| Message ID | 564050BF.8060606@linux.intel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Jiang Liu wrote on 09/11/15 18:22: > Hi Arthur, > Could you please help to try the attached test patch? > Thanks, > Gerry > Thanks, I applied the patch, rebuilt and installed the resulting kernel and it booted fine. dmesg output from booting with this patch applied attached. Arthur. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0+ (root@victoria) (gcc version 5.2.1 20151028 (Debian 5.2.1-23) ) #117 SMP PREEMPT Mon Nov 9 20:43:20 ACDT 2015 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003ffbe000-0x000000003ffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003ffe0000-0x000000003fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: System manufacturer System Product Name/A8V-MX, BIOS 0503 12/06/2005 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 4M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x36ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x36ffffff] page 4M [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x02081000, 0x02081fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3f890000-0x3ffa6fff] [ 0.000000] Allocated new RAMDISK: [mem 0x370e7000-0x377fd4d9] [ 0.000000] Move RAMDISK from [mem 0x3f890000-0x3ffa64d9] to [mem 0x370e7000-0x377fd4d9] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FAC60 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I OEMXSDT 12000506 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I OEMFACP 12000506 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000003FFB03F0 0046F0 (v01 A0347 A0347001 00000001 INTL 02002026) [ 0.000000] ACPI: FACS 0x000000003FFBE000 000040 [ 0.000000] ACPI: FACS 0x000000003FFBE000 000040 [ 0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I OEMAPIC 12000506 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000003FFBE040 000046 (v01 A M I AMI_OEM 12000506 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x02082000, 0x02082fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003ffaffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffaffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff] [ 0.000000] On node 0 totalpages: 261966 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1962 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 34738 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] microcode: AMD CPU family 0xf not supported [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 18 pages/cpu @f6748000 s41128 r0 d32600 u73728 [ 0.000000] pcpu-alloc: s41128 r0 d32600 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0+ root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 1012972K/1047864K available (5517K kernel code, 548K rwdata, 2092K rodata, 516K init, 8152K bss, 34892K reserved, 0K cma-reserved, 138952K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc17fb000 - 0xc187c000 ( 516 kB) .data : 0xc15638cd - 0xc17f9240 (2646 kB) .text : 0xc1000000 - 0xc15638cd (5518 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Running RCU self tests [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 [ 0.000000] CPU 0 irqstacks, hard=f6016000 soft=f6018000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 4911 kB [ 0.000000] per task-struct memory footprint: 1344 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing: ok | ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context: ok | ok | ok | [ 0.000000] try: ok | ok | ok | [ 0.000000] block: ok | ok | ok | [ 0.000000] spinlock: ok | ok | ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 253 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1000.093 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.000185] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.18 BogoMIPS (lpj=4000372) [ 0.000314] pid_max: default: 32768 minimum: 301 [ 0.000471] ACPI: Core revision 20150930 [ 0.004000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.004000] Security Framework initialized [ 0.004000] Yama: becoming mindful. [ 0.004000] AppArmor: AppArmor disabled by boot time parameter [ 0.004000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004000] Initializing cgroup subsys io [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] Initializing cgroup subsys perf_event [ 0.004000] Initializing cgroup subsys net_prio [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.004000] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.004000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.044000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (family: 0xf, model: 