| Message ID | 1438681069-16981-1-git-send-email-josh.wu@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Josh, Thank you for the patch. On Tuesday 04 August 2015 17:37:49 Josh Wu wrote: > This patch will get the DT parameters of vsync/hsync/pixclock polarity, and > pass to driver. > > Also add a debug information for test purpose. > > Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > > Changes in v3: > - add embedded sync dt property support. > > Changes in v2: > - rewrite the debug message and add pix clock polarity setup thanks to > Laurent. > - update the commit log. > > drivers/media/platform/soc_camera/atmel-isi.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > b/drivers/media/platform/soc_camera/atmel-isi.c index fead841..4efc939 > 100644 > --- a/drivers/media/platform/soc_camera/atmel-isi.c > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > @@ -1061,6 +1061,11 @@ static int isi_camera_set_bus_param(struct > soc_camera_device *icd) if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) > cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; > > + dev_dbg(icd->parent, "vsync active %s, hsync active %s, sampling on pix > clock %s edge\n", + common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : > "high", > + common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high", > + common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "falling" : "rising"); > + > if (isi->pdata.has_emb_sync) > cfg1 |= ISI_CFG1_EMB_SYNC; > if (isi->pdata.full_mode) > @@ -1148,6 +1153,16 @@ static int atmel_isi_parse_dt(struct atmel_isi *isi, > return -EINVAL; > } > > + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) > + isi->pdata.hsync_act_low = true; > + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) > + isi->pdata.vsync_act_low = true; > + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) > + isi->pdata.pclk_act_falling = true; > + > + if (ep.bus_type == V4L2_MBUS_BT656) > + isi->pdata.has_emb_sync = true; > + > return 0; > }
Le 04/08/2015 13:22, Laurent Pinchart a écrit : > Hi Josh, > > Thank you for the patch. > > On Tuesday 04 August 2015 17:37:49 Josh Wu wrote: >> This patch will get the DT parameters of vsync/hsync/pixclock polarity, and >> pass to driver. >> >> Also add a debug information for test purpose. >> >> Signed-off-by: Josh Wu <josh.wu@atmel.com> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Guennadi, Mauro, I don't see this patch in Linux-next and I'm not so used to http://git.linuxtv.org but didn't find it either. Well in fact it's just a lengthy version of "ping" ;-) Bye, >> --- >> >> Changes in v3: >> - add embedded sync dt property support. >> >> Changes in v2: >> - rewrite the debug message and add pix clock polarity setup thanks to >> Laurent. >> - update the commit log. >> >> drivers/media/platform/soc_camera/atmel-isi.c | 15 +++++++++++++++ >> 1 file changed, 15 insertions(+) >> >> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c >> b/drivers/media/platform/soc_camera/atmel-isi.c index fead841..4efc939 >> 100644 >> --- a/drivers/media/platform/soc_camera/atmel-isi.c >> +++ b/drivers/media/platform/soc_camera/atmel-isi.c >> @@ -1061,6 +1061,11 @@ static int isi_camera_set_bus_param(struct >> soc_camera_device *icd) if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) >> cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; >> >> + dev_dbg(icd->parent, "vsync active %s, hsync active %s, sampling on pix >> clock %s edge\n", + common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : >> "high", >> + common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high", >> + common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "falling" : "rising"); >> + >> if (isi->pdata.has_emb_sync) >> cfg1 |= ISI_CFG1_EMB_SYNC; >> if (isi->pdata.full_mode) >> @@ -1148,6 +1153,16 @@ static int atmel_isi_parse_dt(struct atmel_isi *isi, >> return -EINVAL; >> } >> >> + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) >> + isi->pdata.hsync_act_low = true; >> + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) >> + isi->pdata.vsync_act_low = true; >> + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) >> + isi->pdata.pclk_act_falling = true; >> + >> + if (ep.bus_type == V4L2_MBUS_BT656) >> + isi->pdata.has_emb_sync = true; >> + >> return 0; >> } >
Hi Nicolas, Patch handling is on my todo for the coming weekend... Thanks Guennadi On Fri, 18 Sep 2015, Nicolas Ferre wrote: > Le 04/08/2015 13:22, Laurent Pinchart a écrit : > > Hi Josh, > > > > Thank you for the patch. > > > > On Tuesday 04 August 2015 17:37:49 Josh Wu wrote: > >> This patch will get the DT parameters of vsync/hsync/pixclock polarity, and > >> pass to driver. > >> > >> Also add a debug information for test purpose. > >> > >> Signed-off-by: Josh Wu <josh.wu@atmel.com> > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Guennadi, Mauro, > > I don't see this patch in Linux-next and I'm not so used to > http://git.linuxtv.org but didn't find it either. > > Well in fact it's just a lengthy version of "ping" ;-) > > Bye, > > >> --- > >> > >> Changes in v3: > >> - add embedded