diff mbox

[v3,2/4] ARM: dts: sun5i: Add PWM channel 0 pinmux setting for A13/A10s

Message ID 1444557308-10892-2-git-send-email-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans de Goede Oct. 11, 2015, 9:55 a.m. UTC 
Add a pinmux setting for the first pwm channel. This is often used for
backlight dimming on tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun5i.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Maxime Ripard Oct. 12, 2015, 1:51 p.m. UTC | #1 
On Sun, Oct 11, 2015 at 11:55:06AM +0200, Hans de Goede wrote:
> Add a pinmux setting for the first pwm channel. This is often used for
> backlight dimming on tablets.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Applied, thanks!
Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 78b993a..8f54256 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -529,6 +529,13 @@ 
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
+
+			pwm0_pins: pwm0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {