vcpu: The VCPU pointer >> * @virt_irq: The virtual irq number >> * @irq: The Linux IRQ number >> + * @shared: Indicates if the interrupt has to be context-switched or >> + * if it is private to a VM >> * >> * Establish a mapping between a guest visible irq (@virt_irq) and a >> * Linux irq (@irq). On injection, @virt_irq will be associated with >> * the physical interrupt represented by @irq. This mapping can be >> * established multiple times as long as the parameters are the same. >> + * If @shared is true, the active state of the interrupt will be >> + * context-switched. >> * >> * Returns a valid pointer on success, and an error pointer otherwise >> */ >> struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> - int virt_irq, int irq) >> + int virt_irq, int irq, >> + bool shared) >> { >> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >> struct list_head *root = vgic_get_irq_phys_map_list(vcpu, virt_irq); >> @@ -1785,7 +1811,8 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> if (map) { >> /* Make sure this mapping matches */ >> if (map->phys_irq != phys_irq || >> - map->irq != irq) >> + map->irq != irq || >> + map->shared != shared) >> map = ERR_PTR(-EINVAL); >> >> /* Found an existing, valid mapping */ >> @@ -1796,6 +1823,7 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, >> map->virt_irq = virt_irq; >> map->phys_irq = phys_irq; >> map->irq = irq; >> + map->shared = shared; >> >> list_add_tail_rcu(&entry->entry, root); >> >> @@ -1846,7 +1874,7 @@ static void vgic_free_phys_irq_map_rcu(struct rcu_head *rcu) >> */ >> bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) >> { >> - BUG_ON(!map); >> + BUG_ON(!map || !map->shared); >> return map->active; >> } >> >> @@ -1858,7 +1886,7 @@ bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) >> */ >> void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active) >> { >> - BUG_ON(!map); >> + BUG_ON(!map || !map->shared); >> map->active = active; >> } >> >> -- >> 1.9.1 >> -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 08, 2015 at 02:04:15PM +0200, Eric Auger wrote: > Hi Christoffer, > On 09/02/2015 09:42 PM, Christoffer Dall wrote: > > On Mon, Aug 10, 2015 at 03:21:01PM +0200, Eric Auger wrote: > >> From: Marc Zyngier <marc.zyngier@arm.com> > >> > >> So far, the only use of the HW interrupt facility was the timer, > >> implying that the active state is context-switched for each vcpu, > >> as the device is is shared across all vcpus. > >> > >> This does not work for a device that has been assigned to a VM, > >> as the guest is entierely in control of that device (the HW is > >> not shared). In that case, it makes sense to bypass the whole > >> active state switching. > >> > >> Also the VGIC state machine is adapted to support those assigned > >> (non shared) HW IRQs: > >> - nly can be sampled when it is pending > >> - when queueing the IRQ (programming the LR), the pending state is > >> removed as for edge sensitive IRQs > >> - queued state is not modelled. Level state is not modelled > >> - its injection always is valid since steming from the HW. > >> > >> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> > >> Signed-off-by: Eric Auger <eric.auger@linaro.org> > >> > >> --- > >> > >> - a mix of > >> [PATCH v4 11/11] KVM: arm/arm64: vgic: Allow HW interrupts for > >> non-shared devices > >> [RFC v2 2/4] KVM: arm: vgic: fix state machine for forwarded IRQ > >> --- > >> include/kvm/arm_vgic.h | 6 +++-- > >> virt/kvm/arm/arch_timer.c | 3 ++- > >> virt/kvm/arm/vgic.c | 58 +++++++++++++++++++++++++++++++++++------------ > >> 3 files changed, 49 insertions(+), 18 deletions(-) > >> > >> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h > >> index d901f1a..7ef9ce0 100644 > >> --- a/include/kvm/arm_vgic.h > >> +++ b/include/kvm/arm_vgic.h > >> @@ -163,7 +163,8 @@ struct irq_phys_map { > >> u32 virt_irq; > >> u32 phys_irq; > >> u32 irq; > >> - bool active; > >> + bool shared; > >> + bool active; /* Only valid if shared */ > >> }; > >> > >> struct irq_phys_map_entry { > >> @@ -356,7 +357,8 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg); > >> int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu); > >> int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu); > >> struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, > >> - int virt_irq, int irq); > >> + int virt_irq, int irq, > >> + bool shared); > >> int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map); > >> bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map); > >> void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active); > >> diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c > >> index 76e38d2..db21d8f 100644 > >> --- a/virt/kvm/arm/arch_timer.c > >> +++ b/virt/kvm/arm/arch_timer.c > >> @@ -203,7 +203,8 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu, > >> * Tell the VGIC that the virtual interrupt is tied to a > >> * physical interrupt. We do that once per VCPU. > >> */ > >> - map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq); > >> + map = kvm_vgic_map_phys_irq(vcpu, irq->irq, > >> + host_vtimer_irq, true); > >> if (WARN_ON(IS_ERR(map))) > >> return PTR_ERR(map); > >> > >> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c > >> index 9eb489a..fbd5ba5 100644 > >> --- a/virt/kvm/arm/vgic.c > >> +++ b/virt/kvm/arm/vgic.c > >> @@ -400,7 +400,11 @@ void vgic_cpu_irq_clear(struct kvm_vcpu *vcpu, int irq) > >> > >> static bool vgic_can_sample_irq(struct kvm_vcpu *vcpu, int irq) > >> { > >> - return !vgic_irq_is_queued(vcpu, irq); > >> + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); > >> + bool shared_hw = map && !map->shared; > > > > why is shared true when map->shared is false? > definitively upside down > > > >> + > >> + return !vgic_irq_is_queued(vcpu, irq) || > >> + (shared_hw && vgic_dist_irq_is_pending(vcpu, irq)); > > > > so for forwarded, non-shared, level-triggered IRQs, we always sample the > > line if it's pending? Why? > > No we only sampled it if it was pending. The pending state was reset > when programming the LR. > > Now that we model the queued state for mapped IRQ I will use that instead ok, it is certainly very counterintuitive to have to check the pending state only if the pending state is set. Not sure how this will look after your rework, but it may deserve a comment in either case. Thanks, -Christoffer -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Eric, On Wed, Sep 09, 2015 at 10:41:32AM +0200, Eric Auger wrote: [...] > I tried to integrate into the updated state machine for non shared > mapped IRQ but I fail. What exactly do you mean when you refer to 'updated state machine' ? > > 1) The first problem encountered is how to reset the level of the IRQ > (since its completion is not trapped). I added this reset in > process_queued_irq. I think this was the most natural place since at > sink time we get aware the IRQ is deactivated at physical distributor > level. However I observe failures in vgic_validate_injection. I think > there is due to a race between update_irq_pending and sync. As soon as > the guest EOI's the virtual IRQ (and also the pIRQ), a new physical IRQ > hits and gets injected by irqfd. This injection can happen before the > sync. So I would be tempted to keep my current strategy of ignoring the > validate_injection in case of non-shared mapped IRQ and not model the > level state. The vIRQ directly comes from the HW so it must be valid > (guest deactivated the previous occurence). I'm a bit confused about what we are talking about here? Are you asking about how we should deal with forwarded, level-triggered, non-shared interrupts? If that's the case, here are my high-level thoughts: - We should not maintain a virtual line state, because this is maintained in hardware - Ideally we sample the physical distributor pending state at the important points (sync/flush). - Sampling the physical state may be slow/difficult, so we may choose an optimization, for example cache the pending state when the host ISR runs and clear the pending state when the interrupt is injected and not care about spurious interrupts if the signal is lowered after it's raised. > > 2) can_sample. > once the above problem fixed, next issue is the can_sample failure. > Queued state also is reset in process_queued_irq and can_sample fails. > Same punishment. So currently the only manner I found to make this work > and sample the IRQ only once is to use the pending state which I reset > when I queue the IRQ. So queued means that we don't sample the virtual line state, yes? If so, then it would make sense to always set the state as queued for injected forwarded non-shared level-triggered interrupts. Does this help? -Christoffer -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h index d901f1a..7ef9ce0 100644 --- a/include/kvm/arm_vgic.h +++ b/include/kvm/arm_vgic.h @@ -163,7 +163,8 @@ struct irq_phys_map { u32 virt_irq; u32 phys_irq; u32 irq; - bool active; + bool shared; + bool active; /* Only valid if shared */ }; struct irq_phys_map_entry { @@ -356,7 +357,8 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg); int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu); int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu); struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, - int virt_irq, int irq); + int virt_irq, int irq, + bool shared); int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map); bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map); void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active); diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c index 76e38d2..db21d8f 100644 --- a/virt/kvm/arm/arch_timer.c +++ b/virt/kvm/arm/arch_timer.c @@ -203,7 +203,8 