| Message ID | 1442486244-1833-1-git-send-email-zhengxing@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Donnerstag, 17. September 2015, 18:37:24 schrieb Xing Zheng: > The timer5 supplies the architected timer and thus as has to run when > the system clocksource and clockevents drivers are registered. please kindly ask the people doing uboot development to do this in uboot itself in future socs :-) - for example Simon's rk3288 mainline uboot does this correctly. > > Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> > --- > > Changes in v2: None > > arch/arm/mach-rockchip/rockchip.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/arch/arm/mach-rockchip/rockchip.c > b/arch/arm/mach-rockchip/rockchip.c index b6cf3b4..937047f 100644 > --- a/arch/arm/mach-rockchip/rockchip.c > +++ b/arch/arm/mach-rockchip/rockchip.c > @@ -32,6 +32,8 @@ > #define RK3288_GRF_SOC_CON0 0x244 > #define RK3288_TIMER6_7_PHYS 0xff810000 > > +#define RK3036_TIMER5_PHYS 0x200440a0 > + #define RK3036_TIMER_PHYS 0x20044000 --> the actual base address of the timer block As it looks like that we'll need to duplicate that timer init at least for the rk3036 and the timer ip in question is actually the same on both, please split out the actual work into a separate function like static void rockchip_init_arch_timer_supply(resource_size_t phys, int offs) { reg_base = ioremap(phys, SZ_16K); if (reg_base) { writel(0, reg_base + offs + 0x10); writel(0xffffffff, reg_base + offs); writel(0xffffffff, reg_base + offs + 0x04); writel(1, reg_base + offs + 0x10); dsb(); iounmap(reg_base); } else { pr_err("rockchip: could not map timer registers\n"); } } > static void __init rockchip_timer_init(void) > { > if (of_machine_is_compatible("rockchip,rk3288")) { > @@ -64,6 +66,25 @@ static void __init rockchip_timer_init(void) for the rk3288 exchange the timer init against rockchip_init_arch_timer_supply(RK3288_TIMER6_7_PHYS, 0x20); > regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); > else > pr_err("rockchip: could not get grf syscon\n"); > + } else if (of_machine_is_compatible("rockchip,rk3036")) { > + void __iomem *reg_base; > + > + /* > + * Most/all uboot versions for rk3036 don't enable timer5 > + * which is needed for the architected timer to work. > + * So make sure it is running during early boot. > + */ > + reg_base = ioremap(RK3036_TIMER5_PHYS, SZ_16K); > + if (reg_base) { > + writel(0, reg_base + 0x10); > + writel(0xffffffff, reg_base); > + writel(0xffffffff, reg_base + 0x04); > + writel(1, reg_base + 0x10); > + dsb(); > + iounmap(reg_base); > + } else { > + pr_err("rockchip: could not map timer5 registers\n"); > + } rockchip_init_arch_timer_supply(RK3036_TIMER_PHYS, 0xa0); > } > > of_clk_init(NULL); > @@ -79,6 +100,7 @@ static void __init rockchip_dt_init(void) > > static const char * const rockchip_board_dt_compat[] = { > "rockchip,rk2928", > + "rockchip,rk3036", > "rockchip,rk3066a", > "rockchip,rk3066b", > "rockchip,rk3188",
On 2015?09?17? 23:05, Heiko Stübner wrote: > Am Donnerstag, 17. September 2015, 18:37:24 schrieb Xing Zheng: >> The timer5 supplies the architected timer and thus as has to run when >> the system clocksource and clockevents drivers are registered. > please kindly ask the people doing uboot development to do this in uboot > itself in future socs :-) - for example Simon's rk3288 mainline uboot does > this correctly. OK, I will ask the engineer who is doing uboot whether needs to add this patch. So I will remove it from the patchset v3 of "Build and support rk3036 SoC platform". Thanks. >> Signed-off-by: Xing Zheng<zhengxing@rock-chips.com> >> --- >> >> Changes in v2: None >> >> arch/arm/mach-rockchip/rockchip.c | 22 ++++++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> >> diff --git a/arch/arm/mach-rockchip/rockchip.c >> b/arch/arm/mach-rockchip/rockchip.c index b6cf3b4..937047f 100644 >> --- a/arch/arm/mach-rockchip/rockchip.c >> +++ b/arch/arm/mach-rockchip/rockchip.c >> @@ -32,6 +32,8 @@ >> #define RK3288_GRF_SOC_CON0 0x244 >> #define RK3288_TIMER6_7_PHYS 0xff810000 >> >> +#define RK3036_TIMER5_PHYS 0x200440a0 >> + > #define RK3036_TIMER_PHYS 0x20044000 > --> the actual base address of the timer block > > As it looks like that we'll need to duplicate