| Message ID | 1446598678-1908-1-git-send-email-killertofu@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Jiri Kosina |
| Headers | show |
On Tue, Nov 3, 2015 at 4:57 PM, Jason Gerecke <killertofu@gmail.com> wrote: > When connecting the Cintiq Companion 2 as an external tablet (i.e., using > it in "hybrid" mode) it has been seen to cause the kernel of the machine > it is connected to to Oops. The cause has been traced to us attempting to > switch the tablet's mode prior to actually starting HID device (resulting > in the eventual dereference of the uninitialized control URB). > > Commit 3b164a0 moved the mode switch from occuring post-start to occurring > pre-start. The change was not seen to cause issues largely due to the fact > that most devices mode switch with 'hid_hw_raw_request' (which is safe to > call prior to start) rather than 'hid_hw_request'. > > Moving the call back to its original location resolves the issue, but > causes some touch-only Bamboo tablets (e.g. 056a:00d0) to stop working. > The affected tablets require us to perform a mode switch on their > vestigial pen interface prior ignoring with -ENODEV, meaning that the > code which is responsible for doing the ignoring has to move as well. We'll need to clean up the code a bit more. But, that's for future. This patch is good to go. > Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Ping > --- > Jiri, > > Ping clued me in to the fact that 'wacom_query_tablet_data' hasn't always > been in this problematic location. The offending commit mentioned in the > revised commit summary is queued for 4.4, so this only needs to get into > the next RC rather than be targeted for stable. > > Jason > > drivers/hid/wacom_sys.c | 36 ++++++++++++++++++------------------ > 1 file changed, 18 insertions(+), 18 deletions(-) > > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c > index abb7fdf..e06af5b 100644 > --- a/drivers/hid/wacom_sys.c > +++ b/drivers/hid/wacom_sys.c > @@ -1778,24 +1778,6 @@ static int wacom_probe(struct hid_device *hdev, > features->device_type |= WACOM_DEVICETYPE_PEN; > } > > - /* Note that if query fails it is not a hard failure */ > - wacom_query_tablet_data(hdev, features); > - > - /* touch only Bamboo doesn't support pen */ > - if ((features->type == BAMBOO_TOUCH) && > - (features->device_type & WACOM_DEVICETYPE_PEN)) { > - error = -ENODEV; > - goto fail_shared_data; > - } > - > - /* pen only Bamboo neither support touch nor pad */ > - if ((features->type == BAMBOO_PEN) && > - ((features->device_type & WACOM_DEVICETYPE_TOUCH) || > - (features->device_type & WACOM_DEVICETYPE_PAD))) { > - error = -ENODEV; > - goto fail_shared_data; > - } > - > wacom_calculate_res(features); > > wacom_update_name(wacom); > @@ -1833,6 +1815,24 @@ static int wacom_probe(struct hid_device *hdev, > goto fail_hw_start; > } > > + /* Note that if query fails it is not a hard failure */ > + wacom_query_tablet_data(hdev, features); > + > + /* touch only Bamboo doesn't support pen */ > + if ((features->type == BAMBOO_TOUCH) && > + (features->device_type & WACOM_DEVICETYPE_PEN)) { > + error = -ENODEV; > + goto fail_hw_start; > + } > + > + /* pen only Bamboo neither support touch nor pad */ > + if ((features->type == BAMBOO_PEN) && > + ((features->device_type & WACOM_DEVICETYPE_TOUCH) || > + (features->device_type & WACOM_DEVICETYPE_PAD))) { > + error = -ENODEV; > + goto fail_hw_start; > + } > + > if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR) > error = hid_hw_open(hdev); > > -- > 2.6.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 3 Nov 2015, Jason Gerecke wrote: > When connecting the Cintiq Companion 2 as an external tablet (i.e., using > it in "hybrid" mode) it has been seen to cause the kernel of the machine > it is connected to to Oops. The cause has been traced to us attempting to > switch the tablet's mode prior to actually starting HID device (resulting > in the eventual dereference of the uninitialized control URB). > > Commit 3b164a0 moved the mode switch from occuring post-start to occurring > pre-start. The change was not seen to cause issues largely due to the fact > that most devices mode switch with 'hid_hw_raw_request' (which is safe to > call prior to start) rather than 'hid_hw_request'. > > Moving the call back to its original location resolves the issue, but > causes some touch-only Bamboo tablets (e.g. 056a:00d0) to stop working. > The affected tablets require us to perform a mode switch on their > vestigial pen interface prior ignoring with -ENODEV, meaning that the > code which is responsible for doing the ignoring has to move as well. > > Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> > --- > Jiri, > > Ping clued me in to the fact that 'wacom_query_tablet_data' hasn't always > been in this problematic location. The offending commit mentioned in the > revised commit summary is queued for 4.4, so this only needs to get into > the next RC rather than be targeted for stable. Queued as super-late patch into for-4.4/wacom.
