| Message ID | 20151104221000.GA3608@amd (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Nov 4, 2015 at 5:10 PM, Pavel Machek <pavel@ucw.cz> wrote: > Hi! > >> >>>>index dac78ad..b86f06a 100644 >> >>>>--- a/drivers/gpu/drm/radeon/atombios_crtc.c >> >>>>+++ b/drivers/gpu/drm/radeon/atombios_crtc.c >> >>>>@@ -569,6 +569,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, >> >>>> radeon_crtc->pll_flags = 0; >> >>>> >> >>>> if (ASIC_IS_AVIVO(rdev)) { >> >>>>+ radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; >> >>>>+ >> >>>> if ((rdev->family == CHIP_RS600) || >> >>>> (rdev->family == CHIP_RS690) || >> >>>> (rdev->family == CHIP_RS740)) >> >>>> >> >>>Help.. maybe... it is tricky to tell. It definitely does _not_ fix the >> >>>issue completely. >> >>You could also try the old pll algorithm: >> >I reverted the patch above, and switched to the old algorithm. >> > >> >The flicker is still there. (But maybe its less horrible, like with >> >RADEON_PLL_PREFER_MINM_OVER_MAXP). >> >> The flickering would vanish completely if that's the reason for the issue >> you are seeing. > >> Try setting ref_div_min and ref_div_max to 2 in >> radeon_compute_pll_avivo(). > > Ok, I did this, but no luck, still flickers. But the flicker only > happens when something changes on screen, like dragging a big > window. Is that consistent with wrong PLL timings? Does it go away with radeon.dpm=0? Sounds more like either memory reclocking happening outside of vblank, or underflow to the display controllers. Alex > > diff --git a/config.32 b/config.32 > index 00e5dd2..4734158 100644 > --- a/config.32 > +++ b/config.32 > @@ -1090,7 +1090,7 @@ CONFIG_DEVTMPFS_MOUNT=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > CONFIG_FW_LOADER=y > CONFIG_FIRMWARE_IN_KERNEL=y > -CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin" > +CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin" > CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" > # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set > CONFIG_ALLOW_DEV_COREDUMP=y > diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c > index dac78ad..dcc4f4d 100644 > --- a/drivers/gpu/drm/radeon/atombios_crtc.c > +++ b/drivers/gpu/drm/radeon/atombios_crtc.c > @@ -569,6 +569,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, > radeon_crtc->pll_flags = 0; > > if (ASIC_IS_AVIVO(rdev)) { > + //radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; > + > if ((rdev->family == CHIP_RS600) || > (rdev->family == CHIP_RS690) || > (rdev->family == CHIP_RS740)) > diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c > index 6743174..bebaf4f 100644 > --- a/drivers/gpu/drm/radeon/radeon_display.c > +++ b/drivers/gpu/drm/radeon/radeon_display.c > @@ -947,6 +947,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, > fb_div_max = pll->max_feedback_div; > > if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) { > + printk("radeon: fractional divider\n"); > fb_div_min *= 10; > fb_div_max *= 10; > } > @@ -966,6 +967,9 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, > else > ref_div_max = pll->max_ref_div; > > + ref_div_min = 2; > + ref_div_max = 2; > + > /* determine allowed post divider range */ > if (pll->flags & RADEON_PLL_USE_POST_DIV) { > post_div_min = pll->post_div; > @@ -1020,6 +1024,8 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, > diff = abs(target_clock - (pll->reference_freq * fb_div) / > (ref_div * post_div)); > > + printk("post_div = %d, diff = %d\n", post_div, diff); > + > if (diff < diff_best || (diff == diff_best && > !(pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP))) { > > @@ -1028,6 +1034,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, > } > } > post_div = post_div_best; > + printk("Selected post_div = %d\n", post_div); > > /* get the feedback and reference divider for the optimal value */ > avivo_get_fb_ref_div(nom, den, post_div, fb_div_max, ref_div_max, > @@ -1062,7 +1069,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, > *ref_div_p = ref_div; > *post_div_p = post_div; > > - DRM_DEBUG_KMS("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n", > + printk("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n", > freq, *dot_clock_p * 10, *fb_div_p, *frac_fb_div_p, > ref_div, post_div); > } > > >> But I'm not 100% convinced that this is actually a PLL problem, try to >> compile the firmware it complains about into the kernel as well. > > Did that, too. > > Best regards, > Pavel > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04.11.2015 23:13, Alex Deucher wrote: > On Wed, Nov 4, 2015 at 5:10 PM, Pavel Machek <pavel@ucw.cz> wrote: >> Hi! >> >>>>>>> index dac78ad..b86f06a 100644 >>>>>>> --- a/drivers/gpu/drm/radeon/atombios_crtc.c >>>>>>> +++ b/drivers/gpu/drm/radeon/atombios_crtc.c >>>>>>> @@ -569,6 +569,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, >>>>>>> radeon_crtc->pll_flags = 0; >>>>>>> >>>>>>> if (ASIC_IS_AVIVO(rdev)) { >>>>>>> + radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; >>>>>>> + >>>>>>> if ((rdev->family == CHIP_RS600) || >>>>>>> (rdev->family == CHIP_RS690) || >>>>>>> (rdev->family == CHIP_RS740)) >>>>>>> >>>>>> Help.. maybe... it is tricky to tell. It definitely does _not_ fix the >>>>>> issue completely. >>>>> You could also try the old pll algorithm: >>>> I reverted the patch