0x2f, stepping: 0x2) [ 0.044000] Performance Events: AMD PMU driver. [ 0.044000] ... version: 0 [ 0.044000] ... bit width: 48 [ 0.044000] ... generic registers: 4 [ 0.044000] ... value mask: 0000ffffffffffff [ 0.044000] ... max period: 00007fffffffffff [ 0.044000] ... fixed-purpose events: 0 [ 0.044000] ... event mask: 000000000000000f [ 0.064121] x86: Booted up 1 node, 1 CPUs [ 0.064192] smpboot: Total of 1 processors activated (2000.18 BogoMIPS) [ 0.065798] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.067279] devtmpfs: initialized [ 0.076278] PM: Registering ACPI NVS region [mem 0x3ffbe000-0x3ffdffff] (139264 bytes) [ 0.076885] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.080229] pinctrl core: initialized pinctrl subsystem [ 0.081869] NET: Registered protocol family 16 [ 0.092080] cpuidle: using governor ladder [ 0.104036] cpuidle: using governor menu [ 0.104112] node 0 link 0: io port [1000, ffffff] [ 0.104120] TOM: 0000000040000000 aka 1024M [ 0.104188] node 0 link 0: mmio [a0000, bffff] [ 0.104197] node 0 link 0: mmio [40000000, ffffffff] [ 0.104205] bus: [bus 00-ff] on node 0 link 0 [ 0.104210] bus: 00 [io 0x0000-0xffff] [ 0.104215] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.104220] bus: 00 [mem 0x40000000-0xffffffff] [ 0.104422] ACPI: bus type PCI registered [ 0.104489] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.106932] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.107000] PCI: Using configuration type 1 for base access [ 0.144320] ACPI: Added _OSI(Module Device) [ 0.144391] ACPI: Added _OSI(Processor Device) [ 0.144457] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.144523] ACPI: Added _OSI(Processor Aggregator Device) [ 0.160273] ACPI: Executed 1 blocks of module-level executable AML code [ 0.171798] ACPI: Interpreter enabled [ 0.171902] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.172072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580) [ 0.172339] ACPI: (supports S0 S1 S4 S5) [ 0.172403] ACPI: Using IOAPIC for interrupt routing [ 0.172636] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.222305] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.222390] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.222622] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.222856] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.223250] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.223258] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.223265] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.223272] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.223279] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored) [ 0.223286] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff window] (ignored) [ 0.223291] PCI: root bus 00: hardware-probed resources [ 0.225366] PCI host bridge to bus 0000:00 [ 0.225437] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.225506] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.225575] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.225646] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff] [ 0.225719] pci_bus 0000:00: busn_res: can not insert [bus 00-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.225725] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.225963] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000 [ 0.226015] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] [ 0.227235] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000 [ 0.227956] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000 [ 0.228660] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000 [ 0.229344] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000 [ 0.230021] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000 [ 0.230736] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400 [ 0.230860] pci 0000:00:01.0: supports D1 [ 0.231476] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a [ 0.231586] pci 0000:00:0f.0: reg 0x20: [io 0xfc00-0xfc0f] [ 0.231631] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.231703] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.231776] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.231849] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.232529] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.232637] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f] [ 0.232725] pci 0000:00:10.0: supports D1 D2 [ 0.232732] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.233232] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.233653] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.233762] pci 