| Message ID | 7ac097efc649bac4e9f2b991baaa969ce4cbc3ef.1445859834.git.p.fedin@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Pavel, On Monday 26 October 2015 05:17 PM, Pavel Fedin wrote: > Add documentation for new properties, allowing bank configuration. > > Signed-off-by: Pavel Fedin <p.fedin@samsung.com> > --- > .../devicetree/bindings/arm/samsung/exynos-srom.txt | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt > index 33886d5..73750da 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt > +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt > @@ -5,8 +5,25 @@ Required properties: > > - reg: offset and length of the register set > > -Example: > +Bank configurations can be defined as an optional subnodes. They can have the > +following properties: > +- bank : bank number (0 - 3) > +- width : data width in bytes (1 or 2). If omitted, default of 1 is used. > +- srom-timing : array of 7 integers: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs > + I think these will be optional properties as all Exynos SoC may not be having these. So better to add them under "Optional Properties" heading, and move this above the "-Example" heading > +Example: basic definition, no banks are configured > + sromc@12570000 { > + compatible = "samsung,exynos-srom"; > + reg = <0x12570000 0x10>; > + }; > + > +Example: SROMc with bank3 configuration > sromc@12570000 { > compatible = "samsung,exynos-srom"; > reg = <0x12570000 0x10>; > + bank@3 { > + bank = <3>; > + width = <2>; > + srom-timing = <1 9 12 1 9 1 1>; > + }; > }; > Thanks, Pankaj Dubey -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello! > > +Bank configurations can be defined as an optional subnodes. They can have the > > +following properties: > > +- bank : bank number (0 - 3) > > +- width : data width in bytes (1 or 2). If omitted, default of 1 is used. > > +- srom-timing : array of 7 integers: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs > > + > > I think these will be optional properties as all Exynos SoC may not be > having these. So better to add them under "Optional Properties" heading, > and move this above the "-Example" heading Not really. Actually 'bank' is not optional, because it actually identifies to which bank properties are applied, and srom-timings are settings by themselves. Without both of them the definition just doesn't make sense. The only really optional specifier is 'width', which has a default. Could you give me an example of how to write this correctly? Kind regards, Pavel Fedin Expert Engineer Samsung Electronics Research center Russia -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt index 33886d5..73750da 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt @@ -5,8 +5,25 @@ Required properties: - reg: offset and length of the register set -Example: +Bank configurations can be defined as an optional subnodes. They can have the +following properties: +- bank : bank number (0 - 3) +- width : data width in bytes (1 or 2). If omitted, default of 1 is used. +- srom-timing : array of 7 integers: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs + +Example: basic definition, no banks are configured + sromc@12570000 { + compatible = "samsung,exynos-srom"; + reg = <0x12570000 0x10>; + }; + +Example: SROMc with bank3 configuration sromc@12570000 { compatible = "samsung,exynos-srom"; reg = <0x12570000 0x10>; + bank@3 { + bank = <3>; + width = <2>; + srom-timing = <1 9 12 1 9 1 1>; + }; };
Add documentation for new properties, allowing bank configuration. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> --- .../devicetree/bindings/arm/samsung/exynos-srom.txt | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)