| Message ID | 1444743164-17735-1-git-send-email-sudeep.holla@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
[cc linux-sh] On Tue, Oct 13, 2015 at 02:32:43PM +0100, Sudeep Holla wrote: > The keyboard driver for GPIO buttons(gpio-keys) checks for one of the > two boolean properties to enable gpio buttons as wakeup source: > 1. "wakeup-source" or > 2. the legacy "gpio-key,wakeup" > > However juno, ste-snowball and emev2-kzm9d dts file have a undetected > "wakeup" property to indictate the wakeup source. > > This patch fixes it by making use of "wakeup-source" property. > > Cc: Simon Horman <horms@verge.net.au> > Cc: Magnus Damm <magnus.damm@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > --- > arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++---- > arch/arm/boot/dts/ste-snowball.dts | 10 +++++----- > arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 12 ++++++------ > 3 files changed, 15 insertions(+), 15 deletions(-) emev2-kzm9d portion: Acked-by: Simon Horman <horms+renesas@verge.net.au> My preferred course of action would be to take that portion through the renesas tree if it was broken out into a separate patch. But I won't object if someone wants to take the whole patch/series. > diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts > index 955c24ee4a8c..8c24975e8f9d 100644 > --- a/arch/arm/boot/dts/emev2-kzm9d.dts > +++ b/arch/arm/boot/dts/emev2-kzm9d.dts > @@ -35,28 +35,28 @@ > > button@1 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > label = "DSW2-1"; > linux,code = <KEY_1>; > gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; > }; > button@2 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > label = "DSW2-2"; > linux,code = <KEY_2>; > gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; > }; > button@3 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > label = "DSW2-3"; > linux,code = <KEY_3>; > gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; > }; > button@4 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > label = "DSW2-4"; > linux,code = <KEY_4>; > gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; > diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts > index 32a5ccb14e7e..e80e42163883 100644 > --- a/arch/arm/boot/dts/ste-snowball.dts > +++ b/arch/arm/boot/dts/ste-snowball.dts > @@ -47,35 +47,35 @@ > > button@1 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <2>; > label = "userpb"; > gpios = <&gpio1 0 0x4>; > }; > button@2 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <3>; > label = "extkb1"; > gpios = <&gpio4 23 0x4>; > }; > button@3 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <4>; > label = "extkb2"; > gpios = <&gpio4 24 0x4>; > }; > button@4 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <5>; > label = "extkb3"; > gpios = <&gpio5 1 0x4>; > }; > button@5 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <6>; > label = "extkb4"; > gpios = <&gpio5 2 0x4>; > diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi > index 05e461dc6c1f..a15e1fb4d192 100644 > --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi > +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi > @@ -61,42 +61,42 @@ > > button@1 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <116>; > label = "POWER"; > gpios = <&iofpga_gpio0 0 0x4>; > }; > button@2 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <102>; > label = "HOME"; > gpios = <&iofpga_gpio0 1 0x4>; > }; > button@3 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <152>; > label = "RLOCK"; > gpios = <&iofpga_gpio0 2 0x4>; > }; > button@4 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <115>; > label = "VOL+"; > gpios = <&iofpga_gpio0 3 0x4>; > }; > button@5 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <114>; > label = "VOL-"; > gpios = <&iofpga_gpio0 4 0x4>; > }; > button@6 { > debounce_interval = <50>; > - wakeup = <1>; > + wakeup-source; > linux,code = <99>; > label = "NMI"; > gpios = <&iofpga_gpio0 5 0x4>; > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
On 14/10/15 01:13, Simon Horman wrote: > [cc linux-sh] > > On Tue, Oct 13, 2015 at 02:32:43PM +0100, Sudeep Holla wrote: >> The keyboard driver for GPIO buttons(gpio-keys) checks for one of the >> two boolean properties to enable gpio buttons as wakeup source: >> 1. "wakeup-source" or >> 2. the legacy "gpio-key,wakeup" >> >> However juno, ste-snowball and emev2-kzm9d dts file have a undetected >> "wakeup" property to indictate the wakeup source. >> >> This patch fixes it by making use of "wakeup-source" property. >> >> Cc: Simon Horman <horms@verge.net.au> >> Cc: Magnus Damm <magnus.damm@gmail.com> >> Cc: Linus Walleij <linus.walleij@linaro.org> >> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> >> --- >> arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++---- >> arch/arm/boot/dts/ste-snowball.dts | 10 +++++----- >> arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 12 ++++++------ >> 3 files changed, 15 insertions(+), 15 deletions(-) > > emev2-kzm9d portion: > > Acked-by: Simon Horman <horms+renesas@verge.net.au> > > My preferred course of action would be to take that portion through the > renesas tree if it was broken out into a separate patch. But I won't > object if someone wants to take the whole patch/series. I can split this patch, but it is more like a bug fix IMO, I can't use these GPIO as wakeup on Juno. So I hope arm-soc guys take it directly. If not, I can split and sent it separately.