0000:00:10.1: reg 0x20: [io 0xe880-0xe89f] [ 0.233852] pci 0000:00:10.1: supports D1 D2 [ 0.233858] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.234182] pci 0000:00:10.1: System wakeup disabled by ACPI [ 0.234607] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.234714] pci 0000:00:10.2: reg 0x20: [io 0xe800-0xe81f] [ 0.234802] pci 0000:00:10.2: supports D1 D2 [ 0.234809] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.235133] pci 0000:00:10.2: System wakeup disabled by ACPI [ 0.235552] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300 [ 0.235659] pci 0000:00:10.3: reg 0x20: [io 0xe480-0xe49f] [ 0.235747] pci 0000:00:10.3: supports D1 D2 [ 0.235754] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.236097] pci 0000:00:10.3: System wakeup disabled by ACPI [ 0.236525] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 [ 0.236580] pci 0000:00:10.4: reg 0x10: [mem 0xff6ffc00-0xff6ffcff] [ 0.236736] pci 0000:00:10.4: supports D1 D2 [ 0.236742] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.237069] pci 0000:00:10.4: System wakeup disabled by ACPI [ 0.237497] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100 [ 0.238284] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000 [ 0.238997] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000 [ 0.239045] pci 0000:00:12.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.239068] pci 0000:00:12.0: reg 0x14: [mem 0xff6ff800-0xff6ff8ff] [ 0.239202] pci 0000:00:12.0: supports D1 D2 [ 0.239208] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.239533] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.239952] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400 [ 0.240619] pci 0000:00:13.1: [1106:287a] type 01 class 0x060400 [ 0.241015] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.241464] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.242082] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.242686] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.243287] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.244156] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000 [ 0.244206] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff pref] [ 0.244225] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff] [ 0.244245] pci 0000:01:00.0: reg 0x18: [mem 0xff4f0000-0xff4fffff] [ 0.244302] pci 0000:01:00.0: reg 0x30: [mem 0xff4c0000-0xff4dffff pref] [ 0.244375] pci 0000:01:00.0: supports D1 D2 [ 0.244687] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000 [ 0.244728] pci 0000:01:00.1: reg 0x10: [mem 0x90000000-0x9fffffff pref] [ 0.244747] pci 0000:01:00.1: reg 0x14: [mem 0xff4e0000-0xff4effff] [ 0.244875] pci 0000:01:00.1: supports D1 D2 [ 0.245237] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.245310] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff] [ 0.245321] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff] [ 0.245332] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref] [ 0.245677] pci 0000:02:00.0: [1106:287c] type 01 class 0x060400 [ 0.245821] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.245949] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.246374] pci 0000:02:00.1: [1106:287d] type 01 class 0x060400 [ 0.246518] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.246967] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.247135] pci 0000:00:13.0: PCI bridge to [bus 02-04] [ 0.247448] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.247771] pci 0000:02:00.1: PCI bridge to [bus 04] [ 0.248148] pci 0000:05:0b.0: [1102:0004] type 00 class 0x040100 [ 0.248197] pci 0000:05:0b.0: reg 0x10: [io 0xd800-0xd83f] [ 0.248357] pci 0000:05:0b.0: supports D1 D2 [ 0.248665] pci 0000:05:0b.1: [1102:7003] type 00 class 0x098000 [ 0.248712] pci 0000:05:0b.1: reg 0x10: [io 0xdc00-0xdc07] [ 0.248870] pci 0000:05:0b.1: supports D1 D2 [ 0.249177] pci 0000:05:0b.2: [1102:4001] type 00 class 0x0c0010 [ 0.249226] pci 0000:05:0b.2: reg 0x10: [mem 0xff5ef800-0xff5effff] [ 0.249249] pci 0000:05:0b.2: reg 0x14: [mem 0xff5e8000-0xff5ebfff] [ 0.249398] pci 0000:05:0b.2: supports D1 D2 [ 0.249404] pci 0000:05:0b.2: PME# supported from D0 D1 D2 D3hot [ 0.249792] pci 0000:05:0c.0: [1044:a400] type 00 class 0x010000 [ 0.249827] pci 0000:05:0c.0: reg 0x10: [io 0xd880-0xd89f] [ 0.249924] pci 0000:05:0c.0: reg 0x30: [mem 0xff5f0000-0xff5f7fff pref] [ 0.250299] pci 0000:00:13.1: PCI bridge to [bus 05] [ 0.250373] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff] [ 0.250384] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff] [ 