diff mbox

rtc: at91rm9200: clear RTC alarm status flag prior to suspending

Message ID 1444612677-26178-1-git-send-email-wenyou.yang@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Wenyou Yang Oct. 12, 2015, 1:17 a.m. UTC
This patch is to clear the RTC alarm status flag prior to suspending
to avoid the erroneous wake-up activity.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

 drivers/rtc/rtc-at91rm9200.c |    2 ++
 1 file changed, 2 insertions(+)

Comments

Alexandre Belloni Oct. 12, 2015, 6:53 a.m. UTC | #1
Hi Wenyou,

On 12/10/2015 at 09:17:57 +0800, Wenyou Yang wrote :
> This patch is to clear the RTC alarm status flag prior to suspending
> to avoid the erroneous wake-up activity.
> 

Is this a new issue appearing with the sama5d2 or was it present from
the beginning?

> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
> 
>  drivers/rtc/rtc-at91rm9200.c |    2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
> index cb62e21..b60fd47 100644
> --- a/drivers/rtc/rtc-at91rm9200.c
> +++ b/drivers/rtc/rtc-at91rm9200.c
> @@ -495,6 +495,8 @@ static int at91_rtc_suspend(struct device *dev)
>  	/* this IRQ is shared with DBGU and other hardware which isn't
>  	 * necessarily doing PM like we are...
>  	 */
> +	at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
> +
>  	at91_rtc_imr = at91_rtc_read_imr()
>  			& (AT91_RTC_ALARM|AT91_RTC_SECEV);
>  	if (at91_rtc_imr) {
> -- 
> 1.7.9.5
>
Wenyou Yang Oct. 12, 2015, 7:48 a.m. UTC | #2
Hi Alexandre,

> -----Original Message-----

> From: Alexandre Belloni [mailto:alexandre.belloni@free-electrons.com]

> Sent: 2015?10?12? 14:53

> To: Yang, Wenyou

> Cc: Alessandro Zummo; Ferre, Nicolas; Desroches, Ludovic; rtc-

> linux@googlegroups.com; linux-kernel@vger.kernel.org; linux-arm-

> kernel@lists.infradead.org

> Subject: Re: [PATCH] rtc: at91rm9200: clear RTC alarm status flag prior to

> suspending

> 

> Hi Wenyou,

> 

> On 12/10/2015 at 09:17:57 +0800, Wenyou Yang wrote :

> > This patch is to clear the RTC alarm status flag prior to suspending

> > to avoid the erroneous wake-up activity.

> >

> 

> Is this a new issue appearing with the sama5d2 or was it present from the

> beginning?

With the sama5d2 ULP1 mode, not from the beginning.

> 

> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>

> > ---

> >

> >  drivers/rtc/rtc-at91rm9200.c |    2 ++

> >  1 file changed, 2 insertions(+)

> >

> > diff --git a/drivers/rtc/rtc-at91rm9200.c

> > b/drivers/rtc/rtc-at91rm9200.c index cb62e21..b60fd47 100644

> > --- a/drivers/rtc/rtc-at91rm9200.c

> > +++ b/drivers/rtc/rtc-at91rm9200.c

> > @@ -495,6 +495,8 @@ static int at91_rtc_suspend(struct device *dev)

> >  	/* this IRQ is shared with DBGU and other hardware which isn't

> >  	 * necessarily doing PM like we are...

> >  	 */

> > +	at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);

> > +

> >  	at91_rtc_imr = at91_rtc_read_imr()

> >  			& (AT91_RTC_ALARM|AT91_RTC_SECEV);

> >  	if (at91_rtc_imr) {

> > --

> > 1.7.9.5

> >

> 

> --

> Alexandre Belloni, Free Electrons

> Embedded Linux, Kernel and Android engineering

> http://free-electrons.com


Best Regards,
Wenyou Yang
Alexandre Belloni Oct. 12, 2015, 7:51 a.m. UTC | #3
On 12/10/2015 at 07:48:18 +0000, Yang, Wenyou wrote :
> > On 12/10/2015 at 09:17:57 +0800, Wenyou Yang wrote :
> > > This patch is to clear the RTC alarm status flag prior to suspending
> > > to avoid the erroneous wake-up activity.
> > >
> > 
> > Is this a new issue appearing with the sama5d2 or was it present from the
> > beginning?
> With the sama5d2 ULP1 mode, not from the beginning.
> 

I think this information should appear in the commit log.
Wenyou Yang Oct. 12, 2015, 7:55 a.m. UTC | #4
> -----Original Message-----

> From: Alexandre Belloni [mailto:alexandre.belloni@free-electrons.com]

> Sent: 2015?10?12? 15:51

> To: Yang, Wenyou

> Cc: Alessandro Zummo; Ferre, Nicolas; Desroches, Ludovic; rtc-

> linux@googlegroups.com; linux-kernel@vger.kernel.org; linux-arm-

> kernel@lists.infradead.org

> Subject: Re: [PATCH] rtc: at91rm9200: clear RTC alarm status flag prior to

> suspending

> 

> On 12/10/2015 at 07:48:18 +0000, Yang, Wenyou wrote :

> > > On 12/10/2015 at 09:17:57 +0800, Wenyou Yang wrote :

> > > > This patch is to clear the RTC alarm status flag prior to

> > > > suspending to avoid the erroneous wake-up activity.

> > > >

> > >

> > > Is this a new issue appearing with the sama5d2 or was it present

> > > from the beginning?

> > With the sama5d2 ULP1 mode, not from the beginning.

> >

> 

> I think this information should appear in the commit log.

I will add it in the next version, thanks.

> 

> --

> Alexandre Belloni, Free Electrons

> Embedded Linux, Kernel and Android engineering http://free-electrons.com


Best Regards,
Wenyou Yang
diff mbox

Patch

diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index cb62e21..b60fd47 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -495,6 +495,8 @@  static int at91_rtc_suspend(struct device *dev)
 	/* this IRQ is shared with DBGU and other hardware which isn't
 	 * necessarily doing PM like we are...
 	 */
+	at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+
 	at91_rtc_imr = at91_rtc_read_imr()
 			& (AT91_RTC_ALARM|AT91_RTC_SECEV);
 	if (at91_rtc_imr) {