| Message ID | 1444383670-32693-3-git-send-email-rnayak@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Fri, Oct 09, 2015 at 03:11:04PM +0530, Rajendra Nayak wrote: > Add support to calibrate sensors on 8916 family and also add common > functions to read temperature from sensors (This can be reused on > other SoCs having similar TSENS device) > The calibration data is read from eeprom using the generic nvmem > framework apis. > > Based on the original code by Siddartha Mohanadoss and Stephen Boyd. > > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> > --- > drivers/thermal/qcom/Makefile | 2 +- > drivers/thermal/qcom/tsens-8916.c | 107 +++++++++++++++++++++++++++++ > drivers/thermal/qcom/tsens-common.c | 130 ++++++++++++++++++++++++++++++++++++ Just a small comment on organization, does it make sense to move tsens-common addition to the first patch, and then leave this patch only with the support for 8916 (like you did for the other chips)? > drivers/thermal/qcom/tsens.c | 1 + > drivers/thermal/qcom/tsens.h | 11 +++ > 5 files changed, 250 insertions(+), 1 deletion(-) > create mode 100644 drivers/thermal/qcom/tsens-8916.c > create mode 100644 drivers/thermal/qcom/tsens-common.c > > diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile > index 401069b..05c98e4 100644 > --- a/drivers/thermal/qcom/Makefile > +++ b/drivers/thermal/qcom/Makefile > @@ -1,2 +1,2 @@ > obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o > -qcom_tsens-y += tsens.o > +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o > diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c > new file mode 100644 > index 0000000..a69aea3 > --- /dev/null > +++ b/drivers/thermal/qcom/tsens-8916.c > @@ -0,0 +1,107 @@ > +/* > + * Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include <linux/platform_device.h> > +#include "tsens.h" > + > +/* eeprom layout data for 8916 */ > +#define BASE0_MASK 0x0000007f > +#define BASE1_MASK 0xfe000000 > +#define BASE0_SHIFT 0 > +#define BASE1_SHIFT 25 > + > +#define S0_P1_MASK 0x00000f80 > +#define S1_P1_MASK 0x003e0000 > +#define S2_P1_MASK 0xf8000000 > +#define S3_P1_MASK 0x000003e0 > +#define S4_P1_MASK 0x000f8000 > + > +#define S0_P2_MASK 0x0001f000 > +#define S1_P2_MASK 0x07c00000 > +#define S2_P2_MASK 0x0000001f > +#define S3_P2_MASK 0x00007c00 > +#define S4_P2_MASK 0x01f00000 > + > +#define S0_P1_SHIFT 7 > +#define S1_P1_SHIFT 17 > +#define S2_P1_SHIFT 27 > +#define S3_P1_SHIFT 5 > +#define S4_P1_SHIFT 15 > + > +#define S0_P2_SHIFT 12 > +#define S1_P2_SHIFT 22 > +#define S2_P2_SHIFT 0 > +#define S3_P2_SHIFT 10 > +#define S4_P2_SHIFT 20 > + > +#define CAL_SEL_MASK 0xe0000000 > +#define CAL_SEL_SHIFT 29 > + > +static int calibrate_8916(struct tsens_device *tmdev) > +{ > + int base0 = 0, base1 = 0, i; > + u32 p1[5], p2[5]; > + int mode = 0; > + u32 *qfprom_cdata, *qfprom_csel; > + > + qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib"); > + if (IS_ERR(qfprom_cdata)) > + return PTR_ERR(qfprom_cdata); > + > + qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel"); > + if (IS_ERR(qfprom_csel)) > + return PTR_ERR(qfprom_csel); > + > + mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; > + dev_dbg(tmdev->dev, "calibration mode is %d\n", mode); > + > + switch (mode) { > + case TWO_PT_CALIB: > + base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT; > + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; > + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; > + p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT; > + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; > + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; > + for (i = 0; i < tmdev->num_sensors; i++) > + p2[i] = ((base1 + p2[i]) << 3); > + /* Fall through */ > + case ONE_PT_CALIB2: > + base0 = (qfprom_cdata[0] & BASE0_MASK); > + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; > + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; > + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; > + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; > + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; > + for (i = 0; i < tmdev->num_sensors; i++) > + p1[i] = (((base0) + p1[i]) << 3); > + break; > + default: > + for (i = 0; i < tmdev->num_sensors; i++) { > + p1[i] = 500; > + p2[i] = 780; > + } > + break; > + } > + > + compute_intercept_slope(tmdev, p1, p2, mode); > + > + return 0; Can calibration fail ? In which cases? > +} > + > +const struct tsens_ops ops_8916 = { > + .init = init_common, > + .calibrate = calibrate_8916, > + .get_temp = get_temp_common, > +}; > diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c > new file mode 100644 > index 0000000..4acf52c > --- /dev/null > +++ b/drivers/thermal/qcom/tsens-common.c > @@ -0,0 +1,130 @@ > +/* > + * Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include <linux/platform_device.h> > +#include <linux/nvmem-consumer.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/of_address.h> > +#include <linux/regmap.h> > +#include "tsens.h" > + > +#define S0_ST_ADDR 0x1030 > +#define SN_ADDR_OFFSET 0x4 > +#define SN_ST_TEMP_MASK 0x3ff > +#define CAL_DEGC_PT1 30 > +#define CAL_DEGC_PT2 120 > +#define SLOPE_FACTOR 1000 > + > +char *qfprom_read(struct device *dev, const char *cname) > +{ > + struct nvmem_cell *cell; > + ssize_t data; > + char *ret; > + > + cell = nvmem_cell_get(dev, cname); > + if (IS_ERR(cell)) > + return ERR_CAST(cell); > + > + ret = nvmem_cell_read(cell, &data); > + nvmem_cell_put(cell); nip: add a blank line here. > + return ret; > +} > + > +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, > + u32 *p2, u32 mode) > +{ > + int i; > + int num, den; > + > + for (i = 0; i < tmdev->num_sensors; i++) { > + dev_dbg(tmdev->dev, > + "sensor%d - data_point1:%#x data_point2:%#x\n", > + i, p1[i], p2[i]); > + > + if (mode == TWO_PT_CALIB) { > + /* > + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ > + * temp_120_degc - temp_30_degc (x2 - x1) > + */ > + num = p2[i] - p1[i]; > + num *= SLOPE_FACTOR; > + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; > + tmdev->sensor[i].slope = num / den; > + } > + > + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - > + (CAL_DEGC_PT1 * > + tmdev->sensor[i].slope); > + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); > + } > +} > + > +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) > +{ > + int degc, num, den; > + > + num = (adc_code * SLOPE_FACTOR) - s->offset; > + den = s->slope; > + > + if (num > 0) > + degc = num + (den / 2); > + else if (num < 0) > + degc = num - (den / 2); > + else > + degc = num; > + > + degc /= den; > + > + return degc; > +} > + > +int get_temp_common(struct tsens_device *tmdev, int id, int *temp) > +{ > + struct tsens_sensor *s = &tmdev->sensor[id]; > + u32 code; > + unsigned int sensor_addr; > + int last_temp = 0, ret; > + > + sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET; > + ret = regmap_read(tmdev->map, sensor_addr, &code); > + if (ret) > + return ret; > + last_temp = code & SN_ST_TEMP_MASK; > + > + *temp = code_to_degc(last_temp, s) * 1000; > + > + return 0; > +} > + > +static const struct regmap_config tsens_config = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = 4, > +}; > + > +int init_common(struct tsens_device *tmdev) > +{ > + void __iomem *base; > + > + base = of_iomap(tmdev->dev->of_node, 0); > + if (IS_ERR(base)) > + return -EINVAL; > + > + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); Should this function be marked as __init so devm_* works? > + if (!tmdev->map) > + return -ENODEV; Should you do iounmap? > + > + return 0; > +} > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c > index 87f5215..3d49293 100644 > --- a/drivers/thermal/qcom/tsens.c > +++ b/drivers/thermal/qcom/tsens.c > @@ -65,6 +65,7 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); > static const struct of_device_id tsens_table[] = { > { > .compatible = "qcom,msm8916-tsens", > + .data = &ops_8916, > }, { > .compatible = "qcom,msm8974-tsens", > }, > diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h > index f0fc353..0923822 100644 > --- a/drivers/thermal/qcom/tsens.h > +++ b/drivers/thermal/qcom/tsens.h > @@ -13,6 +13,10 @@ > #ifndef __QCOM_TSENS_H__ > #define __QCOM_TSENS_H__ > > +#define ONE_PT_CALIB 0x1 > +#define ONE_PT_CALIB2 0x2 > +#define TWO_PT_CALIB 0x3 > + > struct tsens_device; > > struct tsens_sensor { > @@ -55,4 +59,11 @@ struct tsens_device { > struct tsens_sensor sensor[0]; > }; > > +char *qfprom_read(struct device *, const char *); > +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); > +int init_common(struct tsens_device *); > +int get_temp_common(struct tsens_device *, int, int *); > + > +extern const struct tsens_ops ops_8916; > + > #endif /* __QCOM_TSENS_H__ */ > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/03/2015 02:12 AM, Eduardo Valentin wrote: > On Fri, Oct 09, 2015 at 03:11:04PM +0530, Rajendra Nayak wrote: >> Add support to calibrate sensors on 8916 family and also add common >> functions to read temperature from sensors (This can be reused on >> other SoCs having similar TSENS device) >> The calibration data is read from eeprom using the generic nvmem >> framework apis. >> >> Based on the original code by Siddartha Mohanadoss and Stephen Boyd. >> >> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> >> --- >> drivers/thermal/qcom/Makefile | 2 +- >> drivers/thermal/qcom/tsens-8916.c | 107 +++++++++++++++++++++++++++++ >> drivers/thermal/qcom/tsens-common.c | 130 ++++++++++++++++++++++++++++++++++++ > > Just a small comment on organization, does it make sense to move tsens-common > addition to the first patch, and then leave this patch only with the > support for 8916 (like you did for the other chips)? So the common code gets used for 8916 and hence I added it here as part of this patch. I can as well move it to the first patch in the series, should not be an issue. > >> drivers/thermal/qcom/tsens.c | 1 + >> drivers/thermal/qcom/tsens.h | 11 +++ >> 5 files changed, 250 insertions(+), 1 deletion(-) >> create mode 100644 drivers/thermal/qcom/tsens-8916.c >> create mode 100644 drivers/thermal/qcom/tsens-common.c >> >> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile >> index 401069b..05c98e4 100644 >> --- a/drivers/thermal/qcom/Makefile >> +++ b/drivers/thermal/qcom/Makefile >> @@ -1,2 +1,2 @@ >> obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o >> -qcom_tsens-y += tsens.o >> +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o >> diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c >> new file mode 100644 >> index 0000000..a69aea3 >> --- /dev/null >> +++ b/drivers/thermal/qcom/tsens-8916.c >> @@ -0,0 +1,107 @@ >> +/* >> + * Copyright (c) 2015, The Linux Foundation. All rights reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 and >> + * only version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> +#include <linux/platform_device.h> >> +#include "tsens.h" >> + >> +/* eeprom layout data for 8916 */ >> +#define BASE0_MASK 0x0000007f >> +#define BASE1_MASK 0xfe000000 >> +#define BASE0_SHIFT 0 >> +#define BASE1_SHIFT 25 >> + >> +#define S0_P1_MASK 0x00000f80 >> +#define S1_P1_MASK 0x003e0000 >> +#define S2_P1_MASK 0xf8000000 >> +#define S3_P1_MASK 0x000003e0 >> +#define S4_P1_MASK 0x000f8000 >> + >> +#define S0_P2_MASK 0x0001f000 >> +#define S1_P2_MASK 0x07c00000 >> +#define S2_P2_MASK 0x0000001f >> +#define S3_P2_MASK 0x00007c00 >> +#define S4_P2_MASK 0x01f00000 >> + >> +#define S0_P1_SHIFT 7 >> +#define S1_P1_SHIFT 17 >> +#define S2_P1_SHIFT 27 >> +#define S3_P1_SHIFT 5 >> +#define S4_P1_SHIFT 15 >> + >> +#define S0_P2_SHIFT 12 >> +#define S1_P2_SHIFT 22 >> +#define S2_P2_SHIFT 0 >> +#define S3_P2_SHIFT 10 >> +#define S4_P2_SHIFT 20 >> + >> +#define CAL_SEL_MASK 0xe0000000 >> +#define CAL_SEL_SHIFT 29 >> + >> +static int calibrate_8916(struct tsens_device *tmdev) >> +{ >> + int base0 = 0, base1 = 0, i; >> + u32 p1[5], p2[5]; >> + int mode = 0; >> + u32 *qfprom_cdata, *qfprom_csel; >> + >> + qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib"); >> + if (IS_ERR(qfprom_cdata)) >> + return PTR_ERR(qfprom_cdata); >> + >> + qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel"); >> + if (IS_ERR(qfprom_csel)) >> + return PTR_ERR(qfprom_csel); >> + >> + mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; >> + dev_dbg(tmdev->dev, "calibration mode is %d\n", mode); >> + >> + switch (mode) { >> + case TWO_PT_CALIB: >> + base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT; >> + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; >> + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; >> + p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT; >> + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; >> + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; >> + for (i = 0; i < tmdev->num_sensors; i++) >> + p2[i] = ((base1 + p2[i]) << 3); >> + /* Fall through */ >> + case ONE_PT_CALIB2: >> + base0 = (qfprom_cdata[0] & BASE0_MASK); >> + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; >> + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; >> + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; >> + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; >> + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; >> + for (i = 0; i < tmdev->num_sensors; i++) >> + p1[i] = (((base0) + p1[i]) << 3); >> + break; >> + default: >> + for (i = 0; i < tmdev->num_sensors; i++) { >> + p1[i] = 500; >> + p2[i] = 780; >> + } >> + break; >> + } >> + >> + compute_intercept_slope(tmdev, p1, p2, mode); >> + >> + return 0; > > Can calibration fail ? In which cases? yes, it can if the eeprom reads fail for instance. > >> +} >> + >> +const struct tsens_ops ops_8916 = { >> + .init = init_common, >> + .calibrate = calibrate_8916, >> + .get_temp = get_temp_common, >> +}; >> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c >> new file mode 100644 >> index 0000000..4acf52c >> --- /dev/null >> +++ b/drivers/thermal/qcom/tsens-common.c >> @@ -0,0 +1,130 @@ >> +/* >> + * Copyright (c) 2015, The Linux Foundation. All rights reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 and >> + * only version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> +#include <linux/platform_device.h> >> +#include <linux/nvmem-consumer.h> >> +#include <linux/err.h> >> +#include <linux/io.h> >> +#include <linux/of_address.h> >> +#include <linux/regmap.h> >> +#include "tsens.h" >> + >> +#define S0_ST_ADDR 0x1030 >> +#define SN_ADDR_OFFSET 0x4 >> +#define SN_ST_TEMP_MASK 0x3ff >> +#define CAL_DEGC_PT1 30 >> +#define CAL_DEGC_PT2 120 >> +#define SLOPE_FACTOR 1000 >> + >> +char *qfprom_read(struct device *dev, const char *cname) >> +{ >> + struct nvmem_cell *cell; >> + ssize_t data; >> + char *ret; >> + >> + cell = nvmem_cell_get(dev, cname); >> + if (IS_ERR(cell)) >> + return ERR_CAST(cell); >> + >> + ret = nvmem_cell_read(cell, &data); >> + nvmem_cell_put(cell); > nip: add a blank line here. >> + return ret; >> +} >> + >> +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, >> + u32 *p2, u32 mode) >> +{ >> + int i; >> + int num, den; >> + >> + for (i = 0; i < tmdev->num_sensors; i++) { >> + dev_dbg(tmdev->dev, >> + "sensor%d - data_point1:%#x data_point2:%#x\n", >> + i, p1[i], p2[i]); >> + >> + if (mode == TWO_PT_CALIB) { >> + /* >> + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ >> + * temp_120_degc - temp_30_degc (x2 - x1) >> + */ >> + num = p2[i] - p1[i]; >> + num *= SLOPE_FACTOR; >> + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; >> + tmdev->sensor[i].slope = num / den; >> + } >> + >> + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - >> + (CAL_DEGC_PT1 * >> + tmdev->sensor[i].slope); >> + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); >> + } >> +} >> + >> +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) >> +{ >> + int degc, num, den; >> + >> + num = (adc_code * SLOPE_FACTOR) - s->offset; >> + den = s->slope; >> + >> + if (num > 0) >> + degc = num + (den / 2); >> + else if (num < 0) >> + degc = num - (den / 2); >> + else >> + degc = num; >> + >> + degc /= den; >> + >> + return degc; >> +} >> + >> +int get_temp_common(struct tsens_device *tmdev, int id, int *temp) >> +{ >> + struct tsens_sensor *s = &tmdev->sensor[id]; >> + u32 code; >> + unsigned int sensor_addr; >> + int last_temp = 0, ret; >> + >> + sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET; >> + ret = regmap_read(tmdev->map, sensor_addr, &code); >> + if (ret) >> + return ret; >> + last_temp = code & SN_ST_TEMP_MASK; >> + >> + *temp = code_to_degc(last_temp, s) * 1000; >> + >> + return 0; >> +} >> + >> +static const struct regmap_config tsens_config = { >> + .reg_bits = 32, >> + .val_bits = 32, >> + .reg_stride = 4, >> +}; >> + >> +int init_common(struct tsens_device *tmdev) >> +{ >> + void __iomem *base; >> + >> + base = of_iomap(tmdev->dev->of_node, 0); >> + if (IS_ERR(base)) >> + return -EINVAL; >> + >> + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); > > Should this function be marked as __init so devm_* works? > >> + if (!tmdev->map) >> + return -ENODEV; > > Should you do iounmap? yes, will fix these. thanks, Rajendra > >> + >> + return 0; >> +} >> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c >> index 87f5215..3d49293 100644 >> --- a/drivers/thermal/qcom/tsens.c >> +++ b/drivers/thermal/qcom/tsens.c >> @@ -65,6 +65,7 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); >> static const struct of_device_id tsens_table[] = { >> { >> .compatible = "qcom,msm8916-tsens", >> + .data = &ops_8916, >> }, { >> .compatible = "qcom,msm8974-tsens", >> }, >> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h >> index f0fc353..0923822 100644 >> --- a/drivers/thermal/qcom/tsens.h >> +++ b/drivers/thermal/qcom/tsens.h >> @@ -13,6 +13,10 @@ >> #ifndef __QCOM_TSENS_H__ >> #define __QCOM_TSENS_H__ >> >> +#define ONE_PT_CALIB 0x1 >> +#define ONE_PT_CALIB2 0x2 >> +#define TWO_PT_CALIB 0x3 >> + >> struct tsens_device; >> >> struct tsens_sensor { >> @@ -55,4 +59,11 @@ struct tsens_device { >> struct tsens_sensor sensor[0]; >> }; >> >> +char *qfprom_read(struct device *, const char *); >> +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); >> +int init_common(struct tsens_device *); >> +int get_temp_common(struct tsens_device *, int, int *); >> + >> +extern const struct tsens_ops ops_8916; >> + >> #endif /* __QCOM_TSENS_H__ */ >> -- >> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member >> of Code Aurora Forum, hosted by The Linux Foundation >>
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile index 401069b..05c98e4 100644 --- a/drivers/thermal/qcom/Makefile +++ b/drivers/thermal/qcom/Makefile @@ -1,2 +1,2 @@ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o -qcom_tsens-y += tsens.o +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c new file mode 100644 index 0000000..a69aea3 --- /dev/null +++ b/drivers/thermal/qcom/tsens-8916.c @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* eeprom layout data for 8916 */ +#define BASE0_MASK 0x0000007f +#define BASE1_MASK 0xfe000000 +#define BASE0_SHIFT 0 +#define BASE1_SHIFT 25 + +#define S0_P1_MASK 0x00000f80 +#define S1_P1_MASK 0x003e0000 +#define S2_P1_MASK 0xf8000000 +#define S3_P1_MASK 0x000003e0 +#define S4_P1_MASK 0x000f8000 + +#define S0_P2_MASK 0x0001f000 +#define S1_P2_MASK 0x07c00000 +#define S2_P2_MASK 0x0000001f +#define S3_P2_MASK 0x00007c00 +#define S4_P2_MASK 0x01f00000 + +#define S0_P1_SHIFT 7 +#define S1_P1_SHIFT 17 +#define S2_P1_SHIFT 27 +#define S3_P1_SHIFT 5 +#define S4_P1_SHIFT 15 + +#define S0_P2_SHIFT 12 +#define S1_P2_SHIFT 22 +#define S2_P2_SHIFT 0 +#define S3_P2_SHIFT 10 +#define S4_P2_SHIFT 20 + +#define CAL_SEL_MASK 0xe0000000 +#define CAL_SEL_SHIFT 29 + +static int calibrate_8916(struct tsens_device *tmdev) +{ + int base0 = 0, base1 = 0, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata, *qfprom_csel; + + qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel"); + if (IS_ERR(qfprom_csel)) + return PTR_ERR(qfprom_csel); + + mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; + dev_dbg(tmdev->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 