sync dt property support. > >> > >> Changes in v2: > >> - rewrite the debug message and add pix clock polarity setup thanks to > >> Laurent. > >> - update the commit log. > >> > >> drivers/media/platform/soc_camera/atmel-isi.c | 15 +++++++++++++++ > >> 1 file changed, 15 insertions(+) > >> > >> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > >> b/drivers/media/platform/soc_camera/atmel-isi.c index fead841..4efc939 > >> 100644 > >> --- a/drivers/media/platform/soc_camera/atmel-isi.c > >> +++ b/drivers/media/platform/soc_camera/atmel-isi.c > >> @@ -1061,6 +1061,11 @@ static int isi_camera_set_bus_param(struct > >> soc_camera_device *icd) if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) > >> cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; > >> > >> + dev_dbg(icd->parent, "vsync active %s, hsync active %s, sampling on pix > >> clock %s edge\n", + common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : > >> "high", > >> + common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high", > >> + common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "falling" : "rising"); > >> + > >> if (isi->pdata.has_emb_sync) > >> cfg1 |= ISI_CFG1_EMB_SYNC; > >> if (isi->pdata.full_mode) > >> @@ -1148,6 +1153,16 @@ static int atmel_isi_parse_dt(struct atmel_isi *isi, > >> return -EINVAL; > >> } > >> > >> + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) > >> + isi->pdata.hsync_act_low = true; > >> + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) > >> + isi->pdata.vsync_act_low = true; > >> + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) > >> + isi->pdata.pclk_act_falling = true; > >> + > >> + if (ep.bus_type == V4L2_MBUS_BT656) > >> + isi->pdata.has_emb_sync = true; > >> + > >> return 0; > >> } > > > > > -- > Nicolas Ferre > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Guennadi On 9/18/2015 5:44 PM, Guennadi Liakhovetski wrote: > Hi Nicolas, > > Patch handling is on my todo for the coming weekend... Beside this patch, Atmel-isi still have server other patches in the patchwork for a long time. So some patch may need to rebase. Just for your convenience I create a branch here: https://github.com/JoshWu/linux-at91/commits/atmel-isi-v4.3, which collected all the Atmel-isi patches that still not merged. You can take it as a reference. Of cause, if you want I can sent out a pull request for it. thanks. Best Regards, Josh Wu > > Thanks > Guennadi > > On Fri, 18 Sep 2015, Nicolas Ferre wrote: > >> Le 04/08/2015 13:22, Laurent Pinchart a écrit : >>> Hi Josh, >>> >>> Thank you for the patch. >>> >>> On Tuesday 04 August 2015 17:37:49 Josh Wu wrote: >>>> This patch will get the DT parameters of vsync/hsync/pixclock polarity, and >>>> pass to driver. >>>> >>>> Also add a debug information for test purpose. >>>> >>>> Signed-off-by: Josh Wu <josh.wu@atmel.com> >>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> Guennadi, Mauro, >> >> I don't see this patch in Linux-next and I'm not so used to >> http://git.linuxtv.org but didn't find it either. >> >> Well in fact it's just a lengthy version of "ping" ;-) >> >> Bye, >> >>>> --- >>>> >>>> Changes in v3: >>>> - add embedded sync dt property support. >>>> >>>> Changes in v2: >>>> - rewrite the debug message and add pix clock polarity setup thanks to >>>> Laurent. >>>> - update the commit log. >>>> >>>> drivers/media/platform/soc_camera/atmel-isi.c | 15 +++++++++++++++ >>>> 1 file changed, 15 insertions(+) >>>> >>>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c >>>> b/drivers/media/platform/soc_camera/atmel-isi.c index fead841..4efc939 >>>> 100644 >>>> --- a/drivers/media/platform/soc_camera/atmel-isi.c >>>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c >>>> @@ -1061,6 +1061,11 @@ static int isi_camera_set_bus_param(struct >>>> soc_camera_device *icd) if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) >>>> cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; >>>> >>>> + dev_dbg(icd->parent, "vsync active %s, hsync active %s, sampling on pix >>>> clock %s edge\n", + common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : >>>> "high", >>>> + common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high", >>>> + common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "falling" : "rising"); >>>> + >>>> if (isi->pdata.has_emb_sync) >>>> cfg1 |= ISI_CFG1_EMB_SYNC; >>>> if (isi->pdata.full_mode) >>>> @@ -1148,6 +1153,16 @@ static int atmel_isi_parse_dt(struct atmel_isi *isi, >>>> return -EINVAL; >>>> } >>>> >>>> + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) >>>> + isi->pdata.hsync_act_low = true; >>>> + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) >>>> + isi->pdata.vsync_act_low = true; >>>> + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) >>>> + isi->pdata.pclk_act_falling = true; >>>> + >>>> + if (ep.bus_type == V4L2_MBUS_BT656) >>>> + isi->pdata.has_emb_sync = true; >>>> + >>>> return 0; >>>> } >> >> -- >> Nicolas Ferre >> -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Josh, On Fri, 18 Sep 2015, Josh Wu wrote: > Hi, Guennadi > > On 9/18/2015 5:44 PM, Guennadi Liakhovetski