| Message ID | 1445422216-29375-3-git-send-email-sudeep.holla@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Oct 21, 2015 at 5:09 AM, Sudeep Holla <sudeep.holla@arm.com> wrote: > This patch marks all the reference to the legacy wakeup bindings > and replaces them with the standard "wakeup-source" property. > > All these legacy property are also listed under a separate section in > the generic wakeup-source binding document. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/crypto/fsl-sec4.txt | 4 ++-- > Documentation/devicetree/bindings/input/ads7846.txt | 3 ++- > Documentation/devicetree/bindings/input/gpio-keys-polled.txt | 1 + > Documentation/devicetree/bindings/input/gpio-keys.txt | 1 + > Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt | 1 + > Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt | 3 ++- > Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt | 1 + > Documentation/devicetree/bindings/input/samsung-keypad.txt | 3 ++- > Documentation/devicetree/bindings/mfd/tc3589x.txt | 1 + > Documentation/devicetree/bindings/mmc/mmc.txt | 5 +++-- > Documentation/devicetree/bindings/rtc/isil,isl12057.txt | 10 +++++----- > Documentation/devicetree/bindings/rtc/rtc-opal.txt | 5 +++-- > 12 files changed, 24 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt > index 6831d025ec24..adeca34c5a33 100644 > --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt > +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt > @@ -441,7 +441,7 @@ System ON/OFF key driver > regmap = <&snvs>; > interrupts = <0 4 0x4> > linux,keycode = <116>; /* KEY_POWER */ > - wakeup; > + wakeup-source; > }; > > ===================================================================== > @@ -530,7 +530,7 @@ FULL EXAMPLE > regmap = <&sec_mon>; > interrupts = <0 4 0x4>; > linux,keycode = <116>; /* KEY_POWER */ > - wakeup; > + wakeup-source; > }; > }; > > diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt > index df8b1279491d..33a1638b61d6 100644 > --- a/Documentation/devicetree/bindings/input/ads7846.txt > +++ b/Documentation/devicetree/bindings/input/ads7846.txt > @@ -65,6 +65,7 @@ must be specified. > pendown-gpio GPIO handle describing the pin the !PENIRQ > line is connected to. > wakeup-source use any event on touchscreen as wakeup event. > + (Legacy property support: "linux,wakeup") > > > Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: > @@ -86,6 +87,6 @@ must be specified. > ti,x-plate-ohms = /bits/ 16 <40>; > ti,pressure-max = /bits/ 16 <255>; > > - linux,wakeup; > + wakeup-source; > }; > }; > diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt > index 5b91f5a3bd5c..d698475a9262 100644 > --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt > +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt > @@ -21,6 +21,7 @@ Device-Tree bindings for input/gpio_keys_polled.c keyboard driver > - debounce-interval: Debouncing interval time in milliseconds. > If not specified defaults to 5. > - wakeup-source: Boolean, button can wake-up the system. > + (Legacy property supported: "gpio-key,wakeup") > > Example nodes: > > diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt > index 072bf7573c37..cf1333d1dd52 100644 > --- a/Documentation/devicetree/bindings/input/gpio-keys.txt > +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt > @@ -24,6 +24,7 @@ both at the same time. Specifying both properties is allowed. > - debounce-interval: Debouncing interval time in milliseconds. > If not specified defaults to 5. > - wakeup-source: Boolean, button can wake-up the system. > + (Legacy property supported: "gpio-key,wakeup") > - linux,can-disable: Boolean, indicates that button is connected > to dedicated (not shared) interrupt which can be disabled to > suppress events from the button. > diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt > index 4d86059c370c..d0ea09ba249f 100644 > --- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt > +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt > @@ -20,6 +20,7 @@ report the event using GPIO interrupts to the cpu. > Optional Properties: > - linux,no-autorepeat: do no enable autorepeat feature. > - wakeup-source: use any event on keypad as wakeup event. > + (Legacy property supported: "linux,wakeup") > - debounce-delay-ms: debounce interval in milliseconds > - col-scan-delay-us: delay, measured in microseconds, that is needed > before we can scan keypad after activating column gpio > diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt > index 0382b8bd69c6..1faa7292e21f 100644 > --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt > +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt > @@ -29,7 +29,8 @@ Optional properties, in addition to those specified by the shared > - nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing > - nvidia,repeat-delay-ms: delay in milliseconds before repeat starts > - nvidia,ghost-filter: enable ghost filtering for this device > -- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume > +- wakeup-source: configure keyboard as a wakeup source for suspend/resume > + (Legacy property supported: "nvidia,wakeup-source") > > Example: > > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt > index ee6215681182..4a9dc6ba96b1 100644 > --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt > +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt > @@ -37,6 +37,7 @@ PROPERTIES > Usage: optional > Value type: <bool> > Definition: use any event on keypad as wakeup event. > + (Legacy property supported: "linux,keypad-wakeup") > > - keypad,num-rows: > Usage: required > diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt > index 863e77f619dc..5305e74e5742 100644 > --- a/Documentation/devicetree/bindings/input/samsung-keypad.txt > +++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt > @@ -38,6 +38,7 @@ event using a interrupt to the cpu. > > Optional Properties: > - wakeup-source: use any event on keypad as wakeup event. > + (Legacy property supported: "linux,input-wakeup") > > Optional Properties specific to linux: > - linux,keypad-no-autorepeat: do no enable autorepeat feature. > @@ -51,7 +52,7 @@ event using a interrupt to the cpu. > samsung,keypad-num-rows = <2>; > samsung,keypad-num-columns = <8>; > linux,input-no-autorepeat; > - linux,input-wakeup; > + wakeup-source; > > pinctrl-names = "default"; > pinctrl-0 = <&keypad_rows &keypad_columns>; > diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt > index 37bf7f1aa70a..23fc2f21f5a4 100644 > --- a/Documentation/devicetree/bindings/mfd/tc3589x.txt > +++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt > @@ -56,6 +56,7 @@ following built-in devices: gpio, keypad, rotator (vibrator), PWM (for > bindings/input/matrix-keymap.txt > - linux,no-autorepeat: do no enable autorepeat feature. > - wakeup-source: use any event on keypad as wakeup event. > + (Legacy property supported: "linux,wakeup") > > Example: > > diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt > index 0384fc3f64e8..a88f5dc775bd 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc.txt > +++ b/Documentation/devicetree/bindings/mmc/mmc.txt > @@ -67,7 +67,8 @@ polarity is in effect. > > Optional SDIO properties: > - keep-power-in-suspend: Preserves card power during a suspend/resume cycle > -- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion > +- wakeup-source: Enables wake up of host system on SDIO IRQ assertion > + (Legacy property supported: "enable-sdio-wakeup") > > > MMC power sequences: > @@ -117,7 +118,7 @@ sdhci@ab000000 { > wp-gpios = <&gpio 70 0>; > max-frequency = <50000000>; > keep-power-in-suspend; > - enable-sdio-wakeup; > + wakeup-source; > mmc-pwrseq = <&sdhci0_pwrseq> > } > > diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt > index 501c39ceae79..cf83e0940302 100644 > --- a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt > +++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt > @@ -5,7 +5,7 @@ consisting of a compatible field, an address and possibly an interrupt > line). > > Nonetheless, it also supports an option boolean property > -("isil,irq2-can-wakeup-machine") to handle the specific use-case found > +("wakeup-source") to handle the specific use-case found > on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104 > and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip > (associated with the alarm supported by the driver) is not connected > @@ -22,9 +22,9 @@ can wake up the device. > > Optional properties: > > - - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source, > - independently of the availability of an IRQ line connected to the > - SoC. > + - "wakeup-source": mark the chip as a wakeup source, independently of > + the availability of an IRQ line connected to the SoC. > + (Legacy property supported: "isil,irq2-can-wakeup-machine") > > - "interrupt-parent", "interrupts": for passing the interrupt line > of the SoC connected to IRQ#2 of the RTC chip. > @@ -74,5 +74,5 @@ Example isl12057 node without IRQ#2 pin connected to the SoC but to a > isl12057: isl12057@68 { > compatible = "isil,isl12057"; > reg = <0x68>; > - isil,irq2-can-wakeup-machine; > + wakeup-source; > }; > diff --git a/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/Documentation/devicetree/bindings/rtc/rtc-opal.txt > index af87e5ecac54..a1734e5cb75b 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc-opal.txt > +++ b/Documentation/devicetree/bindings/rtc/rtc-opal.txt > @@ -5,12 +5,13 @@ IBM OPAL real-time clock > - comapatible: Should be "ibm,opal-rtc" > > Optional properties: > -- has-tpo: Decides if the wakeup is supported or not. > +- wakeup-source: Decides if the wakeup is supported or not > + (Legacy property supported: "has-tpo") > > Example: > rtc { > compatible = "ibm,opal-rtc"; > - has-tpo; > + wakeup-source; > phandle = <0x10000029>; > linux,phandle = <0x10000029>; > }; > -- > 1.9.1 >
On 21/10/15 23:04, Rob Herring wrote: > On Wed, Oct 21, 2015 at 5:09 AM, Sudeep Holla <sudeep.holla@arm.com> wrote: >> This patch marks all the reference to the legacy wakeup bindings >> and replaces them with the standard "wakeup-source" property. >> >> All these legacy property are also listed under a separate section in >> the generic wakeup-source binding document. >> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Pawel Moll <pawel.moll@arm.com> >> Cc: Mark Rutland <mark.rutland@arm.com> >> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> >> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > > Acked-by: Rob Herring <robh@kernel.org> > Thanks Rob, can you take these couple(first two) of DT binding patches via devicetree. I can then push remaining patches via respective trees later.