3); + /* Fall through */ + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[0] & BASE0_MASK); + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 3); + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +const struct tsens_ops ops_8916 = { + .init = init_common, + .calibrate = calibrate_8916, + .get_temp = get_temp_common, +}; diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c new file mode 100644 index 0000000..4acf52c --- /dev/null +++ b/drivers/thermal/qcom/tsens-common.c @@ -0,0 +1,130 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/nvmem-consumer.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include "tsens.h" + +#define S0_ST_ADDR 0x1030 +#define SN_ADDR_OFFSET 0x4 +#define SN_ST_TEMP_MASK 0x3ff +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + return ret; +} + +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < tmdev->num_sensors; i++) { + dev_dbg(tmdev->dev, + "sensor%d - data_point1:%#x data_point2:%#x\n", + i, p1[i], p2[i]); + + if (mode == TWO_PT_CALIB) { + /* + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + * temp_120_degc - temp_30_degc (x2 - x1) + */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + tmdev->sensor[i].slope = num / den; + } + + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + tmdev->sensor[i].slope); + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); + } +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +int get_temp_common(struct tsens_device *tmdev, int id, int *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + u32 code; + unsigned int sensor_addr; + int last_temp = 0, ret; + + sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET; + ret = regmap_read(tmdev->map, sensor_addr, &code); + if (ret) + return ret; + last_temp = code & SN_ST_TEMP_MASK; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; +} + +static const struct regmap_config tsens_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int init_common(struct tsens_device *tmdev) +{ + void __iomem *base; + + base = of_iomap(tmdev->dev->of_node, 0); + if (IS_ERR(base)) + return -EINVAL; + + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); + if (!tmdev->map) + return -ENODEV; + + return 0; +} diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 87f5215..3d49293 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -65,6 +65,7 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); static const struct of_device_id tsens_table[] = { { .compatible = "qcom,msm8916-tsens", + .data = &ops_8916, }, { .compatible = "qcom,msm8974-tsens", }, diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index f0fc353..0923822 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -13,6 +13,10 @@ #ifndef __QCOM_TSENS_H__ #define __QCOM_TSENS_H__ +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 + struct tsens_device; struct tsens_sensor { @@ -55,4 +59,11 @@ struct tsens_device { struct tsens_sensor sensor[0]; }; +char *qfprom_read(struct device *, const char *); +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); +int init_common(struct tsens_device *); +int get_temp_common(struct tsens_device *, int, int *); + +extern const struct tsens_ops ops_8916; + #endif /* __QCOM_TSENS_H__ */
Add support to calibrate sensors on 8916 family and also add common functions to read temperature from sensors (This can be reused on other SoCs having similar TSENS device) The calibration data is read from eeprom using the generic nvmem framework apis. Based on the original code by Siddartha Mohanadoss and Stephen Boyd. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- drivers/thermal/qcom/Makefile | 2 +- drivers/thermal/qcom/tsens-8916.c | 107 +++++++++++++++++++++++++++++ drivers/thermal/qcom/tsens-common.c | 130 ++++++++++++++++++++++++++++++++++++ drivers/thermal/qcom/tsens.c | 1 + drivers/thermal/qcom/tsens.h | 11 +++ 5 files changed, 250 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/qcom/tsens-8916.c create mode 100644 drivers/thermal/qcom/tsens-common.c