diff mbox

[4/4] ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner

Message ID 1442936337-3104-5-git-send-email-vishnupatekar0510@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

vishnupatekar Sept. 22, 2015, 3:38 p.m. UTC 
H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner.
It has UART, ethernet, USB, HDMI, etc ports on it.

It's name is confusing, Its A83T board however,"H8_HOMLET_PROTO_V2"
printed on board.

A83T patches are tested on this board.
It has UART, ethernet, USB, HDMI, etc ports on it.

For FEL mode it needs USB A-A(Male) cable. I used uart0 which
is multiplexed to microsd pins PF2 and PF4.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 arch/arm/boot/dts/Makefile                         |  5 +-
 .../boot/dts/sun8i-a83t-allwinner-homlet-v20.dts   | 69 ++++++++++++++++++++++
 2 files changed, 72 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts

Comments

Maxime Ripard Sept. 22, 2015, 4 p.m. UTC | #1 
On Tue, Sep 22, 2015 at 11:38:57PM +0800, Vishnu Patekar wrote:
> H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner.
> It has UART, ethernet, USB, HDMI, etc ports on it.
> 
> It's name is confusing, Its A83T board however,"H8_HOMLET_PROTO_V2"
> printed on board.
> 
> A83T patches are tested on this board.
> It has UART, ethernet, USB, HDMI, etc ports on it.
> 
> For FEL mode it needs USB A-A(Male) cable. I used uart0 which
> is multiplexed to microsd pins PF2 and PF4.

Is there no other UART on the device?

> 
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile                         |  5 +-
>  .../boot/dts/sun8i-a83t-allwinner-homlet-v20.dts   | 69 ++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b276174..9585a58 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -634,7 +634,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>  	sun8i-a33-ga10h-v1.1.dtb \
>  	sun8i-a33-ippo-q8h-v1.2.dtb \
>  	sun8i-a33-q8-tzx-723q4.dtb \
> -	sun8i-a33-sinlinx-sina33.dtb
> +	sun8i-a33-sinlinx-sina33.dtb \
> +	sun8i-a83t-allwinner-homlet-v20.dtb

we probably want to mention the h8 in here too, and the v2 is enough.

>  dtb-$(CONFIG_MACH_SUN9I) += \
>  	sun9i-a80-optimus.dtb \
>  	sun9i-a80-cubieboard4.dtb
> @@ -679,7 +680,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
>  	uniphier-ph1-ld6b-ref.dtb \
>  	uniphier-ph1-pro4-ref.dtb \
>  	uniphier-ph1-sld3-ref.dtb \
> -	uniphier-ph1-sld8-ref.dtb 
> +	uniphier-ph1-sld8-ref.dtb

Uh ?

>  dtb-$(CONFIG_ARCH_VERSATILE) += \
>  	versatile-ab.dtb \
>  	versatile-pb.dtb
> diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
> new file mode 100644
> index 0000000..bbc2ab9
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
> @@ -0,0 +1,69 @@
> +/*
> + * Copyright 2015 Vishnu Patekar
> + * Vishnu Patekar <vishnupatekar0510@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun8i-a83t.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>

Do you need those headers?

> +
> +/ {
> +	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
> +	compatible = "allwinner,homletv2", "allwinner,sun8i-a83t";

                                ^ Please add a dash here

> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +		bootargs = "earlyprintk console=ttyS0,115200";

console is useless here, and please remove earlyprintk. It will make
your kernel crash if the image is configured for another SoC.

> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins_a>;
> +	status = "okay";
> +};
> -- 
> 1.9.1
> 

Thanks!
Maxime
vishnupatekar Sept. 22, 2015, 4:21 p.m. UTC | #2 
Hello,


On Wed, Sep 23, 2015 at 12:00 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
>
> On Tue, Sep 22, 2015 at 11:38:57PM +0800, Vishnu Patekar wrote:
> > H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner.
> > It has UART, ethernet, USB, HDMI, etc ports on it.
> >
> > It's name is confusing, Its A83T board however,"H8_HOMLET_PROTO_V2"
> > printed on board.
> >
> > A83T patches are tested on this board.
> > It has UART, ethernet, USB, HDMI, etc ports on it.
> >
> > For FEL mode it needs USB A-A(Male) cable. I used uart0 which
> > is multiplexed to microsd pins PF2 and PF4.
>
> Is there no other UART on the device?
There is other UART port. I've not yet verify it.
Well, to put this device into FEL mode we need to press '2' on UART0.
So, I had to use uart0 multiplexed with uart0.