On Wed, Oct 28, 2015 at 1:23 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: > > > On 21/10/15 23:04, Rob Herring wrote: >> >> On Wed, Oct 21, 2015 at 5:09 AM, Sudeep Holla <sudeep.holla@arm.com> >> wrote: >>> >>> This patch marks all the reference to the legacy wakeup bindings >>> and replaces them with the standard "wakeup-source" property. >>> >>> All these legacy property are also listed under a separate section in >>> the generic wakeup-source binding document. >>> >>> Cc: Rob Herring <robh+dt@kernel.org> >>> Cc: Pawel Moll <pawel.moll@arm.com> >>> Cc: Mark Rutland <mark.rutland@arm.com> >>> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> >>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> >> >> >> Acked-by: Rob Herring <robh@kernel.org> >> > > Thanks Rob, can you take these couple(first two) of DT binding patches > via devicetree. I can then push remaining patches via respective trees > later. Both applied. Rob
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 6831d025ec24..adeca34c5a33 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -441,7 +441,7 @@ System ON/OFF key driver regmap = <&snvs>; interrupts = <0 4 0x4> linux,keycode = <116>; /* KEY_POWER */ - wakeup; + wakeup-source; }; ===================================================================== @@ -530,7 +530,7 @@ FULL EXAMPLE regmap = <&sec_mon>; interrupts = <0 4 0x4>; linux,keycode = <116>; /* KEY_POWER */ - wakeup; + wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt index df8b1279491d..33a1638b61d6 100644 --- a/Documentation/devicetree/bindings/input/ads7846.txt +++ b/Documentation/devicetree/bindings/input/ads7846.txt @@ -65,6 +65,7 @@ must be specified. pendown-gpio GPIO handle describing the pin the !PENIRQ line is connected to. wakeup-source use any event on touchscreen as wakeup event. + (Legacy property support: "linux,wakeup") Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: @@ -86,6 +87,6 @@ must be specified. ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; - linux,wakeup; + wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt index 5b91f5a3bd5c..d698475a9262 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -21,6 +21,7 @@ Device-Tree bindings for input/gpio_keys_polled.c keyboard driver - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") Example nodes: diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index 072bf7573c37..cf1333d1dd52 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -24,6 +24,7 @@ both at the same time. Specifying both properties is allowed. - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") - linux,can-disable: Boolean, indicates that button is connected to dedicated (not shared) interrupt which can be disabled to suppress events from the button. diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt index 4d86059c370c..d0ea09ba249f 100644 --- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt @@ -20,6 +20,7 @@ report the event using GPIO interrupts to the cpu. Optional Properties: - linux,no-autorepeat: do no enable autorepeat feature. - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") - debounce-delay-ms: debounce interval in milliseconds - col-scan-delay-us: delay, measured in microseconds, that is needed before we can scan keypad after activating column gpio diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt index 0382b8bd69c6..1faa7292e21f 100644 --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -29,7 +29,8 @@ Optional properties, in addition to those specified by the shared - nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing - nvidia,repeat-delay-ms: delay in milliseconds before repeat starts - nvidia,ghost-filter: enable ghost filtering for this device -- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume +- wakeup-source: configure keyboard as a wakeup source for suspend/resume + (Legacy property supported: "nvidia,wakeup-source") Example: diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt index ee6215681182..4a9dc6ba96b1 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt @@ -37,6 +37,7 @@ PROPERTIES Usage: optional Value type: <bool> Definition: use any event on keypad as wakeup event. + (Legacy property supported: "linux,keypad-wakeup") - keypad,num-rows: Usage: required diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt index 863e77f619dc..5305e74e5742 100644 --- a/Documentation/devicetree/bindings/input/samsung-keypad.txt +++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt @@ -38,6 +38,7 @@ event using a interrupt to the cpu. Optional