wrote: > > Hi Nicolas, > > > > Patch handling is on my todo for the coming weekend... > > Beside this patch, Atmel-isi still have server other patches in the patchwork > for a long time. So some patch may need to rebase. > > Just for your convenience I create a branch here: > https://github.com/JoshWu/linux-at91/commits/atmel-isi-v4.3, Thanks, that will help! > which collected all the Atmel-isi patches that still not merged. You can take > it as a reference. > > Of cause, if you want I can sent out a pull request for it. thanks. No need, the branch info above should be enough. Thanks Guennadi > > Best Regards, > Josh Wu > > > > Thanks > > Guennadi > > > > On Fri, 18 Sep 2015, Nicolas Ferre wrote: > > > > > Le 04/08/2015 13:22, Laurent Pinchart a écrit : > > > > Hi Josh, > > > > > > > > Thank you for the patch. > > > > > > > > On Tuesday 04 August 2015 17:37:49 Josh Wu wrote: > > > > > This patch will get the DT parameters of vsync/hsync/pixclock > > > > > polarity, and > > > > > pass to driver. > > > > > > > > > > Also add a debug information for test purpose. > > > > > > > > > > Signed-off-by: Josh Wu <josh.wu@atmel.com> > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > Guennadi, Mauro, > > > > > > I don't see this patch in Linux-next and I'm not so used to > > > http://git.linuxtv.org but didn't find it either. > > > > > > Well in fact it's just a lengthy version of "ping" ;-) > > > > > > Bye, > > > > > > > > --- > > > > > > > > > > Changes in v3: > > > > > - add embedded sync dt property support. > > > > > > > > > > Changes in v2: > > > > > - rewrite the debug message and add pix clock polarity setup thanks to > > > > > Laurent. > > > > > - update the commit log. > > > > > > > > > > drivers/media/platform/soc_camera/atmel-isi.c | 15 +++++++++++++++ > > > > > 1 file changed, 15 insertions(+) > > > > > > > > > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > > > > > b/drivers/media/platform/soc_camera/atmel-isi.c index fead841..4efc939 > > > > > 100644 > > > > > --- a/drivers/media/platform/soc_camera/atmel-isi.c > > > > > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > > > > > @@ -1061,6 +1061,11 @@ static int isi_camera_set_bus_param(struct > > > > > soc_camera_device *icd) if (common_flags & > > > > > V4L2_MBUS_PCLK_SAMPLE_FALLING) > > > > > cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; > > > > > > > > > > + dev_dbg(icd->parent, "vsync active %s, hsync active %s, > > > > > sampling on pix > > > > > clock %s edge\n", + common_flags & > > > > > V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : > > > > > "high", > > > > > + common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : > > > > > "high", > > > > > + common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? > > > > > "falling" : "rising"); > > > > > + > > > > > if (isi->pdata.has_emb_sync) > > > > > cfg1 |= ISI_CFG1_EMB_SYNC; > > > > > if (isi->pdata.full_mode) > > > > > @@ -1148,6 +1153,16 @@ static int atmel_isi_parse_dt(struct atmel_isi > > > > > *isi, > > > > > return -EINVAL; > > > > > } > > > > > > > > > > + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) > > > > > + isi->pdata.hsync_act_low = true; > > > > > + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) > > > > > + isi->pdata.vsync_act_low = true; > > > > > + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) > > > > > + isi->pdata.pclk_act_falling = true; > > > > > + > > > > > + if (ep.bus_type == V4L2_MBUS_BT656) > > > > > + isi->pdata.has_emb_sync = true; > > > > > + > > > > > return 0; > > > > > } > > > > > > -- > > > Nicolas Ferre > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index fead841..4efc939 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -1061,6 +1061,11 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; + dev_dbg(icd->parent, "vsync active %s, hsync active %s, sampling on pix clock %s edge\n", + common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : "high", + common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high", + common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "falling" : "rising"); + if (isi->pdata.has_emb_sync) cfg1 |= ISI_CFG1_EMB_SYNC; if (isi->pdata.full_mode) @@ -1148,6 +1153,16 @@ static int atmel_isi_parse_dt(struct atmel_isi *isi, return -EINVAL; } + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + isi->pdata.hsync_act_low = true; + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + isi->pdata.vsync_act_low = true; + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) + isi->pdata.pclk_act_falling = true; + + if (ep.bus_type == V4L2_MBUS_BT656) + isi->pdata.has_emb_sync = true; + return 0; }
This patch will get the DT parameters of vsync/hsync/pixclock polarity, and pass to driver. Also add a debug information for test purpose. Signed-off-by: Josh Wu <josh.wu@atmel.com> --- Changes in v3: - add embedded sync dt property support. Changes in v2: - rewrite the debug message and add pix clock polarity setup thanks to Laurent. - update the commit log. drivers/media/platform/soc_camera/atmel-isi.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)