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index abb7fdf..e06af5b 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -1778,24 +1778,6 @@ static int wacom_probe(struct hid_device *hdev, features->device_type |= WACOM_DEVICETYPE_PEN; } - /* Note that if query fails it is not a hard failure */ - wacom_query_tablet_data(hdev, features); - - /* touch only Bamboo doesn't support pen */ - if ((features->type == BAMBOO_TOUCH) && - (features->device_type & WACOM_DEVICETYPE_PEN)) { - error = -ENODEV; - goto fail_shared_data; - } - - /* pen only Bamboo neither support touch nor pad */ - if ((features->type == BAMBOO_PEN) && - ((features->device_type & WACOM_DEVICETYPE_TOUCH) || - (features->device_type & WACOM_DEVICETYPE_PAD))) { - error = -ENODEV; - goto fail_shared_data; - } - wacom_calculate_res(features); wacom_update_name(wacom); @@ -1833,6 +1815,24 @@ static int wacom_probe(struct hid_device *hdev, goto fail_hw_start; } + /* Note that if query fails it is not a hard failure */ + wacom_query_tablet_data(hdev, features); + + /* touch only Bamboo doesn't support pen */ + if ((features->type == BAMBOO_TOUCH) && + (features->device_type & WACOM_DEVICETYPE_PEN)) { + error = -ENODEV; + goto fail_hw_start; + } + + /* pen only Bamboo neither support touch nor pad */ + if ((features->type == BAMBOO_PEN) && + ((features->device_type & WACOM_DEVICETYPE_TOUCH) || + (features->device_type & WACOM_DEVICETYPE_PAD))) { + error = -ENODEV; + goto fail_hw_start; + } + if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR) error = hid_hw_open(hdev);
When connecting the Cintiq Companion 2 as an external tablet (i.e., using it in "hybrid" mode) it has been seen to cause the kernel of the machine it is connected to to Oops. The cause has been traced to us attempting to switch the tablet's mode prior to actually starting HID device (resulting in the eventual dereference of the uninitialized control URB). Commit 3b164a0 moved the mode switch from occuring post-start to occurring pre-start. The change was not seen to cause issues largely due to the fact that most devices mode switch with 'hid_hw_raw_request' (which is safe to call prior to start) rather than 'hid_hw_request'. Moving the call back to its original location resolves the issue, but causes some touch-only Bamboo tablets (e.g. 056a:00d0) to stop working. The affected tablets require us to perform a mode switch on their vestigial pen interface prior ignoring with -ENODEV, meaning that the code which is responsible for doing the ignoring has to move as well. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> --- Jiri, Ping clued me in to the fact that 'wacom_query_tablet_data' hasn't always been in this problematic location. The offending commit mentioned in the revised commit summary is queued for 4.4, so this only needs to get into the next RC rather than be targeted for stable. Jason drivers/hid/wacom_sys.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)