Properties: - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,input-wakeup") Optional Properties specific to linux: - linux,keypad-no-autorepeat: do no enable autorepeat feature. @@ -51,7 +52,7 @@ event using a interrupt to the cpu. samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_columns>; diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt index 37bf7f1aa70a..23fc2f21f5a4 100644 --- a/Documentation/devicetree/bindings/mfd/tc3589x.txt +++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt @@ -56,6 +56,7 @@ following built-in devices: gpio, keypad, rotator (vibrator), PWM (for bindings/input/matrix-keymap.txt - linux,no-autorepeat: do no enable autorepeat feature. - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") Example: diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 0384fc3f64e8..a88f5dc775bd 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -67,7 +67,8 @@ polarity is in effect. Optional SDIO properties: - keep-power-in-suspend: Preserves card power during a suspend/resume cycle -- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion +- wakeup-source: Enables wake up of host system on SDIO IRQ assertion + (Legacy property supported: "enable-sdio-wakeup") MMC power sequences: @@ -117,7 +118,7 @@ sdhci@ab000000 { wp-gpios = <&gpio 70 0>; max-frequency = <50000000>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; mmc-pwrseq = <&sdhci0_pwrseq> } diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt index 501c39ceae79..cf83e0940302 100644 --- a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt +++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt @@ -5,7 +5,7 @@ consisting of a compatible field, an address and possibly an interrupt line). Nonetheless, it also supports an option boolean property -("isil,irq2-can-wakeup-machine") to handle the specific use-case found +("wakeup-source") to handle the specific use-case found on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104 and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip (associated with the alarm supported by the driver) is not connected @@ -22,9 +22,9 @@ can wake up the device. Optional properties: - - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source, - independently of the availability of an IRQ line connected to the - SoC. + - "wakeup-source": mark the chip as a wakeup source, independently of + the availability of an IRQ line connected to the SoC. + (Legacy property supported: "isil,irq2-can-wakeup-machine") - "interrupt-parent", "interrupts": for passing the interrupt line of the SoC connected to IRQ#2 of the RTC chip. @@ -74,5 +74,5 @@ Example isl12057 node without IRQ#2 pin connected to the SoC but to a isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; - isil,irq2-can-wakeup-machine; + wakeup-source; }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/Documentation/devicetree/bindings/rtc/rtc-opal.txt index af87e5ecac54..a1734e5cb75b 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-opal.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-opal.txt @@ -5,12 +5,13 @@ IBM OPAL real-time clock - comapatible: Should be "ibm,opal-rtc" Optional properties: -- has-tpo: Decides if the wakeup is supported or not. +- wakeup-source: Decides if the wakeup is supported or not + (Legacy property supported: "has-tpo") Example: rtc { compatible = "ibm,opal-rtc"; - has-tpo; + wakeup-source; phandle = <0x10000029>; linux,phandle = <0x10000029>; };
This patch marks all the reference to the legacy wakeup bindings and replaces them with the standard "wakeup-source" property. All these legacy property are also listed under a separate section in the generic wakeup-source binding document. Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- Documentation/devicetree/bindings/crypto/fsl-sec4.txt | 4 ++-- Documentation/devicetree/bindings/input/ads7846.txt | 3 ++- Documentation/devicetree/bindings/input/gpio-keys-polled.txt | 1 + Documentation/devicetree/bindings/input/gpio-keys.txt | 1 + Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt | 1 + Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt | 3 ++- Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt | 1 + Documentation/devicetree/bindings/input/samsung-keypad.txt | 3 ++- Documentation/devicetree/bindings/mfd/tc3589x.txt | 1 + Documentation/devicetree/bindings/mmc/mmc.txt | 5 +++-- Documentation/devicetree/bindings/rtc/isil,isl12057.txt | 10 +++++----- Documentation/devicetree/bindings/rtc/rtc-opal.txt | 5 +++-- 12 files changed, 24 insertions(+), 14 deletions(-)