above, and switched to the old algorithm. >>>> >>>> The flicker is still there. (But maybe its less horrible, like with >>>> RADEON_PLL_PREFER_MINM_OVER_MAXP). >>> The flickering would vanish completely if that's the reason for the issue >>> you are seeing. >>> Try setting ref_div_min and ref_div_max to 2 in >>> radeon_compute_pll_avivo(). >> Ok, I did this, but no luck, still flickers. But the flicker only >> happens when something changes on screen, like dragging a big >> window. Is that consistent with wrong PLL timings? > Does it go away with radeon.dpm=0? Sounds more like either memory > reclocking happening outside of vblank, or underflow to the display > controllers. Sounds like my suspicion was right, that doesn't seem to be a PLL issue after all. Just to rule out the obvious your system works fine with windows and you don't have a extra long cable for the monitor or something like this? Regards, Christian. > > Alex > >> diff --git a/config.32 b/config.32 >> index 00e5dd2..4734158 100644 >> --- a/config.32 >> +++ b/config.32 >> @@ -1090,7 +1090,7 @@ CONFIG_DEVTMPFS_MOUNT=y >> CONFIG_PREVENT_FIRMWARE_BUILD=y >> CONFIG_FW_LOADER=y >> CONFIG_FIRMWARE_IN_KERNEL=y >> -CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin" >> +CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin" >> CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" >> # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set >> CONFIG_ALLOW_DEV_COREDUMP=y >> diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c >> index dac78ad..dcc4f4d 100644 >> --- a/drivers/gpu/drm/radeon/atombios_crtc.c >> +++ b/drivers/gpu/drm/radeon/atombios_crtc.c >> @@ -569,6 +569,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, >> radeon_crtc->pll_flags = 0; >> >> if (ASIC_IS_AVIVO(rdev)) { >> + //radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; >> + >> if ((rdev->family == CHIP_RS600) || >> (rdev->family == CHIP_RS690) || >> (rdev->family == CHIP_RS740)) >> diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c >> index 6743174..bebaf4f 100644 >> --- a/drivers/gpu/drm/radeon/radeon_display.c >> +++ b/drivers/gpu/drm/radeon/radeon_display.c >> @@ -947,6 +947,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, >> fb_div_max = pll->max_feedback_div; >> >> if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) { >> + printk("radeon: fractional divider\n"); >> fb_div_min *= 10; >> fb_div_max *= 10; >> } >> @@ -966,6 +967,9 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, >> else >> ref_div_max = pll->max_ref_div; >> >> + ref_div_min = 2; >> + ref_div_max = 2; >> + >> /* determine allowed post divider range */ >> if (pll->flags & RADEON_PLL_USE_POST_DIV) { >> post_div_min = pll->post_div; >> @@ -1020,6 +1024,8 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, >> diff = abs(target_clock - (pll->reference_freq * fb_div) / >> (ref_div * post_div)); >> >> + printk("post_div = %d, diff = %d\n", post_div, diff); >> + >> if (diff < diff_best || (diff == diff_best && >> !(pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP))) { >> >> @@ -1028,6 +1034,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, >> } >> } >> post_div = post_div_best; >> + printk("Selected post_div = %d\n", post_div); >> >> /* get the feedback and reference divider for the optimal value */ >> avivo_get_fb_ref_div(nom, den, post_div, fb_div_max, ref_div_max, >> @@ -1062,7 +1069,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, >> *ref_div_p = ref_div; >> *post_div_p = post_div; >> >> - DRM_DEBUG_KMS("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n", >> + printk("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n", >> freq, *dot_clock_p * 10, *fb_div_p, *frac_fb_div_p, >> ref_div, post_div); >> } >> >> >>> But I'm not 100% convinced that this is actually a PLL problem, try to >>> compile the firmware it complains about into the kernel as well. >> Did that, too. >> >> Best regards, >> Pavel >> -- >> (english) http://www.livejournal.com/~pavelmachek >> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi! > >> The flickering would vanish completely if that's the reason for the issue > >> you are seeing. > > > >> Try setting ref_div_min and ref_div_max to 2 in > >> radeon_compute_pll_avivo(). > > > > Ok, I did this, but no luck, still flickers. But the flicker only > > happens when something changes on screen, like dragging a big > > window. Is that consistent with wrong PLL timings? > > Does it go away with radeon.dpm=0? Sounds more like either memory > reclocking happening outside of vblank, or underflow to the display > controllers. No, it does not: pavel@half:~$ cat /proc/cmdline BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4 resume=/dev/sda1 radeon.dpm=0 ..and same issue. And yes, it looks like an underflow to me. How can I debug reclocking / underflows? Best regards, Pavel