I doubt whether we can use other uart connector to put device into FEL mode.
>
> >
> > Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
> > ---
> >  arch/arm/boot/dts/Makefile                         |  5 +-
> >  .../boot/dts/sun8i-a83t-allwinner-homlet-v20.dts   | 69 ++++++++++++++++++++++
> >  2 files changed, 72 insertions(+), 2 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index b276174..9585a58 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -634,7 +634,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> >       sun8i-a33-ga10h-v1.1.dtb \
> >       sun8i-a33-ippo-q8h-v1.2.dtb \
> >       sun8i-a33-q8-tzx-723q4.dtb \
> > -     sun8i-a33-sinlinx-sina33.dtb
> > +     sun8i-a33-sinlinx-sina33.dtb \
> > +     sun8i-a83t-allwinner-homlet-v20.dtb
>
> we probably want to mention the h8 in here too, and the v2 is enough.
>
> >  dtb-$(CONFIG_MACH_SUN9I) += \
> >       sun9i-a80-optimus.dtb \
> >       sun9i-a80-cubieboard4.dtb
> > @@ -679,7 +680,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
> >       uniphier-ph1-ld6b-ref.dtb \
> >       uniphier-ph1-pro4-ref.dtb \
> >       uniphier-ph1-sld3-ref.dtb \
> > -     uniphier-ph1-sld8-ref.dtb
> > +     uniphier-ph1-sld8-ref.dtb
>
> Uh ?
I just fixed a white space error here, sorry, forgot to mention in commit log.
>
> >  dtb-$(CONFIG_ARCH_VERSATILE) += \
> >       versatile-ab.dtb \
> >       versatile-pb.dtb
> > diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
> > new file mode 100644
> > index 0000000..bbc2ab9
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
> > @@ -0,0 +1,69 @@
> > +/*
> > + * Copyright 2015 Vishnu Patekar
> > + * Vishnu Patekar <vishnupatekar0510@gmail.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + *  a) This file is free software; you can redistribute it and/or
> > + *     modify it under the terms of the GNU General Public License as
> > + *     published by the Free Software Foundation; either version 2 of the
> > + *     License, or (at your option) any later version.
> > + *
> > + *     This file is distributed in the hope that it will be useful,
> > + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + *     GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + *  b) Permission is hereby granted, free of charge, to any person
> > + *     obtaining a copy of this software and associated documentation
> > + *     files (the "Software"), to deal in the Software without
> > + *     restriction, including without limitation the rights to use,
> > + *     copy, modify, merge, publish, distribute, sublicense, and/or
> > + *     sell copies of the Software, and to permit persons to whom the
> > + *     Software is furnished to do so, subject to the following
> > + *     conditions:
> > + *
> > + *     The above copyright notice and this permission notice shall be
> > + *     included in all copies or substantial portions of the Software.
> > + *
> > + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + *     OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include "sun8i-a83t.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pinctrl/sun4i-a10.h>
>
> Do you need those headers?
I'll verify.
>
> > +
> > +/ {
> > +     model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
> > +     compatible = "allwinner,homletv2", "allwinner,sun8i-a83t";
>
>                                 ^ Please add a dash here
>
> > +
> > +     aliases {
> > +             serial0 = &uart0;
> > +     };
> > +
> > +     chosen {
> > +             stdout-path = "serial0:115200n8";
> > +             bootargs = "earlyprintk console=ttyS0,115200";
>
> console is useless here, and please remove earlyprintk. It will make
> your kernel crash if the image is configured for another SoC.
>
Okie.
> > +     };
> > +};
> > +
> > +&uart0 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&uart0_pins_a>;
> > +     status = "okay";
> > +};
> > --
> > 1.9.1
> >
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b276174..9585a58 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -634,7 +634,8 @@  dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-q8-tzx-723q4.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a83t-allwinner-homlet-v20.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
@@ -679,7 +680,7 @@  dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ph1-ld6b-ref.dtb \
 	uniphier-ph1-pro4-ref.dtb \
 	uniphier-ph1-sld3-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb 
+	uniphier-ph1-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
new file mode 100644
index 0000000..bbc2ab9
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-homlet-v20.dts
@@ -0,0 +1,69 @@ 
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,homletv2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};