that timer init at least for the > rk3036 and the timer ip in question is actually the same on both, please split > out the actual work into a separate function like > > static void rockchip_init_arch_timer_supply(resource_size_t phys, int offs) > { > reg_base = ioremap(phys, SZ_16K); > if (reg_base) { > writel(0, reg_base + offs + 0x10); > writel(0xffffffff, reg_base + offs); > writel(0xffffffff, reg_base + offs + 0x04); > writel(1, reg_base + offs + 0x10); > dsb(); > iounmap(reg_base); > } else { > pr_err("rockchip: could not map timer registers\n"); > } > } Done. > >> static void __init rockchip_timer_init(void) >> { >> if (of_machine_is_compatible("rockchip,rk3288")) { >> @@ -64,6 +66,25 @@ static void __init rockchip_timer_init(void) > for the rk3288 exchange the timer init against > rockchip_init_arch_timer_supply(RK3288_TIMER6_7_PHYS, 0x20); Done. >> regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); >> else >> pr_err("rockchip: could not get grf syscon\n"); >> + } else if (of_machine_is_compatible("rockchip,rk3036")) { >> + void __iomem *reg_base; >> + >> + /* >> + * Most/all uboot versions for rk3036 don't enable timer5 >> + * which is needed for the architected timer to work. >> + * So make sure it is running during early boot. >> + */ >> + reg_base = ioremap(RK3036_TIMER5_PHYS, SZ_16K); >> + if (reg_base) { >> + writel(0, reg_base + 0x10); >> + writel(0xffffffff, reg_base); >> + writel(0xffffffff, reg_base + 0x04); >> + writel(1, reg_base + 0x10); >> + dsb(); >> + iounmap(reg_base); >> + } else { >> + pr_err("rockchip: could not map timer5 registers\n"); >> + } > rockchip_init_arch_timer_supply(RK3036_TIMER_PHYS, 0xa0); Done. >> } >> >> of_clk_init(NULL); >> @@ -79,6 +100,7 @@ static void __init rockchip_dt_init(void) >> >> static const char * const rockchip_board_dt_compat[] = { >> "rockchip,rk2928", >> + "rockchip,rk3036", >> "rockchip,rk3066a", >> "rockchip,rk3066b", >> "rockchip,rk3188", >
Hi, Am Montag, 28. September 2015, 20:25:07 schrieb Xing Zheng: > On 2015?09?17? 23:05, Heiko Stübner wrote: > > Am Donnerstag, 17. September 2015, 18:37:24 schrieb Xing Zheng: > >> The timer5 supplies the architected timer and thus as has to run when > >> the system clocksource and clockevents drivers are registered. > > > > please kindly ask the people doing uboot development to do this in uboot > > itself in future socs :-) - for example Simon's rk3288 mainline uboot does > > this correctly. > > OK, I will ask the engineer who is doing uboot whether needs to add > this patch. So I will remove it from the patchset v3 of "Build and support > rk3036 SoC platform". No, I really only meant try to make people get this right in the future :-). For the rk3036 there are probably already devices on the market with uboots sporting that issue. So it's ok to have this in here now, it's just to make sure it gets really fixed in future socs. Heiko > > Thanks. > > >> Signed-off-by: Xing Zheng<zhengxing@rock-chips.com> > >> --- > >> > >> Changes in v2: None > >> > >> arch/arm/mach-rockchip/rockchip.c | 22 ++++++++++++++++++++++ > >> 1 file changed, 22 insertions(+) > >> > >> diff --git a/arch/arm/mach-rockchip/rockchip.c > >> b/arch/arm/mach-rockchip/rockchip.c index b6cf3b4..937047f 100644 > >> --- a/arch/arm/mach-rockchip/rockchip.c > >> +++ b/arch/arm/mach-rockchip/rockchip.c > >> @@ -32,6 +32,8 @@ > >> > >> #define RK3288_GRF_SOC_CON0 0x244 > >> #define RK3288_TIMER6_7_PHYS 0xff810000 > >> > >> +#define RK3036_TIMER5_PHYS 0x200440a0 > >> + > > > > #define RK3036_TIMER_PHYS 0x20044000 > > --> the actual base address of the timer block > > > > As it looks like that we'll need to duplicate that timer init at least for > > the rk3036 and the timer ip in question is actually the same on both, > > please split out the actual work into a separate function like > > > > static void rockchip_init_arch_timer_supply(resource_size_t phys, int > > offs) > > { > > > > reg_base = ioremap(phys, SZ_16K); > > if (reg_base) { > > > > writel(0, reg_base + offs + 0x10); > > writel(0xffffffff, reg_base + offs); > > writel(0xffffffff, reg_base + offs + 0x04); > > writel(1, reg_base + offs + 0x10); > > dsb(); > > iounmap(reg_base); > > > > } else { > > > > pr_err("rockchip: could not map