| Message ID | 561C6713.1070508@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Jaehoon Chung, On 13 October 2015 at 07:36, Jaehoon Chung <jh80.chung@samsung.com> wrote: > Dear, Anand. > > > On 10/13/2015 09:12 AM, Krzysztof Kozlowski wrote: >> On 12.10.2015 23:47, Anand Moon wrote: >>>> >>>> Anand, >>>> >>>> You essentially reverted here af6ad88acbd6 ("ARM: dts: Mux XMMCnDATA[0] >>>> pad correctly for Exynos5420 boards"). Why? There is no explanation in >>>> the commit message about this. >>> >>> I don't remember to send the patch relevant to this. Hmm... >>> Well, Is this patch really signed-off by me? >>> >>> Best Regards, >>> >>> Jaehoon Chung >>>> >>>> Best regards, >>>> Krzysztof >>>> >>> >>>> >>> >>> >>> Some how I don't receive these mail on my email id. >>> >>> I have picked up these changes from tizen repository for OdroidXU3. >>> I have tested with this changes to detect UHS-I micro cd cards. >>> That's the reason for this email. > > It seems to make manually, right? > I have checked the tizen repository. > > The below is > > --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts > @@ -335,7 +335,9 @@ > samsung,dw-mshc-sdr-timing = <0 4>; > samsung,dw-mshc-ddr-timing = <0 2>; > pinctrl-names = "default"; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; > + cd-gpios = <&gpc2 2 0>; > + cd-inverted; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; > bus-width = <4>; > cap-sd-highspeed; > }; > > > > Yours > > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > @@ -352,8 +352,10 @@ > samsung,dw-mshc-ciu-div = <3>; > samsung,dw-mshc-sdr-timing = <0 4>; > samsung,dw-mshc-ddr-timing = <0 2>; > + cd-gpios = <&gpc2 2 GPIO_ACTIVE_HIGH>; > + cd-inverted; > pinctrl-names = "default"; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; > > Did you know what differ? :) > My mistake, I will drop the changes. Sorry for the whole mess. -Anand Moon > Best Regards, > Jaehoon Chung > >> >> ... and you applied it blindly without looking at actual existing >> contents and at previous commits. >> >> That is not how patches from different repositories should be cherry picked. >> >> Best regards, >> Krzysztof >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jaehoon, On 13 October 2015 at 07:36, Jaehoon Chung <jh80.chung@samsung.com> wrote: > Dear, Anand. > > > On 10/13/2015 09:12 AM, Krzysztof Kozlowski wrote: >> On 12.10.2015 23:47, Anand Moon wrote: >>>> >>>> Anand, >>>> >>>> You essentially reverted here af6ad88acbd6 ("ARM: dts: Mux XMMCnDATA[0] >>>> pad correctly for Exynos5420 boards"). Why? There is no explanation in >>>> the commit message about this. >>> >>> I don't remember to send the patch relevant to this. Hmm... >>> Well, Is this patch really signed-off by me? >>> >>> Best Regards, >>> >>> Jaehoon Chung >>>> >>>> Best regards, >>>> Krzysztof >>>> >>> >>>> >>> >>> >>> Some how I don't receive these mail on my email id. >>> >>> I have picked up these changes from tizen repository for OdroidXU3. >>> I have tested with this changes to detect UHS-I micro cd cards. >>> That's the reason for this email. > > It seems to make manually, right? > I have checked the tizen repository. > > The below is > > --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts > @@ -335,7 +335,9 @@ > samsung,dw-mshc-sdr-timing = <0 4>; > samsung,dw-mshc-ddr-timing = <0 2>; > pinctrl-names = "default"; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; > + cd-gpios = <&gpc2 2 0>; > + cd-inverted; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; > bus-width = <4>; > cap-sd-highspeed; > }; > > > > Yours > > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > @@ -352,8 +352,10 @@ > samsung,dw-mshc-ciu-div = <3>; > samsung,dw-mshc-sdr-timing = <0 4>; > samsung,dw-mshc-ddr-timing = <0 2>; > + cd-gpios = <&gpc2 2 GPIO_ACTIVE_HIGH>; > + cd-inverted; > pinctrl-names = "default"; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; > > Did you know what differ? :) > > Best Regards, > Jaehoon Chung > >> >> ... and you applied it blindly without looking at actual existing >> contents and at previous commits. >> >> That is not how patches from different repositories should be cherry picked. >> >> Best regards, >> Krzysztof >> >> > Looks like my changes have introduce another bug so please ignore this changes. -Anand Moon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -335,7 +335,9 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + cd-gpios = <&gpc2 2 0>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; }; Yours --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -352,8 +352,10 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + cd-gpios = <&gpc2 2 GPIO_ACTIVE_HIGH>; + cd-inverted; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; Did you know what differ? :)