0.250423] pci_bus 0000:00: on NUMA node 0 [ 0.255766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.256840] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.257869] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.258897] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.259924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.260936] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.261985] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.263017] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.265513] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.265584] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.265676] vgaarb: loaded [ 0.265737] vgaarb: bridge control possible 0000:01:00.0 [ 0.268084] PCI: Using ACPI for IRQ routing [ 0.268158] PCI: pci_cache_line_size set to 64 bytes [ 0.268329] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.268354] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff] [ 0.270510] clocksource: Switched to clocksource refined-jiffies [ 0.309529] pnp: PnP ACPI init [ 0.310200] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.312658] pnp 00:01: [dma 3] [ 0.313320] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.313975] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.314168] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315037] system 00:03: [io 0x03e0-0x03e7] has been reserved [ 0.315114] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.315188] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.315262] system 00:03: [io 0x0400-0x041f] has been reserved [ 0.315338] system 00:03: [mem 0xff780000-0xffffffff] has been reserved [ 0.315414] system 00:03: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.315497] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316081] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.316159] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.316243] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316618] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.317084] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.318308] pnp 00:07: [dma 0 disabled] [ 0.318668] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.319096] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.319179] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.320490] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.320567] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.320643] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved [ 0.321827] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.322484] pnp: PnP ACPI: found 10 devices [ 0.372788] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.372920] clocksource: Switched to clocksource acpi_pm [ 0.373051] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.373122] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff] [ 0.373199] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff] [ 0.373274] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref] [ 0.373365] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.373450] pci 0000:02:00.1: PCI bridge to [bus 04] [ 0.373534] pci 0000:00:13.0: PCI bridge to [bus 02-04] [ 0.373620] pci 0000:00:13.1: PCI bridge to [bus 05] [ 0.373689] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff] [ 0.373764] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff] [ 0.373848] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.373855] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.373861] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff] [ 0.373867] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff] [ 0.373874] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff] [ 0.373880] pci_bus 0000:01: resource 2 [mem 0x7ff00000-0xbfefffff pref] [ 0.373887] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.373893] pci_bus 0000:05: resource 1 [mem 0xff500000-0xff5fffff] [ 0.374139] NET: Registered protocol family 2 [ 0.375575] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.375722] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.376133] TCP: Hash tables configured (established 8192 bind 8192) [ 0.376398] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.376620] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.377257] NET: Registered protocol family 1 [ 0.377367] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.377477] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.377801] pci 0000:01:00.0: Video device with shadowed ROM [ 0.377849] PCI: CLS 64 bytes, default 64 [ 0.378495] Unpacking initramfs... [ 