| Message ID | 1443215162-13716-2-git-send-email-aalonso@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Sep 25, 2015 at 04:05:58PM -0500, Adrian Alonso wrote: > Add imx7d-sdb iomuxc-lpsr hoggrp-2 default pads settings > > Signed-off-by: Adrian Alonso <aalonso@freescale.com> Looked at this patch again, and please see comments below. > --- > Changes for V2: Resend > Changes for V3: Resend > Changes for V4: Resend > Changes for V5: Resend > Changes for V6: > - Add wdog pinctrl group, add comments for hog2 group gpios > > arch/arm/boot/dts/imx7d-sdb.dts | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts > index 8059458..2da704a 100644 > --- a/arch/arm/boot/dts/imx7d-sdb.dts > +++ b/arch/arm/boot/dts/imx7d-sdb.dts > @@ -419,3 +419,23 @@ > > }; > }; > + > +&iomuxc_lpsr { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog_2>; > + > + imx7d-sdb { > + pinctrl_hog_2: hoggrp-2 { > + fsl,pins = < > + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* usb_otg1_pwr */ Shouldn't this be handled by a pinctrl of regulator@0 ... > + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /* sensor_int_b */ ... and this by a pinctrl of regulator@2? > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 > + >; > + }; Add this only when you have a user for it. Shawn > + }; > +}; > -- > 2.1.4 >
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 8059458..2da704a 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -419,3 +419,23 @@ }; }; + +&iomuxc_lpsr { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_2>; + + imx7d-sdb { + pinctrl_hog_2: hoggrp-2 { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* usb_otg1_pwr */ + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /* sensor_int_b */ + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; + }; +};
Add imx7d-sdb iomuxc-lpsr hoggrp-2 default pads settings Signed-off-by: Adrian Alonso <aalonso@freescale.com> --- Changes for V2: Resend Changes for V3: Resend Changes for V4: Resend Changes for V5: Resend Changes for V6: - Add wdog pinctrl group, add comments for hog2 group gpios arch/arm/boot/dts/imx7d-sdb.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)