timer registers\n"); > > > > } > > > > } > > Done. > > >> static void __init rockchip_timer_init(void) > >> { > >> > >> if (of_machine_is_compatible("rockchip,rk3288")) { > >> > >> @@ -64,6 +66,25 @@ static void __init rockchip_timer_init(void) > > > > for the rk3288 exchange the timer init against > > rockchip_init_arch_timer_supply(RK3288_TIMER6_7_PHYS, 0x20); > > Done. > > >> regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); > >> > >> else > >> > >> pr_err("rockchip: could not get grf syscon\n"); > >> > >> + } else if (of_machine_is_compatible("rockchip,rk3036")) { > >> + void __iomem *reg_base; > >> + > >> + /* > >> + * Most/all uboot versions for rk3036 don't enable timer5 > >> + * which is needed for the architected timer to work. > >> + * So make sure it is running during early boot. > >> + */ > >> + reg_base = ioremap(RK3036_TIMER5_PHYS, SZ_16K); > >> + if (reg_base) { > >> + writel(0, reg_base + 0x10); > >> + writel(0xffffffff, reg_base); > >> + writel(0xffffffff, reg_base + 0x04); > >> + writel(1, reg_base + 0x10); > >> + dsb(); > >> + iounmap(reg_base); > >> + } else { > >> + pr_err("rockchip: could not map timer5 registers\n"); > >> + } > > > > rockchip_init_arch_timer_supply(RK3036_TIMER_PHYS, 0xa0); > > Done. > > >> } > >> > >> of_clk_init(NULL); > >> > >> @@ -79,6 +100,7 @@ static void __init rockchip_dt_init(void) > >> > >> static const char * const rockchip_board_dt_compat[] = { > >> > >> "rockchip,rk2928", > >> > >> + "rockchip,rk3036", > >> > >> "rockchip,rk3066a", > >> "rockchip,rk3066b", > >> "rockchip,rk3188",
On 2015?09?28? 20:44, Heiko Stübner wrote: > Hi, > > Am Montag, 28. September 2015, 20:25:07 schrieb Xing Zheng: >> On 2015?09?17? 23:05, Heiko Stübner wrote: >>> Am Donnerstag, 17. September 2015, 18:37:24 schrieb Xing Zheng: >>>> The timer5 supplies the architected timer and thus as has to run when >>>> the system clocksource and clockevents drivers are registered. >>> please kindly ask the people doing uboot development to do this in uboot >>> itself in future socs :-) - for example Simon's rk3288 mainline uboot does >>> this correctly. >> OK, I will ask the engineer who is doing uboot whether needs to add >> this patch. So I will remove it from the patchset v3 of "Build and support >> rk3036 SoC platform". > No, I really only meant try to make people get this right in the future :-). > > For the rk3036 there are probably already devices on the market with uboots > sporting that issue. So it's ok to have this in here now, it's just to make > sure it gets really fixed in future socs. > > > Heiko > > OK, I got it. Thank you. :)
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index b6cf3b4..937047f 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -32,6 +32,8 @@ #define RK3288_GRF_SOC_CON0 0x244 #define RK3288_TIMER6_7_PHYS 0xff810000 +#define RK3036_TIMER5_PHYS 0x200440a0 + static void __init rockchip_timer_init(void) { if (of_machine_is_compatible("rockchip,rk3288")) { @@ -64,6 +66,25 @@ static void __init rockchip_timer_init(void) regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); else pr_err("rockchip: could not get grf syscon\n"); + } else if (of_machine_is_compatible("rockchip,rk3036")) { + void __iomem *reg_base; + + /* + * Most/all uboot versions for rk3036 don't enable timer5 + * which is needed for the architected timer to work. + * So make sure it is running during early boot. + */ + reg_base = ioremap(RK3036_TIMER5_PHYS, SZ_16K); + if (reg_base) { + writel(0, reg_base + 0x10); + writel(0xffffffff, reg_base); + writel(0xffffffff, reg_base + 0x04); + writel(1, reg_base + 0x10); + dsb(); + iounmap(reg_base); + } else { + pr_err("rockchip: could not map timer5 registers\n"); + } } of_clk_init(NULL); @@ -79,6 +100,7 @@ static void __init rockchip_dt_init(void) static const char * const rockchip_board_dt_compat[] = { "rockchip,rk2928", + "rockchip,rk3036", "rockchip,rk3066a", "rockchip,rk3066b", "rockchip,rk3188",
The timer5 supplies the architected timer and thus as has to run when the system clocksource and clockevents drivers are registered. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> --- Changes in v2: None arch/arm/mach-rockchip/rockchip.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)