0.863081] Freeing initrd memory: 7260K (f70e7000 - f77fe000) [ 0.863351] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe6a6eeaccc, max_idle_ns: 440795210637 ns [ 0.865683] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.865916] audit: initializing netlink subsys (disabled) [ 0.866151] audit: type=2000 audit(1447070290.864:1): initialized [ 0.867904] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.868739] VFS: Disk quotas dquot_6.6.0 [ 0.868867] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.874200] bounce: pool size: 64 pages [ 0.874328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.878756] io scheduler noop registered [ 0.878827] io scheduler deadline registered [ 0.878944] io scheduler cfq registered (default) [ 0.880188] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.880303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.882813] GHES: HEST is not enabled! [ 0.883162] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.904565] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.908080] Linux agpgart interface v0.103 [ 0.908216] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204] [ 0.918943] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.920594] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.921689] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.922706] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.923845] mousedev: PS/2 mouse device common for all mice [ 0.924761] rtc_cmos 00:00: RTC can wake from S4 [ 0.925629] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.925755] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram [ 0.926592] NET: Registered protocol family 10 [ 0.932291] mip6: Mobile IPv6 [ 0.932409] NET: Registered protocol family 17 [ 0.932496] mpls_gso: MPLS GSO support [ 0.933695] Using IPI No-Shortcut mode [ 0.934863] registered taskstats version 1 [ 0.945771] rtc_cmos 00:00: setting system clock to 2015-11-09 11:58:12 UTC (1447070292) [ 0.946377] PM: Hibernation image not present or could not be loaded. [ 0.947712] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.950717] Freeing unused kernel memory: 516K (c17fb000 - c187c000) [ 0.951023] Write protecting the kernel text: 5520k [ 0.951402] Write protecting the kernel read-only data: 2096k [ 1.135624] random: systemd-udevd urandom read with 0 bits of entropy available [ 1.431901] ACPI: bus type USB registered [ 1.446407] usbcore: registered new interface driver usbfs [ 1.446679] usbcore: registered new interface driver hub [ 1.448304] usbcore: registered new device driver usb [ 1.450089] SCSI subsystem initialized [ 1.451970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.457159] uhci_hcd: USB Universal Host Controller Interface driver [ 1.458412] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.459209] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 1.459546] uhci_hcd 0000:00:10.0: detected 2 ports [ 1.459879] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00 [ 1.460881] ehci-pci: EHCI PCI platform driver [ 1.463482] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 1.476452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.476532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.476614] usb usb1: Product: UHCI Host Controller [ 1.476681] usb usb1: Manufacturer: Linux 4.3.0+ uhci_hcd [ 1.476748] usb usb1: SerialNumber: 0000:00:10.0 [ 1.491373] hub 1-0:1.0: USB hub found [ 1.493609] hub 1-0:1.0: 2 ports detected [ 1.495361] eata_pci 0000:05:0c.0: warning, DMA protocol support not asserted. [ 1.495448] eata_pci 0000:05:0c.0: IRQ 10 mapped to IO-APIC IRQ 17. [ 1.495688] eata_pci 0000:05:0c.0: EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio. [ 1.495776] eata_pci 0000:05:0c.0: config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n, ep:n, pp:y. [ 1.495865] eata_pci 0000:05:0c.0: 2.0C, PCI 0xd890, IRQ 17, BMST, SG 122, MB 64. [ 1.495950] eata_pci 0000:05:0c.0: wide SCSI support enabled, max_id 16, max_lun 8. [ 1.496146] eata_pci 0000:05:0c.0: SCSI channel 0 enabled, host target ID 7. [ 1.496231] scsi host0: EATA/DMA 2.0x rev. 8.10.00 [ 1.504366] libata version 3.00 loaded. [ 1.516263] ehci-pci 0000:00:10.4: EHCI Host Controller [ 1.516418] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2 [ 1.516543] ehci-pci 0000:00:10.4: debug port 1 [ 1.516856] ehci-pci 0000:00:10.4: irq 22, io mem 0xff6ffc00 [ 1.528123] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 1.528710] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.528784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.528865] usb usb2: Product: EHCI Host Controller [ 1.528931] usb usb2: Manufacturer: Linux 4.3.0+ ehci_hcd [ 1.528998] usb usb2: SerialNumber: 0000:00:10.4 [ 1.530726] hub 2-0:1.0: USB hub found [ 1.530917] hub 2-0:1.0: 8 ports detected [ 1.557281] firewire_ohci 0000:05:0b.