diff mbox

[02/14] drm/i915: Set sync polarity from adjusted mode for TRANS_DP_CTL

Message ID 1446146763-31821-3-git-send-email-ville.syrjala@linux.intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ville Syrjälä Oct. 29, 2015, 7:25 p.m. UTC 
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Rather than looking at crtc->mode (which is the user mode) dig up the
sync polarity settings from the adjusted_mode when programming
TRANS_DP_CTL on CPT/PPT.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Jesse Barnes Oct. 29, 2015, 7:33 p.m. UTC | #1 
On 10/29/2015 12:25 PM, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Rather than looking at crtc->mode (which is the user mode) dig up the
> sync polarity settings from the adjusted_mode when programming
> TRANS_DP_CTL on CPT/PPT.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index d3cd177..99fb33f 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4170,6 +4170,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
>  
>  	/* For PCH DP, enable TRANS_DP_CTL */
>  	if (HAS_PCH_CPT(dev) && intel_crtc->config->has_dp_encoder) {
> +		const struct drm_display_mode *adjusted_mode =
> +			&intel_crtc->config->base.adjusted_mode;
>  		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
>  		reg = TRANS_DP_CTL(pipe);
>  		temp = I915_READ(reg);
> @@ -4179,9 +4181,9 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
>  		temp |= TRANS_DP_OUTPUT_ENABLE;
>  		temp |= bpc << 9; /* same format but at 11:9 */
>  
> -		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
> +		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
>  			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
> -		if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
> +		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
>  			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
>  
>  		switch (intel_trans_dp_port_sel(crtc)) {
> 

God I wish we'd rename these structs a bit... "adjusted" and
"crtc->mode" don't really communicate much.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d3cd177..99fb33f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4170,6 +4170,8 @@  static void ironlake_pch_enable(struct drm_crtc *crtc)
 
 	/* For PCH DP, enable TRANS_DP_CTL */
 	if (HAS_PCH_CPT(dev) && intel_crtc->config->has_dp_encoder) {
+		const struct drm_display_mode *adjusted_mode =
+			&intel_crtc->config->base.adjusted_mode;
 		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
@@ -4179,9 +4181,9 @@  static void ironlake_pch_enable(struct drm_crtc *crtc)
 		temp |= TRANS_DP_OUTPUT_ENABLE;
 		temp |= bpc << 9; /* same format but at 11:9 */
 
-		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
-		if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
 
 		switch (intel_trans_dp_port_sel(crtc)) {