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu, * Tell the VGIC that the virtual interrupt is tied to a * physical interrupt. We do that once per VCPU. */ - map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq); + map = kvm_vgic_map_phys_irq(vcpu, irq->irq, + host_vtimer_irq, true); if (WARN_ON(IS_ERR(map))) return PTR_ERR(map); diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c index 9eb489a..fbd5ba5 100644 --- a/virt/kvm/arm/vgic.c +++ b/virt/kvm/arm/vgic.c @@ -400,7 +400,11 @@ void vgic_cpu_irq_clear(struct kvm_vcpu *vcpu, int irq) static bool vgic_can_sample_irq(struct kvm_vcpu *vcpu, int irq) { - return !vgic_irq_is_queued(vcpu, irq); + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); + bool shared_hw = map && !map->shared; + + return !vgic_irq_is_queued(vcpu, irq) || + (shared_hw && vgic_dist_irq_is_pending(vcpu, irq)); } /** @@ -1150,19 +1154,26 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, * active in the physical world. Otherwise the * physical interrupt will fire and the guest will * exit before processing the virtual interrupt. + * + * This is of course only valid for a shared + * interrupt. A non shared interrupt should already be + * active. */ if (map) { - int ret; - - BUG_ON(!map->active); vlr.hwirq = map->phys_irq; vlr.state |= LR_HW; vlr.state &= ~LR_EOI_INT; - ret = irq_set_irqchip_state(map->irq, - IRQCHIP_STATE_ACTIVE, - true); - WARN_ON(ret); + if (map->shared) { + int ret; + + BUG_ON(!map->active); + ret = irq_set_irqchip_state( + map->irq, + IRQCHIP_STATE_ACTIVE, + true); + WARN_ON(ret); + } /* * Make sure we're not going to sample this @@ -1229,10 +1240,13 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq) { + struct irq_phys_map *map = vgic_irq_map_search(vcpu, irq); + bool shared_hw = map && !map->shared; + if (!vgic_can_sample_irq(vcpu, irq)) return true; /* level interrupt, already queued */ - if (vgic_queue_irq(vcpu, 0, irq)) { + if (vgic_queue_irq(vcpu, 0, irq) || shared_hw) { if (vgic_irq_is_edge(vcpu, irq)) { vgic_dist_irq_clear_pending(vcpu, irq); vgic_cpu_irq_clear(vcpu, irq); @@ -1411,7 +1425,12 @@ static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr) return 0; map = vgic_irq_map_search(vcpu, vlr.irq); - BUG_ON(!map || !map->active); + BUG_ON(!map); + + if (!map->shared) + return 0; + + BUG_ON(map->shared && !map->active); ret = irq_get_irqchip_state(map->irq, IRQCHIP_STATE_ACTIVE, @@ -1563,6 +1582,7 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, int edge_triggered, level_triggered; int enabled; bool ret = true, can_inject = true; + bool shared_hw = map && !map->shared; if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020)) return -EINVAL; @@ -1573,7 +1593,8 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid, edge_triggered = vgic_irq_is_edge(vcpu, irq_num); level_triggered = !edge_triggered; - if (!vgic_validate_injection(vcpu, irq_num, level)) { + if (!vgic_validate_injection(vcpu, irq_num, level) && + !shared_hw) { ret = false; goto out; } @@ -1742,16 +1763,21 @@ static struct list_head *vgic_get_irq_phys_map_list(struct kvm_vcpu *vcpu, * @vcpu: The VCPU pointer * @virt_irq: The virtual irq number * @irq: The Linux IRQ number + * @shared: Indicates if the interrupt has to be context-switched or + * if it is private to a VM * * Establish a mapping between a guest visible irq (@virt_irq) and a * Linux irq (@irq). On injection, @virt_irq will be associated with * the physical interrupt represented by @irq. This mapping can be * established multiple times as long as the parameters are the same. + * If @shared is true, the active state of the interrupt will be + * context-switched. * * Returns a valid pointer on success, and an error pointer otherwise */ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, - int virt_irq, int irq) + int virt_irq, int irq, + bool shared) { struct vgic_dist *dist = &vcpu->kvm->arch.vgic; struct list_head *root = vgic_get_irq_phys_map_list(vcpu, virt_irq); @@ -1785,7 +1811,8 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, if (map) { /* Make sure this mapping matches */ if (map->phys_irq != phys_irq || - map->irq != irq) + map->irq != irq || + map->shared != shared) map = ERR_PTR(-EINVAL); /* Found an existing, valid mapping */ @@ -1796,6 +1823,7 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, map->virt_irq = virt_irq; map->phys_irq = phys_irq; map->irq = irq; + map->shared = shared; list_add_tail_rcu(&entry->entry, root); @@ -1846,7 +1874,7 @@ static void vgic_free_phys_irq_map_rcu(struct rcu_head *rcu) */ bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) { - BUG_ON(!map); + BUG_ON(!map || !map->shared); return map->active; } @@ -1858,7 +1886,7 @@ bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map) */ void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active) { - BUG_ON(!map); + BUG_ON(!map || !map->shared); map->active = active; }