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.560674] hub 1-0:1.0: USB hub found [ 1.561443] hub 1-0:1.0: 2 ports detected [ 1.565760] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e000, 00:13:d4:cc:9b:57, IRQ 23 [ 1.566647] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1 [ 1.568169] pata_via 0000:00:0f.0: version 0.3.4 [ 1.583559] scsi host1: pata_via [ 1.592244] scsi host2: pata_via [ 1.592787] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.592859] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.594395] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.594497] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 1.594594] uhci_hcd 0000:00:10.1: detected 2 ports [ 1.594698] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880 [ 1.595099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.595171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.595252] usb usb3: Product: UHCI Host Controller [ 1.595318] usb usb3: Manufacturer: Linux 4.3.0+ uhci_hcd [ 1.595385] usb usb3: SerialNumber: 0000:00:10.1 [ 1.596701] hub 3-0:1.0: USB hub found [ 1.596817] hub 3-0:1.0: 2 ports detected [ 1.598333] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.598429] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 1.598527] uhci_hcd 0000:00:10.2: detected 2 ports [ 1.598673] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800 [ 1.603318] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.603398] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.603479] usb usb4: Product: UHCI Host Controller [ 1.603546] usb usb4: Manufacturer: Linux 4.3.0+ uhci_hcd [ 1.603613] usb usb4: SerialNumber: 0000:00:10.2 [ 1.608322] hub 4-0:1.0: USB hub found [ 1.608440] hub 4-0:1.0: 2 ports detected [ 1.613998] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 1.614103] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 1.614203] uhci_hcd 0000:00:10.3: detected 2 ports [ 1.614356] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480 [ 1.616415] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.616492] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.616573] usb usb5: Product: UHCI Host Controller [ 1.616640] usb usb5: Manufacturer: Linux 4.3.0+ uhci_hcd [ 1.616707] usb usb5: SerialNumber: 0000:00:10.3 [ 1.619130] hub 5-0:1.0: USB hub found [ 1.622214] hub 5-0:1.0: 2 ports detected [ 1.778643] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100 [ 1.778723] ata1.00: 625142448 sectors, multi 0: LBA48 [ 1.785228] ata1.00: configured for UDMA/100 [ 2.057791] firewire_core 0000:05:0b.2: created device fw0: GUID 00023c0153000612, S400 [ 3.069513] scsi 0:0:6:0: Direct-Access IBM DCAS-34330W S65A PQ: 0 ANSI: 2 [ 3.070714] scsi 0:0:6:0: cmds/lun 16, sorted, simple tags. [ 4.432632] floppy0: no floppy controllers found [ 4.432725] work still pending [ 5.151692] sd 0:0:6:0: [sda] 8466688 512-byte logical blocks: (4.33 GB/4.03 GiB) [ 5.153040] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5 [ 5.154932] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 5.155339] sd 1:0:0:0: [sdb] Write Protect is off [ 5.155411] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.155549] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.192056] sd 0:0:6:0: [sda] Write Protect is off [ 5.192134] sd 0:0:6:0: [sda] Mode Sense: b3 00 00 08 [ 5.210777] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 5.212926] sd 0:0:6:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.219587] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.294329] sda: sda1 sda2 < sda5 > [ 5.328457] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33 [ 5.328675] ata2.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100 [ 5.328746] ata2.01: 78242976 sectors, multi 0: LBA [ 5.328821] ata2.01: limited to UDMA/33 due to 40-wire cable [ 5.344284] ata2.00: configured for UDMA/33 [ 5.348888] sd 0:0:6:0: [sda] Attached SCSI disk [ 5.352400] ata2.01: configured for UDMA/33 [ 5.376547] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5 [ 5.393349] scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP4002H 0-57 PQ: 0 ANSI: 5 [ 5.395575] sd 2:0:1:0: [sdc] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 5.396205] sd 2:0:1:0: [sdc] Write Protect is off [ 5.396277] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.396423] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.445931] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > sdc3 [ 5.451668] sd 2:0:1:0: [sdc] Attached SCSI disk [ 5.485083] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.485178] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.487821] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.885302] random: nonblocking pool is initialized [ 6.903787] PM: Starting manual resume from disk [ 6.903893] PM: Hibernation image partition 8:21 present [ 6.903899] PM: Looking for hibernation image. [ 6.905362] PM: Image not found (code -22) [ 6.905369] PM: Hibernation image not present or could not be loaded. [ 6.919872] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 6.919883] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] [ 6.919892] PM: Basic memory bitmaps created [ 6.920902] PM: Basic memory bitmaps freed [ 7.335035] EXT4-fs (sdb7): mounting ext3 file system using the ext4 subsystem [ 7.400965] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 12.256985] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 12.257091] ACPI: Sleep Button [SLPB] [ 12.257557] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 12.257648] ACPI: Power Button [PWRB] [ 12.258101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 12.258189] ACPI: Power Button [PWRF] [ 12.384924] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.517756] parport_pc 00:01: reported by Plug and Play ACPI [ 12.518345] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 12.680422] sd 0:0:6:0: Attached scsi generic sg0 type 0 [ 12.681494] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 12.681829] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 12.684131] sd 2:0:1:0: Attached scsi generic sg3 type 0 [ 12.766846] [drm] Initialized drm 1.1.0 20060810 [ 13.400900] gameport gameport0: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xdc00, speed 1046kHz [ 13.643634] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 13.865522] EDAC MC: Ver: 3.0.0 [ 13.891387] MCE: In-kernel MCE decoding enabled. [ 13.911474] AMD64 EDAC driver v3.4.0 [ 13.911658] EDAC amd64: DRAM ECC enabled. [ 13.911728] EDAC amd64: K8 revE or earlier detected (node 0). [ 13.916866] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) [ 13.917526] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) [ 13.917615] EDAC amd64: amd64_edac on 32-bit is unsupported. USE AT YOUR OWN RISK! [ 14.088496] [drm] radeon kernel modesetting enabled. [ 14.102317] [drm] initializing kernel modesetting (RV350 0x1002:0x4153 0x1458:0x4050). [ 14.102530] [drm] register mmio base: 0xFF4F0000 [ 14.102596] [drm] register mmio size: 65536 [ 14.104312] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 14.108161] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 14.108371] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 14.108504] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF [ 14.108575] [drm] Generation 2 PCI interface, using max accessible memory [ 14.108649] radeon 0000:01:00.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used) [ 14.108808] [drm] Detected VRAM RAM=256M, BAR=256M [ 14.108873] [drm] RAM width 128bits DDR [ 14.112599] [TTM] Zone kernel: Available graphics memory: 440898 kiB [ 14.112673] [TTM] Zone highmem: Available graphics memory: 510374 kiB [ 14.112741] [TTM] Initializing pool allocator [ 14.112892] [TTM] Initializing DMA pool allocator [ 14.114734] [drm] radeon: 256M of VRAM memory ready [ 14.114804] [drm] radeon: 256M of GTT memory ready. [ 14.115206] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 14.117395] powernow_k8: fid 0xc (2000 MHz), vid 0x6 [ 14.117467] powernow_k8: fid 0xa (1800 MHz), vid 0x8 [ 14.117532] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 [ 14.122593] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00) [ 14.132333] radeon 0000:01:00.0: WB disabled [ 14.132399] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf8022000 [ 14.132479] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.132539] [drm] Driver supports precise vblank timestamp query. [ 14.132811] [drm] radeon: irq initialized. [ 14.132905] [drm] Loading R300 Microcode [ 14.319517] Error: Driver 'pcspkr' is already registered, aborting... [ 14.418480] ppdev: user-space parallel port driver [ 14.673953] [drm] radeon: ring at 0x00000000D0001000 [ 14.674168] [drm] ring test succeeded in 0 usecs [ 14.674943] [drm] ib test succeeded in 0 usecs [ 14.687045] [drm] Radeon Display Connectors [ 14.687108] [drm] Connector 0: [ 14.687164] [drm] VGA-1 [ 14.687219] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 14.687278] [drm] Encoders: [ 14.687332] [drm] CRT1: INTERNAL_DAC1 [ 14.687388] [drm] Connector 1: [ 14.687442] [drm] DVI-I-1 [ 14.687497] [drm] HPD1 [ 14.687552] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 14.687610] [drm] Encoders: [ 14.687664] [drm] CRT2: INTERNAL_DAC2 [ 14.687720] [drm] DFP1: INTERNAL_TMDS1 [ 14.687776] [drm] Connector 2: [ 14.687830] [drm] SVIDEO-1 [ 14.687884] [drm] Encoders: [ 14.687939] [drm] TV1: INTERNAL_DAC2 [ 14.786432] snd_emu10k1 0000:05:0b.