Hi Linus, On 13/10/15 14:32, Sudeep Holla wrote: > The keyboard driver for GPIO buttons(gpio-keys) checks for one of the > two boolean properties to enable gpio buttons as wakeup source: > 1. "wakeup-source" or > 2. the legacy "gpio-key,wakeup" > > However juno, ste-snowball and emev2-kzm9d dts file have a undetected > "wakeup" property to indictate the wakeup source. > > This patch fixes it by making use of "wakeup-source" property. > > Cc: Simon Horman <horms@verge.net.au> > Cc: Magnus Damm <magnus.damm@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> Please review this and provide ack if you are fine with the change for ste-snowball. I can then ask arm-soc guys to pick this up as fix for v4.3
On Tue, Oct 13, 2015 at 3:32 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: > The keyboard driver for GPIO buttons(gpio-keys) checks for one of the > two boolean properties to enable gpio buttons as wakeup source: > 1. "wakeup-source" or > 2. the legacy "gpio-key,wakeup" > > However juno, ste-snowball and emev2-kzm9d dts file have a undetected > "wakeup" property to indictate the wakeup source. > > This patch fixes it by making use of "wakeup-source" property. > > Cc: Simon Horman <horms@verge.net.au> > Cc: Magnus Damm <magnus.damm@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> OK nice, Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
Hi Arnd, On 15/10/15 15:57, Linus Walleij wrote: > On Tue, Oct 13, 2015 at 3:32 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: > >> The keyboard driver for GPIO buttons(gpio-keys) checks for one of the >> two boolean properties to enable gpio buttons as wakeup source: >> 1. "wakeup-source" or >> 2. the legacy "gpio-key,wakeup" >> >> However juno, ste-snowball and emev2-kzm9d dts file have a undetected >> "wakeup" property to indicate the wakeup source. >> >> This patch fixes it by making use of "wakeup-source" property. >> >> Cc: Simon Horman <horms@verge.net.au> >> Cc: Magnus Damm <magnus.damm@gmail.com> >> Cc: Linus Walleij <linus.walleij@linaro.org> >> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > > OK nice, > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> > Can you pick this up as fix for v4.3 with Ack from Simon and Linus Walleij ? I will repost 2/2 as a part of bigger cleanup for v4.4
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 955c24ee4a8c..8c24975e8f9d 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -35,28 +35,28 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-4"; linux,code = <KEY_4>; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 32a5ccb14e7e..e80e42163883 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -47,35 +47,35 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <2>; label = "userpb"; gpios = <&gpio1 0 0x4>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <3>; label = "extkb1"; gpios = <&gpio4 23 0x4>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <4>; label = "extkb2"; gpios = <&gpio4 24 0x4>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <5>; label = "extkb3"; gpios = <&gpio5 1 0x4>; }; button@5 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <6>; label = "extkb4"; gpios = <&gpio5 2 0x4>; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 05e461dc6c1f..a15e1fb4d192 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -61,42 +61,42 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <116>; label = "POWER"; gpios = <&iofpga_gpio0 0 0x4>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <102>; label = "HOME"; gpios = <&iofpga_gpio0 1 0x4>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <152>; label = "RLOCK"; gpios = <&iofpga_gpio0 2 0x4>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <115>; label = "VOL+"; gpios = <&iofpga_gpio0 3 0x4>; }; button@5 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <114>; label = "VOL-"; gpios = <&iofpga_gpio0 4 0x4>; }; button@6 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <99>; label = "NMI"; gpios = <&iofpga_gpio0 5 0x4>;
The keyboard driver for GPIO buttons(gpio-keys) checks for one of the two boolean properties to enable gpio buttons as wakeup source: 1. "wakeup-source" or 2. the legacy "gpio-key,wakeup" However juno, ste-snowball and emev2-kzm9d dts file have a undetected "wakeup" property to indictate the wakeup source. This patch fixes it by making use of "wakeup-source" property. Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++---- arch/arm/boot/dts/ste-snowball.dts | 10 +++++----- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 12 ++++++------ 3 files changed, 15 insertions(+), 15 deletions(-)