@@ -14,9 +14,6 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-
#include "exynos-pmu.h"
#include "regs-pmu.h"
@@ -681,23 +678,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = {
EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
};
-static void exynos_power_off(void)
-{
- unsigned int tmp;
-
- pr_info("Power down.\n");
- tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
- tmp ^= (1 << 8);
- pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
-
- /* Wait a little so we don't give a false warning below */
- mdelay(100);
-
- pr_err("Power down failed, please power off system manually.\n");
- while (1)
- ;
-}
-
static void exynos5420_powerdown_conf(enum sys_powerdown mode)
{
u32 this_cluster;
@@ -875,14 +855,6 @@ static void exynos5420_pmu_init(void)
pr_info("EXYNOS5420 PMU initialized\n");
}
-static int pmu_restart_notify(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- pmu_raw_writel(0x1, EXYNOS_SWRESET);
-
- return NOTIFY_DONE;
-}
-
static const struct exynos_pmu_data exynos3250_pmu_data = {
.pmu_config = exynos3250_pmu_config,
.pmu_init = exynos3250_pmu_init,
@@ -940,20 +912,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = {
{ /*sentinel*/ },
};
-/*
- * Exynos PMU restart notifier, handles restart functionality
- */
-static struct notifier_block pmu_restart_handler = {
- .notifier_call = pmu_restart_notify,
- .priority = 128,
-};
-
static int exynos_pmu_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct resource *res;
- int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pmu_base_addr = devm_ioremap_resource(dev, res);
@@ -978,12 +941,6 @@ static int exynos_pmu_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pmu_context);
- ret = register_restart_handler(&pmu_restart_handler);
- if (ret)
- dev_warn(dev, "can't register restart handler err=%d\n", ret);
-
- pm_power_off = exynos_power_off;
-
dev_dbg(dev, "Exynos PMU Driver probe done\n");
return 0;
}
Now we can use the generic syscon-{reboot/poweroff} drivers, so we don't need special handling for reboot/poweroff in exynos pmu driver. This patch remove the same. Note: This will break reboot/poweroff on boards with older dtbs with a newer kernel. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> --- arch/arm/mach-exynos/pmu.c | 43 ------------------------------------------- 1 file changed, 43 deletions(-)