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350] [ 14.937682] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 15.024526] [drm] fb mappable at 0xA0040000 [ 15.024589] [drm] vram apper at 0xA0000000 [ 15.024645] [drm] size 8294400 [ 15.024700] [drm] fb depth is 24 [ 15.024755] [drm] pitch is 7680 [ 15.026717] fbcon: radeondrmfb (fb0) is primary device [ 15.326279] Console: switching to colour frame buffer device 240x67 [ 15.516650] floppy0: no floppy controllers found [ 15.633082] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 15.644123] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0 [ 17.681322] ata1.00: configured for UDMA/100 [ 17.681715] ata1: EH complete [ 17.780260] ata2.00: configured for UDMA/33 [ 17.788338] ata2.01: configured for UDMA/33 [ 17.788714] ata2: EH complete [ 18.785836] Adding 2200868k swap on /dev/sdb5. Priority:-1 extents:1 across:2200868k [ 18.885416] EXT4-fs (sdb7): re-mounted. Opts: (null) [ 19.429901] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,data=ordered [ 20.599743] lp0: using parport0 (interrupt-driven). [ 20.696129] Loading iSCSI transport class v2.0-870. [ 20.727735] iscsi: registered transport (tcp) [ 20.863433] fuse init (API version 7.23) [ 21.051012] tun: Universal TUN/TAP device driver, 1.6 [ 21.078864] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 21.160142] w83627ehf: Found W83627EHG chip at 0x290 [ 21.190309] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150930/utaddress-254) [ 21.218122] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 54.782319] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 54.840970] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 54.917216] FAT-fs (sdb6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 103.007117] sd 0:0:6:0: [sda] Synchronizing SCSI cache [ 103.123576] eata_pci 0000:05:0c.0: warning, DMA protocol support not asserted. [ 103.123586] eata_pci 0000:05:0c.0: IRQ 10 mapped to IO-APIC IRQ 17. [ 103.123630] eata_pci 0000:05:0c.0: EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio. [ 103.123635] eata_pci 0000:05:0c.0: config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n, ep:n, pp:y. [ 103.123639] eata_pci 0000:05:0c.0: 2.0C, PCI 0xd890, IRQ 17, BMST, SG 122, MB 64. [ 103.123643] eata_pci 0000:05:0c.0: wide SCSI support enabled, max_id 16, max_lun 8. [ 103.123646] eata_pci 0000:05:0c.0: SCSI channel 0 enabled, host target ID 7. [ 103.123657] scsi host3: EATA/DMA 2.0x rev. 8.10.00 [ 104.705155] scsi 3:0:6:0: Direct-Access IBM DCAS-34330W S65A PQ: 0 ANSI: 2 [ 104.705169] scsi 3:0:6:0: cmds/lun 16, sorted, simple tags. [ 106.804665] sd 3:0:6:0: Attached scsi generic sg0 type 0 [ 106.806990] sd 3:0:6:0: [sda] 8466688 512-byte logical blocks: (4.33 GB/4.03 GiB) [ 106.842143] sd 3:0:6:0: [sda] Write Protect is off [ 106.842154] sd 3:0:6:0: [sda] Mode Sense: b3 00 00 08 [ 106.863054] sd 3:0:6:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 106.944531] sda: sda1 sda2 < sda5 > [ 107.012649] sd 3:0:6:0: [sda] Attached SCSI disk [ 149.939163] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 165.916741] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
From 02818ba34bfa76d93f2a29c85660da0323b0b457 Mon Sep 17 00:00:00 2001 From: Liu Jiang <jiang.liu@linux.intel.com> Date: Mon, 9 Nov 2015 13:36:48 +0800 Subject: [PATCH] Signed-off-by: Liu Jiang <jiang.liu@linux.intel.com> --- arch/x86/pci/bus_numa.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index 7bcf06a7cd12..022d83158cdb 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -51,6 +51,8 @@ void x86_pci_root_bus_resources(int bus, struct list_head *resources) pci_add_resource(resources, &info->busn); list_for_each_entry(root_res, &info->resources, list) { + pci_add_resource(resources, &root_res->res); +#if 0 struct resource *res; struct resource *root; @@ -61,6 +63,7 @@ void x86_pci_root_bus_resources(int bus, struct list_head *resources) else root = &iomem_resource; insert_resource(root, res); +#endif } return; -- 1.7.10.4