Message ID | 1446170078-20792-1-git-send-email-vivek.kasireddy@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Oct 29, 2015 at 06:54:38PM -0700, Vivek Kasireddy wrote: > While pinning a fb object to the display plane, only install a fence > if the object is using a normal view. This corresponds with the > behavior found in i915_gem_object_do_pin() where the fencability > criteria is determined only for objects with normal views. > > v2: > Look at the object's map_and_fenceable flag to determine whether to > install a fence or not (Chris). > > v3: > Pin and unpin a fence only if the current view type is normal. > > v4: > Extend the "view type is normal" check for pin_fence as well. > > Cc: Chris Wilson <chris@chris-wilson.co.uk> > Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> > Cc: Ville Syrjala <ville.syrjala@linux.intel.com> > Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> lgtm Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > --- > drivers/gpu/drm/i915/intel_display.c | 36 ++++++++++++++++++++---------------- > 1 file changed, 20 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > index 2fdfca1..9c80968 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -2419,22 +2419,24 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane, > * framebuffer compression. For simplicity, we always install > * a fence as the cost is not that onerous. > */ > - ret = i915_gem_object_get_fence(obj); > - if (ret == -EDEADLK) { > - /* > - * -EDEADLK means there are no free fences > - * no pending flips. > - * > - * This is propagated to atomic, but it uses > - * -EDEADLK to force a locking recovery, so > - * change the returned error to -EBUSY. > - */ > - ret = -EBUSY; > - goto err_unpin; > - } else if (ret) > - goto err_unpin; > + if (view.type == I915_GGTT_VIEW_NORMAL) { > + ret = i915_gem_object_get_fence(obj); > + if (ret == -EDEADLK) { > + /* > + * -EDEADLK means there are no free fences > + * no pending flips. > + * > + * This is propagated to atomic, but it uses > + * -EDEADLK to force a locking recovery, so > + * change the returned error to -EBUSY. > + */ > + ret = -EBUSY; > + goto err_unpin; > + } else if (ret) > + goto err_unpin; > > - i915_gem_object_pin_fence(obj); > + i915_gem_object_pin_fence(obj); > + } > > dev_priv->mm.interruptible = true; > intel_runtime_pm_put(dev_priv); > @@ -2460,7 +2462,9 @@ static void intel_unpin_fb_obj(struct drm_framebuffer *fb, > ret = intel_fill_fb_ggtt_view(&view, fb, plane_state); > WARN_ONCE(ret, "Couldn't get view from plane state!"); > > - i915_gem_object_unpin_fence(obj); > + if (view.type == I915_GGTT_VIEW_NORMAL) > + i915_gem_object_unpin_fence(obj); > + > i915_gem_object_unpin_from_display_plane(obj, &view); > } > > -- > 2.4.3
On Fri, 30 Oct 2015, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote: > On Thu, Oct 29, 2015 at 06:54:38PM -0700, Vivek Kasireddy wrote: >> While pinning a fb object to the display plane, only install a fence >> if the object is using a normal view. This corresponds with the >> behavior found in i915_gem_object_do_pin() where the fencability >> criteria is determined only for objects with normal views. >> >> v2: >> Look at the object's map_and_fenceable flag to determine whether to >> install a fence or not (Chris). >> >> v3: >> Pin and unpin a fence only if the current view type is normal. >> >> v4: >> Extend the "view type is normal" check for pin_fence as well. >> >> Cc: Chris Wilson <chris@chris-wilson.co.uk> >> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> >> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> >> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> > > lgtm > Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Pushed to drm-intel-next-fixes, thanks for the patch and review. BR, Jani. > >> --- >> drivers/gpu/drm/i915/intel_display.c | 36 ++++++++++++++++++++---------------- >> 1 file changed, 20 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c >> index 2fdfca1..9c80968 100644 >> --- a/drivers/gpu/drm/i915/intel_display.c >> +++ b/drivers/gpu/drm/i915/intel_display.c >> @@ -2419,22 +2419,24 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane, >> * framebuffer compression. For simplicity, we always install >> * a fence as the cost is not that onerous. >> */ >> - ret = i915_gem_object_get_fence(obj); >> - if (ret == -EDEADLK) { >> - /* >> - * -EDEADLK means there are no free fences >> - * no pending flips. >> - * >> - * This is propagated to atomic, but it uses >> - * -EDEADLK to force a locking recovery, so >> - * change the returned error to -EBUSY. >> - */ >> - ret = -EBUSY; >> - goto err_unpin; >> - } else if (ret) >> - goto err_unpin; >> + if (view.type == I915_GGTT_VIEW_NORMAL) { >> + ret = i915_gem_object_get_fence(obj); >> + if (ret == -EDEADLK) { >> + /* >> + * -EDEADLK means there are no free fences >> + * no pending flips. >> + * >> + * This is propagated to atomic, but it uses >> + * -EDEADLK to force a locking recovery, so >> + * change the returned error to -EBUSY. >> + */ >> + ret = -EBUSY; >> + goto err_unpin; >> + } else if (ret) >> + goto err_unpin; >> >> - i915_gem_object_pin_fence(obj); >> + i915_gem_object_pin_fence(obj); >> + } >> >> dev_priv->mm.interruptible = true; >> intel_runtime_pm_put(dev_priv); >> @@ -2460,7 +2462,9 @@ static void intel_unpin_fb_obj(struct drm_framebuffer *fb, >> ret = intel_fill_fb_ggtt_view(&view, fb, plane_state); >> WARN_ONCE(ret, "Couldn't get view from plane state!"); >> >> - i915_gem_object_unpin_fence(obj); >> + if (view.type == I915_GGTT_VIEW_NORMAL) >> + i915_gem_object_unpin_fence(obj); >> + >> i915_gem_object_unpin_from_display_plane(obj, &view); >> } >> >> -- >> 2.4.3
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2fdfca1..9c80968 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2419,22 +2419,24 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane, * framebuffer compression. For simplicity, we always install * a fence as the cost is not that onerous. */ - ret = i915_gem_object_get_fence(obj); - if (ret == -EDEADLK) { - /* - * -EDEADLK means there are no free fences - * no pending flips. - * - * This is propagated to atomic, but it uses - * -EDEADLK to force a locking recovery, so - * change the returned error to -EBUSY. - */ - ret = -EBUSY; - goto err_unpin; - } else if (ret) - goto err_unpin; + if (view.type == I915_GGTT_VIEW_NORMAL) { + ret = i915_gem_object_get_fence(obj); + if (ret == -EDEADLK) { + /* + * -EDEADLK means there are no free fences + * no pending flips. + * + * This is propagated to atomic, but it uses + * -EDEADLK to force a locking recovery, so + * change the returned error to -EBUSY. + */ + ret = -EBUSY; + goto err_unpin; + } else if (ret) + goto err_unpin; - i915_gem_object_pin_fence(obj); + i915_gem_object_pin_fence(obj); + } dev_priv->mm.interruptible = true; intel_runtime_pm_put(dev_priv); @@ -2460,7 +2462,9 @@ static void intel_unpin_fb_obj(struct drm_framebuffer *fb, ret = intel_fill_fb_ggtt_view(&view, fb, plane_state); WARN_ONCE(ret, "Couldn't get view from plane state!"); - i915_gem_object_unpin_fence(obj); + if (view.type == I915_GGTT_VIEW_NORMAL) + i915_gem_object_unpin_fence(obj); + i915_gem_object_unpin_from_display_plane(obj, &view); }
While pinning a fb object to the display plane, only install a fence if the object is using a normal view. This corresponds with the behavior found in i915_gem_object_do_pin() where the fencability criteria is determined only for objects with normal views. v2: Look at the object's map_and_fenceable flag to determine whether to install a fence or not (Chris). v3: Pin and unpin a fence only if the current view type is normal. v4: Extend the "view type is normal" check for pin_fence as well. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> --- drivers/gpu/drm/i915/intel_display.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-)