> >>>>RADEON_PLL_PREFER_MINM_OVER_MAXP). > >>>The flickering would vanish completely if that's the reason for the issue > >>>you are seeing. > >>>Try setting ref_div_min and ref_div_max to 2 in > >>> radeon_compute_pll_avivo(). > >>Ok, I did this, but no luck, still flickers. But the flicker only > >>happens when something changes on screen, like dragging a big > >>window. Is that consistent with wrong PLL timings? > >Does it go away with radeon.dpm=0? Sounds more like either memory > >reclocking happening outside of vblank, or underflow to the display > >controllers. > > Sounds like my suspicion was right, that doesn't seem to be a PLL issue > after all. > > Just to rule out the obvious your system works fine with windows and you > don't have a extra long cable for the monitor or something like >this? Cable is something like 2 meters. It does not seem to be EMI, because it only happens when the display is being updated. The system had some thermal issues before, but a) there's big fan cooling it now and b) it does not get worse with more usage. I don't think its heat. I don't have Windows for a test, sorry. Best regards, Pavel
On 06.11.2015 05:23, Pavel Machek wrote: > Hi! > >>>> The flickering would vanish completely if that's the reason for the issue >>>> you are seeing. >>> >>>> Try setting ref_div_min and ref_div_max to 2 in >>>> radeon_compute_pll_avivo(). >>> >>> Ok, I did this, but no luck, still flickers. But the flicker only >>> happens when something changes on screen, like dragging a big >>> window. Is that consistent with wrong PLL timings? >> >> Does it go away with radeon.dpm=0? Sounds more like either memory >> reclocking happening outside of vblank, or underflow to the display >> controllers. > > No, it does not: > > pavel@half:~$ cat /proc/cmdline > BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4 > resume=/dev/sda1 radeon.dpm=0 > > ..and same issue. And yes, it looks like an underflow to me. How can I > debug reclocking / underflows? Does radeon.disp_priority=2 help?
On Fri 2015-11-06 11:25:09, Michel Dänzer wrote: > On 06.11.2015 05:23, Pavel Machek wrote: > > Hi! > > > >>>> The flickering would vanish completely if that's the reason for the issue > >>>> you are seeing. > >>> > >>>> Try setting ref_div_min and ref_div_max to 2 in > >>>> radeon_compute_pll_avivo(). > >>> > >>> Ok, I did this, but no luck, still flickers. But the flicker only > >>> happens when something changes on screen, like dragging a big > >>> window. Is that consistent with wrong PLL timings? > >> > >> Does it go away with radeon.dpm=0? Sounds more like either memory > >> reclocking happening outside of vblank, or underflow to the display > >> controllers. > > > > No, it does not: > > > > pavel@half:~$ cat /proc/cmdline > > BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4 > > resume=/dev/sda1 radeon.dpm=0 > > > > ..and same issue. And yes, it looks like an underflow to me. How can I > > debug reclocking / underflows? > > Does radeon.disp_priority=2 help? Tried this, and no change, still flickers. pavel@half:~$ cat /proc/cmdline BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4 resume=/dev/sda1 radeon.dpm=0 radeon.disp_priority=2 pavel@half:~$ I searched for some more config options, and tried: pavel@half:~$ cat /proc/cmdline BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4 resume=/dev/sda1 radeon.dpm=0 radeon.disp_priority=2 radeon.amdgpu_runtime_pm=0 radeon.bapm=0 radeon.sched_hw_submission=0 radeon.enable_semaphores=0 pavel@half:~$ ..still flickers. Best regards, Pavel
diff --git a/config.32 b/config.32 index 00e5dd2..4734158 100644 --- a/config.32 +++ b/config.32 @@ -1090,7 +1090,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin" +CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin" CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_ALLOW_DEV_COREDUMP=y diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index dac78ad..dcc4f4d 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -569,6 +569,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, radeon_crtc->pll_flags = 0; if (ASIC_IS_AVIVO(rdev)) { + //radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; + if ((rdev->family == CHIP_RS600) || (rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 6743174..bebaf4f 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -947,6 +947,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, fb_div_max = pll->max_feedback_div; if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) { + printk("radeon: fractional divider\n"); fb_div_min *= 10; fb_div_max *= 10; } @@ -966,6 +967,9 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, else ref_div_max = pll->max_ref_div; + ref_div_min = 2; + ref_div_max = 2; + /* determine allowed post divider range */ if (pll->flags & RADEON_PLL_USE_POST_DIV) { post_div_min = pll->post_div; @@ -1020,6 +1024,8 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, diff = abs(target_clock - (pll->reference_freq * fb_div) / (ref_div * post_div)); + printk("post_div = %d, diff = %d\n", post_div, diff); + if (diff < diff_best || (diff == diff_best && !(pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP))) { @@ -1028,6 +1034,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, } } post_div = post_div_best; + printk("Selected post_div = %d\n", post_div); /* get the feedback and reference divider for the optimal value */ avivo_get_fb_ref_div(nom, den, post_div, fb_div_max, ref_div_max, @@ -1062,7 +1069,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, *ref_div_p = ref_div; *post_div_p = post_div; - DRM_DEBUG_KMS("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n", + printk("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n", freq, *dot_clock_p * 10, *fb_div_p, *frac_fb_div_p, ref_div, post_div); }